#!/bin/bash

# cross-lfs cross-gcc final build
# -------------------------------
# $LastChangedBy$
# $LastChangedDate$
# $LastChangedRevision$
# $HeadURL$
#
### GCC ( shared ) ###

cd ${SRC}

LOG="gcc-cross-final.log"

# we cannot assume what the default env for the the host system is,
# so we just set libdirname to "lib"
libdirname="lib"

#set_libdirname
#setup_multiarch
#
#if [ ! "${libdirname}" = "lib" ]; then
#   extra_conf="--libdir=${HST_TOOLS}/${libdirname}"
#fi

if [ "Y" = "${MULTIARCH}" ]; then
   vendor_os=`echo ${TARGET} | sed 's@\([^-]*\)-\(.*\)@\2@'`
   case ${TGT_ARCH} in
      x86_64 )
      ;;
      sparc* )
         TARGET=sparc64-${vendor_os}
      ;;
      powerpc* | ppc* )
         TARGET=powerpc64-${vendor_os}
      ;;
      s390* )
         TARGET=s390x-${vendor_os}
      ;;
      mips*el* )
         TARGET=mips64el-${vendor_os}
      ;;
      * )
         # TODO: add some error messages etc
         barf
      ;;
   esac

else
   # If we are not multi-arch, disable multilib
   extra_conf="${extra_conf} --enable-multilib=no"

   # HACK: this sets abi to n32 with mips... this should be handled
   # by the multiarch funcs somehow... and set according to DEFAULTENV
   case ${TGT_ARCH} in
      mips* )
         extra_conf="${extra_conf} --with-abi=${DEFAULTENV}"
      ;;
   esac
fi

# if target is same as build host, adjust host slightly to
# trick configure so we do not produce native tools
if [ "${TARGET}" = "${BUILD}" ]; then
   althost=`echo ${BUILD} | sed 's@\([_a-zA-Z0-9]*\)\(-[_a-zA-Z0-9]*\)\(.*\)@\1\2x\3@'`
   extra_conf="--host=${althost} ${extra_conf}"
fi

# if target has no floating point unit, use soft float
if [ "${WITHOUT_FPU}" = "Y" ]; then
   extra_conf="${extra_conf} --with-float=soft"
fi

unpack_tarball gcc-${GCC_VER}

#3.0 20030427
# Cannot trust ${GCC_VER} to supply us with the correct
# gcc version (especially if cvs).
# Grab it straight from version.c
cd ${SRC}/${PKGDIR}
target_gcc_ver=`grep version_string gcc/version.c | \
                sed 's@.* = \(\|"\)\([0-9.]*\).*@\2@g'`
# As of gcc4, the above doesn't cut it... check gcc/BASE-VER
if [ -z "${target_gcc_ver}" -a -f gcc/BASE-VER ]; then
   target_gcc_ver=`cat gcc/BASE-VER`
fi

# Apply linkonce patch for gcc (should be fixed come gcc 3.4.4)
cd ${SRC}/${PKGDIR}
case ${target_gcc_ver} in
   3.4.3 )
      apply_patch gcc-3.4.3-linkonce-1
      apply_patch gcc-3.4.0-arm-bigendian
      apply_patch gcc-3.4.0-arm-nolibfloat
      apply_patch gcc-3.4.0-arm-lib1asm
      apply_patch gcc-3.4.3-clean_exec_and_lib_search_paths_when_cross-1
   ;;
   4.0.0 )
      apply_patch gcc-4.0.0-fix_tree_optimisation_PR21173
      apply_patch gcc-4.0.0-reload_check_uninitialized_pseudos_PR20973
      apply_patch gcc-4.0.0-clean_exec_and_lib_search_paths_when_cross-1
   ;;
   4.0.* | 4.1.* )
      apply_patch gcc-4.0.0-clean_exec_and_lib_search_paths_when_cross-1
   ;;
esac

# if we are using gcc-3.4x, set libexecdir to */${libdirname}
case ${target_gcc_ver} in
   3.4* | 4.* )
      extra_conf="${extra_conf} --libexecdir=${HST_TOOLS}/${libdirname}"
   ;;
esac

if [ "${USE_SYSROOT}" = "Y" ]; then
   extra_conf="${extra_conf} --with-sysroot=${LFS}"
else
   # LFS style build
   #----------------

   # source functions for required gcc modifications
   . ${SCRIPTS}/funcs/cross_gcc-funcs.sh

   # Alter the generated specs file to 
   #  o set dynamic linker to be under ${TGT_TOOLS}/lib{,32,64}
   #  o set startfile_prefix_spec so we search for startfiles
   #    under ${TGT_TOOLS}/lib/lib{,32,64}
   gcc_specs_mod

   # Set cpp's default include search path, and the header search path 
   # used by fixincludes to be ${TGT_TOOLS}/include
   cpp_set_cross_system_header_dir

   # fix configure so that shared libgcc gets built against the correct
   # startfiles if the user sets ${TGT_TOOLS} = ${HOST_TOOLS}/${TARGET}
   configure_fix_flags_for_target
fi

test -d ${SRC}/gcc-${GCC_VER}-cross-final &&
   rm -rf ${SRC}/gcc-${GCC_VER}-cross-final

mkdir -p ${SRC}/gcc-${GCC_VER}-cross-final &&
cd ${SRC}/gcc-${GCC_VER}-cross-final &&

# NOTE:
# Some errors occur on solaris where bash syntax is used with a
# standard /bin/sh ( ie: expecting $(command) to be evaluated )
# To avoid this issue we override make's default shell with
# /bin/bash
# This is done via passing CONFIG_SHELL=/bin/bash to
# configure, which uses this when it specifies SHELL in
# the Makefiles.

max_log_init Gcc ${GCC_VER} cross-pt2 ${CONFLOGS} ${LOG}
#CONFIG_SHELL=/bin/bash \
CFLAGS="-O2 ${HOST_CFLAGS} -pipe" \
../${PKGDIR}/configure --prefix=${HST_TOOLS} \
   --target=${TARGET} ${extra_conf} --with-local-prefix=${TGT_TOOLS} \
   --enable-languages=c,c++ --enable-__cxa_atexit \
   --enable-c99 --enable-long-long --enable-threads=posix \
   --disable-nls --enable-shared \
   >> ${LOGFILE} 2>&1 &&
echo " o Configure OK" || barf
#   --enable-languages=c,c++,f77,objc,ada,java,pascal,treelang --enable-__cxa_atexit \

min_log_init ${BUILDLOGS} &&
#make ${PMFLAGS} BOOT_CFLAGS="-O2 ${HOST_CFLAGS} -pipe" \
#   STAGE1_CFLAGS="-O2 ${HOST_CFLAGS} -pipe" all \
make ${PMFLAGS} \
   CFLAGS_FOR_TARGET="-O2 -pipe ${TGT_CFLAGS}" \
   CXXFLAGS_FOR_TARGET="-O2 -pipe ${TGT_CFLAGS}" \
   >> ${LOGFILE} 2>&1 &&
echo " o Build OK" || barf

min_log_init ${INSTLOGS} &&
make install \
   >> ${LOGFILE} 2>&1 &&
echo " o Install OK" || barf