Changes between Version 3 and Version 4 of TracInstall


Ignore:
Timestamp:
Feb 16, 2019, 9:02:35 AM (3 months ago)
Author:
trac
Comment:

--

Legend:

Unmodified
Added
Removed
Modified
  • TracInstall

    v3 v4  
    1 = Trac Installation Guide for 0.12 =
     1= Trac Installation Guide for 1.2
    22[[TracGuideToc]]
    33
    44Trac is written in the Python programming language and needs a database, [http://sqlite.org/ SQLite], [http://www.postgresql.org/ PostgreSQL], or [http://mysql.com/ MySQL]. For HTML rendering, Trac uses the [http://genshi.edgewall.org Genshi] templating system.
    55
    6 Since version 0.12, Trac can also be localized, and there's probably a translation available for your language. If you want to be able to use the Trac interface in other languages, then make sure you **first** have installed the optional package [#OtherPythonPackages Babel]. Lacking Babel, you will only get the default english version, as usual. If you install Babel later on, you will need to re-install Trac.
    7 
    8 If you're interested in contributing new translations for other languages or enhance the existing translations, then please have a look at [trac:wiki:TracL10N TracL10N].
    9 
    10 What follows are generic instructions for installing and setting up Trac and its requirements. While you may find instructions for installing Trac on specific systems at TracInstallPlatforms on the main Trac site, please be sure to '''first read through these general instructions''' to get a good understanding of the tasks involved.
     6Trac can also be localized, and there is probably a translation available in your language. If you want to use the Trac interface in other languages, then make sure you have installed the optional package [#OtherPythonPackages Babel]. Pay attention to the extra steps for localization support in the [#InstallingTrac Installing Trac] section below. Lacking Babel, you will only get the default English version.
     7
     8If you're interested in contributing new translations for other languages or enhancing the existing translations, then please have a look at [trac:wiki:TracL10N TracL10N].
     9
     10What follows are generic instructions for installing and setting up Trac. While you may find instructions for installing Trac on specific systems at [trac:TracInstallPlatforms TracInstallPlatforms], please '''first read through these general instructions''' to get a good understanding of the tasks involved.
    1111
    1212[[PageOutline(2-3,Installation Steps,inline)]]
    1313
    14 == Dependencies ==
     14== Dependencies
    1515=== Mandatory Dependencies
    1616To install Trac, the following software packages must be installed:
    1717
    18  * [http://www.python.org/ Python], version >= 2.4 and < 3.0
    19    (note that we dropped the support for Python 2.3 in this release)
    20  * [http://peak.telecommunity.com/DevCenter/setuptools setuptools], version >= 0.6
     18 * [http://www.python.org/ Python], version >= 2.6 and < 3.0
     19   (note that we dropped the support for Python 2.5 in this release)
     20 * [http://pypi.python.org/pypi/setuptools setuptools], version >= 0.6
    2121 * [http://genshi.edgewall.org/wiki/Download Genshi], version >= 0.6
    2222
    23 You also need a database system and the corresponding python bindings.
    24 The database can be either SQLite, PostgreSQL or MySQL.
     23You also need a database system and the corresponding python bindings. The database can be either SQLite, PostgreSQL or MySQL.
    2524
    2625==== For the SQLite database #ForSQLite
    2726
    28 If you're using Python 2.5 or 2.6, you already have everything you need.
    29 
    30 If you're using Python 2.4 and need pysqlite, you can download from
    31 [http://code.google.com/p/pysqlite/downloads/list google code] the Windows installers or the tar.gz archive for building from source:
    32 {{{
    33 $ tar xvfz <version>.tar.gz
    34 $ cd <version>
    35 $ python setup.py build_static install
    36 }}}
    37  
    38 This will extract the SQLite code and build the bindings.
    39 
    40 To install SQLite, your system may require the development headers. Without these you will get various GCC related errors when attempting to build:
    41 
    42 {{{
    43 $ apt-get install libsqlite3-dev
    44 }}}
    45 
    46 SQLite 2.x is no longer supported, and neither is !PySqlite 1.1.x.
    47 
    48 A known bug !PySqlite versions 2.5.2-4 prohibits upgrade of trac databases
    49 from 0.11.x to 0.12. Please use versions 2.5.5 and newer or 2.5.1 and
    50 older. See [trac:#9434] for more detail.
    51 
    52 See additional information in [trac:PySqlite].
     27As you must be using Python 2.6 or 2.7, you already have the SQLite database bindings bundled with the standard distribution of Python (the `sqlite3` module).
     28
     29Optionally, you may install a newer version of [http://pypi.python.org/pypi/pysqlite pysqlite] than the one provided by the Python distribution. See [trac:PySqlite#ThePysqlite2bindings PySqlite] for details.
    5330
    5431==== For the PostgreSQL database #ForPostgreSQL
     
    5633You need to install the database and its Python bindings:
    5734 * [http://www.postgresql.org/ PostgreSQL], version 8.0 or later
    58  * [http://pypi.python.org/pypi/psycopg2 psycopg2]
     35 * [http://pypi.python.org/pypi/psycopg2 psycopg2], version 2.0 or later
    5936
    6037See [trac:DatabaseBackend#Postgresql DatabaseBackend] for details.
    6138
    62 
    6339==== For the MySQL database #ForMySQL
    6440
    65 Trac can now work quite well with MySQL, provided you follow the guidelines.
     41Trac works well with MySQL, provided you follow the guidelines:
    6642
    6743 * [http://mysql.com/ MySQL], version 5.0 or later
    6844 * [http://sf.net/projects/mysql-python MySQLdb], version 1.2.2 or later
    6945
    70 It is '''very''' important to read carefully the [trac:MySqlDb] page before creating the database.
     46Given the caveats and known issues surrounding MySQL, read carefully the [trac:MySqlDb] page before creating the database.
    7147
    7248=== Optional Dependencies
    7349
    74 ==== Version Control System ====
    75 
    76 ===== Subversion =====
    77  * [http://subversion.apache.org/ Subversion], 1.5.x or 1.6.x and the '''''corresponding''''' Python bindings. Older versions starting from 1.4.0, etc. should still work. For troubleshooting information, check the [trac:TracSubversion#Troubleshooting TracSubversion] page. Versions prior to 1.4.0 won't probably work since trac uses svn core functionality (e.g. svn_path_canonicalize) that is not implemented in the python swig wrapper in svn <= 1.3.x (although it exists in the svn lib itself).
    78 
    79 There are [http://subversion.apache.org/packages.html pre-compiled SWIG bindings] available for various platforms. (Good luck finding precompiled SWIG bindings for any Windows package at that listing. TracSubversion points you to [http://alagazam.net Algazam], which works for me under Python 2.6.)
    80 
    81 Note that Trac '''doesn't''' use [http://pysvn.tigris.org/ PySVN], neither does it work yet with the newer `ctype`-style bindings. [Is there a ticket for implementing ctype bindings?]
    82 
    83 
    84 '''Please note:''' if using Subversion, Trac must be installed on the '''same machine'''. Remote repositories are currently [trac:ticket:493 not supported].
    85 
    86 
    87 ===== Others =====
    88 
    89 Support for other version control systems is provided via third-parties. See [trac:PluginList] and [trac:VersioningSystemBackend].
    90 
    91 ==== Web Server ====
    92 A web server is optional because Trac is shipped with a server included, see the [#RunningtheStandaloneServer Running the Standalone Server ] section below.
    93 
    94 Alternatively you configure Trac to run in any of the following environments.
     50==== Subversion
     51
     52[http://subversion.apache.org/ Subversion], 1.6.x or later and the '''''corresponding''''' Python bindings.
     53
     54There are [http://subversion.apache.org/packages.html pre-compiled SWIG bindings] available for various platforms. (Good luck finding precompiled SWIG bindings for any Windows package at that listing. [trac:TracSubversion] points you to [http://alagazam.net Alagazam], which works for me under Python 2.6.)
     55
     56For troubleshooting information, see the [trac:TracSubversion#Troubleshooting TracSubversion] page.
     57
     58{{{#!div style="border: 1pt dotted; margin: 1em"
     59**Note:**
     60* Trac '''doesn't''' use [http://pysvn.tigris.org/ PySVN], nor does it work yet with the newer `ctype`-style bindings.
     61* If using Subversion, Trac must be installed on the '''same machine'''. Remote repositories are currently [trac:ticket:493 not supported].
     62}}}
     63
     64==== Git
     65
     66[http://git-scm.com/ Git] 1.5.6 or later is supported. More information is available on the [trac:TracGit] page.
     67
     68==== Other Version Control Systems
     69
     70Support for other version control systems is provided via third-party plugins. See [trac:PluginList#VersionControlSystems] and [trac:VersionControlSystem].
     71
     72==== Web Server
     73A web server is optional because Trac is shipped with a server included, see the [#RunningtheStandaloneServer Running the Standalone Server] section below.
     74
     75Alternatively you can configure Trac to run in any of the following environments:
    9576 * [http://httpd.apache.org/ Apache] with
    96    - [http://code.google.com/p/modwsgi/ mod_wsgi], see [wiki:TracModWSGI] and
    97      http://code.google.com/p/modwsgi/wiki/IntegrationWithTrac
    98    - [http://modpython.org/ mod_python 3.3.1], deprecated: see TracModPython)
     77  * [https://github.com/GrahamDumpleton/mod_wsgi mod_wsgi], see [wiki:TracModWSGI] and [http://code.google.com/p/modwsgi/wiki/IntegrationWithTrac ModWSGI IntegrationWithTrac].
     78  * [http://modpython.org/ mod_python 3.5.0], see TracModPython
    9979 * a [http://www.fastcgi.com/ FastCGI]-capable web server (see TracFastCgi)
    10080 * an [http://tomcat.apache.org/connectors-doc/ajp/ajpv13a.html AJP]-capable web
    101    server (see [trac:TracOnWindowsIisAjp])
     81   server (see [trac:TracOnWindowsIisAjp TracOnWindowsIisAjp])
     82 * Microsoft IIS with FastCGI and a FastCGI-to-WSGI gateway (see [trac:CookBook/Installation/TracOnWindowsIisWfastcgi IIS with FastCGI])
    10283 * a CGI-capable web server (see TracCgi), '''but usage of Trac as a cgi script
    10384   is highly discouraged''', better use one of the previous options.
    10485   
    10586
    106 ==== Other Python Packages ====
    107 
    108  * [http://babel.edgewall.org Babel], version >= 0.9.5,
    109    needed for localization support[[BR]]
    110    ''Note: '' If you want to be able to use the Trac interface in other languages, then make sure you first have installed the optional package Babel. Lacking Babel, you will only get the default english version, as usual. If you install Babel later on, you will need to re-install Trac.
     87==== Other Python Packages
     88
     89 * [http://babel.edgewall.org Babel], version 0.9.6 or >= 1.3,
     90   needed for localization support
    11191 * [http://docutils.sourceforge.net/ docutils], version >= 0.3.9
    11292   for WikiRestructuredText.
    113  * [http://pygments.pocoo.org Pygments] for
    114    [wiki:TracSyntaxColoring syntax highlighting].
    115    [http://silvercity.sourceforge.net/ SilverCity] and/or
    116    [http://gnu.org/software/enscript/enscript.html Enscript] may still be used
    117    but are deprecated and you really should be using Pygments.
     93 * [http://pygments.org Pygments] for
     94   [TracSyntaxColoring syntax highlighting].
    11895 * [http://pytz.sf.net pytz] to get a complete list of time zones,
    11996   otherwise Trac will fall back on a shorter list from
    12097   an internal time zone implementation.
    12198
    122 '''Attention''': The various available versions of these dependencies are not necessarily interchangable, so please pay attention to the version numbers above. If you are having trouble getting Trac to work please double-check all the dependencies before asking for help on the [trac:MailingList] or [trac:IrcChannel].
    123 
    124 Please refer to the documentation of these packages to find out how they are best installed. In addition, most of the [trac:TracInstallPlatforms platform-specific instructions] also describe the installation of the dependencies. Keep in mind however that the information there ''probably concern older versions of Trac than the one you're installing'' (there are even some pages that are still talking about Trac 0.8!).
    125 
    126 
    127 == Installing Trac ==
     99{{{#!div style="border: 1pt dotted; margin: 1em"
     100**Attention**: The available versions of these dependencies are not necessarily interchangeable, so please pay attention to the version numbers. If you are having trouble getting Trac to work, please double-check all the dependencies before asking for help on the [trac:MailingList] or [trac:IrcChannel].
     101}}}
     102
     103Please refer to the documentation of these packages to find out how they are best installed. In addition, most of the [trac:TracInstallPlatforms platform-specific instructions] also describe the installation of the dependencies. Keep in mind however that the information there ''probably concern older versions of Trac than the one you're installing''.
     104
     105== Installing Trac
     106
     107The [TracAdmin trac-admin] command-line tool, used to create and maintain [TracEnvironment project environments], as well as the [TracStandalone tracd] standalone server are installed along with Trac. There are several methods for installing Trac.
     108
     109It is assumed throughout this guide that you have elevated permissions as the `root` user or by prefixing commands with `sudo`. The umask `0002` should be used for a typical installation on a Unix-based platform.
     110
    128111=== Using `easy_install`
    129 One way to install Trac is using [http://pypi.python.org/pypi/setuptools setuptools].
    130 With setuptools you can install Trac from the subversion repository;
     112Trac can be installed from PyPI or the Subversion repository using [http://pypi.python.org/pypi/setuptools setuptools].
    131113
    132114A few examples:
    133115
    134  - first install of the latest stable version Trac 0.12.1, with i18n support:
    135    {{{
    136    easy_install Babel==0.9.5 Genshi==0.6
    137    easy_install Trac
    138    }}}
    139    ''It's very important to run the two `easy_install` commands separately, otherwise the message catalogs won't be generated.''
    140 
    141  - upgrade to the latest stable version of Trac:
    142    {{{
    143    easy_install -U Trac
    144    }}}
    145 
    146  - upgrade to the latest trunk development version (0.13dev):
    147    {{{
    148    easy_install -U Trac==dev
    149    }}}
    150 
    151 For upgrades, reading the TracUpgrade page is mandatory, of course.
    152 
    153 === From source
    154 If you want more control, you can download the source in archive form, or do a checkout from one of the official [[Trac:TracRepositories|source code repositories]].
    155 
    156 Be sure to have the prerequisites already installed. You can also obtain the Genshi and Babel source packages from http://www.edgewall.org and follow for them a similar installation procedure, or you can just easy_install those, see [#Usingeasy_install above].
    157 
    158 Once you've unpacked the Trac archive or performed the checkout, move in the top-level folder and do:
    159 {{{
    160 $ python ./setup.py install
    161 }}}
    162 
    163 ''You'll need root permissions or equivalent for this step.''
    164 
    165 This will byte-compile the python source code and install it as an .egg file or folder in the `site-packages` directory
    166 of your Python installation. The .egg will also contain all other resources needed by standard Trac, such as htdocs and templates.
    167 
    168 The script will also install the [wiki:TracAdmin trac-admin] command-line tool, used to create and maintain [wiki:TracEnvironment project environments], as well as the [wiki:TracStandalone tracd] standalone server.
    169 
    170 If you install from source and want to make Trac available in other languages, make sure  Babel is installed. Only then, perform the `install` (or simply redo the `install` once again afterwards if you realize Babel was not yet installed):
    171 {{{
    172 $ python ./setup.py install
    173 }}}
    174 Alternatively, you can do a `bdist_egg` and copy the .egg from dist/ to the place of your choice, or you can create a Windows installer (`bdist_wininst`).
    175 
    176 === Advanced Options ===
    177 
    178 To install Trac to a custom location, or find out about other advanced installation options, run:
    179 {{{
    180 easy_install --help
    181 }}}
    182 
    183 Also see [http://docs.python.org/inst/inst.html Installing Python Modules] for detailed information.
    184 
    185 Specifically, you might be interested in:
    186 {{{
    187 easy_install --prefix=/path/to/installdir
    188 }}}
    189 or, if installing Trac to a Mac OS X system:
    190 {{{
    191 easy_install --prefix=/usr/local --install-dir=/Library/Python/2.5/site-packages
    192 }}}
    193 Note: If installing on Mac OS X 10.6 running {{{ easy_install http://svn.edgewall.org/repos/trac/trunk }}} will install into {{{ /usr/local }}} and {{{ /Library/Python/2.6/site-packages }}} by default
    194 
    195 The above will place your `tracd` and `trac-admin` commands into `/usr/local/bin` and will install the Trac libraries and dependencies into `/Library/Python/2.5/site-packages`, which is Apple's preferred location for third-party Python application installations.
     116 - Install the latest stable version of Trac:
     117 {{{#!sh
     118$ easy_install Trac
     119}}}
     120 - Install latest development version:
     121 {{{#!sh
     122$ easy_install http://download.edgewall.org/trac/Trac-latest-dev.tar.gz
     123}}}
     124   Note that in this case you won't have the possibility to run a localized version of Trac;
     125   either use a released version or install from source
     126
     127More information can be found on the [trac:wiki:setuptools setuptools] page.
     128
     129{{{#!div style="border: 1pt dotted; margin: 1em"
     130**Setuptools Warning:** If the version of your setuptools is in the range 5.4 through 5.6, the environment variable `PKG_RESOURCES_CACHE_ZIP_MANIFESTS` must be set in order to avoid significant performance degradation. More information may be found in [#DeployingTrac Deploying Trac].
     131}}}
    196132
    197133=== Using `pip`
    198134'pip' is an easy_install replacement that is very useful to quickly install python packages.
    199 To get a trac installation up and running in less than 5 minutes:
    200 
    201 Assuming you want to have your entire pip installation in /opt/user/trac:
    202 
    203  -
    204 {{{
    205 pip -E /opt/user/trac install trac psycopg2
     135To get a Trac installation up and running in less than 5 minutes:
     136
     137Assuming you want to have your entire pip installation in `/opt/user/trac`
     138
     139 {{{#!sh
     140$ pip install trac psycopg2
    206141}}}
    207142or
    208  -
    209 {{{
    210 pip -E /opt/user/trac install trac mysql-python
    211 }}}
    212 
    213 Make sure your OS specific headers are available for pip to automatically build PostgreSQL (libpq-dev) or MySQL (libmysqlclient-dev) bindings.
    214 
    215 pip will automatically resolve all dependencies (like Genshi, pygments, etc.) and download the latest packages on pypi.python.org and create a self contained installation in /opt/user/trac .
    216 
    217 All commands (tracd, trac-admin) are available in /opt/user/trac/bin. This can also be leveraged for mod_python (using !PythonHandler directive) and mod_wsgi (using WSGIDaemonProcess directive)
    218 
    219 Additionally, you can install several trac plugins (listed [http://pypi.python.org/pypi?:action=search&term=trac&submit=search here]) through pip.
    220 
    221 
    222 
    223 == Creating a Project Environment ==
    224 
    225 A [TracEnvironment Trac environment] is the backend storage where Trac stores information like wiki pages, tickets, reports, settings, etc. An environment is basically a directory that contains a human-readable [TracIni configuration file], and various other files and directories.
    226 
    227 A new environment is created using [wiki:TracAdmin trac-admin]:
    228 {{{
     143 {{{#!sh
     144$ pip install trac mysql-python
     145}}}
     146
     147Make sure your OS specific headers are available for pip to automatically build PostgreSQL (`libpq-dev`) or MySQL (`libmysqlclient-dev`) bindings.
     148
     149pip will automatically resolve all dependencies (like Genshi, pygments, etc.), download the latest packages from pypi.python.org and create a self contained installation in `/opt/user/trac`.
     150
     151All commands (`tracd`, `trac-admin`) are available in `/opt/user/trac/bin`. This can also be leveraged for `mod_python` (using `PythonHandler` directive) and `mod_wsgi` (using `WSGIDaemonProcess` directive)
     152
     153Additionally, you can install several Trac plugins (listed [https://pypi.python.org/pypi?:action=browse&show=all&c=516 here]) through pip.
     154
     155=== From source
     156Using the python-typical setup at the top of the source directory also works. You can obtain the source for a .tar.gz or .zip file corresponding to a release (e.g. `Trac-1.0.tar.gz`) from the [trac:TracDownload] page, or you can get the source directly from the repository. See [trac:TracRepositories#OfficialSubversionrepository TracRepositories] for details.
     157
     158{{{#!sh
     159$ python ./setup.py install
     160}}}
     161
     162''You will need root permissions or equivalent for this step.''
     163
     164This will byte-compile the Python source code and install it as an .egg file or folder in the `site-packages` directory
     165of your Python installation. The .egg will also contain all other resources needed by standard Trac, such as `htdocs` and `templates`.
     166
     167If you install from source and want to make Trac available in other languages, make sure Babel is installed. Only then, perform the `install` (or simply redo the `install` once again afterwards if you realize Babel was not yet installed):
     168{{{#!sh
     169$ python ./setup.py install
     170}}}
     171Alternatively, you can run `bdist_egg` and copy the .egg from `dist/` to the place of your choice, or you can create a Windows installer (`bdist_wininst`).
     172
     173=== Using installer
     174
     175On Windows, Trac can be installed using the exe installers available on the [trac:TracDownload] page. Installers are available for the 32-bit and 64-bit versions of Python. Make sure to use the installer that matches the architecture of your Python installation.
     176
     177=== Using package manager
     178
     179Trac may be available in your platform's package repository. Note however, that the version provided by your package manager may not be the latest release.
     180
     181=== Advanced `easy_install` Options
     182
     183To install Trac to a custom location, or find out about other advanced installation options, run:
     184{{{#!sh
     185$ easy_install --help
     186}}}
     187
     188Also see [http://docs.python.org/2/install/index.html Installing Python Modules] for detailed information.
     189
     190Specifically, you might be interested in:
     191{{{#!sh
     192$ easy_install --prefix=/path/to/installdir
     193}}}
     194or, if installing Trac on a Mac OS X system:
     195{{{#!sh
     196$ easy_install --prefix=/usr/local --install-dir=/Library/Python/2.6/site-packages
     197}}}
     198
     199{{{#!div style="border: 1pt dotted; margin: 1em"
     200**Mac OS X Note:** On Mac OS X 10.6,  running `easy_install trac` will install into `/usr/local` and `/Library/Python/2.6/site-packages` by default.
     201
     202The `tracd` and `trac-admin` commands will be placed in `/usr/local/bin` and will install the Trac libraries and dependencies into `/Library/Python/2.6/site-packages`, which is Apple's preferred location for third-party Python application installations.
     203}}}
     204
     205== Creating a Project Environment
     206
     207A [TracEnvironment Trac environment] is the backend where Trac stores information like wiki pages, tickets, reports, settings, etc. An environment is a directory that contains a human-readable [TracIni configuration file], and other files and directories.
     208
     209A new environment is created using [TracAdmin trac-admin]:
     210{{{#!sh
    229211$ trac-admin /path/to/myproject initenv
    230212}}}
    231213
    232 [TracAdmin trac-admin] will prompt you for the information it needs to create the environment, such as the name of the project and the [TracEnvironment#DatabaseConnectionStrings database connection string]. If you're not sure what to specify for one of these options, just press `<Enter>` to use the default value.
    233 
    234 Using the default database connection string in particular will always work as long as you have SQLite installed.
    235 For the other [DatabaseBackend database backends] you should plan ahead and already have a database ready to use at this point.
    236 
    237 Since 0.12, Trac doesn't ask for a [TracEnvironment#SourceCodeRepository source code repository] anymore when creating an environment. Repositories can be [TracRepositoryAdmin added] afterward, or the version control support can be disabled completely if you don't need it.
    238 
    239 Also note that the values you specify here can be changed later by directly editing the [TracIni conf/trac.ini] configuration file.
     214You will be prompted for the information needed to create the environment: the name of the project and the [TracEnvironment#DatabaseConnectionStrings database connection string]. If you're not sure what to specify for any of these options, just press `<Enter>` to use the default value.
     215
     216Using the default database connection string will always work as long as you have SQLite installed. For the other [trac:DatabaseBackend database backends] you should plan ahead and already have a database ready to use at this point.
     217
     218Also note that the values you specify here can be changed later using TracAdmin or directly editing the [TracIni conf/trac.ini] configuration file.
     219
     220{{{#!div style="border: 1pt dotted; margin: 1em"
     221**Filesystem Warning:** When selecting the location of your environment, make sure that the filesystem on which the environment directory resides supports sub-second timestamps (i.e. **not** `ext2` or `ext3` on Linux, or HFS+ on OSX), as the modification time of the `conf/trac.ini` file will be monitored to decide whether an environment restart is needed or not. A too coarse-grained timestamp resolution may result in inconsistencies in Trac < 1.0.2. The best advice is to opt for a platform with sub-second timestamp resolution, regardless of the Trac version.
     222}}}
    240223
    241224Finally, make sure the user account under which the web front-end runs will have '''write permissions''' to the environment directory and all the files inside. This will be the case if you run `trac-admin ... initenv` as this user. If not, you should set the correct user afterwards. For example on Linux, with the web server running as user `apache` and group `apache`, enter:
    242 {{{
    243 # chown -R apache.apache /path/to/myproject
    244 }}}
     225{{{#!sh
     226$ chown -R apache:apache /path/to/myproject
     227}}}
     228
     229The actual username and groupname of the apache server may not be exactly `apache`, and are specified in the Apache configuration file by the directives `User` and `Group` (if Apache `httpd` is what you use).
    245230
    246231{{{#!div class=important
     
    248233}}}
    249234
    250 
    251 == Running the Standalone Server ==
    252 
    253 After having created a Trac environment, you can easily try the web interface by running the standalone server [wiki:TracStandalone tracd]:
    254 {{{
     235== Deploying Trac
     236
     237{{{#!div style="border: 1pt dotted; margin: 1em"
     238**Setuptools Warning:** If the version of your setuptools is in the range 5.4 through 5.6, the environment variable `PKG_RESOURCES_CACHE_ZIP_MANIFESTS` must be set in order to avoid significant performance degradation.
     239
     240If running `tracd`, the environment variable can be set system-wide or for just the user that runs the `tracd` process. There are several ways to accomplish this in addition to what is discussed here, and depending on the distribution of your OS.
     241
     242To be effective system-wide a shell script with the `export` statement may be added to `/etc/profile.d`. To be effective for a user session the `export` statement may be added to `~/.profile`.
     243{{{#!sh
     244export PKG_RESOURCES_CACHE_ZIP_MANIFESTS=1
     245}}}
     246
     247Alternatively, the variable can be set in the shell before executing `tracd`:
     248{{{#!sh
     249$ PKG_RESOURCES_CACHE_ZIP_MANIFESTS=1 tracd --port 8000 /path/to/myproject
     250}}}
     251
     252If running the Apache web server, !Ubuntu/Debian users should add the `export` statement to `/etc/apache2/envvars`. !RedHat/CentOS/Fedora should can add the `export` statement to `/etc/sysconfig/httpd`.
     253}}}
     254
     255=== Running the Standalone Server
     256
     257After having created a Trac environment, you can easily try the web interface by running the standalone server [TracStandalone tracd]:
     258{{{#!sh
    255259$ tracd --port 8000 /path/to/myproject
    256260}}}
    257261
    258262Then, fire up a browser and visit `http://localhost:8000/`. You should get a simple listing of all environments that `tracd` knows about. Follow the link to the environment you just created, and you should see Trac in action. If you only plan on managing a single project with Trac you can have the standalone server skip the environment list by starting it like this:
    259 {{{
     263{{{#!sh
    260264$ tracd -s --port 8000 /path/to/myproject
    261265}}}
    262266
    263 == Running Trac on a Web Server ==
    264 
    265 Trac provides various options for connecting to a "real" web server: [wiki:TracCgi CGI], [wiki:TracFastCgi FastCGI], [wiki:TracModWSGI mod_wsgi] and [wiki:TracModPython mod_python]. For decent performance, it is recommended that you use either FastCGI or mod_wsgi.
    266 
    267 Trac also supports [trac:TracOnWindowsIisAjp AJP] which may be your choice if you want to connect to IIS.
    268 
    269 ==== Generating the Trac cgi-bin directory ====
    270 
    271 In order for Trac to function properly with FastCGI you need to have a `trac.fcgi` file and for mod_wsgi a `trac.wsgi` file. These are Python scripts which load the appropriate Python code. They can be generated using the `deploy` option of [wiki:TracAdmin trac-admin].
    272 
    273 There is, however, a bit of a chicken-and-egg problem. The [wiki:TracAdmin trac-admin] command requires an existing environment to function, but complains if the deploy directory already exists. This is a problem, because environments are often stored in a subdirectory of the deploy. The solution is to do something like this:
    274 {{{
    275 mkdir -p /usr/share/trac/projects/my-project
    276 trac-admin /usr/share/trac/projects/my-project initenv
    277 trac-admin /usr/share/trac/projects/my-project deploy /tmp/deploy
    278 mv /tmp/deploy/* /usr/share/trac
    279 }}}
    280 
    281 ==== Setting up the Plugin Cache ====
    282 
    283 Some Python plugins need to be extracted to a cache directory. By default the cache resides in the home directory of the current user. When running Trac on a Web Server as a dedicated user (which is highly recommended) who has no home directory, this might prevent the plugins from starting. To override the cache location you can set the PYTHON_EGG_CACHE environment variable. Refer to your server documentation for detailed instructions on how to set environment variables.
    284 
    285 == Configuring Authentication ==
    286 
    287 The process of adding, removing, and configuring user accounts for authentication depends on the specific way you run Trac. The basic procedure is described in the [wiki:TracCgi#AddingAuthentication "Adding Authentication"] section on the TracCgi page. To learn how to setup authentication for the frontend you're using, please refer to one of the following pages:
    288 
    289  * TracStandalone if you use the standalone server, `tracd`.
    290  * TracCgi if you use the CGI or FastCGI web front ends.
    291  * [wiki:TracModWSGI] if you use the Apache mod_wsgi web front end.
    292  * TracModPython if you use the Apache mod_python web front end.
    293 
    294 
    295 == Automatic reference to the SVN changesets in Trac tickets ==
    296 
    297 You can configure SVN to automatically add a reference to the changeset into the ticket comments, whenever changes are committed to the repository. The description of the commit needs to contain one of the following formulas:
    298  * '''`Refs #123`''' - to reference this changeset in `#123` ticket
    299  * '''`Fixes #123`''' - to reference this changeset and close `#123` ticket with the default status ''fixed''
    300 
    301 This functionality requires a post-commit hook to be installed as described in [wiki:TracRepositoryAdmin#ExplicitSync TracRepositoryAdmin], and enabling the optional commit updater components by adding the following line to the `[components]` section of your [wiki:TracIni#components-section trac.ini], or enabling the components in the "Plugins" admin panel.
    302 {{{
    303 tracopt.ticket.commit_updater.* = enabled
    304 }}}
    305 For more information, see the documentation of the `CommitTicketUpdater` component in the "Plugins" admin panel.
    306 
    307 == Using Trac ==
     267=== Running Trac on a Web Server
     268
     269Trac provides various options for connecting to a "real" web server:
     270 - [TracFastCgi FastCGI]
     271 - [wiki:TracModWSGI Apache with mod_wsgi]
     272 - [TracModPython Apache with mod_python]
     273 - [TracCgi CGI] //(should not be used, as the performance is far from optimal)//
     274
     275Trac also supports [trac:TracOnWindowsIisAjp AJP] which may be your choice if you want to connect to IIS. Other deployment scenarios are possible: [trac:TracNginxRecipe nginx], [http://projects.unbit.it/uwsgi/wiki/Example#Traconapacheinasub-uri uwsgi], [trac:TracOnWindowsIisIsapi Isapi-wsgi] etc.
     276
     277==== Generating the Trac cgi-bin directory #cgi-bin
     278
     279Application scripts for CGI, FastCGI and mod-wsgi can be generated using the [TracAdmin trac-admin] `deploy` command:
     280[[TracAdminHelp(deploy)]]
     281
     282Grant the web server execution right on scripts in the `cgi-bin` directory.
     283
     284For example, the following yields a typical directory structure:
     285{{{#!sh
     286$ mkdir -p /var/trac
     287$ trac-admin /var/trac/<project> initenv
     288$ trac-admin /var/trac/<project> deploy /var/www
     289$ ls /var/www
     290cgi-bin htdocs
     291$ chmod ugo+x /var/www/cgi-bin/*
     292}}}
     293
     294==== Mapping Static Resources
     295
     296Without additional configuration, Trac will handle requests for static resources such as stylesheets and images. For anything other than a TracStandalone deployment, this is not optimal as the web server can be set up to directly serve the static resources. For CGI setup, this is '''highly undesirable''' as it causes abysmal performance.
     297
     298Web servers such as [http://httpd.apache.org/ Apache] allow you to create //Aliases// to resources, giving them a virtual URL that doesn't necessarily reflect their location on the file system. We can map requests for static resources directly to directories on the file system, to avoid Trac processing the requests.
     299
     300There are two primary URL paths for static resources: `/chrome/common` and `/chrome/site`. Plugins can add their own resources, usually accessible at the `/chrome/<plugin>` path.
     301
     302A single `/chrome` alias can used if the static resources are extracted for all plugins. This means that the `deploy` command (discussed in the previous section) must be executed after installing or updating a plugin that provides static resources, or after modifying resources in the `$env/htdocs` directory. This is probably appropriate for most installations but may not be what you want if, for example, you wish to upload plugins through the //Plugins// administration page.
     303
     304The `deploy` command creates an `htdocs` directory with:
     305 - `common/` - the static resources of Trac
     306 - `site/` - a copy of the environment's `htdocs/` directory
     307 - `shared` - the static resources shared by multiple Trac environments, with a location defined by the `[inherit]` `htdocs_dir` option
     308 - `<plugin>/` - one directory for each resource directory provided by the plugins enabled for this environment
     309
     310The example that follows will create a single `/chrome` alias. If that isn't the correct approach for your installation you simply need to create more specific aliases:
     311{{{#!apache
     312Alias /trac/chrome/common /path/to/trac/htdocs/common
     313Alias /trac/chrome/site /path/to/trac/htdocs/site
     314Alias /trac/chrome/shared /path/to/trac/htdocs/shared
     315Alias /trac/chrome/<plugin> /path/to/trac/htdocs/<plugin>
     316}}}
     317
     318===== Example: Apache and `ScriptAlias` #ScriptAlias-example
     319
     320Assuming the deployment has been done this way:
     321{{{#!sh
     322$ trac-admin /var/trac/<project> deploy /var/www
     323}}}
     324
     325Add the following snippet to Apache configuration, changing paths to match your deployment. The snippet must be placed ''before'' the `ScriptAlias` or `WSGIScriptAlias` directive, because those directives map all requests to the Trac application:
     326{{{#!apache
     327Alias /trac/chrome /path/to/trac/htdocs
     328
     329<Directory "/path/to/www/trac/htdocs">
     330  # For Apache 2.2
     331  <IfModule !mod_authz_core.c>
     332    Order allow,deny
     333    Allow from all
     334  </IfModule>
     335  # For Apache 2.4
     336  <IfModule mod_authz_core.c>
     337    Require all granted
     338  </IfModule>
     339</Directory>
     340}}}
     341
     342If using mod_python, add this too, otherwise the alias will be ignored:
     343{{{#!apache
     344<Location "/trac/chrome/common">
     345  SetHandler None
     346</Location>
     347}}}
     348
     349Alternatively, if you wish to serve static resources directly from your project's `htdocs` directory rather than the location to which the files are extracted with the `deploy` command, you can configure Apache to serve those resources. Again, put this ''before'' the `ScriptAlias` or `WSGIScriptAlias` for the .*cgi scripts, and adjust names and locations to match your installation:
     350{{{#!apache
     351Alias /trac/chrome/site /path/to/projectenv/htdocs
     352
     353<Directory "/path/to/projectenv/htdocs">
     354  # For Apache 2.2
     355  <IfModule !mod_authz_core.c>
     356    Order allow,deny
     357    Allow from all
     358  </IfModule>
     359  # For Apache 2.4
     360  <IfModule mod_authz_core.c>
     361    Require all granted
     362  </IfModule>
     363</Directory>
     364}}}
     365
     366Another alternative to aliasing `/trac/chrome/common` is having Trac generate direct links for those static resources (and only those), using the [TracIni#trac-section htdocs_location] configuration setting:
     367{{{#!ini
     368[trac]
     369htdocs_location = http://static.example.org/trac-common/
     370}}}
     371
     372Note that this makes it easy to have a dedicated domain serve those static resources, preferentially cookie-less.
     373
     374Of course, you still need to make the Trac `htdocs/common` directory available through the web server at the specified URL, for example by copying (or linking) the directory into the document root of the web server:
     375{{{#!sh
     376$ ln -s /path/to/trac/htdocs/common /var/www/static.example.org/trac-common
     377}}}
     378
     379==== Setting up the Plugin Cache #egg-cache
     380
     381Some Python plugins need to be extracted to a cache directory. By default the cache resides in the home directory of the current user. When running Trac on a Web Server as a dedicated user (which is highly recommended) who has no home directory, this might prevent the plugins from starting. To override the cache location you can set the `PYTHON_EGG_CACHE` environment variable. Refer to your server documentation for detailed instructions on how to set environment variables.
     382
     383If you setup hook scripts that call Trac, such as the Subversion post-commit hook script provided in the `/contrib` directory, make sure you define the `PYTHON_EGG_CACHE` environment variable within these scripts as well.
     384
     385== Configuring Authentication
     386
     387Trac uses HTTP authentication. You'll need to configure your webserver to request authentication when the `.../login` URL is hit (the virtual path of the "login" button). Trac will automatically pick the `REMOTE_USER` variable up after you provide your credentials. Therefore, all user management goes through your web server configuration. Please consult the documentation of your web server for more info.
     388
     389The process of adding, removing, and configuring user accounts for authentication depends on the specific way you run Trac.
     390
     391Please refer to one of the following sections:
     392 * TracStandalone#UsingAuthentication if you use the standalone server, `tracd`.
     393 * [wiki:TracModWSGI#ConfiguringAuthentication TracModWSGI#ConfiguringAuthentication] if you use the Apache web server, with any of its front end: `mod_wsgi`, `mod_python`, `mod_fcgi` or `mod_fastcgi`.
     394 * TracFastCgi if you're using another web server with FCGI support (Cherokee, Lighttpd, !LiteSpeed, nginx)
     395
     396[trac:TracAuthenticationIntroduction] also contains some useful information for beginners.
     397
     398== Granting admin rights to the admin user
     399Grant admin rights to user admin:
     400{{{#!sh
     401$ trac-admin /path/to/myproject permission add admin TRAC_ADMIN
     402}}}
     403
     404This user will have an //Admin// navigation item that directs to pages for administering your Trac project.
     405
     406== Configuring Trac
     407
     408TracRepositoryAdmin provides information on configuring version control repositories for your project.
     409
     410== Using Trac
    308411
    309412Once you have your Trac site up and running, you should be able to create tickets, view the timeline, browse your version control repository if configured, etc.
    310413
    311 Keep in mind that anonymous (not logged in) users can by default access most but not all of the features. You will need to configure authentication and grant additional [wiki:TracPermissions permissions] to authenticated users to see the full set of features.
     414Keep in mind that //anonymous// (not logged in) users can by default access only a few of the features, in particular they will have a read-only access to the resources. You will need to configure authentication and grant additional [TracPermissions permissions] to authenticated users to see the full set of features.
    312415
    313416'' Enjoy! ''
     
    316419
    317420----
    318 See also: [trac:TracInstallPlatforms TracInstallPlatforms], TracGuide, TracCgi, TracFastCgi, TracModPython, [wiki:TracModWSGI], TracUpgrade, TracPermissions
     421See also: [trac:TracInstallPlatforms TracInstallPlatforms], TracGuide, TracUpgrade, TracPermissions