Index: patches/tar-1.26-man-1.patch
===================================================================
--- patches/tar-1.26-man-1.patch	(revision 11651c6ac7325d22e8479849bdaecf3e2508cbe4)
+++ 	(revision )
@@ -1,2073 +1,0 @@
-Submitted By: Jonathan Norman <jonathan at bluesquarelinux.co.uk >
-Date: 2011-05-18
-Initial Package Version: 1.22
-Origin: Debian
-Upstream Status: Unknown
-Description: This patch adds a man page for tar generated by the perl script
-             from debian.
-
-Rediffed: Against 1.26 by Jonathan Norman 2011-05-18
-
-diff -Naur tar-1.26.orig/doc/Makefile.am tar-1.26/doc/Makefile.am
---- tar-1.26.orig/doc/Makefile.am	2011-05-18 17:55:21.025857021 +0000
-+++ tar-1.26/doc/Makefile.am	2011-05-18 17:55:36.872098438 +0000
-@@ -17,6 +17,7 @@
- ## along with this program; if not, write to the Free Software Foundation,
- ## Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
- 
-+man_MANS = tar.1
- info_TEXINFOS = tar.texi
- tar_TEXINFOS = \
-  dumpdir.texi\
-diff -Naur tar-1.26.orig/doc/Makefile.in tar-1.26/doc/Makefile.in
---- tar-1.26.orig/doc/Makefile.in	2011-05-18 17:55:21.029856577 +0000
-+++ tar-1.26/doc/Makefile.in	2011-05-18 17:55:36.872098438 +0000
-@@ -172,7 +172,7 @@
- MAKEINFOHTML = $(MAKEINFO) --html
- AM_MAKEINFOHTMLFLAGS = $(AM_MAKEINFOFLAGS)
- DVIPS = dvips
--am__installdirs = "$(DESTDIR)$(infodir)"
-+am__installdirs = "$(DESTDIR)$(infodir)" "$(DESTDIR)$(man1dir)"
- am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
- am__vpath_adj = case $$p in \
-     $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
-@@ -194,6 +194,9 @@
- am__base_list = \
-   sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
-   sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
-+man1dir = $(mandir)/man1
-+NROFF = nroff
-+MANS = $(man_MANS)
- DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
- pkglibexecdir = @pkglibexecdir@
- ACLOCAL = @ACLOCAL@
-@@ -956,6 +959,7 @@
- top_build_prefix = @top_build_prefix@
- top_builddir = @top_builddir@
- top_srcdir = @top_srcdir@
-+man_MANS = tar.1
- info_TEXINFOS = tar.texi
- tar_TEXINFOS = \
-  dumpdir.texi\
-@@ -1178,6 +1182,44 @@
- 	  echo " rm -f $$i $$i-[0-9] $$i-[0-9][0-9] $$i_i[0-9] $$i_i[0-9][0-9]"; \
- 	  rm -f $$i $$i-[0-9] $$i-[0-9][0-9] $$i_i[0-9] $$i_i[0-9][0-9]; \
- 	done
-+install-man1: $(man_MANS)
-+	@$(NORMAL_INSTALL)
-+	test -z "$(man1dir)" || $(MKDIR_P) "$(DESTDIR)$(man1dir)"
-+	@list=''; test -n "$(man1dir)" || exit 0; \
-+	{ for i in $$list; do echo "$$i"; done; \
-+	l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \
-+	  sed -n '/\.1[a-z]*$$/p'; \
-+	} | while read p; do \
-+	  if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
-+	  echo "$$d$$p"; echo "$$p"; \
-+	done | \
-+	sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
-+	      -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
-+	sed 'N;N;s,\n, ,g' | { \
-+	list=; while read file base inst; do \
-+	  if test "$$base" = "$$inst"; then list="$$list $$file"; else \
-+	    echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man1dir)/$$inst'"; \
-+	    $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man1dir)/$$inst" || exit $$?; \
-+	  fi; \
-+	done; \
-+	for i in $$list; do echo "$$i"; done | $(am__base_list) | \
-+	while read files; do \
-+	  test -z "$$files" || { \
-+	    echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man1dir)'"; \
-+	    $(INSTALL_DATA) $$files "$(DESTDIR)$(man1dir)" || exit $$?; }; \
-+	done; }
-+
-+uninstall-man1:
-+	@$(NORMAL_UNINSTALL)
-+	@list=''; test -n "$(man1dir)" || exit 0; \
-+	files=`{ for i in $$list; do echo "$$i"; done; \
-+	l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \
-+	  sed -n '/\.1[a-z]*$$/p'; \
-+	} | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
-+	      -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
-+	test -z "$$files" || { \
-+	  echo " ( cd '$(DESTDIR)$(man1dir)' && rm -f" $$files ")"; \
-+	  cd "$(DESTDIR)$(man1dir)" && rm -f $$files; }
- tags: TAGS
- TAGS:
- 
-@@ -1186,6 +1228,19 @@
- 
- 
- distdir: $(DISTFILES)
-+	@list='$(MANS)'; if test -n "$$list"; then \
-+	  list=`for p in $$list; do \
-+	    if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
-+	    if test -f "$$d$$p"; then echo "$$d$$p"; else :; fi; done`; \
-+	  if test -n "$$list" && \
-+	    grep 'ab help2man is required to generate this page' $$list >/dev/null; then \
-+	    echo "error: found man pages containing the \`missing help2man' replacement text:" >&2; \
-+	    grep -l 'ab help2man is required to generate this page' $$list | sed 's/^/         /' >&2; \
-+	    echo "       to fix them, install help2man, remove and regenerate the man pages;" >&2; \
-+	    echo "       typically \`make maintainer-clean' will remove them" >&2; \
-+	    exit 1; \
-+	  else :; fi; \
-+	else :; fi
- 	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- 	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- 	list='$(DISTFILES)'; \
-@@ -1220,9 +1275,9 @@
- 	  dist-info
- check-am: all-am
- check: check-am
--all-am: Makefile $(INFO_DEPS)
-+all-am: Makefile $(INFO_DEPS) $(MANS)
- installdirs:
--	for dir in "$(DESTDIR)$(infodir)"; do \
-+	for dir in "$(DESTDIR)$(infodir)" "$(DESTDIR)$(man1dir)"; do \
- 	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
- 	done
- install: install-am
-@@ -1270,7 +1325,7 @@
- 
- info-am: $(INFO_DEPS)
- 
--install-data-am: install-info-am
-+install-data-am: install-info-am install-man
- 
- install-dvi: install-dvi-am
- 
-@@ -1344,7 +1399,7 @@
- 	    install-info --info-dir="$(DESTDIR)$(infodir)" "$(DESTDIR)$(infodir)/$$relfile" || :;\
- 	  done; \
- 	else : ; fi
--install-man:
-+install-man: install-man1
- 
- install-pdf: install-pdf-am
- 
-@@ -1392,7 +1447,9 @@
- ps-am: $(PSS)
- 
- uninstall-am: uninstall-dvi-am uninstall-html-am uninstall-info-am \
--	uninstall-pdf-am uninstall-ps-am
-+	uninstall-man uninstall-pdf-am uninstall-ps-am
-+
-+uninstall-man: uninstall-man1
- 
- .MAKE: install-am install-strip
- 
-@@ -1401,14 +1458,15 @@
- 	dvi-am html html-am info info-am install install-am \
- 	install-data install-data-am install-dvi install-dvi-am \
- 	install-exec install-exec-am install-html install-html-am \
--	install-info install-info-am install-man install-pdf \
--	install-pdf-am install-ps install-ps-am install-strip \
--	installcheck installcheck-am installdirs maintainer-clean \
--	maintainer-clean-aminfo maintainer-clean-generic \
--	maintainer-clean-vti mostlyclean mostlyclean-aminfo \
--	mostlyclean-generic mostlyclean-vti pdf pdf-am ps ps-am \
--	uninstall uninstall-am uninstall-dvi-am uninstall-html-am \
--	uninstall-info-am uninstall-pdf-am uninstall-ps-am
-+	install-info install-info-am install-man install-man1 \
-+	install-pdf install-pdf-am install-ps install-ps-am \
-+	install-strip installcheck installcheck-am installdirs \
-+	maintainer-clean maintainer-clean-aminfo \
-+	maintainer-clean-generic maintainer-clean-vti mostlyclean \
-+	mostlyclean-aminfo mostlyclean-generic mostlyclean-vti pdf \
-+	pdf-am ps ps-am uninstall uninstall-am uninstall-dvi-am \
-+	uninstall-html-am uninstall-info-am uninstall-man \
-+	uninstall-man1 uninstall-pdf-am uninstall-ps-am
- 
- 
- header.texi: $(top_srcdir)/src/tar.h
-diff -Naur tar-1.26.orig/doc/Makefile.in.orig tar-1.26/doc/Makefile.in.orig
---- tar-1.26.orig/doc/Makefile.in.orig	1970-01-01 00:00:00.000000000 +0000
-+++ tar-1.26/doc/Makefile.in.orig	2011-03-12 09:50:09.000000000 +0000
-@@ -0,0 +1,1518 @@
-+# Makefile.in generated by automake 1.11.1 from Makefile.am.
-+# @configure_input@
-+
-+# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-+# 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
-+# Inc.
-+# This Makefile.in is free software; the Free Software Foundation
-+# gives unlimited permission to copy and/or distribute it,
-+# with or without modifications, as long as this notice is preserved.
-+
-+# This program is distributed in the hope that it will be useful,
-+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-+# PARTICULAR PURPOSE.
-+
-+@SET_MAKE@
-+
-+# Makefile for GNU tar documentation.
-+
-+# Copyright (C) 1994, 1995, 1996, 1997, 1999, 2000, 2001, 2003, 2006,
-+# 2007 Free Software Foundation, Inc.
-+VPATH = @srcdir@
-+pkgdatadir = $(datadir)/@PACKAGE@
-+pkgincludedir = $(includedir)/@PACKAGE@
-+pkglibdir = $(libdir)/@PACKAGE@
-+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-+install_sh_DATA = $(install_sh) -c -m 644
-+install_sh_PROGRAM = $(install_sh) -c
-+install_sh_SCRIPT = $(install_sh) -c
-+INSTALL_HEADER = $(INSTALL_DATA)
-+transform = $(program_transform_name)
-+NORMAL_INSTALL = :
-+PRE_INSTALL = :
-+POST_INSTALL = :
-+NORMAL_UNINSTALL = :
-+PRE_UNINSTALL = :
-+POST_UNINSTALL = :
-+build_triplet = @build@
-+host_triplet = @host@
-+subdir = doc
-+DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in \
-+	$(srcdir)/stamp-vti $(srcdir)/version.texi $(tar_TEXINFOS)
-+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-+am__aclocal_m4_deps = $(top_srcdir)/m4/00gnulib.m4 \
-+	$(top_srcdir)/m4/alloca.m4 $(top_srcdir)/m4/argmatch.m4 \
-+	$(top_srcdir)/m4/argp.m4 $(top_srcdir)/m4/backupfile.m4 \
-+	$(top_srcdir)/m4/bison.m4 $(top_srcdir)/m4/btowc.m4 \
-+	$(top_srcdir)/m4/canonicalize.m4 \
-+	$(top_srcdir)/m4/chdir-long.m4 $(top_srcdir)/m4/chown.m4 \
-+	$(top_srcdir)/m4/clock_time.m4 $(top_srcdir)/m4/cloexec.m4 \
-+	$(top_srcdir)/m4/close-stream.m4 $(top_srcdir)/m4/close.m4 \
-+	$(top_srcdir)/m4/closeout.m4 $(top_srcdir)/m4/codeset.m4 \
-+	$(top_srcdir)/m4/configmake.m4 $(top_srcdir)/m4/d-ino.m4 \
-+	$(top_srcdir)/m4/dirent-safer.m4 $(top_srcdir)/m4/dirent_h.m4 \
-+	$(top_srcdir)/m4/dirfd.m4 $(top_srcdir)/m4/dirname.m4 \
-+	$(top_srcdir)/m4/double-slash-root.m4 $(top_srcdir)/m4/dup2.m4 \
-+	$(top_srcdir)/m4/eealloc.m4 $(top_srcdir)/m4/environ.m4 \
-+	$(top_srcdir)/m4/errno_h.m4 $(top_srcdir)/m4/error.m4 \
-+	$(top_srcdir)/m4/exclude.m4 $(top_srcdir)/m4/extensions.m4 \
-+	$(top_srcdir)/m4/fchdir.m4 $(top_srcdir)/m4/fclose.m4 \
-+	$(top_srcdir)/m4/fcntl-o.m4 $(top_srcdir)/m4/fcntl.m4 \
-+	$(top_srcdir)/m4/fcntl_h.m4 $(top_srcdir)/m4/fdopendir.m4 \
-+	$(top_srcdir)/m4/fileblocks.m4 $(top_srcdir)/m4/filenamecat.m4 \
-+	$(top_srcdir)/m4/float_h.m4 $(top_srcdir)/m4/fnmatch.m4 \
-+	$(top_srcdir)/m4/fpending.m4 $(top_srcdir)/m4/fseeko.m4 \
-+	$(top_srcdir)/m4/futimens.m4 \
-+	$(top_srcdir)/m4/getcwd-abort-bug.m4 \
-+	$(top_srcdir)/m4/getcwd-path-max.m4 $(top_srcdir)/m4/getcwd.m4 \
-+	$(top_srcdir)/m4/getdelim.m4 $(top_srcdir)/m4/getdtablesize.m4 \
-+	$(top_srcdir)/m4/getline.m4 $(top_srcdir)/m4/getopt.m4 \
-+	$(top_srcdir)/m4/getpagesize.m4 $(top_srcdir)/m4/gettext.m4 \
-+	$(top_srcdir)/m4/gettime.m4 $(top_srcdir)/m4/gettimeofday.m4 \
-+	$(top_srcdir)/m4/glibc21.m4 $(top_srcdir)/m4/gnulib-common.m4 \
-+	$(top_srcdir)/m4/gnulib-comp.m4 $(top_srcdir)/m4/hash.m4 \
-+	$(top_srcdir)/m4/human.m4 $(top_srcdir)/m4/iconv.m4 \
-+	$(top_srcdir)/m4/include_next.m4 $(top_srcdir)/m4/inline.m4 \
-+	$(top_srcdir)/m4/intlmacosx.m4 $(top_srcdir)/m4/intmax_t.m4 \
-+	$(top_srcdir)/m4/inttostr.m4 $(top_srcdir)/m4/inttypes-pri.m4 \
-+	$(top_srcdir)/m4/inttypes.m4 $(top_srcdir)/m4/inttypes_h.m4 \
-+	$(top_srcdir)/m4/iswblank.m4 $(top_srcdir)/m4/langinfo_h.m4 \
-+	$(top_srcdir)/m4/lchown.m4 $(top_srcdir)/m4/lib-ld.m4 \
-+	$(top_srcdir)/m4/lib-link.m4 $(top_srcdir)/m4/lib-prefix.m4 \
-+	$(top_srcdir)/m4/libunistring-base.m4 \
-+	$(top_srcdir)/m4/link-follow.m4 $(top_srcdir)/m4/link.m4 \
-+	$(top_srcdir)/m4/linkat.m4 $(top_srcdir)/m4/localcharset.m4 \
-+	$(top_srcdir)/m4/locale-fr.m4 $(top_srcdir)/m4/locale-ja.m4 \
-+	$(top_srcdir)/m4/locale-zh.m4 $(top_srcdir)/m4/longlong.m4 \
-+	$(top_srcdir)/m4/lseek.m4 $(top_srcdir)/m4/lstat.m4 \
-+	$(top_srcdir)/m4/malloc.m4 $(top_srcdir)/m4/malloca.m4 \
-+	$(top_srcdir)/m4/mbchar.m4 $(top_srcdir)/m4/mbiter.m4 \
-+	$(top_srcdir)/m4/mbrtowc.m4 $(top_srcdir)/m4/mbsinit.m4 \
-+	$(top_srcdir)/m4/mbsrtowcs.m4 $(top_srcdir)/m4/mbstate_t.m4 \
-+	$(top_srcdir)/m4/mbtowc.m4 $(top_srcdir)/m4/memchr.m4 \
-+	$(top_srcdir)/m4/mempcpy.m4 $(top_srcdir)/m4/memrchr.m4 \
-+	$(top_srcdir)/m4/mkdir.m4 $(top_srcdir)/m4/mkdtemp.m4 \
-+	$(top_srcdir)/m4/mkfifo.m4 $(top_srcdir)/m4/mkfifoat.m4 \
-+	$(top_srcdir)/m4/mknod.m4 $(top_srcdir)/m4/mktime.m4 \
-+	$(top_srcdir)/m4/mmap-anon.m4 $(top_srcdir)/m4/mode_t.m4 \
-+	$(top_srcdir)/m4/modechange.m4 $(top_srcdir)/m4/multiarch.m4 \
-+	$(top_srcdir)/m4/nl_langinfo.m4 $(top_srcdir)/m4/nls.m4 \
-+	$(top_srcdir)/m4/open.m4 $(top_srcdir)/m4/openat.m4 \
-+	$(top_srcdir)/m4/parse-datetime.m4 $(top_srcdir)/m4/pathmax.m4 \
-+	$(top_srcdir)/m4/paxutils.m4 $(top_srcdir)/m4/po.m4 \
-+	$(top_srcdir)/m4/printf.m4 $(top_srcdir)/m4/priv-set.m4 \
-+	$(top_srcdir)/m4/progtest.m4 $(top_srcdir)/m4/quote.m4 \
-+	$(top_srcdir)/m4/quotearg.m4 $(top_srcdir)/m4/rawmemchr.m4 \
-+	$(top_srcdir)/m4/readlink.m4 $(top_srcdir)/m4/readlinkat.m4 \
-+	$(top_srcdir)/m4/realloc.m4 $(top_srcdir)/m4/regex.m4 \
-+	$(top_srcdir)/m4/rename.m4 $(top_srcdir)/m4/renameat.m4 \
-+	$(top_srcdir)/m4/rmdir.m4 $(top_srcdir)/m4/rmt.m4 \
-+	$(top_srcdir)/m4/rpmatch.m4 $(top_srcdir)/m4/rtapelib.m4 \
-+	$(top_srcdir)/m4/safe-read.m4 $(top_srcdir)/m4/safe-write.m4 \
-+	$(top_srcdir)/m4/save-cwd.m4 $(top_srcdir)/m4/savedir.m4 \
-+	$(top_srcdir)/m4/setenv.m4 $(top_srcdir)/m4/size_max.m4 \
-+	$(top_srcdir)/m4/sleep.m4 $(top_srcdir)/m4/snprintf.m4 \
-+	$(top_srcdir)/m4/ssize_t.m4 $(top_srcdir)/m4/stat-time.m4 \
-+	$(top_srcdir)/m4/stat.m4 $(top_srcdir)/m4/stdarg.m4 \
-+	$(top_srcdir)/m4/stdbool.m4 $(top_srcdir)/m4/stddef_h.m4 \
-+	$(top_srcdir)/m4/stdint.m4 $(top_srcdir)/m4/stdint_h.m4 \
-+	$(top_srcdir)/m4/stdio_h.m4 $(top_srcdir)/m4/stdlib_h.m4 \
-+	$(top_srcdir)/m4/stpcpy.m4 $(top_srcdir)/m4/strcase.m4 \
-+	$(top_srcdir)/m4/strchrnul.m4 $(top_srcdir)/m4/strdup.m4 \
-+	$(top_srcdir)/m4/strerror.m4 $(top_srcdir)/m4/string_h.m4 \
-+	$(top_srcdir)/m4/strings_h.m4 $(top_srcdir)/m4/strndup.m4 \
-+	$(top_srcdir)/m4/strnlen.m4 $(top_srcdir)/m4/strtoimax.m4 \
-+	$(top_srcdir)/m4/strtol.m4 $(top_srcdir)/m4/strtoll.m4 \
-+	$(top_srcdir)/m4/strtoul.m4 $(top_srcdir)/m4/strtoull.m4 \
-+	$(top_srcdir)/m4/strtoumax.m4 $(top_srcdir)/m4/symlink.m4 \
-+	$(top_srcdir)/m4/symlinkat.m4 $(top_srcdir)/m4/sys_stat_h.m4 \
-+	$(top_srcdir)/m4/sys_time_h.m4 $(top_srcdir)/m4/sysexits.m4 \
-+	$(top_srcdir)/m4/system.m4 $(top_srcdir)/m4/tempname.m4 \
-+	$(top_srcdir)/m4/time_h.m4 $(top_srcdir)/m4/time_r.m4 \
-+	$(top_srcdir)/m4/timespec.m4 $(top_srcdir)/m4/tm_gmtoff.m4 \
-+	$(top_srcdir)/m4/unistd-safer.m4 $(top_srcdir)/m4/unistd_h.m4 \
-+	$(top_srcdir)/m4/unlink.m4 $(top_srcdir)/m4/unlinkdir.m4 \
-+	$(top_srcdir)/m4/unlocked-io.m4 $(top_srcdir)/m4/utimbuf.m4 \
-+	$(top_srcdir)/m4/utimens.m4 $(top_srcdir)/m4/utimensat.m4 \
-+	$(top_srcdir)/m4/utimes.m4 $(top_srcdir)/m4/vasnprintf.m4 \
-+	$(top_srcdir)/m4/vasprintf.m4 $(top_srcdir)/m4/version-etc.m4 \
-+	$(top_srcdir)/m4/vsnprintf.m4 $(top_srcdir)/m4/warn-on-use.m4 \
-+	$(top_srcdir)/m4/wchar_h.m4 $(top_srcdir)/m4/wchar_t.m4 \
-+	$(top_srcdir)/m4/wcrtomb.m4 $(top_srcdir)/m4/wctype_h.m4 \
-+	$(top_srcdir)/m4/wcwidth.m4 $(top_srcdir)/m4/wint_t.m4 \
-+	$(top_srcdir)/m4/write.m4 $(top_srcdir)/m4/xalloc.m4 \
-+	$(top_srcdir)/m4/xgetcwd.m4 $(top_srcdir)/m4/xsize.m4 \
-+	$(top_srcdir)/m4/xstrndup.m4 $(top_srcdir)/m4/xstrtol.m4 \
-+	$(top_srcdir)/m4/xvasprintf.m4 $(top_srcdir)/acinclude.m4 \
-+	$(top_srcdir)/configure.ac
-+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
-+	$(ACLOCAL_M4)
-+mkinstalldirs = $(install_sh) -d
-+CONFIG_HEADER = $(top_builddir)/config.h
-+CONFIG_CLEAN_FILES =
-+CONFIG_CLEAN_VPATH_FILES =
-+AM_V_GEN = $(am__v_GEN_$(V))
-+am__v_GEN_ = $(am__v_GEN_$(AM_DEFAULT_VERBOSITY))
-+am__v_GEN_0 = @echo "  GEN   " $@;
-+AM_V_at = $(am__v_at_$(V))
-+am__v_at_ = $(am__v_at_$(AM_DEFAULT_VERBOSITY))
-+am__v_at_0 = @
-+SOURCES =
-+DIST_SOURCES =
-+INFO_DEPS = $(srcdir)/tar.info
-+TEXINFO_TEX = $(top_srcdir)/build-aux/texinfo.tex
-+am__TEXINFO_TEX_DIR = $(top_srcdir)/build-aux
-+DVIS = tar.dvi
-+PDFS = tar.pdf
-+PSS = tar.ps
-+HTMLS = tar.html
-+TEXINFOS = tar.texi
-+TEXI2PDF = $(TEXI2DVI) --pdf --batch
-+MAKEINFOHTML = $(MAKEINFO) --html
-+AM_MAKEINFOHTMLFLAGS = $(AM_MAKEINFOFLAGS)
-+DVIPS = dvips
-+am__installdirs = "$(DESTDIR)$(infodir)"
-+am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
-+am__vpath_adj = case $$p in \
-+    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
-+    *) f=$$p;; \
-+  esac;
-+am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
-+am__install_max = 40
-+am__nobase_strip_setup = \
-+  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
-+am__nobase_strip = \
-+  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
-+am__nobase_list = $(am__nobase_strip_setup); \
-+  for p in $$list; do echo "$$p $$p"; done | \
-+  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
-+  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
-+    if (++n[$$2] == $(am__install_max)) \
-+      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
-+    END { for (dir in files) print dir, files[dir] }'
-+am__base_list = \
-+  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
-+  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
-+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-+pkglibexecdir = @pkglibexecdir@
-+ACLOCAL = @ACLOCAL@
-+ALLOCA = @ALLOCA@
-+ALLOCA_H = @ALLOCA_H@
-+AMTAR = @AMTAR@
-+AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
-+APPLE_UNIVERSAL_BUILD = @APPLE_UNIVERSAL_BUILD@
-+AUTOCONF = @AUTOCONF@
-+AUTOHEADER = @AUTOHEADER@
-+AUTOM4TE = @AUTOM4TE@
-+AUTOMAKE = @AUTOMAKE@
-+AWK = @AWK@
-+BACKUP_LIBEXEC_SCRIPTS = @BACKUP_LIBEXEC_SCRIPTS@
-+BACKUP_SBIN_SCRIPTS = @BACKUP_SBIN_SCRIPTS@
-+BACKUP_SED_COND = @BACKUP_SED_COND@
-+BITSIZEOF_PTRDIFF_T = @BITSIZEOF_PTRDIFF_T@
-+BITSIZEOF_SIG_ATOMIC_T = @BITSIZEOF_SIG_ATOMIC_T@
-+BITSIZEOF_SIZE_T = @BITSIZEOF_SIZE_T@
-+BITSIZEOF_WCHAR_T = @BITSIZEOF_WCHAR_T@
-+BITSIZEOF_WINT_T = @BITSIZEOF_WINT_T@
-+CC = @CC@
-+CCDEPMODE = @CCDEPMODE@
-+CFLAGS = @CFLAGS@
-+CPP = @CPP@
-+CPPFLAGS = @CPPFLAGS@
-+CYGPATH_W = @CYGPATH_W@
-+DEFAULT_ARCHIVE = @DEFAULT_ARCHIVE@
-+DEFAULT_ARCHIVE_FORMAT = @DEFAULT_ARCHIVE_FORMAT@
-+DEFAULT_BLOCKING = @DEFAULT_BLOCKING@
-+DEFAULT_QUOTING_STYLE = @DEFAULT_QUOTING_STYLE@
-+DEFAULT_RMT_COMMAND = @DEFAULT_RMT_COMMAND@
-+DEFAULT_RMT_DIR = @DEFAULT_RMT_DIR@
-+DEFS = @DEFS@
-+DEPDIR = @DEPDIR@
-+ECHO_C = @ECHO_C@
-+ECHO_N = @ECHO_N@
-+ECHO_T = @ECHO_T@
-+EGREP = @EGREP@
-+EMULTIHOP_HIDDEN = @EMULTIHOP_HIDDEN@
-+EMULTIHOP_VALUE = @EMULTIHOP_VALUE@
-+ENOLINK_HIDDEN = @ENOLINK_HIDDEN@
-+ENOLINK_VALUE = @ENOLINK_VALUE@
-+EOVERFLOW_HIDDEN = @EOVERFLOW_HIDDEN@
-+EOVERFLOW_VALUE = @EOVERFLOW_VALUE@
-+ERRNO_H = @ERRNO_H@
-+EXEEXT = @EXEEXT@
-+FLOAT_H = @FLOAT_H@
-+FNMATCH_H = @FNMATCH_H@
-+GETOPT_H = @GETOPT_H@
-+GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@
-+GLIBC21 = @GLIBC21@
-+GMSGFMT = @GMSGFMT@
-+GMSGFMT_015 = @GMSGFMT_015@
-+GNULIB_ALPHASORT = @GNULIB_ALPHASORT@
-+GNULIB_ATOLL = @GNULIB_ATOLL@
-+GNULIB_BTOWC = @GNULIB_BTOWC@
-+GNULIB_CALLOC_POSIX = @GNULIB_CALLOC_POSIX@
-+GNULIB_CANONICALIZE_FILE_NAME = @GNULIB_CANONICALIZE_FILE_NAME@
-+GNULIB_CHOWN = @GNULIB_CHOWN@
-+GNULIB_CLOSE = @GNULIB_CLOSE@
-+GNULIB_DIRFD = @GNULIB_DIRFD@
-+GNULIB_DPRINTF = @GNULIB_DPRINTF@
-+GNULIB_DUP2 = @GNULIB_DUP2@
-+GNULIB_DUP3 = @GNULIB_DUP3@
-+GNULIB_ENVIRON = @GNULIB_ENVIRON@
-+GNULIB_EUIDACCESS = @GNULIB_EUIDACCESS@
-+GNULIB_FACCESSAT = @GNULIB_FACCESSAT@
-+GNULIB_FCHDIR = @GNULIB_FCHDIR@
-+GNULIB_FCHMODAT = @GNULIB_FCHMODAT@
-+GNULIB_FCHOWNAT = @GNULIB_FCHOWNAT@
-+GNULIB_FCLOSE = @GNULIB_FCLOSE@
-+GNULIB_FCNTL = @GNULIB_FCNTL@
-+GNULIB_FDOPENDIR = @GNULIB_FDOPENDIR@
-+GNULIB_FFLUSH = @GNULIB_FFLUSH@
-+GNULIB_FOPEN = @GNULIB_FOPEN@
-+GNULIB_FPRINTF = @GNULIB_FPRINTF@
-+GNULIB_FPRINTF_POSIX = @GNULIB_FPRINTF_POSIX@
-+GNULIB_FPURGE = @GNULIB_FPURGE@
-+GNULIB_FPUTC = @GNULIB_FPUTC@
-+GNULIB_FPUTS = @GNULIB_FPUTS@
-+GNULIB_FREOPEN = @GNULIB_FREOPEN@
-+GNULIB_FSEEK = @GNULIB_FSEEK@
-+GNULIB_FSEEKO = @GNULIB_FSEEKO@
-+GNULIB_FSTATAT = @GNULIB_FSTATAT@
-+GNULIB_FSYNC = @GNULIB_FSYNC@
-+GNULIB_FTELL = @GNULIB_FTELL@
-+GNULIB_FTELLO = @GNULIB_FTELLO@
-+GNULIB_FTRUNCATE = @GNULIB_FTRUNCATE@
-+GNULIB_FUTIMENS = @GNULIB_FUTIMENS@
-+GNULIB_FWRITE = @GNULIB_FWRITE@
-+GNULIB_GETCWD = @GNULIB_GETCWD@
-+GNULIB_GETDELIM = @GNULIB_GETDELIM@
-+GNULIB_GETDOMAINNAME = @GNULIB_GETDOMAINNAME@
-+GNULIB_GETDTABLESIZE = @GNULIB_GETDTABLESIZE@
-+GNULIB_GETGROUPS = @GNULIB_GETGROUPS@
-+GNULIB_GETHOSTNAME = @GNULIB_GETHOSTNAME@
-+GNULIB_GETLINE = @GNULIB_GETLINE@
-+GNULIB_GETLOADAVG = @GNULIB_GETLOADAVG@
-+GNULIB_GETLOGIN = @GNULIB_GETLOGIN@
-+GNULIB_GETLOGIN_R = @GNULIB_GETLOGIN_R@
-+GNULIB_GETPAGESIZE = @GNULIB_GETPAGESIZE@
-+GNULIB_GETSUBOPT = @GNULIB_GETSUBOPT@
-+GNULIB_GETTIMEOFDAY = @GNULIB_GETTIMEOFDAY@
-+GNULIB_GETUSERSHELL = @GNULIB_GETUSERSHELL@
-+GNULIB_GRANTPT = @GNULIB_GRANTPT@
-+GNULIB_IMAXABS = @GNULIB_IMAXABS@
-+GNULIB_IMAXDIV = @GNULIB_IMAXDIV@
-+GNULIB_ISWBLANK = @GNULIB_ISWBLANK@
-+GNULIB_ISWCTYPE = @GNULIB_ISWCTYPE@
-+GNULIB_LCHMOD = @GNULIB_LCHMOD@
-+GNULIB_LCHOWN = @GNULIB_LCHOWN@
-+GNULIB_LINK = @GNULIB_LINK@
-+GNULIB_LINKAT = @GNULIB_LINKAT@
-+GNULIB_LSEEK = @GNULIB_LSEEK@
-+GNULIB_LSTAT = @GNULIB_LSTAT@
-+GNULIB_MALLOC_POSIX = @GNULIB_MALLOC_POSIX@
-+GNULIB_MBRLEN = @GNULIB_MBRLEN@
-+GNULIB_MBRTOWC = @GNULIB_MBRTOWC@
-+GNULIB_MBSCASECMP = @GNULIB_MBSCASECMP@
-+GNULIB_MBSCASESTR = @GNULIB_MBSCASESTR@
-+GNULIB_MBSCHR = @GNULIB_MBSCHR@
-+GNULIB_MBSCSPN = @GNULIB_MBSCSPN@
-+GNULIB_MBSINIT = @GNULIB_MBSINIT@
-+GNULIB_MBSLEN = @GNULIB_MBSLEN@
-+GNULIB_MBSNCASECMP = @GNULIB_MBSNCASECMP@
-+GNULIB_MBSNLEN = @GNULIB_MBSNLEN@
-+GNULIB_MBSNRTOWCS = @GNULIB_MBSNRTOWCS@
-+GNULIB_MBSPBRK = @GNULIB_MBSPBRK@
-+GNULIB_MBSPCASECMP = @GNULIB_MBSPCASECMP@
-+GNULIB_MBSRCHR = @GNULIB_MBSRCHR@
-+GNULIB_MBSRTOWCS = @GNULIB_MBSRTOWCS@
-+GNULIB_MBSSEP = @GNULIB_MBSSEP@
-+GNULIB_MBSSPN = @GNULIB_MBSSPN@
-+GNULIB_MBSSTR = @GNULIB_MBSSTR@
-+GNULIB_MBSTOK_R = @GNULIB_MBSTOK_R@
-+GNULIB_MBTOWC = @GNULIB_MBTOWC@
-+GNULIB_MEMCHR = @GNULIB_MEMCHR@
-+GNULIB_MEMMEM = @GNULIB_MEMMEM@
-+GNULIB_MEMPCPY = @GNULIB_MEMPCPY@
-+GNULIB_MEMRCHR = @GNULIB_MEMRCHR@
-+GNULIB_MKDIRAT = @GNULIB_MKDIRAT@
-+GNULIB_MKDTEMP = @GNULIB_MKDTEMP@
-+GNULIB_MKFIFO = @GNULIB_MKFIFO@
-+GNULIB_MKFIFOAT = @GNULIB_MKFIFOAT@
-+GNULIB_MKNOD = @GNULIB_MKNOD@
-+GNULIB_MKNODAT = @GNULIB_MKNODAT@
-+GNULIB_MKOSTEMP = @GNULIB_MKOSTEMP@
-+GNULIB_MKOSTEMPS = @GNULIB_MKOSTEMPS@
-+GNULIB_MKSTEMP = @GNULIB_MKSTEMP@
-+GNULIB_MKSTEMPS = @GNULIB_MKSTEMPS@
-+GNULIB_MKTIME = @GNULIB_MKTIME@
-+GNULIB_NANOSLEEP = @GNULIB_NANOSLEEP@
-+GNULIB_NL_LANGINFO = @GNULIB_NL_LANGINFO@
-+GNULIB_OBSTACK_PRINTF = @GNULIB_OBSTACK_PRINTF@
-+GNULIB_OBSTACK_PRINTF_POSIX = @GNULIB_OBSTACK_PRINTF_POSIX@
-+GNULIB_OPEN = @GNULIB_OPEN@
-+GNULIB_OPENAT = @GNULIB_OPENAT@
-+GNULIB_PERROR = @GNULIB_PERROR@
-+GNULIB_PIPE = @GNULIB_PIPE@
-+GNULIB_PIPE2 = @GNULIB_PIPE2@
-+GNULIB_POPEN = @GNULIB_POPEN@
-+GNULIB_PREAD = @GNULIB_PREAD@
-+GNULIB_PRINTF = @GNULIB_PRINTF@
-+GNULIB_PRINTF_POSIX = @GNULIB_PRINTF_POSIX@
-+GNULIB_PTSNAME = @GNULIB_PTSNAME@
-+GNULIB_PUTC = @GNULIB_PUTC@
-+GNULIB_PUTCHAR = @GNULIB_PUTCHAR@
-+GNULIB_PUTENV = @GNULIB_PUTENV@
-+GNULIB_PUTS = @GNULIB_PUTS@
-+GNULIB_PWRITE = @GNULIB_PWRITE@
-+GNULIB_RANDOM_R = @GNULIB_RANDOM_R@
-+GNULIB_RAWMEMCHR = @GNULIB_RAWMEMCHR@
-+GNULIB_READLINK = @GNULIB_READLINK@
-+GNULIB_READLINKAT = @GNULIB_READLINKAT@
-+GNULIB_REALLOC_POSIX = @GNULIB_REALLOC_POSIX@
-+GNULIB_REALPATH = @GNULIB_REALPATH@
-+GNULIB_REMOVE = @GNULIB_REMOVE@
-+GNULIB_RENAME = @GNULIB_RENAME@
-+GNULIB_RENAMEAT = @GNULIB_RENAMEAT@
-+GNULIB_RMDIR = @GNULIB_RMDIR@
-+GNULIB_RPMATCH = @GNULIB_RPMATCH@
-+GNULIB_SCANDIR = @GNULIB_SCANDIR@
-+GNULIB_SETENV = @GNULIB_SETENV@
-+GNULIB_SLEEP = @GNULIB_SLEEP@
-+GNULIB_SNPRINTF = @GNULIB_SNPRINTF@
-+GNULIB_SPRINTF_POSIX = @GNULIB_SPRINTF_POSIX@
-+GNULIB_STAT = @GNULIB_STAT@
-+GNULIB_STDIO_H_SIGPIPE = @GNULIB_STDIO_H_SIGPIPE@
-+GNULIB_STPCPY = @GNULIB_STPCPY@
-+GNULIB_STPNCPY = @GNULIB_STPNCPY@
-+GNULIB_STRCASESTR = @GNULIB_STRCASESTR@
-+GNULIB_STRCHRNUL = @GNULIB_STRCHRNUL@
-+GNULIB_STRDUP = @GNULIB_STRDUP@
-+GNULIB_STRERROR = @GNULIB_STRERROR@
-+GNULIB_STRERROR_R = @GNULIB_STRERROR_R@
-+GNULIB_STRNCAT = @GNULIB_STRNCAT@
-+GNULIB_STRNDUP = @GNULIB_STRNDUP@
-+GNULIB_STRNLEN = @GNULIB_STRNLEN@
-+GNULIB_STRPBRK = @GNULIB_STRPBRK@
-+GNULIB_STRPTIME = @GNULIB_STRPTIME@
-+GNULIB_STRSEP = @GNULIB_STRSEP@
-+GNULIB_STRSIGNAL = @GNULIB_STRSIGNAL@
-+GNULIB_STRSTR = @GNULIB_STRSTR@
-+GNULIB_STRTOD = @GNULIB_STRTOD@
-+GNULIB_STRTOIMAX = @GNULIB_STRTOIMAX@
-+GNULIB_STRTOK_R = @GNULIB_STRTOK_R@
-+GNULIB_STRTOLL = @GNULIB_STRTOLL@
-+GNULIB_STRTOULL = @GNULIB_STRTOULL@
-+GNULIB_STRTOUMAX = @GNULIB_STRTOUMAX@
-+GNULIB_STRVERSCMP = @GNULIB_STRVERSCMP@
-+GNULIB_SYMLINK = @GNULIB_SYMLINK@
-+GNULIB_SYMLINKAT = @GNULIB_SYMLINKAT@
-+GNULIB_SYSTEM_POSIX = @GNULIB_SYSTEM_POSIX@
-+GNULIB_TIMEGM = @GNULIB_TIMEGM@
-+GNULIB_TIME_R = @GNULIB_TIME_R@
-+GNULIB_TMPFILE = @GNULIB_TMPFILE@
-+GNULIB_TOWCTRANS = @GNULIB_TOWCTRANS@
-+GNULIB_TTYNAME_R = @GNULIB_TTYNAME_R@
-+GNULIB_UNISTD_H_GETOPT = @GNULIB_UNISTD_H_GETOPT@
-+GNULIB_UNISTD_H_SIGPIPE = @GNULIB_UNISTD_H_SIGPIPE@
-+GNULIB_UNLINK = @GNULIB_UNLINK@
-+GNULIB_UNLINKAT = @GNULIB_UNLINKAT@
-+GNULIB_UNLOCKPT = @GNULIB_UNLOCKPT@
-+GNULIB_UNSETENV = @GNULIB_UNSETENV@
-+GNULIB_USLEEP = @GNULIB_USLEEP@
-+GNULIB_UTIMENSAT = @GNULIB_UTIMENSAT@
-+GNULIB_VASPRINTF = @GNULIB_VASPRINTF@
-+GNULIB_VDPRINTF = @GNULIB_VDPRINTF@
-+GNULIB_VFPRINTF = @GNULIB_VFPRINTF@
-+GNULIB_VFPRINTF_POSIX = @GNULIB_VFPRINTF_POSIX@
-+GNULIB_VPRINTF = @GNULIB_VPRINTF@
-+GNULIB_VPRINTF_POSIX = @GNULIB_VPRINTF_POSIX@
-+GNULIB_VSNPRINTF = @GNULIB_VSNPRINTF@
-+GNULIB_VSPRINTF_POSIX = @GNULIB_VSPRINTF_POSIX@
-+GNULIB_WCPCPY = @GNULIB_WCPCPY@
-+GNULIB_WCPNCPY = @GNULIB_WCPNCPY@
-+GNULIB_WCRTOMB = @GNULIB_WCRTOMB@
-+GNULIB_WCSCASECMP = @GNULIB_WCSCASECMP@
-+GNULIB_WCSCAT = @GNULIB_WCSCAT@
-+GNULIB_WCSCHR = @GNULIB_WCSCHR@
-+GNULIB_WCSCMP = @GNULIB_WCSCMP@
-+GNULIB_WCSCOLL = @GNULIB_WCSCOLL@
-+GNULIB_WCSCPY = @GNULIB_WCSCPY@
-+GNULIB_WCSCSPN = @GNULIB_WCSCSPN@
-+GNULIB_WCSDUP = @GNULIB_WCSDUP@
-+GNULIB_WCSLEN = @GNULIB_WCSLEN@
-+GNULIB_WCSNCASECMP = @GNULIB_WCSNCASECMP@
-+GNULIB_WCSNCAT = @GNULIB_WCSNCAT@
-+GNULIB_WCSNCMP = @GNULIB_WCSNCMP@
-+GNULIB_WCSNCPY = @GNULIB_WCSNCPY@
-+GNULIB_WCSNLEN = @GNULIB_WCSNLEN@
-+GNULIB_WCSNRTOMBS = @GNULIB_WCSNRTOMBS@
-+GNULIB_WCSPBRK = @GNULIB_WCSPBRK@
-+GNULIB_WCSRCHR = @GNULIB_WCSRCHR@
-+GNULIB_WCSRTOMBS = @GNULIB_WCSRTOMBS@
-+GNULIB_WCSSPN = @GNULIB_WCSSPN@
-+GNULIB_WCSSTR = @GNULIB_WCSSTR@
-+GNULIB_WCSTOK = @GNULIB_WCSTOK@
-+GNULIB_WCSWIDTH = @GNULIB_WCSWIDTH@
-+GNULIB_WCSXFRM = @GNULIB_WCSXFRM@
-+GNULIB_WCTOB = @GNULIB_WCTOB@
-+GNULIB_WCTOMB = @GNULIB_WCTOMB@
-+GNULIB_WCTRANS = @GNULIB_WCTRANS@
-+GNULIB_WCTYPE = @GNULIB_WCTYPE@
-+GNULIB_WCWIDTH = @GNULIB_WCWIDTH@
-+GNULIB_WMEMCHR = @GNULIB_WMEMCHR@
-+GNULIB_WMEMCMP = @GNULIB_WMEMCMP@
-+GNULIB_WMEMCPY = @GNULIB_WMEMCPY@
-+GNULIB_WMEMMOVE = @GNULIB_WMEMMOVE@
-+GNULIB_WMEMSET = @GNULIB_WMEMSET@
-+GNULIB_WRITE = @GNULIB_WRITE@
-+GNULIB__EXIT = @GNULIB__EXIT@
-+GREP = @GREP@
-+HAVE_ALPHASORT = @HAVE_ALPHASORT@
-+HAVE_ATOLL = @HAVE_ATOLL@
-+HAVE_BTOWC = @HAVE_BTOWC@
-+HAVE_CANONICALIZE_FILE_NAME = @HAVE_CANONICALIZE_FILE_NAME@
-+HAVE_CHOWN = @HAVE_CHOWN@
-+HAVE_DECL_DIRFD = @HAVE_DECL_DIRFD@
-+HAVE_DECL_ENVIRON = @HAVE_DECL_ENVIRON@
-+HAVE_DECL_FCHDIR = @HAVE_DECL_FCHDIR@
-+HAVE_DECL_FDOPENDIR = @HAVE_DECL_FDOPENDIR@
-+HAVE_DECL_FPURGE = @HAVE_DECL_FPURGE@
-+HAVE_DECL_FSEEKO = @HAVE_DECL_FSEEKO@
-+HAVE_DECL_FTELLO = @HAVE_DECL_FTELLO@
-+HAVE_DECL_GETDELIM = @HAVE_DECL_GETDELIM@
-+HAVE_DECL_GETDOMAINNAME = @HAVE_DECL_GETDOMAINNAME@
-+HAVE_DECL_GETLINE = @HAVE_DECL_GETLINE@
-+HAVE_DECL_GETLOADAVG = @HAVE_DECL_GETLOADAVG@
-+HAVE_DECL_GETLOGIN_R = @HAVE_DECL_GETLOGIN_R@
-+HAVE_DECL_GETPAGESIZE = @HAVE_DECL_GETPAGESIZE@
-+HAVE_DECL_GETUSERSHELL = @HAVE_DECL_GETUSERSHELL@
-+HAVE_DECL_IMAXABS = @HAVE_DECL_IMAXABS@
-+HAVE_DECL_IMAXDIV = @HAVE_DECL_IMAXDIV@
-+HAVE_DECL_LOCALTIME_R = @HAVE_DECL_LOCALTIME_R@
-+HAVE_DECL_MEMMEM = @HAVE_DECL_MEMMEM@
-+HAVE_DECL_MEMRCHR = @HAVE_DECL_MEMRCHR@
-+HAVE_DECL_OBSTACK_PRINTF = @HAVE_DECL_OBSTACK_PRINTF@
-+HAVE_DECL_SETENV = @HAVE_DECL_SETENV@
-+HAVE_DECL_SNPRINTF = @HAVE_DECL_SNPRINTF@
-+HAVE_DECL_STRDUP = @HAVE_DECL_STRDUP@
-+HAVE_DECL_STRERROR_R = @HAVE_DECL_STRERROR_R@
-+HAVE_DECL_STRNCASECMP = @HAVE_DECL_STRNCASECMP@
-+HAVE_DECL_STRNDUP = @HAVE_DECL_STRNDUP@
-+HAVE_DECL_STRNLEN = @HAVE_DECL_STRNLEN@
-+HAVE_DECL_STRSIGNAL = @HAVE_DECL_STRSIGNAL@
-+HAVE_DECL_STRTOIMAX = @HAVE_DECL_STRTOIMAX@
-+HAVE_DECL_STRTOK_R = @HAVE_DECL_STRTOK_R@
-+HAVE_DECL_STRTOUMAX = @HAVE_DECL_STRTOUMAX@
-+HAVE_DECL_TTYNAME_R = @HAVE_DECL_TTYNAME_R@
-+HAVE_DECL_UNSETENV = @HAVE_DECL_UNSETENV@
-+HAVE_DECL_VSNPRINTF = @HAVE_DECL_VSNPRINTF@
-+HAVE_DECL_WCTOB = @HAVE_DECL_WCTOB@
-+HAVE_DECL_WCWIDTH = @HAVE_DECL_WCWIDTH@
-+HAVE_DPRINTF = @HAVE_DPRINTF@
-+HAVE_DUP2 = @HAVE_DUP2@
-+HAVE_DUP3 = @HAVE_DUP3@
-+HAVE_EUIDACCESS = @HAVE_EUIDACCESS@
-+HAVE_FACCESSAT = @HAVE_FACCESSAT@
-+HAVE_FCHDIR = @HAVE_FCHDIR@
-+HAVE_FCHMODAT = @HAVE_FCHMODAT@
-+HAVE_FCHOWNAT = @HAVE_FCHOWNAT@
-+HAVE_FCNTL = @HAVE_FCNTL@
-+HAVE_FDOPENDIR = @HAVE_FDOPENDIR@
-+HAVE_FEATURES_H = @HAVE_FEATURES_H@
-+HAVE_FSEEKO = @HAVE_FSEEKO@
-+HAVE_FSTATAT = @HAVE_FSTATAT@
-+HAVE_FSYNC = @HAVE_FSYNC@
-+HAVE_FTELLO = @HAVE_FTELLO@
-+HAVE_FTRUNCATE = @HAVE_FTRUNCATE@
-+HAVE_FUTIMENS = @HAVE_FUTIMENS@
-+HAVE_GETDTABLESIZE = @HAVE_GETDTABLESIZE@
-+HAVE_GETGROUPS = @HAVE_GETGROUPS@
-+HAVE_GETHOSTNAME = @HAVE_GETHOSTNAME@
-+HAVE_GETLOGIN = @HAVE_GETLOGIN@
-+HAVE_GETOPT_H = @HAVE_GETOPT_H@
-+HAVE_GETPAGESIZE = @HAVE_GETPAGESIZE@
-+HAVE_GETSUBOPT = @HAVE_GETSUBOPT@
-+HAVE_GETTIMEOFDAY = @HAVE_GETTIMEOFDAY@
-+HAVE_GRANTPT = @HAVE_GRANTPT@
-+HAVE_INTTYPES_H = @HAVE_INTTYPES_H@
-+HAVE_ISWBLANK = @HAVE_ISWBLANK@
-+HAVE_ISWCNTRL = @HAVE_ISWCNTRL@
-+HAVE_LANGINFO_CODESET = @HAVE_LANGINFO_CODESET@
-+HAVE_LANGINFO_ERA = @HAVE_LANGINFO_ERA@
-+HAVE_LANGINFO_H = @HAVE_LANGINFO_H@
-+HAVE_LANGINFO_T_FMT_AMPM = @HAVE_LANGINFO_T_FMT_AMPM@
-+HAVE_LANGINFO_YESEXPR = @HAVE_LANGINFO_YESEXPR@
-+HAVE_LCHMOD = @HAVE_LCHMOD@
-+HAVE_LCHOWN = @HAVE_LCHOWN@
-+HAVE_LINK = @HAVE_LINK@
-+HAVE_LINKAT = @HAVE_LINKAT@
-+HAVE_LONG_LONG_INT = @HAVE_LONG_LONG_INT@
-+HAVE_LSTAT = @HAVE_LSTAT@
-+HAVE_MBRLEN = @HAVE_MBRLEN@
-+HAVE_MBRTOWC = @HAVE_MBRTOWC@
-+HAVE_MBSINIT = @HAVE_MBSINIT@
-+HAVE_MBSLEN = @HAVE_MBSLEN@
-+HAVE_MBSNRTOWCS = @HAVE_MBSNRTOWCS@
-+HAVE_MBSRTOWCS = @HAVE_MBSRTOWCS@
-+HAVE_MEMCHR = @HAVE_MEMCHR@
-+HAVE_MEMPCPY = @HAVE_MEMPCPY@
-+HAVE_MKDIRAT = @HAVE_MKDIRAT@
-+HAVE_MKDTEMP = @HAVE_MKDTEMP@
-+HAVE_MKFIFO = @HAVE_MKFIFO@
-+HAVE_MKFIFOAT = @HAVE_MKFIFOAT@
-+HAVE_MKNOD = @HAVE_MKNOD@
-+HAVE_MKNODAT = @HAVE_MKNODAT@
-+HAVE_MKOSTEMP = @HAVE_MKOSTEMP@
-+HAVE_MKOSTEMPS = @HAVE_MKOSTEMPS@
-+HAVE_MKSTEMP = @HAVE_MKSTEMP@
-+HAVE_MKSTEMPS = @HAVE_MKSTEMPS@
-+HAVE_NANOSLEEP = @HAVE_NANOSLEEP@
-+HAVE_NL_LANGINFO = @HAVE_NL_LANGINFO@
-+HAVE_OPENAT = @HAVE_OPENAT@
-+HAVE_OS_H = @HAVE_OS_H@
-+HAVE_PIPE = @HAVE_PIPE@
-+HAVE_PIPE2 = @HAVE_PIPE2@
-+HAVE_PREAD = @HAVE_PREAD@
-+HAVE_PTSNAME = @HAVE_PTSNAME@
-+HAVE_PWRITE = @HAVE_PWRITE@
-+HAVE_RANDOM_H = @HAVE_RANDOM_H@
-+HAVE_RANDOM_R = @HAVE_RANDOM_R@
-+HAVE_RAWMEMCHR = @HAVE_RAWMEMCHR@
-+HAVE_READLINK = @HAVE_READLINK@
-+HAVE_READLINKAT = @HAVE_READLINKAT@
-+HAVE_REALPATH = @HAVE_REALPATH@
-+HAVE_RENAMEAT = @HAVE_RENAMEAT@
-+HAVE_RPMATCH = @HAVE_RPMATCH@
-+HAVE_SCANDIR = @HAVE_SCANDIR@
-+HAVE_SETENV = @HAVE_SETENV@
-+HAVE_SIGNED_SIG_ATOMIC_T = @HAVE_SIGNED_SIG_ATOMIC_T@
-+HAVE_SIGNED_WCHAR_T = @HAVE_SIGNED_WCHAR_T@
-+HAVE_SIGNED_WINT_T = @HAVE_SIGNED_WINT_T@
-+HAVE_SLEEP = @HAVE_SLEEP@
-+HAVE_STDINT_H = @HAVE_STDINT_H@
-+HAVE_STPCPY = @HAVE_STPCPY@
-+HAVE_STPNCPY = @HAVE_STPNCPY@
-+HAVE_STRCASECMP = @HAVE_STRCASECMP@
-+HAVE_STRCASESTR = @HAVE_STRCASESTR@
-+HAVE_STRCHRNUL = @HAVE_STRCHRNUL@
-+HAVE_STRPBRK = @HAVE_STRPBRK@
-+HAVE_STRPTIME = @HAVE_STRPTIME@
-+HAVE_STRSEP = @HAVE_STRSEP@
-+HAVE_STRTOD = @HAVE_STRTOD@
-+HAVE_STRTOLL = @HAVE_STRTOLL@
-+HAVE_STRTOULL = @HAVE_STRTOULL@
-+HAVE_STRUCT_RANDOM_DATA = @HAVE_STRUCT_RANDOM_DATA@
-+HAVE_STRUCT_TIMEVAL = @HAVE_STRUCT_TIMEVAL@
-+HAVE_STRVERSCMP = @HAVE_STRVERSCMP@
-+HAVE_SYMLINK = @HAVE_SYMLINK@
-+HAVE_SYMLINKAT = @HAVE_SYMLINKAT@
-+HAVE_SYSEXITS_H = @HAVE_SYSEXITS_H@
-+HAVE_SYS_BITYPES_H = @HAVE_SYS_BITYPES_H@
-+HAVE_SYS_INTTYPES_H = @HAVE_SYS_INTTYPES_H@
-+HAVE_SYS_LOADAVG_H = @HAVE_SYS_LOADAVG_H@
-+HAVE_SYS_PARAM_H = @HAVE_SYS_PARAM_H@
-+HAVE_SYS_TIME_H = @HAVE_SYS_TIME_H@
-+HAVE_SYS_TYPES_H = @HAVE_SYS_TYPES_H@
-+HAVE_TIMEGM = @HAVE_TIMEGM@
-+HAVE_UNISTD_H = @HAVE_UNISTD_H@
-+HAVE_UNLINKAT = @HAVE_UNLINKAT@
-+HAVE_UNLOCKPT = @HAVE_UNLOCKPT@
-+HAVE_UNSIGNED_LONG_LONG_INT = @HAVE_UNSIGNED_LONG_LONG_INT@
-+HAVE_USLEEP = @HAVE_USLEEP@
-+HAVE_UTIMENSAT = @HAVE_UTIMENSAT@
-+HAVE_VASPRINTF = @HAVE_VASPRINTF@
-+HAVE_VDPRINTF = @HAVE_VDPRINTF@
-+HAVE_WCHAR_H = @HAVE_WCHAR_H@
-+HAVE_WCHAR_T = @HAVE_WCHAR_T@
-+HAVE_WCPCPY = @HAVE_WCPCPY@
-+HAVE_WCPNCPY = @HAVE_WCPNCPY@
-+HAVE_WCRTOMB = @HAVE_WCRTOMB@
-+HAVE_WCSCASECMP = @HAVE_WCSCASECMP@
-+HAVE_WCSCAT = @HAVE_WCSCAT@
-+HAVE_WCSCHR = @HAVE_WCSCHR@
-+HAVE_WCSCMP = @HAVE_WCSCMP@
-+HAVE_WCSCOLL = @HAVE_WCSCOLL@
-+HAVE_WCSCPY = @HAVE_WCSCPY@
-+HAVE_WCSCSPN = @HAVE_WCSCSPN@
-+HAVE_WCSDUP = @HAVE_WCSDUP@
-+HAVE_WCSLEN = @HAVE_WCSLEN@
-+HAVE_WCSNCASECMP = @HAVE_WCSNCASECMP@
-+HAVE_WCSNCAT = @HAVE_WCSNCAT@
-+HAVE_WCSNCMP = @HAVE_WCSNCMP@
-+HAVE_WCSNCPY = @HAVE_WCSNCPY@
-+HAVE_WCSNLEN = @HAVE_WCSNLEN@
-+HAVE_WCSNRTOMBS = @HAVE_WCSNRTOMBS@
-+HAVE_WCSPBRK = @HAVE_WCSPBRK@
-+HAVE_WCSRCHR = @HAVE_WCSRCHR@
-+HAVE_WCSRTOMBS = @HAVE_WCSRTOMBS@
-+HAVE_WCSSPN = @HAVE_WCSSPN@
-+HAVE_WCSSTR = @HAVE_WCSSTR@
-+HAVE_WCSTOK = @HAVE_WCSTOK@
-+HAVE_WCSWIDTH = @HAVE_WCSWIDTH@
-+HAVE_WCSXFRM = @HAVE_WCSXFRM@
-+HAVE_WCTRANS_T = @HAVE_WCTRANS_T@
-+HAVE_WCTYPE_H = @HAVE_WCTYPE_H@
-+HAVE_WCTYPE_T = @HAVE_WCTYPE_T@
-+HAVE_WINT_T = @HAVE_WINT_T@
-+HAVE_WMEMCHR = @HAVE_WMEMCHR@
-+HAVE_WMEMCMP = @HAVE_WMEMCMP@
-+HAVE_WMEMCPY = @HAVE_WMEMCPY@
-+HAVE_WMEMMOVE = @HAVE_WMEMMOVE@
-+HAVE_WMEMSET = @HAVE_WMEMSET@
-+HAVE__BOOL = @HAVE__BOOL@
-+HAVE__EXIT = @HAVE__EXIT@
-+INCLUDE_NEXT = @INCLUDE_NEXT@
-+INCLUDE_NEXT_AS_FIRST_DIRECTIVE = @INCLUDE_NEXT_AS_FIRST_DIRECTIVE@
-+INSTALL = @INSTALL@
-+INSTALL_DATA = @INSTALL_DATA@
-+INSTALL_PROGRAM = @INSTALL_PROGRAM@
-+INSTALL_SCRIPT = @INSTALL_SCRIPT@
-+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-+INT32_MAX_LT_INTMAX_MAX = @INT32_MAX_LT_INTMAX_MAX@
-+INT64_MAX_EQ_LONG_MAX = @INT64_MAX_EQ_LONG_MAX@
-+INTLLIBS = @INTLLIBS@
-+INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@
-+LDFLAGS = @LDFLAGS@
-+LIBGNU_LIBDEPS = @LIBGNU_LIBDEPS@
-+LIBGNU_LTLIBDEPS = @LIBGNU_LTLIBDEPS@
-+LIBICONV = @LIBICONV@
-+LIBINTL = @LIBINTL@
-+LIBOBJS = @LIBOBJS@
-+LIBS = @LIBS@
-+LIBUNISTRING_UNITYPES_H = @LIBUNISTRING_UNITYPES_H@
-+LIBUNISTRING_UNIWIDTH_H = @LIBUNISTRING_UNIWIDTH_H@
-+LIB_CLOCK_GETTIME = @LIB_CLOCK_GETTIME@
-+LIB_SETSOCKOPT = @LIB_SETSOCKOPT@
-+LOCALCHARSET_TESTS_ENVIRONMENT = @LOCALCHARSET_TESTS_ENVIRONMENT@
-+LOCALE_FR = @LOCALE_FR@
-+LOCALE_FR_UTF8 = @LOCALE_FR_UTF8@
-+LOCALE_JA = @LOCALE_JA@
-+LOCALE_ZH_CN = @LOCALE_ZH_CN@
-+LTLIBICONV = @LTLIBICONV@
-+LTLIBINTL = @LTLIBINTL@
-+LTLIBOBJS = @LTLIBOBJS@
-+MAKEINFO = @MAKEINFO@
-+MKDIR_P = @MKDIR_P@
-+MSGFMT = @MSGFMT@
-+MSGFMT_015 = @MSGFMT_015@
-+MSGMERGE = @MSGMERGE@
-+NEXT_AS_FIRST_DIRECTIVE_DIRENT_H = @NEXT_AS_FIRST_DIRECTIVE_DIRENT_H@
-+NEXT_AS_FIRST_DIRECTIVE_ERRNO_H = @NEXT_AS_FIRST_DIRECTIVE_ERRNO_H@
-+NEXT_AS_FIRST_DIRECTIVE_FCNTL_H = @NEXT_AS_FIRST_DIRECTIVE_FCNTL_H@
-+NEXT_AS_FIRST_DIRECTIVE_FLOAT_H = @NEXT_AS_FIRST_DIRECTIVE_FLOAT_H@
-+NEXT_AS_FIRST_DIRECTIVE_GETOPT_H = @NEXT_AS_FIRST_DIRECTIVE_GETOPT_H@
-+NEXT_AS_FIRST_DIRECTIVE_INTTYPES_H = @NEXT_AS_FIRST_DIRECTIVE_INTTYPES_H@
-+NEXT_AS_FIRST_DIRECTIVE_LANGINFO_H = @NEXT_AS_FIRST_DIRECTIVE_LANGINFO_H@
-+NEXT_AS_FIRST_DIRECTIVE_STDARG_H = @NEXT_AS_FIRST_DIRECTIVE_STDARG_H@
-+NEXT_AS_FIRST_DIRECTIVE_STDDEF_H = @NEXT_AS_FIRST_DIRECTIVE_STDDEF_H@
-+NEXT_AS_FIRST_DIRECTIVE_STDINT_H = @NEXT_AS_FIRST_DIRECTIVE_STDINT_H@
-+NEXT_AS_FIRST_DIRECTIVE_STDIO_H = @NEXT_AS_FIRST_DIRECTIVE_STDIO_H@
-+NEXT_AS_FIRST_DIRECTIVE_STDLIB_H = @NEXT_AS_FIRST_DIRECTIVE_STDLIB_H@
-+NEXT_AS_FIRST_DIRECTIVE_STRINGS_H = @NEXT_AS_FIRST_DIRECTIVE_STRINGS_H@
-+NEXT_AS_FIRST_DIRECTIVE_STRING_H = @NEXT_AS_FIRST_DIRECTIVE_STRING_H@
-+NEXT_AS_FIRST_DIRECTIVE_SYSEXITS_H = @NEXT_AS_FIRST_DIRECTIVE_SYSEXITS_H@
-+NEXT_AS_FIRST_DIRECTIVE_SYS_STAT_H = @NEXT_AS_FIRST_DIRECTIVE_SYS_STAT_H@
-+NEXT_AS_FIRST_DIRECTIVE_SYS_TIME_H = @NEXT_AS_FIRST_DIRECTIVE_SYS_TIME_H@
-+NEXT_AS_FIRST_DIRECTIVE_TIME_H = @NEXT_AS_FIRST_DIRECTIVE_TIME_H@
-+NEXT_AS_FIRST_DIRECTIVE_UNISTD_H = @NEXT_AS_FIRST_DIRECTIVE_UNISTD_H@
-+NEXT_AS_FIRST_DIRECTIVE_WCHAR_H = @NEXT_AS_FIRST_DIRECTIVE_WCHAR_H@
-+NEXT_AS_FIRST_DIRECTIVE_WCTYPE_H = @NEXT_AS_FIRST_DIRECTIVE_WCTYPE_H@
-+NEXT_DIRENT_H = @NEXT_DIRENT_H@
-+NEXT_ERRNO_H = @NEXT_ERRNO_H@
-+NEXT_FCNTL_H = @NEXT_FCNTL_H@
-+NEXT_FLOAT_H = @NEXT_FLOAT_H@
-+NEXT_GETOPT_H = @NEXT_GETOPT_H@
-+NEXT_INTTYPES_H = @NEXT_INTTYPES_H@
-+NEXT_LANGINFO_H = @NEXT_LANGINFO_H@
-+NEXT_STDARG_H = @NEXT_STDARG_H@
-+NEXT_STDDEF_H = @NEXT_STDDEF_H@
-+NEXT_STDINT_H = @NEXT_STDINT_H@
-+NEXT_STDIO_H = @NEXT_STDIO_H@
-+NEXT_STDLIB_H = @NEXT_STDLIB_H@
-+NEXT_STRINGS_H = @NEXT_STRINGS_H@
-+NEXT_STRING_H = @NEXT_STRING_H@
-+NEXT_SYSEXITS_H = @NEXT_SYSEXITS_H@
-+NEXT_SYS_STAT_H = @NEXT_SYS_STAT_H@
-+NEXT_SYS_TIME_H = @NEXT_SYS_TIME_H@
-+NEXT_TIME_H = @NEXT_TIME_H@
-+NEXT_UNISTD_H = @NEXT_UNISTD_H@
-+NEXT_WCHAR_H = @NEXT_WCHAR_H@
-+NEXT_WCTYPE_H = @NEXT_WCTYPE_H@
-+OBJEXT = @OBJEXT@
-+PACKAGE = @PACKAGE@
-+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-+PACKAGE_NAME = @PACKAGE_NAME@
-+PACKAGE_STRING = @PACKAGE_STRING@
-+PACKAGE_TARNAME = @PACKAGE_TARNAME@
-+PACKAGE_VERSION = @PACKAGE_VERSION@
-+PATH_SEPARATOR = @PATH_SEPARATOR@
-+POSUB = @POSUB@
-+PRAGMA_COLUMNS = @PRAGMA_COLUMNS@
-+PRAGMA_SYSTEM_HEADER = @PRAGMA_SYSTEM_HEADER@
-+PRIPTR_PREFIX = @PRIPTR_PREFIX@
-+PRI_MACROS_BROKEN = @PRI_MACROS_BROKEN@
-+PTHREAD_H_DEFINES_STRUCT_TIMESPEC = @PTHREAD_H_DEFINES_STRUCT_TIMESPEC@
-+PTRDIFF_T_SUFFIX = @PTRDIFF_T_SUFFIX@
-+PU_RMT_PROG = @PU_RMT_PROG@
-+RANLIB = @RANLIB@
-+REPLACE_BTOWC = @REPLACE_BTOWC@
-+REPLACE_CALLOC = @REPLACE_CALLOC@
-+REPLACE_CANONICALIZE_FILE_NAME = @REPLACE_CANONICALIZE_FILE_NAME@
-+REPLACE_CHOWN = @REPLACE_CHOWN@
-+REPLACE_CLOSE = @REPLACE_CLOSE@
-+REPLACE_CLOSEDIR = @REPLACE_CLOSEDIR@
-+REPLACE_DIRFD = @REPLACE_DIRFD@
-+REPLACE_DPRINTF = @REPLACE_DPRINTF@
-+REPLACE_DUP = @REPLACE_DUP@
-+REPLACE_DUP2 = @REPLACE_DUP2@
-+REPLACE_FCHOWNAT = @REPLACE_FCHOWNAT@
-+REPLACE_FCLOSE = @REPLACE_FCLOSE@
-+REPLACE_FCNTL = @REPLACE_FCNTL@
-+REPLACE_FDOPENDIR = @REPLACE_FDOPENDIR@
-+REPLACE_FFLUSH = @REPLACE_FFLUSH@
-+REPLACE_FOPEN = @REPLACE_FOPEN@
-+REPLACE_FPRINTF = @REPLACE_FPRINTF@
-+REPLACE_FPURGE = @REPLACE_FPURGE@
-+REPLACE_FREOPEN = @REPLACE_FREOPEN@
-+REPLACE_FSEEK = @REPLACE_FSEEK@
-+REPLACE_FSEEKO = @REPLACE_FSEEKO@
-+REPLACE_FSTAT = @REPLACE_FSTAT@
-+REPLACE_FSTATAT = @REPLACE_FSTATAT@
-+REPLACE_FTELL = @REPLACE_FTELL@
-+REPLACE_FTELLO = @REPLACE_FTELLO@
-+REPLACE_FUTIMENS = @REPLACE_FUTIMENS@
-+REPLACE_GETCWD = @REPLACE_GETCWD@
-+REPLACE_GETDELIM = @REPLACE_GETDELIM@
-+REPLACE_GETDOMAINNAME = @REPLACE_GETDOMAINNAME@
-+REPLACE_GETGROUPS = @REPLACE_GETGROUPS@
-+REPLACE_GETLINE = @REPLACE_GETLINE@
-+REPLACE_GETLOGIN_R = @REPLACE_GETLOGIN_R@
-+REPLACE_GETPAGESIZE = @REPLACE_GETPAGESIZE@
-+REPLACE_GETTIMEOFDAY = @REPLACE_GETTIMEOFDAY@
-+REPLACE_ISWBLANK = @REPLACE_ISWBLANK@
-+REPLACE_ISWCNTRL = @REPLACE_ISWCNTRL@
-+REPLACE_LCHOWN = @REPLACE_LCHOWN@
-+REPLACE_LINK = @REPLACE_LINK@
-+REPLACE_LINKAT = @REPLACE_LINKAT@
-+REPLACE_LOCALTIME_R = @REPLACE_LOCALTIME_R@
-+REPLACE_LSEEK = @REPLACE_LSEEK@
-+REPLACE_LSTAT = @REPLACE_LSTAT@
-+REPLACE_MALLOC = @REPLACE_MALLOC@
-+REPLACE_MBRLEN = @REPLACE_MBRLEN@
-+REPLACE_MBRTOWC = @REPLACE_MBRTOWC@
-+REPLACE_MBSINIT = @REPLACE_MBSINIT@
-+REPLACE_MBSNRTOWCS = @REPLACE_MBSNRTOWCS@
-+REPLACE_MBSRTOWCS = @REPLACE_MBSRTOWCS@
-+REPLACE_MBSTATE_T = @REPLACE_MBSTATE_T@
-+REPLACE_MBTOWC = @REPLACE_MBTOWC@
-+REPLACE_MEMCHR = @REPLACE_MEMCHR@
-+REPLACE_MEMMEM = @REPLACE_MEMMEM@
-+REPLACE_MKDIR = @REPLACE_MKDIR@
-+REPLACE_MKFIFO = @REPLACE_MKFIFO@
-+REPLACE_MKNOD = @REPLACE_MKNOD@
-+REPLACE_MKSTEMP = @REPLACE_MKSTEMP@
-+REPLACE_MKTIME = @REPLACE_MKTIME@
-+REPLACE_NANOSLEEP = @REPLACE_NANOSLEEP@
-+REPLACE_NL_LANGINFO = @REPLACE_NL_LANGINFO@
-+REPLACE_NULL = @REPLACE_NULL@
-+REPLACE_OBSTACK_PRINTF = @REPLACE_OBSTACK_PRINTF@
-+REPLACE_OPEN = @REPLACE_OPEN@
-+REPLACE_OPENAT = @REPLACE_OPENAT@
-+REPLACE_OPENDIR = @REPLACE_OPENDIR@
-+REPLACE_PERROR = @REPLACE_PERROR@
-+REPLACE_POPEN = @REPLACE_POPEN@
-+REPLACE_PREAD = @REPLACE_PREAD@
-+REPLACE_PRINTF = @REPLACE_PRINTF@
-+REPLACE_PUTENV = @REPLACE_PUTENV@
-+REPLACE_PWRITE = @REPLACE_PWRITE@
-+REPLACE_READLINK = @REPLACE_READLINK@
-+REPLACE_REALLOC = @REPLACE_REALLOC@
-+REPLACE_REALPATH = @REPLACE_REALPATH@
-+REPLACE_REMOVE = @REPLACE_REMOVE@
-+REPLACE_RENAME = @REPLACE_RENAME@
-+REPLACE_RENAMEAT = @REPLACE_RENAMEAT@
-+REPLACE_RMDIR = @REPLACE_RMDIR@
-+REPLACE_SETENV = @REPLACE_SETENV@
-+REPLACE_SLEEP = @REPLACE_SLEEP@
-+REPLACE_SNPRINTF = @REPLACE_SNPRINTF@
-+REPLACE_SPRINTF = @REPLACE_SPRINTF@
-+REPLACE_STAT = @REPLACE_STAT@
-+REPLACE_STDIO_WRITE_FUNCS = @REPLACE_STDIO_WRITE_FUNCS@
-+REPLACE_STPNCPY = @REPLACE_STPNCPY@
-+REPLACE_STRCASESTR = @REPLACE_STRCASESTR@
-+REPLACE_STRDUP = @REPLACE_STRDUP@
-+REPLACE_STRERROR = @REPLACE_STRERROR@
-+REPLACE_STRERROR_R = @REPLACE_STRERROR_R@
-+REPLACE_STRNCAT = @REPLACE_STRNCAT@
-+REPLACE_STRNDUP = @REPLACE_STRNDUP@
-+REPLACE_STRNLEN = @REPLACE_STRNLEN@
-+REPLACE_STRSIGNAL = @REPLACE_STRSIGNAL@
-+REPLACE_STRSTR = @REPLACE_STRSTR@
-+REPLACE_STRTOD = @REPLACE_STRTOD@
-+REPLACE_STRTOK_R = @REPLACE_STRTOK_R@
-+REPLACE_SYMLINK = @REPLACE_SYMLINK@
-+REPLACE_TIMEGM = @REPLACE_TIMEGM@
-+REPLACE_TMPFILE = @REPLACE_TMPFILE@
-+REPLACE_TTYNAME_R = @REPLACE_TTYNAME_R@
-+REPLACE_UNLINK = @REPLACE_UNLINK@
-+REPLACE_UNLINKAT = @REPLACE_UNLINKAT@
-+REPLACE_UNSETENV = @REPLACE_UNSETENV@
-+REPLACE_USLEEP = @REPLACE_USLEEP@
-+REPLACE_UTIMENSAT = @REPLACE_UTIMENSAT@
-+REPLACE_VASPRINTF = @REPLACE_VASPRINTF@
-+REPLACE_VDPRINTF = @REPLACE_VDPRINTF@
-+REPLACE_VFPRINTF = @REPLACE_VFPRINTF@
-+REPLACE_VPRINTF = @REPLACE_VPRINTF@
-+REPLACE_VSNPRINTF = @REPLACE_VSNPRINTF@
-+REPLACE_VSPRINTF = @REPLACE_VSPRINTF@
-+REPLACE_WCRTOMB = @REPLACE_WCRTOMB@
-+REPLACE_WCSNRTOMBS = @REPLACE_WCSNRTOMBS@
-+REPLACE_WCSRTOMBS = @REPLACE_WCSRTOMBS@
-+REPLACE_WCSWIDTH = @REPLACE_WCSWIDTH@
-+REPLACE_WCTOB = @REPLACE_WCTOB@
-+REPLACE_WCTOMB = @REPLACE_WCTOMB@
-+REPLACE_WCWIDTH = @REPLACE_WCWIDTH@
-+REPLACE_WRITE = @REPLACE_WRITE@
-+SET_MAKE = @SET_MAKE@
-+SHELL = @SHELL@
-+SIG_ATOMIC_T_SUFFIX = @SIG_ATOMIC_T_SUFFIX@
-+SIZE_T_SUFFIX = @SIZE_T_SUFFIX@
-+STDARG_H = @STDARG_H@
-+STDBOOL_H = @STDBOOL_H@
-+STDDEF_H = @STDDEF_H@
-+STDINT_H = @STDINT_H@
-+STRIP = @STRIP@
-+SYSEXITS_H = @SYSEXITS_H@
-+SYS_TIME_H_DEFINES_STRUCT_TIMESPEC = @SYS_TIME_H_DEFINES_STRUCT_TIMESPEC@
-+TIME_H_DEFINES_STRUCT_TIMESPEC = @TIME_H_DEFINES_STRUCT_TIMESPEC@
-+UINT32_MAX_LT_UINTMAX_MAX = @UINT32_MAX_LT_UINTMAX_MAX@
-+UINT64_MAX_EQ_ULONG_MAX = @UINT64_MAX_EQ_ULONG_MAX@
-+UNDEFINE_STRTOK_R = @UNDEFINE_STRTOK_R@
-+UNISTD_H_HAVE_WINSOCK2_H = @UNISTD_H_HAVE_WINSOCK2_H@
-+UNISTD_H_HAVE_WINSOCK2_H_AND_USE_SOCKETS = @UNISTD_H_HAVE_WINSOCK2_H_AND_USE_SOCKETS@
-+USE_NLS = @USE_NLS@
-+VERSION = @VERSION@
-+WCHAR_T_SUFFIX = @WCHAR_T_SUFFIX@
-+WINT_T_SUFFIX = @WINT_T_SUFFIX@
-+XGETTEXT = @XGETTEXT@
-+XGETTEXT_015 = @XGETTEXT_015@
-+XGETTEXT_EXTRA_OPTIONS = @XGETTEXT_EXTRA_OPTIONS@
-+YACC = @YACC@
-+YFLAGS = @YFLAGS@
-+abs_builddir = @abs_builddir@
-+abs_srcdir = @abs_srcdir@
-+abs_top_builddir = @abs_top_builddir@
-+abs_top_srcdir = @abs_top_srcdir@
-+ac_ct_CC = @ac_ct_CC@
-+am__include = @am__include@
-+am__leading_dot = @am__leading_dot@
-+am__quote = @am__quote@
-+am__tar = @am__tar@
-+am__untar = @am__untar@
-+bindir = @bindir@
-+build = @build@
-+build_alias = @build_alias@
-+build_cpu = @build_cpu@
-+build_os = @build_os@
-+build_vendor = @build_vendor@
-+builddir = @builddir@
-+datadir = @datadir@
-+datarootdir = @datarootdir@
-+docdir = @docdir@
-+dvidir = @dvidir@
-+exec_prefix = @exec_prefix@
-+gl_LIBOBJS = @gl_LIBOBJS@
-+gl_LTLIBOBJS = @gl_LTLIBOBJS@
-+gltests_LIBOBJS = @gltests_LIBOBJS@
-+gltests_LTLIBOBJS = @gltests_LTLIBOBJS@
-+gltests_WITNESS = @gltests_WITNESS@
-+host = @host@
-+host_alias = @host_alias@
-+host_cpu = @host_cpu@
-+host_os = @host_os@
-+host_vendor = @host_vendor@
-+htmldir = @htmldir@
-+includedir = @includedir@
-+infodir = @infodir@
-+install_sh = @install_sh@
-+libdir = @libdir@
-+libexecdir = @libexecdir@
-+lispdir = @lispdir@
-+localedir = @localedir@
-+localstatedir = @localstatedir@
-+mandir = @mandir@
-+mkdir_p = @mkdir_p@
-+oldincludedir = @oldincludedir@
-+pdfdir = @pdfdir@
-+prefix = @prefix@
-+program_transform_name = @program_transform_name@
-+psdir = @psdir@
-+sbindir = @sbindir@
-+sharedstatedir = @sharedstatedir@
-+srcdir = @srcdir@
-+sysconfdir = @sysconfdir@
-+target_alias = @target_alias@
-+top_build_prefix = @top_build_prefix@
-+top_builddir = @top_builddir@
-+top_srcdir = @top_srcdir@
-+info_TEXINFOS = tar.texi
-+tar_TEXINFOS = \
-+ dumpdir.texi\
-+ tar-snapshot-edit.texi\
-+ fdl.texi\
-+ freemanuals.texi\
-+ genfile.texi\
-+ header.texi\
-+ intern.texi\
-+ parse-datetime.texi\
-+ rendition.texi\
-+ snapshot.texi\
-+ sparse.texi\
-+ value.texi
-+
-+EXTRA_DIST = gendocs_template mastermenu.el texify.sed untabify.el
-+
-+# The rendering level is anyone of PUBLISH, DISTRIB or PROOF.
-+# Just call `make RENDITION=PROOF [target]' if you want PROOF rendition.
-+RENDITION = DISTRIB
-+MAKEINFOFLAGS = -D$(RENDITION)
-+GENDOCS = gendocs.sh
-+TEXI2DVI = texi2dvi -t '@set $(RENDITION)' -E
-+all: all-am
-+
-+.SUFFIXES:
-+.SUFFIXES: .dvi .html .info .pdf .ps .texi
-+$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
-+	@for dep in $?; do \
-+	  case '$(am__configure_deps)' in \
-+	    *$$dep*) \
-+	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
-+	        && { if test -f $@; then exit 0; else break; fi; }; \
-+	      exit 1;; \
-+	  esac; \
-+	done; \
-+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnits doc/Makefile'; \
-+	$(am__cd) $(top_srcdir) && \
-+	  $(AUTOMAKE) --gnits doc/Makefile
-+.PRECIOUS: Makefile
-+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
-+	@case '$?' in \
-+	  *config.status*) \
-+	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
-+	  *) \
-+	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
-+	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
-+	esac;
-+
-+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
-+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-+
-+$(top_srcdir)/configure:  $(am__configure_deps)
-+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-+$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
-+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-+$(am__aclocal_m4_deps):
-+
-+.texi.info:
-+	restore=: && backupdir="$(am__leading_dot)am$$$$" && \
-+	am__cwd=`pwd` && $(am__cd) $(srcdir) && \
-+	rm -rf $$backupdir && mkdir $$backupdir && \
-+	if ($(MAKEINFO) --version) >/dev/null 2>&1; then \
-+	  for f in $@ $@-[0-9] $@-[0-9][0-9] $(@:.info=).i[0-9] $(@:.info=).i[0-9][0-9]; do \
-+	    if test -f $$f; then mv $$f $$backupdir; restore=mv; else :; fi; \
-+	  done; \
-+	else :; fi && \
-+	cd "$$am__cwd"; \
-+	if $(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir) \
-+	 -o $@ $<; \
-+	then \
-+	  rc=0; \
-+	  $(am__cd) $(srcdir); \
-+	else \
-+	  rc=$$?; \
-+	  $(am__cd) $(srcdir) && \
-+	  $$restore $$backupdir/* `echo "./$@" | sed 's|[^/]*$$||'`; \
-+	fi; \
-+	rm -rf $$backupdir; exit $$rc
-+
-+.texi.dvi:
-+	TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
-+	MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir)' \
-+	$(TEXI2DVI) $<
-+
-+.texi.pdf:
-+	TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
-+	MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir)' \
-+	$(TEXI2PDF) $<
-+
-+.texi.html:
-+	rm -rf $(@:.html=.htp)
-+	if $(MAKEINFOHTML) $(AM_MAKEINFOHTMLFLAGS) $(MAKEINFOFLAGS) -I $(srcdir) \
-+	 -o $(@:.html=.htp) $<; \
-+	then \
-+	  rm -rf $@; \
-+	  if test ! -d $(@:.html=.htp) && test -d $(@:.html=); then \
-+	    mv $(@:.html=) $@; else mv $(@:.html=.htp) $@; fi; \
-+	else \
-+	  if test ! -d $(@:.html=.htp) && test -d $(@:.html=); then \
-+	    rm -rf $(@:.html=); else rm -Rf $(@:.html=.htp) $@; fi; \
-+	  exit 1; \
-+	fi
-+$(srcdir)/tar.info: tar.texi $(srcdir)/version.texi $(tar_TEXINFOS)
-+tar.dvi: tar.texi $(srcdir)/version.texi $(tar_TEXINFOS)
-+tar.pdf: tar.texi $(srcdir)/version.texi $(tar_TEXINFOS)
-+tar.html: tar.texi $(srcdir)/version.texi $(tar_TEXINFOS)
-+$(srcdir)/version.texi:  $(srcdir)/stamp-vti
-+$(srcdir)/stamp-vti: tar.texi $(top_srcdir)/configure
-+	@(dir=.; test -f ./tar.texi || dir=$(srcdir); \
-+	set `$(SHELL) $(top_srcdir)/build-aux/mdate-sh $$dir/tar.texi`; \
-+	echo "@set UPDATED $$1 $$2 $$3"; \
-+	echo "@set UPDATED-MONTH $$2 $$3"; \
-+	echo "@set EDITION $(VERSION)"; \
-+	echo "@set VERSION $(VERSION)") > vti.tmp
-+	@cmp -s vti.tmp $(srcdir)/version.texi \
-+	  || (echo "Updating $(srcdir)/version.texi"; \
-+	      cp vti.tmp $(srcdir)/version.texi)
-+	-@rm -f vti.tmp
-+	@cp $(srcdir)/version.texi $@
-+
-+mostlyclean-vti:
-+	-rm -f vti.tmp
-+
-+maintainer-clean-vti:
-+	-rm -f $(srcdir)/stamp-vti $(srcdir)/version.texi
-+.dvi.ps:
-+	TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
-+	$(DVIPS) -o $@ $<
-+
-+uninstall-dvi-am:
-+	@$(NORMAL_UNINSTALL)
-+	@list='$(DVIS)'; test -n "$(dvidir)" || list=; \
-+	for p in $$list; do \
-+	  $(am__strip_dir) \
-+	  echo " rm -f '$(DESTDIR)$(dvidir)/$$f'"; \
-+	  rm -f "$(DESTDIR)$(dvidir)/$$f"; \
-+	done
-+
-+uninstall-html-am:
-+	@$(NORMAL_UNINSTALL)
-+	@list='$(HTMLS)'; test -n "$(htmldir)" || list=; \
-+	for p in $$list; do \
-+	  $(am__strip_dir) \
-+	  echo " rm -rf '$(DESTDIR)$(htmldir)/$$f'"; \
-+	  rm -rf "$(DESTDIR)$(htmldir)/$$f"; \
-+	done
-+
-+uninstall-info-am:
-+	@$(PRE_UNINSTALL)
-+	@if test -d '$(DESTDIR)$(infodir)' && \
-+	    (install-info --version && \
-+	     install-info --version 2>&1 | sed 1q | grep -i -v debian) >/dev/null 2>&1; then \
-+	  list='$(INFO_DEPS)'; \
-+	  for file in $$list; do \
-+	    relfile=`echo "$$file" | sed 's|^.*/||'`; \
-+	    echo " install-info --info-dir='$(DESTDIR)$(infodir)' --remove '$(DESTDIR)$(infodir)/$$relfile'"; \
-+	    if install-info --info-dir="$(DESTDIR)$(infodir)" --remove "$(DESTDIR)$(infodir)/$$relfile"; \
-+	    then :; else test ! -f "$(DESTDIR)$(infodir)/$$relfile" || exit 1; fi; \
-+	  done; \
-+	else :; fi
-+	@$(NORMAL_UNINSTALL)
-+	@list='$(INFO_DEPS)'; \
-+	for file in $$list; do \
-+	  relfile=`echo "$$file" | sed 's|^.*/||'`; \
-+	  relfile_i=`echo "$$relfile" | sed 's|\.info$$||;s|$$|.i|'`; \
-+	  (if test -d "$(DESTDIR)$(infodir)" && cd "$(DESTDIR)$(infodir)"; then \
-+	     echo " cd '$(DESTDIR)$(infodir)' && rm -f $$relfile $$relfile-[0-9] $$relfile-[0-9][0-9] $$relfile_i[0-9] $$relfile_i[0-9][0-9]"; \
-+	     rm -f $$relfile $$relfile-[0-9] $$relfile-[0-9][0-9] $$relfile_i[0-9] $$relfile_i[0-9][0-9]; \
-+	   else :; fi); \
-+	done
-+
-+uninstall-pdf-am:
-+	@$(NORMAL_UNINSTALL)
-+	@list='$(PDFS)'; test -n "$(pdfdir)" || list=; \
-+	for p in $$list; do \
-+	  $(am__strip_dir) \
-+	  echo " rm -f '$(DESTDIR)$(pdfdir)/$$f'"; \
-+	  rm -f "$(DESTDIR)$(pdfdir)/$$f"; \
-+	done
-+
-+uninstall-ps-am:
-+	@$(NORMAL_UNINSTALL)
-+	@list='$(PSS)'; test -n "$(psdir)" || list=; \
-+	for p in $$list; do \
-+	  $(am__strip_dir) \
-+	  echo " rm -f '$(DESTDIR)$(psdir)/$$f'"; \
-+	  rm -f "$(DESTDIR)$(psdir)/$$f"; \
-+	done
-+
-+dist-info: $(INFO_DEPS)
-+	@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
-+	list='$(INFO_DEPS)'; \
-+	for base in $$list; do \
-+	  case $$base in \
-+	    $(srcdir)/*) base=`echo "$$base" | sed "s|^$$srcdirstrip/||"`;; \
-+	  esac; \
-+	  if test -f $$base; then d=.; else d=$(srcdir); fi; \
-+	  base_i=`echo "$$base" | sed 's|\.info$$||;s|$$|.i|'`; \
-+	  for file in $$d/$$base $$d/$$base-[0-9] $$d/$$base-[0-9][0-9] $$d/$$base_i[0-9] $$d/$$base_i[0-9][0-9]; do \
-+	    if test -f $$file; then \
-+	      relfile=`expr "$$file" : "$$d/\(.*\)"`; \
-+	      test -f "$(distdir)/$$relfile" || \
-+		cp -p $$file "$(distdir)/$$relfile"; \
-+	    else :; fi; \
-+	  done; \
-+	done
-+
-+mostlyclean-aminfo:
-+	-rm -rf tar.aux tar.cp tar.cps tar.fn tar.kw tar.ky tar.log tar.op tar.ops \
-+	  tar.pg tar.tmp tar.toc tar.tp tar.tps tar.vr
-+
-+clean-aminfo:
-+	-test -z "tar.dvi tar.pdf tar.ps tar.html" \
-+	|| rm -rf tar.dvi tar.pdf tar.ps tar.html
-+
-+maintainer-clean-aminfo:
-+	@list='$(INFO_DEPS)'; for i in $$list; do \
-+	  i_i=`echo "$$i" | sed 's|\.info$$||;s|$$|.i|'`; \
-+	  echo " rm -f $$i $$i-[0-9] $$i-[0-9][0-9] $$i_i[0-9] $$i_i[0-9][0-9]"; \
-+	  rm -f $$i $$i-[0-9] $$i-[0-9][0-9] $$i_i[0-9] $$i_i[0-9][0-9]; \
-+	done
-+tags: TAGS
-+TAGS:
-+
-+ctags: CTAGS
-+CTAGS:
-+
-+
-+distdir: $(DISTFILES)
-+	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
-+	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
-+	list='$(DISTFILES)'; \
-+	  dist_files=`for file in $$list; do echo $$file; done | \
-+	  sed -e "s|^$$srcdirstrip/||;t" \
-+	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
-+	case $$dist_files in \
-+	  */*) $(MKDIR_P) `echo "$$dist_files" | \
-+			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
-+			   sort -u` ;; \
-+	esac; \
-+	for file in $$dist_files; do \
-+	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
-+	  if test -d $$d/$$file; then \
-+	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
-+	    if test -d "$(distdir)/$$file"; then \
-+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
-+	    fi; \
-+	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
-+	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
-+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
-+	    fi; \
-+	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
-+	  else \
-+	    test -f "$(distdir)/$$file" \
-+	    || cp -p $$d/$$file "$(distdir)/$$file" \
-+	    || exit 1; \
-+	  fi; \
-+	done
-+	$(MAKE) $(AM_MAKEFLAGS) \
-+	  top_distdir="$(top_distdir)" distdir="$(distdir)" \
-+	  dist-info
-+check-am: all-am
-+check: check-am
-+all-am: Makefile $(INFO_DEPS)
-+installdirs:
-+	for dir in "$(DESTDIR)$(infodir)"; do \
-+	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
-+	done
-+install: install-am
-+install-exec: install-exec-am
-+install-data: install-data-am
-+uninstall: uninstall-am
-+
-+install-am: all-am
-+	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-+
-+installcheck: installcheck-am
-+install-strip:
-+	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
-+	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
-+	  `test -z '$(STRIP)' || \
-+	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
-+mostlyclean-generic:
-+
-+clean-generic:
-+
-+distclean-generic:
-+	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
-+	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
-+
-+maintainer-clean-generic:
-+	@echo "This command is intended for maintainers to use"
-+	@echo "it deletes files that may require special tools to rebuild."
-+clean: clean-am
-+
-+clean-am: clean-aminfo clean-generic clean-local mostlyclean-am
-+
-+distclean: distclean-am
-+	-rm -f Makefile
-+distclean-am: clean-am distclean-generic
-+
-+dvi: dvi-am
-+
-+dvi-am: $(DVIS)
-+
-+html: html-am
-+
-+html-am: $(HTMLS)
-+
-+info: info-am
-+
-+info-am: $(INFO_DEPS)
-+
-+install-data-am: install-info-am
-+
-+install-dvi: install-dvi-am
-+
-+install-dvi-am: $(DVIS)
-+	@$(NORMAL_INSTALL)
-+	test -z "$(dvidir)" || $(MKDIR_P) "$(DESTDIR)$(dvidir)"
-+	@list='$(DVIS)'; test -n "$(dvidir)" || list=; \
-+	for p in $$list; do \
-+	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
-+	  echo "$$d$$p"; \
-+	done | $(am__base_list) | \
-+	while read files; do \
-+	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(dvidir)'"; \
-+	  $(INSTALL_DATA) $$files "$(DESTDIR)$(dvidir)" || exit $$?; \
-+	done
-+install-exec-am:
-+
-+install-html: install-html-am
-+
-+install-html-am: $(HTMLS)
-+	@$(NORMAL_INSTALL)
-+	test -z "$(htmldir)" || $(MKDIR_P) "$(DESTDIR)$(htmldir)"
-+	@list='$(HTMLS)'; list2=; test -n "$(htmldir)" || list=; \
-+	for p in $$list; do \
-+	  if test -f "$$p" || test -d "$$p"; then d=; else d="$(srcdir)/"; fi; \
-+	  $(am__strip_dir) \
-+	  if test -d "$$d$$p"; then \
-+	    echo " $(MKDIR_P) '$(DESTDIR)$(htmldir)/$$f'"; \
-+	    $(MKDIR_P) "$(DESTDIR)$(htmldir)/$$f" || exit 1; \
-+	    echo " $(INSTALL_DATA) '$$d$$p'/* '$(DESTDIR)$(htmldir)/$$f'"; \
-+	    $(INSTALL_DATA) "$$d$$p"/* "$(DESTDIR)$(htmldir)/$$f" || exit $$?; \
-+	  else \
-+	    list2="$$list2 $$d$$p"; \
-+	  fi; \
-+	done; \
-+	test -z "$$list2" || { echo "$$list2" | $(am__base_list) | \
-+	while read files; do \
-+	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(htmldir)'"; \
-+	  $(INSTALL_DATA) $$files "$(DESTDIR)$(htmldir)" || exit $$?; \
-+	done; }
-+install-info: install-info-am
-+
-+install-info-am: $(INFO_DEPS)
-+	@$(NORMAL_INSTALL)
-+	test -z "$(infodir)" || $(MKDIR_P) "$(DESTDIR)$(infodir)"
-+	@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
-+	list='$(INFO_DEPS)'; test -n "$(infodir)" || list=; \
-+	for file in $$list; do \
-+	  case $$file in \
-+	    $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
-+	  esac; \
-+	  if test -f $$file; then d=.; else d=$(srcdir); fi; \
-+	  file_i=`echo "$$file" | sed 's|\.info$$||;s|$$|.i|'`; \
-+	  for ifile in $$d/$$file $$d/$$file-[0-9] $$d/$$file-[0-9][0-9] \
-+	               $$d/$$file_i[0-9] $$d/$$file_i[0-9][0-9] ; do \
-+	    if test -f $$ifile; then \
-+	      echo "$$ifile"; \
-+	    else : ; fi; \
-+	  done; \
-+	done | $(am__base_list) | \
-+	while read files; do \
-+	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(infodir)'"; \
-+	  $(INSTALL_DATA) $$files "$(DESTDIR)$(infodir)" || exit $$?; done
-+	@$(POST_INSTALL)
-+	@if (install-info --version && \
-+	     install-info --version 2>&1 | sed 1q | grep -i -v debian) >/dev/null 2>&1; then \
-+	  list='$(INFO_DEPS)'; test -n "$(infodir)" || list=; \
-+	  for file in $$list; do \
-+	    relfile=`echo "$$file" | sed 's|^.*/||'`; \
-+	    echo " install-info --info-dir='$(DESTDIR)$(infodir)' '$(DESTDIR)$(infodir)/$$relfile'";\
-+	    install-info --info-dir="$(DESTDIR)$(infodir)" "$(DESTDIR)$(infodir)/$$relfile" || :;\
-+	  done; \
-+	else : ; fi
-+install-man:
-+
-+install-pdf: install-pdf-am
-+
-+install-pdf-am: $(PDFS)
-+	@$(NORMAL_INSTALL)
-+	test -z "$(pdfdir)" || $(MKDIR_P) "$(DESTDIR)$(pdfdir)"
-+	@list='$(PDFS)'; test -n "$(pdfdir)" || list=; \
-+	for p in $$list; do \
-+	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
-+	  echo "$$d$$p"; \
-+	done | $(am__base_list) | \
-+	while read files; do \
-+	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pdfdir)'"; \
-+	  $(INSTALL_DATA) $$files "$(DESTDIR)$(pdfdir)" || exit $$?; done
-+install-ps: install-ps-am
-+
-+install-ps-am: $(PSS)
-+	@$(NORMAL_INSTALL)
-+	test -z "$(psdir)" || $(MKDIR_P) "$(DESTDIR)$(psdir)"
-+	@list='$(PSS)'; test -n "$(psdir)" || list=; \
-+	for p in $$list; do \
-+	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
-+	  echo "$$d$$p"; \
-+	done | $(am__base_list) | \
-+	while read files; do \
-+	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(psdir)'"; \
-+	  $(INSTALL_DATA) $$files "$(DESTDIR)$(psdir)" || exit $$?; done
-+installcheck-am:
-+
-+maintainer-clean: maintainer-clean-am
-+	-rm -f Makefile
-+maintainer-clean-am: distclean-am maintainer-clean-aminfo \
-+	maintainer-clean-generic maintainer-clean-vti
-+
-+mostlyclean: mostlyclean-am
-+
-+mostlyclean-am: mostlyclean-aminfo mostlyclean-generic mostlyclean-vti
-+
-+pdf: pdf-am
-+
-+pdf-am: $(PDFS)
-+
-+ps: ps-am
-+
-+ps-am: $(PSS)
-+
-+uninstall-am: uninstall-dvi-am uninstall-html-am uninstall-info-am \
-+	uninstall-pdf-am uninstall-ps-am
-+
-+.MAKE: install-am install-strip
-+
-+.PHONY: all all-am check check-am clean clean-aminfo clean-generic \
-+	clean-local dist-info distclean distclean-generic distdir dvi \
-+	dvi-am html html-am info info-am install install-am \
-+	install-data install-data-am install-dvi install-dvi-am \
-+	install-exec install-exec-am install-html install-html-am \
-+	install-info install-info-am install-man install-pdf \
-+	install-pdf-am install-ps install-ps-am install-strip \
-+	installcheck installcheck-am installdirs maintainer-clean \
-+	maintainer-clean-aminfo maintainer-clean-generic \
-+	maintainer-clean-vti mostlyclean mostlyclean-aminfo \
-+	mostlyclean-generic mostlyclean-vti pdf pdf-am ps ps-am \
-+	uninstall uninstall-am uninstall-dvi-am uninstall-html-am \
-+	uninstall-info-am uninstall-pdf-am uninstall-ps-am
-+
-+
-+header.texi: $(top_srcdir)/src/tar.h
-+	sed -f $(srcdir)/texify.sed $(top_srcdir)/src/tar.h \
-+	  | expand >$@
-+
-+master-menu: $(tar_TEXINFOS)
-+	emacs -batch -l mastermenu.el -f make-master-menu $(info_TEXINFOS)
-+
-+untabify:
-+	emacs -batch -l untabify.el $(info_TEXINFOS) $(tar_TEXINFOS)
-+
-+final: untabify master-menu
-+
-+# Checking
-+check-format:
-+	@if test -n "`cat $(info_TEXINFOS) $(tar_TEXINFOS) | tr -d -c '\t'`"; then \
-+		echo "Sources contain tabs; run make untabify"; \
-+		false; \
-+	fi
-+
-+check-options:
-+	@ARGP_HELP_FMT='usage-indent=0,short-opt-col=0,long-opt-col=0,doc-opt-col=0,opt-doc-col=0,header-col=0,rmargin=1' \
-+	$(top_builddir)/src/tar --usage | \
-+	sed -n 's/^\[--\([^]\=\[]*\).*/\1/p' | sort | uniq > opts.$$$$;\
-+	$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir) -E - \
-+            $(info_TEXINFOS) | \
-+	sed -n '/^@macro/,/^@end macro/d;s/@opindex *\([^@,]*\).*/\1/p' \
-+	     | sort | uniq > docs.$$$$;\
-+	status=0;\
-+	join -v1 opts.$$$$ docs.$$$$ > report.$$$$;\
-+	if test -s report.$$$$; then \
-+          echo 'Not documented options:'; \
-+          cat report.$$$$; \
-+          status=1; \
-+        fi; \
-+	join -v2 opts.$$$$ docs.$$$$ > report.$$$$;\
-+	if test -s report.$$$$; then \
-+	  echo 'Non-existing options:';\
-+          cat report.$$$$; \
-+          status=1; \
-+        fi; \
-+	rm opts.$$$$ docs.$$$$ report.$$$$;\
-+	test $$status -ne 0 && exit $$status
-+
-+check-refs:
-+	@for file in $(info_TEXINFOS) $(tar_TEXINFOS); \
-+	do \
-+	  sed -e = $$file | \
-+           sed -n 'N;/@FIXME-.*ref/{s/\(^[0-9][0-9]*\).*@FIXME-.*ref{\([^}]*\).*/'$$file':\1: \2/gp}'; \
-+	done > $@-t; \
-+	if [ -s $@-t ]; then \
-+	  echo "Unresolved cross-references:"; \
-+	  cat $@-t;\
-+	  rm $@-t; \
-+	else \
-+	  rm -f $@-t; \
-+	fi
-+
-+check-fixmes:
-+	@for file in $(info_TEXINFOS); \
-+	do \
-+	  sed -e = $$file | \
-+           sed -n 'N;/@FIXME{/{s/\(^[0-9][0-9]*\).*@FIXME{\([^}]*\).*/'$$file':\1: \2/gp}'; \
-+	done > $@-t; \
-+	if [ -s $@-t ]; then \
-+	  echo "Unresolved FIXMEs:"; \
-+	  cat $@-t; \
-+	  rm $@-t; \
-+	  false; \
-+	else \
-+          rm -f $@-t; \
-+	fi
-+
-+check-unrevised:
-+	@grep -Hn @UNREVISED $(info_TEXINFOS) > $@-t; \
-+	if [ -s $@-t ]; then \
-+	  echo "Unrevised nodes:"; \
-+	  cat $@-t; \
-+	  rm $@-t; \
-+	  false;\
-+	else \
-+          rm $@-t; \
-+	fi
-+
-+all-check-docs: check-format check-options check-refs check-fixmes check-unrevised
-+
-+check-docs:
-+	$(MAKE) -k all-check-docs
-+
-+#
-+
-+clean-local:
-+	rm -rf manual
-+
-+# Make sure you set TEXINPUTS
-+# Usual value is:
-+# /usr/share/texmf/pdftex/plain/misc:/usr/share/texmf/pdftex/config
-+manual:
-+	TEXINPUTS=$(srcdir):$(top_srcdir)/build-tex:$(TEXINPUTS) \
-+	 MAKEINFO="$(MAKEINFO) $(MAKEINFOFLAGS)" \
-+	 TEXI2DVI="$(TEXI2DVI) -t @finalout" \
-+	$(GENDOCS) --texi2html tar 'GNU tar manual'
-+
-+# Tell versions [3.59,3.63) of GNU make to not export all variables.
-+# Otherwise a system limit (for SysV at least) may be exceeded.
-+.NOEXPORT:
-diff -Naur tar-1.26.orig/doc/tar.1 tar-1.26/doc/tar.1
---- tar-1.26.orig/doc/tar.1	1970-01-01 00:00:00.000000000 +0000
-+++ tar-1.26/doc/tar.1	2011-05-18 17:55:36.872098438 +0000
-@@ -0,0 +1,366 @@
-+.\" generated by script on Sat Jan  8 16:53:11 2011
-+.Dd Jan  8, 2011
-+.Dt TAR 1
-+.Sh NAME
-+.Nm tar
-+.Nd The GNU version of the tar archiving utility
-+.Sh SYNOPSIS
-+.Nm tar
-+.Oo Fl Oc Cm A Fl \-catenate \-concatenate Cm \||\| c Fl \-create Cm \||\| d Fl \-diff \-compare Cm \||\| Fl \-delete Cm \||\| r Fl \-append Cm \||\| t Fl \-list Cm \||\| Fl \-test\-label Cm \||\| u Fl \-update Cm \||\| x Fl \-extract \-get
-+.Op Ar options
-+.Op Ar pathname ...
-+.Sh DESCRIPTION
-+.Nm Tar
-+stores and extracts files from a tape or disk archive.
-+.Pp
-+The first argument to
-+tar
-+should be a function; either one of the letters
-+.Cm Acdrtux ,
-+or one of the long function names.
-+A function letter need not be prefixed with ``\-'', and may be combined
-+with other single-letter options.
-+A long function name must be prefixed with
-+.Cm \\-\\- .
-+Some options take a parameter; with the single-letter form
-+these must be given as separate arguments.
-+With the long form, they may be given by appending
-+.Cm = Ns Ar value
-+to the option.
-+.Sh FUNCTION LETTERS
-+Main operation mode:
-+.Bl -tag -width flag
-+.It Fl A , Fl \-catenate , Fl \-concatenate
-+append tar files to an archive
-+.It Fl c , Fl \-create
-+create a new archive
-+.It Fl d , Fl \-diff , Fl \-compare
-+find differences between archive and file system
-+.It Fl \-delete
-+delete from the archive (not on mag tapes!)
-+.It Fl r , Fl \-append
-+append files to the end of an archive
-+.It Fl t , Fl \-list
-+list the contents of an archive
-+.It Fl \-test\-label
-+test the archive volume label and exit
-+.It Fl u , Fl \-update
-+only append files newer than copy in archive
-+.It Fl x , Fl \-extract , Fl \-get
-+extract files from an archive
-+.El
-+.Sh OTHER OPTIONS
-+Operation modifiers:
-+.Bl -tag -width flag
-+.It \-[0\-7][lmh]
-+specify drive and density
-+.It Fl a , Fl \-auto\-compress
-+use archive suffix to determine the compression program
-+.It Fl \-add\-file Ns \= Ns Ar FILE
-+add given FILE to the archive (useful if its name starts with a dash)
-+.It Fl \-anchored
-+patterns match file name start
-+.It Fl \-no\-anchored
-+patterns match after any `/' (default for exclusion)
-+.It Fl \-atime\-preserve
-+preserve access times on dumped files, either by restoring the times
-+.It Fl \-no\-auto\-compress
-+do not use archive suffix to determine the compression program
-+.It Fl b , Fl \-blocking\-factor Ar BLOCKS
-+BLOCKS x 512 bytes per record
-+.It Fl B , Fl \-read\-full\-records
-+reblock as we read (for 4.2BSD pipes)
-+.It Fl \-backup
-+backup before removal, choose version CONTROL
-+.It Fl C , Fl \-directory Ar DIR
-+change to directory DIR
-+.It Fl \-check\-device
-+check device numbers when creating incremental archives (default)
-+.It Fl \-no\-check\-device
-+do not check device numbers when creating incremental archives
-+.It Fl \-checkpoint
-+display progress messages every NUMBERth record (default 10)
-+.It Fl \-checkpoint\-action Ns \= Ns Ar ACTION
-+execute ACTION on each checkpoint
-+.It Fl \-delay\-directory\-restore
-+delay setting modification times and permissions of extracted
-+.It Fl \-no\-delay\-directory\-restore
-+cancel the effect of --delay-directory-restore option
-+.It Fl \-exclude Ns \= Ns Ar PATTERN
-+exclude files, given as a PATTERN
-+.It Fl \-exclude\-backups
-+exclude backup and lock files
-+.It Fl \-exclude\-caches
-+exclude contents of directories containing CACHEDIR.TAG, 
-+.It Fl \-exclude\-caches\-all
-+exclude directories containing CACHEDIR.TAG
-+.It Fl \-exclude\-caches\-under
-+exclude everything under directories containing CACHEDIR.TAG
-+.It Fl \-exclude\-tag Ns \= Ns Ar FILE
-+exclude contents of directories containing FILE, except
-+.It Fl \-exclude\-tag\-all Ns \= Ns Ar FILE
-+exclude directories containing FILE
-+.It Fl \-exclude\-tag\-under Ns \= Ns Ar FILE
-+exclude everything under directories containing FILE
-+.It Fl \-exclude\-vcs
-+exclude version control system directories
-+.It Fl f , Fl \-file Ar ARCHIVE
-+use archive file or device ARCHIVE
-+.It Fl F , Fl \-info\-script , Fl \-new\-volume\-script Ar NAME
-+run script at end of each tape (implies -M)
-+.It Fl \-force\-local
-+archive file is local even if it has a colon
-+.It Fl \-full\-time
-+print file time to its full resolution
-+.It Fl g , Fl \-listed\-incremental Ar FILE
-+handle new GNU-format incremental backup
-+.It Fl G , Fl \-incremental
-+handle old GNU-format incremental backup
-+.It Fl \-group Ns \= Ns Ar NAME
-+force NAME as group for added files
-+.It Fl h , Fl \-dereference
-+follow symlinks; archive and dump the files they point to
-+.It Fl H , Fl \-format Ar FORMAT
-+create archive of the given formatFORMAT is one of the following:
-+.Bl -tag -width flag
-+.It Fl \-format=gnu
-+GNU tar 1.13.x format
-+.It Fl \-format=oldgnu
-+GNU format as per tar <= 1.12
-+.It Fl \-format=pax
-+POSIX 1003.1-2001 (pax) format
-+.It Fl \-format=posix
-+same as pax
-+.It Fl \-format=ustar
-+POSIX 1003.1-1988 (ustar) format
-+.It Fl \-format=v7
-+old V7 tar format
-+.El
-+.It Fl \-hard\-dereference
-+follow hard links; archive and dump the files they refer to
-+.It Fl i , Fl \-ignore\-zeros
-+ignore zeroed blocks in archive (means EOF)
-+.It Fl I , Fl \-use\-compress\-program Ar PROG
-+filter through PROG (must accept -d)
-+.It Fl \-ignore\-case
-+ignore case
-+.It Fl \-no\-ignore\-case
-+case sensitive matching (default)
-+.It Fl \-ignore\-command\-error
-+ignore exit codes of children
-+.It Fl \-no\-ignore\-command\-error
-+treat non-zero exit codes of children as error
-+.It Fl \-ignore\-failed\-read
-+do not exit with nonzero on unreadable files
-+.It Fl \-index\-file Ns \= Ns Ar FILE
-+send verbose output to FILE
-+.It Fl j , Fl \-bzip2
-+
-+.It Fl J , Fl \-xz
-+
-+.It Fl k , Fl \-keep\-old\-files
-+don't replace existing files when extracting
-+.It Fl K , Fl \-starting\-file Ar MEMBER-NAME
-+begin at member MEMBER-NAME in the archive
-+.It Fl \-keep\-newer\-files
-+don't replace existing files that are newer than their archive copies
-+.It Fl l , Fl \-check\-links
-+print a message if not all links are dumped
-+.It Fl L , Fl \-tape\-length Ar NUMBER
-+change tape after writing NUMBER x 1024 bytes
-+.It Fl \-level Ns \= Ns Ar NUMBER
-+dump level for created listed-incremental archive
-+.It Fl \-lzip
-+
-+.It Fl \-lzma
-+
-+.It Fl \-lzop
-+
-+.It Fl m , Fl \-touch
-+don't extract file modified time
-+.It Fl M , Fl \-multi\-volume
-+create/list/extract multi-volume archive
-+.It Fl \-mode Ns \= Ns Ar CHANGES
-+force (symbolic) mode CHANGES for added files
-+.It Fl \-mtime Ns \= Ns Ar DATE-OR-FILE
-+set mtime for added files from DATE-OR-FILE
-+.It Fl n , Fl \-seek
-+archive is seekable
-+.It Fl N , Fl \-newer , Fl \-after\-date Ar DATE-OR-FILE
-+only store files newer than DATE-OR-FILE
-+.It Fl \-newer\-mtime Ns \= Ns Ar DATE
-+compare date and time when data changed only
-+.It Fl \-null
-+-T reads null-terminated names, disable -C
-+.It Fl \-no\-null
-+disable the effect of the previous --null option
-+.It Fl \-numeric\-owner
-+always use numbers for user/group names
-+.It Fl O , Fl \-to\-stdout
-+extract files to standard output
-+.It Fl \-occurrence
-+process only the NUMBERth occurrence of each file in the archive;
-+.It Fl \-old\-archive , Fl \-portability
-+same as --format=v7
-+.It Fl \-one\-file\-system
-+stay in local file system when creating archive
-+.It Fl \-overwrite
-+overwrite existing files when extracting
-+.It Fl \-overwrite\-dir
-+overwrite metadata of existing directories when extracting (default)
-+.It Fl \-no\-overwrite\-dir
-+preserve metadata of existing directories
-+.It Fl \-owner Ns \= Ns Ar NAME
-+force NAME as owner for added files
-+.It Fl p , Fl \-preserve\-permissions , Fl \-same\-permissions
-+extract information about file permissions (default for superuser)
-+.It Fl P , Fl \-absolute\-names
-+don't strip leading `/'s from file names
-+.It Fl \-pax\-option Ns \= Ns Ar keyword[[:]=value][,keyword[[:]=value]]...
-+control pax keywords
-+.It Fl \-posix
-+same as --format=posix
-+.It Fl \-preserve
-+same as both -p and -s
-+.It Fl \-quote\-chars Ns \= Ns Ar STRING
-+additionally quote characters from STRING
-+.It Fl \-no\-quote\-chars Ns \= Ns Ar STRING
-+disable quoting for characters from STRING
-+.It Fl \-quoting\-style Ns \= Ns Ar STYLE
-+set name quoting style; see below for valid STYLE values
-+.It Fl R , Fl \-block\-number
-+show block number within archive with each message
-+.It Fl \-record\-size Ns \= Ns Ar NUMBER
-+NUMBER of bytes per record, multiple of 512
-+.It Fl \-recursion
-+recurse into directories (default)
-+.It Fl \-no\-recursion
-+avoid descending automatically in directories
-+.It Fl \-recursive\-unlink
-+empty hierarchies prior to extracting directory
-+.It Fl \-remove\-files
-+remove files after adding them to the archive
-+.It Fl \-restrict
-+disable use of some potentially harmful options
-+.It Fl \-rmt\-command Ns \= Ns Ar COMMAND
-+use given rmt COMMAND instead of rmt
-+.It Fl \-rsh\-command Ns \= Ns Ar COMMAND
-+use remote COMMAND instead of rsh
-+.It Fl s , Fl \-preserve\-order , Fl \-same\-order
-+sort names to extract to match archive
-+.It Fl S , Fl \-sparse
-+handle sparse files efficiently
-+.It Fl \-same\-owner
-+try extracting files with the same ownership as exists in the archive (default for superuser)
-+.It Fl \-no\-same\-owner
-+extract files as yourself (default for ordinary users)
-+.It Fl \-no\-same\-permissions
-+apply the user's umask when extracting permissions from the archive (default for ordinary users)
-+.It Fl \-no\-seek
-+archive is not seekable
-+.It Fl \-show\-defaults
-+show tar defaults
-+.It Fl \-show\-omitted\-dirs
-+when listing or extracting, list each directory that does not match search criteria
-+.It Fl \-show\-transformed\-names , Fl \-show\-stored\-names
-+show file or archive names after transformation
-+.It Fl \-sparse\-version Ns \= Ns Ar MAJOR[.MINOR]
-+set version of the sparse format to use (implies --sparse)
-+.It Fl \-strip\-components Ns \= Ns Ar NUMBER
-+strip NUMBER leading components from file names on extraction
-+.It Fl \-suffix Ns \= Ns Ar STRING
-+backup before removal, override usual suffix ('~' unless overridden by environment variable SIMPLE_BACKUP_SUFFIX)
-+.It Fl T , Fl \-files\-from Ar FILE
-+get names to extract or create from FILE
-+.It Fl \-to\-command Ns \= Ns Ar COMMAND
-+pipe extracted files to another program
-+.It Fl \-totals
-+print total bytes after processing the archive; 
-+.It Fl \-transform , Fl \-xform Ar EXPRESSION
-+use sed replace EXPRESSION to transform file names
-+.It Fl U , Fl \-unlink\-first
-+remove each file prior to extracting over it
-+.It Fl \-unquote
-+unquote filenames read with -T (default)
-+.It Fl \-no\-unquote
-+do not unquote filenames read with -T
-+.It Fl \-utc
-+print file modification times in UTC
-+.It Fl v , Fl \-verbose
-+verbosely list files processed
-+.It Fl V , Fl \-label Ar TEXT
-+create archive with volume name TEXT; at list/extract time, use TEXT as a globbing pattern for volume name
-+.It Fl \-volno\-file Ns \= Ns Ar FILE
-+use/update the volume number in FILE
-+.It Fl w , Fl \-interactive , Fl \-confirmation
-+ask for confirmation for every action
-+.It Fl W , Fl \-verify
-+attempt to verify the archive after writing it
-+.It Fl \-warning Ns \= Ns Ar KEYWORD
-+warning control
-+.It Fl \-wildcards
-+use wildcards (default for exclusion)
-+.It Fl \-wildcards\-match\-slash
-+wildcards match `/' (default for exclusion)
-+.It Fl \-no\-wildcards\-match\-slash
-+wildcards do not match `/'
-+.It Fl \-no\-wildcards
-+verbatim string matching
-+.It Fl X , Fl \-exclude\-from Ar FILE
-+exclude patterns listed in FILE
-+.It Fl z , Fl \-gzip , Fl \-gunzip Fl \-ungzip
-+
-+.It Fl Z , Fl \-compress , Fl \-uncompress
-+
-+.El
-+.Sh ENVIRONMENT
-+The behavior of tar is controlled by the following environment variables,
-+among others:
-+.Bl -tag -width Ds
-+.It Ev SIMPLE_BACKUP_SUFFIX
-+Backup prefix to use when extracting, if
-+.Fl \-suffix
-+is not specified.
-+The backup suffix defaults to `~' if neither is specified.
-+.It Ev TAR_OPTIONS
-+Options to prepend to those specified on the command line, separated by
-+whitespace.  Embedded backslashes may be used to escape whitespace or
-+backslashes within an option.
-+.It Ev TAPE
-+Device or file to use for the archive if 
-+.Fl \-file
-+is not specified.
-+If this environment variable is unset, use stdin or stdout instead.
-+.El
-+.Sh EXAMPLES
-+Create archive.tar from files foo and bar.
-+.Bd -literal -offset indent -compact
-+tar \-cf archive.tar foo bar
-+.Ed
-+List all files in archive.tar verbosely.
-+.Bd -literal -offset indent -compact
-+tar \-tvf archive.tar
-+.Ed
-+Extract all files from archive.tar.
-+.Bd -literal -offset indent -compact
-+tar \-xf archive.tar
-+.Ed
-+.Sh SEE ALSO
-+.\" libarchive
-+.Xr tar 5 ,
-+.\" man-pages
-+.Xr symlink 7 ,
-+.Xr rmt 8
-+.Sh HISTORY
-+The
-+.Nm tar
-+command appeared in
-+.At v7 .
-+.Sh BUGS
-+The GNU folks, in general, abhor man pages, and create info documents instead.
-+Unfortunately, the info document describing tar is licensed under the GFDL with
-+invariant cover texts, which makes it impossible to include any text
-+from that document in this man page.
-+Most of the text in this document was automatically extracted from the usage
-+text in the source.
-+It may not completely describe all features of the program.
