source: scripts/patches/linux-2.6.11-rc4-enable_dvico_dvb.patch@ 9456aee

diff -ru linux-2.6.11-rc4.clean/drivers/media/video/cx88/cx88-cards.c linux-2.6.11-rc4/drivers/media/video/cx88/cx88-cards.c
--- linux-2.6.11-rc4.clean/drivers/media/video/cx88/cx88-cards.c        2005-02-13 13:07:18.000000000 +1000
+++ linux-2.6.11-rc4/drivers/media/video/cx88/cx88-cards.c      2005-02-15 08:15:47.000000000 +1000
@@ -27,7 +27,12 @@
 #include <linux/delay.h>
 
 #if defined(CONFIG_VIDEO_CX88_DVB) || defined(CONFIG_VIDEO_CX88_DVB_MODULE)
-# define WITH_DVB 1
+/*
+ * The Hauppauge and Conexant CX22702 based DVB-only cards enabled by this 
+ * are currently broken.
+ *
+ * # define WITH_DVB 1
+ */
 #endif
 
 #include "cx88.h"
@@ -840,12 +845,14 @@
                leadtek_eeprom(core,eeprom);
                break;
        case CX88_BOARD_DVICO_FUSIONHDTV_DVB_T1:
-               /* Tuner reset is hooked to  the tuner out of reset */
+       case CX88_BOARD_DVICO_FUSIONHDTV_DVB_T_PLUS:
+               /* GPIO0:0 is hooked to mt352 reset pin */
                cx_set(MO_GP0_IO, 0x00000101);
                cx_clear(MO_GP0_IO, 0x00000001);
                msleep(1);
                cx_set(MO_GP0_IO, 0x00000101);
                break;
+#if 0
 #ifdef WITH_DVB
        case CX88_BOARD_HAUPPAUGE_DVB_T1:
                if (0 == core->i2c_rc)
@@ -858,6 +865,13 @@
                core->demod_addr = 0x43;
                break;
 #endif
+#else
+       case CX88_BOARD_HAUPPAUGE_DVB_T1:
+       case CX88_BOARD_CONEXANT_DVB_T1:
+               printk(KERN_NOTICE "Hauppauge and Conexant DVB-T cards not supported "
+                      "in this release\n");
+               break;
+#endif
        }
        if (cx88_boards[core->board].radio.type == CX88_RADIO)
                core->has_radio = 1;
diff -ru linux-2.6.11-rc4.clean/drivers/media/video/cx88/cx88-dvb.c linux-2.6.11-rc4/drivers/media/video/cx88/cx88-dvb.c
--- linux-2.6.11-rc4.clean/drivers/media/video/cx88/cx88-dvb.c  2005-02-13 13:06:55.000000000 +1000
+++ linux-2.6.11-rc4/drivers/media/video/cx88/cx88-dvb.c        2005-02-15 08:10:48.000000000 +1000
@@ -187,10 +187,15 @@
        switch (dev->core->board) {
        case CX88_BOARD_HAUPPAUGE_DVB_T1:
        case CX88_BOARD_CONEXANT_DVB_T1:
+#if 0
                dev->dvb.frontend = cx22702_create(&dev->core->i2c_adap,
                                                   dev->core->pll_addr,
                                                   dev->core->pll_type,
                                                   dev->core->demod_addr);
+#else
+               printk(KERN_NOTICE "Hauppauge and Conexant DVB-T cards not supported "
+                      "in this release\n");
+#endif
                break;
        case CX88_BOARD_DVICO_FUSIONHDTV_DVB_T1:
                dev->dvb.frontend = mt352_attach(&dvico_fusionhdtv_dvbt1,
@@ -222,7 +227,7 @@
                sizeof(dev->dvb.frontend->ops->info.name));
 
        /* register everything */
-       return videobuf_dvb_register(&dev->dvb);
+       return videobuf_dvb_register(&dev->dvb, THIS_MODULE, dev);
 }
 
 /* ----------------------------------------------------------- */
diff -ru linux-2.6.11-rc4.clean/drivers/media/video/Kconfig linux-2.6.11-rc4/drivers/media/video/Kconfig
--- linux-2.6.11-rc4.clean/drivers/media/video/Kconfig  2005-02-13 13:07:40.000000000 +1000
+++ linux-2.6.11-rc4/drivers/media/video/Kconfig        2005-02-15 08:20:46.000000000 +1000
@@ -305,7 +305,7 @@
 
 config VIDEO_CX88
        tristate "Conexant 2388x (bt878 successor) support"
-       depends on VIDEO_DEV && PCI && EXPERIMENTAL
+       depends on VIDEO_DEV && PCI && I2C && EXPERIMENTAL
        select I2C_ALGOBIT
        select VIDEO_BTCX
        select VIDEO_BUF
@@ -319,12 +319,15 @@
 
 config VIDEO_CX88_DVB
        tristate "DVB Support for cx2388x based TV cards"
-       depends on VIDEO_CX88 && DVB_CORE && BROKEN
+       depends on VIDEO_CX88 && DVB_CORE
        select VIDEO_BUF_DVB
+       select DVB_MT352
        ---help---
          This adds support for DVB cards based on the
          Connexant 2388x chip.
 
+         As of this release only the DVICO DVB-T cards are supported.
+
 config VIDEO_OVCAMCHIP
        tristate "OmniVision Camera Chip support"
        depends on VIDEO_DEV && I2C