Index: BOOK/boot/mips/bootloaders.xml
===================================================================
--- BOOK/boot/mips/bootloaders.xml	(revision 51bdc83af6d13de0863881bc8b144b36d2d8015d)
+++ BOOK/boot/mips/bootloaders.xml	(revision 6aff9c0d24293e97f25a7b4034db5740e4d7e64c)
@@ -12,7 +12,7 @@
 
   <para>On MIPS based platforms, we have 2 different bootloaders - Colo
-  for the Cobalt based MIPS machines and Arcload for the SGI Machines.
+  for the Cobalt based MIPS machines and Arcload for the SGI machines.
   At this time, in the boot scenario, the only bootloader we can build
-  and that is usable is Cobalt bootloader. On SGI Machines that follow
+  and that is usable is Cobalt bootloader. On SGI machines that follow
   this build method, we recommend to do a netboot. Information about
   netbooting can be found at the link below.</para>
Index: BOOK/cross-tools/native64/variables.xml
===================================================================
--- BOOK/cross-tools/native64/variables.xml	(revision 51bdc83af6d13de0863881bc8b144b36d2d8015d)
+++ BOOK/cross-tools/native64/variables.xml	(revision 6aff9c0d24293e97f25a7b4034db5740e4d7e64c)
@@ -43,6 +43,6 @@
 <screen os="k"><userinput>export CLFS_TARGET32="sparcv9-unknown-linux-gnu"</userinput></screen>
 
-  <para os="l">For All Others consult the CLFS Book for that architicure. In Chapter 5 for
-   the information.</para>
+  <para os="l">For all others consult the CLFS Book for the appropriate
+  architecture, in Chapter 5.</para>
 
     <xi:include xmlns:xi="http://www.w3.org/2003/XInclude"
Index: BOOK/final-system/64/binutils.xml
===================================================================
--- BOOK/final-system/64/binutils.xml	(revision 51bdc83af6d13de0863881bc8b144b36d2d8015d)
+++ BOOK/final-system/64/binutils.xml	(revision 6aff9c0d24293e97f25a7b4034db5740e4d7e64c)
@@ -50,8 +50,10 @@
     xpointer="xpointer(//*[@os='p2'])"/>
 
-    <para os="q1">Libiberty uses <command>gcc -print-multi-os-directory</command>
-    to determine where to install libiberty.a.  Because our temporary gcc is
-    still multilib-aware, the command returns <literal>../lib64</literal> which
-    causes the archive to be installed into /usr/lib64.  The following sed will
+    <para os="q1">Libiberty uses
+    <command>gcc -print-multi-os-directory</command> to determine where to
+    install <filename class="libraryfile">libiberty.a</filename>. Because our
+    temporary GCC is still multilib-aware, the command returns
+    <literal>../lib64</literal> which causes the archive to be installed into
+    <filename class="directory">/usr/lib64</filename>.  The following sed will
     prevent this:</para>
 
@@ -109,6 +111,6 @@
 
     <para os="w1">Now that the tests have completed, remove the symlinks in
-    /usr/lib64 - they should be the only things in that directory, so we
-    can remove it without force :</para>
+    <filename class="directory">/usr/lib64</filename> - they should be the
+    only things in that directory, so we can remove it without force:</para>
 
 <screen os="w2"><userinput>rm -v /usr/lib64/libstd*so*
Index: BOOK/final-system/common/sysvinit.xml
===================================================================
--- BOOK/final-system/common/sysvinit.xml	(revision 51bdc83af6d13de0863881bc8b144b36d2d8015d)
+++ BOOK/final-system/common/sysvinit.xml	(revision 6aff9c0d24293e97f25a7b4034db5740e4d7e64c)
@@ -91,5 +91,5 @@
 
     <para>If your system has a serial console run the following command to add
-    the entry to <filename>/etc/inittab</filename>.</para>
+    the entry to <filename>/etc/inittab</filename>:</para>
 
 <screen><userinput>cat &gt;&gt; /etc/inittab &lt;&lt; "EOF"
@@ -98,5 +98,5 @@
 EOF</userinput></screen>
 
-   <para>Finally, Add the end line to <filename>/etc/inittab</filename>.</para>
+   <para>Finally, add the end line to <filename>/etc/inittab</filename>:</para>
 
 <screen><userinput>cat &gt;&gt; /etc/inittab &lt;&lt; "EOF"
Index: BOOK/final-system/multilib/gmp-64bit.xml
===================================================================
--- BOOK/final-system/multilib/gmp-64bit.xml	(revision 51bdc83af6d13de0863881bc8b144b36d2d8015d)
+++ BOOK/final-system/multilib/gmp-64bit.xml	(revision 6aff9c0d24293e97f25a7b4034db5740e4d7e64c)
@@ -72,5 +72,5 @@
 <screen os="k"><userinput>mv -v /usr/include/gmp{,-64}.h</userinput></screen>
 
-    <para os="l">Finally, Create a stub header in the place of the originals:</para>
+    <para os="l">Finally, create a stub header in the place of the originals:</para>
 
 <screen os="m"><userinput>cat &gt; /usr/include/gmp.h &lt;&lt; "EOF"
Index: BOOK/final-system/x86_64-64/binutils.xml
===================================================================
--- BOOK/final-system/x86_64-64/binutils.xml	(revision 51bdc83af6d13de0863881bc8b144b36d2d8015d)
+++ BOOK/final-system/x86_64-64/binutils.xml	(revision 6aff9c0d24293e97f25a7b4034db5740e4d7e64c)
@@ -98,6 +98,7 @@
     xpointer="xpointer(//*[@os='o'])"/>
 
-      <para>The ld test suite accesses <filename>/lib64/ld-linux-x86-64.so</filename>
-         in some of the tests. The following symbolic link will allow this:</para>
+      <para>The <command>ld</command> test suite accesses
+      <filename>/lib64/ld-linux-x86-64.so</filename> in some of the tests.
+      The following symbolic link will allow this:</para>
 
 <screen><userinput>ln -sv /lib /lib64</userinput></screen>
Index: BOOK/introduction/common/whatsnew.xml
===================================================================
--- BOOK/introduction/common/whatsnew.xml	(revision 51bdc83af6d13de0863881bc8b144b36d2d8015d)
+++ BOOK/introduction/common/whatsnew.xml	(revision 6aff9c0d24293e97f25a7b4034db5740e4d7e64c)
@@ -11,5 +11,5 @@
   <title>What's new since the last release.</title>
 
-  <para>Below is a list of package updates  made since the previous release of the book.</para>
+  <para>Below is a list of package updates made since the previous release of the book.</para>
 
   <itemizedlist>
Index: BOOK/partitioning/sparc/creatingpartition.xml
===================================================================
--- BOOK/partitioning/sparc/creatingpartition.xml	(revision 51bdc83af6d13de0863881bc8b144b36d2d8015d)
+++ BOOK/partitioning/sparc/creatingpartition.xml	(revision 6aff9c0d24293e97f25a7b4034db5740e4d7e64c)
@@ -31,5 +31,5 @@
   xpointer="xpointer(//*[@os='e'])"/>
 
-  <para>On a Sparc system we have to create an special partition first. This
+  <para>On a Sparc system we have to create a special partition first. This
   partition is called <quote>Whole disk</quote>, and must be the 3rd partition
   on the disk.</para>
