Index: patches/linux-2.6.19.1-tulip-1.patch
===================================================================
--- patches/linux-2.6.19.1-tulip-1.patch	(revision 30f7bcde121cb50cd761a319ca26448ca616ca0f)
+++ patches/linux-2.6.19.1-tulip-1.patch	(revision 30f7bcde121cb50cd761a319ca26448ca616ca0f)
@@ -0,0 +1,123 @@
+Submitted By: Jim Gifford (patches at jg555 dot com)
+Date: 2006-11-29
+Initial Package Version: 2.6.19
+Origin: Grant Gundler (parisc linux)
+Upstream Status: in -mm
+Description: Make the tulip drivers follow the chipset specs
+
+diff -Naur linux-2.6.19.orig/drivers/net/tulip/21142.c linux-2.6.19/drivers/net/tulip/21142.c
+--- linux-2.6.19.orig/drivers/net/tulip/21142.c	2006-11-29 13:57:37.000000000 -0800
++++ linux-2.6.19/drivers/net/tulip/21142.c	2006-11-29 19:27:20.000000000 -0800
+@@ -172,7 +172,7 @@
+ 			int i;
+ 			for (i = 0; i < tp->mtable->leafcount; i++)
+ 				if (tp->mtable->mleaf[i].media == dev->if_port) {
+-					int startup = ! ((tp->chip_id == DC21143 && (tp->revision == 48 || tp->revision == 65)));
++					int startup = ! ((tp->chip_id == DC21143 && tp->revision == 65));
+ 					tp->cur_index = i;
+ 					tulip_select_media(dev, startup);
+ 					setup_done = 1;
+diff -Naur linux-2.6.19.orig/drivers/net/tulip/media.c linux-2.6.19/drivers/net/tulip/media.c
+--- linux-2.6.19.orig/drivers/net/tulip/media.c	2006-11-29 13:57:37.000000000 -0800
++++ linux-2.6.19/drivers/net/tulip/media.c	2006-11-29 19:27:20.000000000 -0800
+@@ -44,8 +44,10 @@
+ 
+ /* MII transceiver control section.
+    Read and write the MII registers using software-generated serial
+-   MDIO protocol.  See the MII specifications or DP83840A data sheet
+-   for details. */
++   MDIO protocol.
++   See IEEE 802.3-2002.pdf (Section 2, Chapter "22.2.4 Management functions")
++   or DP83840A data sheet for more details.
++   */
+ 
+ int tulip_mdio_read(struct net_device *dev, int phy_id, int location)
+ {
+@@ -261,24 +263,56 @@
+ 				u16 *reset_sequence = &((u16*)(p+3))[init_length];
+ 				int reset_length = p[2 + init_length*2];
+ 				misc_info = reset_sequence + reset_length;
+-				if (startup)
++				if (startup) {
++					int timeout = 10;	/* max 1 ms */
+ 					for (i = 0; i < reset_length; i++)
+ 						iowrite32(get_u16(&reset_sequence[i]) << 16, ioaddr + CSR15);
++				
++					/* flush posted writes */
++					ioread32(ioaddr + CSR15);
++
++					/* Sect 3.10.3 in DP83840A.pdf (p39) */
++					udelay(500);
++
++					/* Section 4.2 in DP83840A.pdf (p43) */
++					/* and IEEE 802.3 "22.2.4.1.1 Reset" */
++					while (timeout-- &&
++						(tulip_mdio_read (dev, phy_num, MII_BMCR) & BMCR_RESET))
++						udelay(100);
++				}
+ 				for (i = 0; i < init_length; i++)
+ 					iowrite32(get_u16(&init_sequence[i]) << 16, ioaddr + CSR15);
++
++				ioread32(ioaddr + CSR15);	/* flush posted writes */
+ 			} else {
+ 				u8 *init_sequence = p + 2;
+ 				u8 *reset_sequence = p + 3 + init_length;
+ 				int reset_length = p[2 + init_length];
+ 				misc_info = (u16*)(reset_sequence + reset_length);
+ 				if (startup) {
++					int timeout = 10;	/* max 1 ms */
+ 					iowrite32(mtable->csr12dir | 0x100, ioaddr + CSR12);
+ 					for (i = 0; i < reset_length; i++)
+ 						iowrite32(reset_sequence[i], ioaddr + CSR12);
++
++					/* flush posted writes */
++					ioread32(ioaddr + CSR12);
++
++					/* Sect 3.10.3 in DP83840A.pdf (p39) */
++					udelay(500);
++
++					/* Section 4.2 in DP83840A.pdf (p43) */
++					/* and IEEE 802.3 "22.2.4.1.1 Reset" */
++					while (timeout-- &&
++						(tulip_mdio_read (dev, phy_num, MII_BMCR) & BMCR_RESET))
++						udelay(100);
+ 				}
+ 				for (i = 0; i < init_length; i++)
+ 					iowrite32(init_sequence[i], ioaddr + CSR12);
++
++				ioread32(ioaddr + CSR12);	/* flush posted writes */
+ 			}
++
+ 			tmp_info = get_u16(&misc_info[1]);
+ 			if (tmp_info)
+ 				tp->advertising[phy_num] = tmp_info | 1;
+diff -Naur linux-2.6.19.orig/drivers/net/tulip/tulip.h linux-2.6.19/drivers/net/tulip/tulip.h
+--- linux-2.6.19.orig/drivers/net/tulip/tulip.h	2006-11-29 13:57:37.000000000 -0800
++++ linux-2.6.19/drivers/net/tulip/tulip.h	2006-11-29 19:27:20.000000000 -0800
+@@ -481,8 +481,11 @@
+ 			udelay(10);
+ 
+ 		if (!i)
+-			printk(KERN_DEBUG "%s: tulip_stop_rxtx() failed\n",
+-					pci_name(tp->pdev));
++			printk(KERN_DEBUG "%s: tulip_stop_rxtx() failed"
++					" (CSR5 0x%x CSR6 0x%x)\n",
++					pci_name(tp->pdev),
++					ioread32(ioaddr + CSR5),
++					ioread32(ioaddr + CSR6));
+ 	}
+ }
+ 
+diff -Naur linux-2.6.19.orig/drivers/net/tulip/tulip_core.c linux-2.6.19/drivers/net/tulip/tulip_core.c
+--- linux-2.6.19.orig/drivers/net/tulip/tulip_core.c	2006-11-29 13:57:37.000000000 -0800
++++ linux-2.6.19/drivers/net/tulip/tulip_core.c	2006-11-29 19:27:20.000000000 -0800
+@@ -21,7 +21,7 @@
+ #else
+ #define DRV_VERSION	"1.1.14"
+ #endif
+-#define DRV_RELDATE	"May 11, 2002"
++#define DRV_RELDATE	"December 15, 2004"
+ 
+ 
+ #include <linux/module.h>
+
