source: scripts/scripts/target-scripts/target-gcc.sh@ e0507947

clfs-1.2 clfs-2.1 clfs-3.0.0-systemd clfs-3.0.0-sysvinit systemd sysvinit
Last change on this file since e0507947 was e0507947, checked in by Jim Gifford <clfs@…>, 19 years ago

r2503@server (orig r1242): ryan | 2006-03-10 02:06:12 -0800

r1292@rei: lfs | 2006-03-07 20:00:23 +1100
gcc build script updates for gcc-4.1.0


  • Property mode set to 100755
File size: 8.8 KB
Line 
1#!/bin/bash
2
3# cross-lfs target gcc build
4# --------------------------
5# $LastChangedBy$
6# $LastChangedDate$
7# $LastChangedRevision$
8# $HeadURL$
9#
10
11cd ${SRC}
12
13LOG="gcc-target.log"
14
15set_libdirname
16setup_multiarch
17
18if [ "${USE_SYSROOT}" = "Y" ]; then
19 BUILD_PREFIX=/usr
20 INSTALL_PREFIX="${LFS}${BUILD_PREFIX}"
21 INSTALL_OPTIONS="DESTDIR=${LFS}"
22else
23 BUILD_PREFIX=${TGT_TOOLS}
24 INSTALL_PREFIX="${TGT_TOOLS}"
25 INSTALL_OPTIONS=""
26fi
27
28if [ ! "${libdirname}" = "lib" ]; then
29 extra_conf="${extra_conf} --libdir=${BUILD_PREFIX}/${libdirname}"
30fi
31
32if [ "Y" = "${MULTIARCH}" ]; then
33 vendor_os=`echo ${TARGET} | sed 's@\([^-]*\)-\(.*\)@\2@'`
34 case ${TGT_ARCH} in
35 x86_64 )
36 TARGET=x86_64-${vendor_os}
37 ;;
38 sparc64* )
39 TARGET=sparc64-${vendor_os}
40 ;;
41 sparc* )
42 TARGET=sparc64-${vendor_os}
43 ;;
44 powerpc* | ppc* )
45 TARGET=powerpc64-${vendor_os}
46 ;;
47 s390* )
48 TARGET=s390x-${vendor_os}
49 ;;
50 mips*el* )
51 TARGET=mips64el-${vendor_os}
52 ;;
53 * )
54 # TODO: add some error messages etc
55 barf
56 ;;
57 esac
58else
59 # If we are not bi-arch, disable multilib
60 extra_conf="${extra_conf} --enable-multilib=no"
61
62 # HACK: this sets abi to n32 with mips... this should be handled
63 # by the multiarch funcs somehow... and set according to DEFAULTENV
64 case ${TGT_ARCH} in
65 mips* )
66 extra_conf="${extra_conf} --with-abi=${DEFAULTENV}"
67 ;;
68 esac
69fi
70
71# if target has no floating point unit, use soft float
72if [ "${WITHOUT_FPU}" = "Y" ]; then
73 extra_conf="${extra_conf} --with-float=soft"
74fi
75
76unpack_tarball gcc-${GCC_VER}
77
78#3.0 20030427
79# Cannot trust ${GCC_VER} to supply us with the correct
80# gcc version (especially if cvs).
81# Grab it straight from version.c
82cd ${SRC}/${PKGDIR}
83target_gcc_ver=`grep version_string gcc/version.c | \
84 sed 's@.* = \(\|"\)\([0-9.]*\).*@\2@g'`
85# As of gcc4, the above doesn't cut it... check gcc/BASE-VER
86if [ -z "${target_gcc_ver}" -a -f gcc/BASE-VER ]; then
87 target_gcc_ver=`cat gcc/BASE-VER`
88fi
89
90# Apply linkonce patch for gcc (should be fixed come gcc 3.4.4)
91cd ${SRC}/${PKGDIR}
92case ${target_gcc_ver} in
93 3.4.3 )
94 apply_patch gcc-3.4.3-linkonce-1
95 apply_patch gcc-3.4.0-arm-bigendian
96 apply_patch gcc-3.4.0-arm-nolibfloat
97 apply_patch gcc-3.4.0-arm-lib1asm
98 apply_patch gcc-3.4.3-clean_exec_and_lib_search_paths_when_cross-1
99 ;;
100 4.0.0 )
101 apply_patch gcc-4.0.0-fix_tree_optimisation_PR21173
102 apply_patch gcc-4.0.0-reload_check_uninitialized_pseudos_PR20973
103 apply_patch gcc-4.0.0-clean_exec_and_lib_search_paths_when_cross-1
104 ;;
105 4.0.* | 4.1.* )
106 apply_patch gcc-4.0.0-clean_exec_and_lib_search_paths_when_cross-1
107 ;;
108esac
109
110# if we are using gcc-3.4x, set libexecdir to */${libdirname}
111case ${target_gcc_ver} in
112 3.4* | 4.* )
113 extra_conf="${extra_conf} --libexecdir=${BUILD_PREFIX}/${libdirname}"
114 ;;
115esac
116
117# HACK: should at least check if any of these are set first
118ARCH_CFLAGS="${TGT_CFLAGS} ${ARCH_CFLAGS}"
119
120# if target is same as build host, adjust build slightly to avoid running
121# configure checks which we cannot run
122if [ "${TARGET}" = "${BUILD}" ]; then
123 BUILD=`echo ${BUILD} | sed 's@\([_a-zA-Z0-9]*\)\(-[_a-zA-Z0-9]*\)\(.*\)@\1\2x\3@'`
124fi
125
126if [ ! "${USE_SYSROOT}" = "Y" ]; then
127 # LFS style build
128 #----------------
129
130 # source functions for required gcc modifications
131 . ${SCRIPTS}/funcs/cross_gcc-funcs.sh
132
133 # Alter the generated specs file to
134 # o set dynamic linker to be under ${TGT_TOOLS}/lib{,32,64}
135 # o set startfile_prefix_spec so we search for startfiles
136 # under ${TGT_TOOLS}/lib/lib{,32,64}
137 gcc_specs_mod
138
139 # We need to stop cpp using /usr/include as the standard include directory.
140 # This is defined in gcc/cppdefault.c using STANDARD_INCLUDE_DIR
141 cpp_undef_standard_include_dir
142
143 # We need to override SYSTEM_HEADER_DIR so fixincludes only fixes
144 # headers under ${TGT_TOOLS}
145 fixincludes_set_native_system_header_dir
146fi
147
148# HACKS
149#-------
150# This here is a hack. mklibgcc runs the created xgcc for determining
151# the multilib dirs and multilib os dirs. Only problem here is we are
152# cross building a native compiler so we cannot actually run xgcc.
153# We get around this by substituting our cross-compiler here for xgcc,
154# by rights it should have the same specs and produce the expected results
155#
156# NOTE: with gcc-4.1 onwards we can just set GCC_FOR_TARGET to our cross-compiler
157# and be done with the shenannigans
158
159extra_makeopts=""
160case ${target_gcc_ver} in
161 4.[1-9].* )
162 extra_makeopts="${extra_makeopts} GCC_FOR_TARGET=${HST_TOOLS}/bin/${TARGET}-gcc"
163 ;;
164 * )
165 cd ${SRC}/${PKGDIR}/gcc
166 test -f mklibgcc.in-ORIG ||
167 mv mklibgcc.in mklibgcc.in-ORIG
168
169 sed "s@\./xgcc@${HST_TOOLS}/bin/${TARGET}-gcc@g" \
170 mklibgcc.in-ORIG > mklibgcc.in
171
172 # A similar problem exists when setting MULTILIBS on the environment
173 # for the mklibgcc script for generation of libgcc.mk .
174 # Here we will force it to use our cross-compiler to produce the results
175 # of gcc --print-multi-lib
176 sed -i "/MULTILIBS/s@\$(GCC_FOR_TARGET)@${HST_TOOLS}/bin/${TARGET}-gcc@g" \
177 Makefile.in
178 ;;
179esac
180
181# When cross-building a target native compiler we run into big issues
182# when determining assembler and linker features required for tls support,
183# ( not to mention which nm, objdump et al to use ) during the configures
184# triggered by make.
185#
186# Gcc's configury does not take into account the fact that when cross
187# building the target native compiler we are _still_ actually cross-compiling.
188# As far as it is concerned during the final configure fragment host = target,
189# it doesn't check whether host = build.
190#
191# It then performs its checks for binutils components as if this was a standard
192# host native build.
193#
194# If a target native binutils was installed before attempting to build gcc
195# it will try to use the created ld, as etc under ${TGT_TOOLS}
196# This obviously will not work, they will not run on the host.
197#
198# If the target native binutils hasn't been built yet it will use the
199# as ld et al from the _build_ host.
200# This quite frankly sucks rocks.
201#
202# The following patch fixes this behaviour, enforcing usage of our
203# cross-tools for configure checks if host = target and host != build
204#
205# NOTE: 20050507 This doesn't appear to be necessary for gcc 4.x :-)
206# This of course will have to be checked thoroughly...
207
208# TODO: Add patches for gcc-3.3 series as well
209cd ${SRC}/${PKGDIR}
210case ${target_gcc_ver} in
211 3.4* )
212 apply_patch gcc-3.4.1-fix_configure_for_target_native
213 ;;
214 4.* )
215 # set AS_FOR_TARGET and LD_FOR_TARGET so these are used for feature checks...
216 extra_makeopts="${extra_makeopts} AS_FOR_TARGET=${HST_TOOLS}/bin/${TARGET}-as"
217 extra_makeopts="${extra_makeopts} LD_FOR_TARGET=${HST_TOOLS}/bin/${TARGET}-ld"
218 ;;
219esac
220#
221# End HACKS
222
223test -d ${SRC}/gcc-${GCC_VER}-target &&
224 rm -rf ${SRC}/gcc-${GCC_VER}-target
225
226mkdir -p ${SRC}/gcc-${GCC_VER}-target &&
227cd ${SRC}/gcc-${GCC_VER}-target &&
228
229max_log_init Gcc ${GCC_VER} cross-pt2 ${CONFLOGS} ${LOG}
230#CONFIG_SHELL=/bin/bash \
231CFLAGS="-O2 -pipe" \
232CXXFLAGS="-O2 -pipe" \
233CC="${TARGET}-gcc ${ARCH_CFLAGS}" \
234../${PKGDIR}/configure --prefix=${BUILD_PREFIX} \
235 --build=${BUILD} --host=${TARGET} --target=${TARGET} \
236 --enable-languages=c,c++ --enable-__cxa_atexit \
237 --enable-c99 --enable-long-long --enable-threads=posix \
238 --disable-nls --enable-shared ${extra_conf} \
239 >> ${LOGFILE} 2>&1 &&
240echo " o Configure OK" || barf
241# --enable-languages=c,c++,f77,objc,ada,java,pascal,treelang --enable-__cxa_atexit \
242# --enable-version-specific-runtime-libs \
243
244min_log_init ${BUILDLOGS} &&
245make ${PMFLAGS} BOOT_LDFLAGS="-s" BOOT_CFLAGS="-O2 ${HOST_CFLAGS} -pipe" \
246 STAGE1_CFLAGS="-O2 ${HOST_CFLAGS} -pipe" ${extra_makeopts} all \
247 >> ${LOGFILE} 2>&1 &&
248echo " o Build OK" || barf
249
250min_log_init ${INSTLOGS} &&
251make ${INSTALL_OPTIONS} install \
252 >> ${LOGFILE} 2>&1 &&
253echo " o Install OK" || barf
254
255if [ ! "${USE_SYSROOT}" = "Y" ]; then
256 # Prep new root for target native glibc build
257 libdirs="${libdirname}"
258 if [ "Y" = "${MULTIARCH}" ]; then libdirs="lib lib32 lib64" ; fi
259 for dir in ${libdirs} ; do
260 if [ -d ${TGT_TOOLS}/${dir} ]; then
261 test -d ${LFS}/usr/${dir} || mkdir -p ${LFS}/usr/${dir}
262 ln -sf ../..${TGT_TOOLS}/${dir}/libgcc_s.so.1 \
263 ${LFS}/usr/${dir}/libgcc_s.so.1
264 test -f ${TGT_TOOLS}/${dir}/libgcc_s.so &&
265 ln -sf libgcc_s.so.1 ${LFS}/usr/${dir}/libgcc_s.so
266 test -f ${TGT_TOOLS}/${dir}/libgcc_s_32.so &&
267 ln -sf libgcc_s.so.1 ${LFS}/usr/${dir}/libgcc_s_32.so
268 test -f ${TGT_TOOLS}/${dir}/libgcc_s_64.so &&
269 ln -sf libgcc_s.so.1 ${LFS}/usr/${dir}/libgcc_s_64.so
270 fi
271 done
272fi
273
274test -L ${INSTALL_PREFIX}/bin/cc || ln -s gcc ${INSTALL_PREFIX}/bin/cc
275
Note: See TracBrowser for help on using the repository browser.