Submitted By: Jonathan Norman <jonathan at bluesquarelinux.co.uk >
Date: 2011-05-18
Initial Package Version: 1.22
Origin: Debian
Upstream Status: Unknown
Description: This patch adds a man page for tar generated by the perl script
             from debian.

Rediffed: Against 1.26 by Jonathan Norman 2011-05-18

diff -Naur tar-1.26.orig/doc/Makefile.am tar-1.26/doc/Makefile.am
--- tar-1.26.orig/doc/Makefile.am	2011-05-18 17:55:21.025857021 +0000
+++ tar-1.26/doc/Makefile.am	2011-05-18 17:55:36.872098438 +0000
@@ -17,6 +17,7 @@
 ## along with this program; if not, write to the Free Software Foundation,
 ## Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
 
+man_MANS = tar.1
 info_TEXINFOS = tar.texi
 tar_TEXINFOS = \
  dumpdir.texi\
diff -Naur tar-1.26.orig/doc/Makefile.in tar-1.26/doc/Makefile.in
--- tar-1.26.orig/doc/Makefile.in	2011-05-18 17:55:21.029856577 +0000
+++ tar-1.26/doc/Makefile.in	2011-05-18 17:55:36.872098438 +0000
@@ -172,7 +172,7 @@
 MAKEINFOHTML = $(MAKEINFO) --html
 AM_MAKEINFOHTMLFLAGS = $(AM_MAKEINFOFLAGS)
 DVIPS = dvips
-am__installdirs = "$(DESTDIR)$(infodir)"
+am__installdirs = "$(DESTDIR)$(infodir)" "$(DESTDIR)$(man1dir)"
 am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
 am__vpath_adj = case $$p in \
     $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
@@ -194,6 +194,9 @@
 am__base_list = \
   sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
   sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
+man1dir = $(mandir)/man1
+NROFF = nroff
+MANS = $(man_MANS)
 DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
 pkglibexecdir = @pkglibexecdir@
 ACLOCAL = @ACLOCAL@
@@ -956,6 +959,7 @@
 top_build_prefix = @top_build_prefix@
 top_builddir = @top_builddir@
 top_srcdir = @top_srcdir@
+man_MANS = tar.1
 info_TEXINFOS = tar.texi
 tar_TEXINFOS = \
  dumpdir.texi\
@@ -1178,6 +1182,44 @@
 	  echo " rm -f $$i $$i-[0-9] $$i-[0-9][0-9] $$i_i[0-9] $$i_i[0-9][0-9]"; \
 	  rm -f $$i $$i-[0-9] $$i-[0-9][0-9] $$i_i[0-9] $$i_i[0-9][0-9]; \
 	done
+install-man1: $(man_MANS)
+	@$(NORMAL_INSTALL)
+	test -z "$(man1dir)" || $(MKDIR_P) "$(DESTDIR)$(man1dir)"
+	@list=''; test -n "$(man1dir)" || exit 0; \
+	{ for i in $$list; do echo "$$i"; done; \
+	l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \
+	  sed -n '/\.1[a-z]*$$/p'; \
+	} | while read p; do \
+	  if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
+	  echo "$$d$$p"; echo "$$p"; \
+	done | \
+	sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
+	      -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
+	sed 'N;N;s,\n, ,g' | { \
+	list=; while read file base inst; do \
+	  if test "$$base" = "$$inst"; then list="$$list $$file"; else \
+	    echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man1dir)/$$inst'"; \
+	    $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man1dir)/$$inst" || exit $$?; \
+	  fi; \
+	done; \
+	for i in $$list; do echo "$$i"; done | $(am__base_list) | \
+	while read files; do \
+	  test -z "$$files" || { \
+	    echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man1dir)'"; \
+	    $(INSTALL_DATA) $$files "$(DESTDIR)$(man1dir)" || exit $$?; }; \
+	done; }
+
+uninstall-man1:
+	@$(NORMAL_UNINSTALL)
+	@list=''; test -n "$(man1dir)" || exit 0; \
+	files=`{ for i in $$list; do echo "$$i"; done; \
+	l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \
+	  sed -n '/\.1[a-z]*$$/p'; \
+	} | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
+	      -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
+	test -z "$$files" || { \
+	  echo " ( cd '$(DESTDIR)$(man1dir)' && rm -f" $$files ")"; \
+	  cd "$(DESTDIR)$(man1dir)" && rm -f $$files; }
 tags: TAGS
 TAGS:
 
@@ -1186,6 +1228,19 @@
 
 
 distdir: $(DISTFILES)
+	@list='$(MANS)'; if test -n "$$list"; then \
+	  list=`for p in $$list; do \
+	    if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
+	    if test -f "$$d$$p"; then echo "$$d$$p"; else :; fi; done`; \
+	  if test -n "$$list" && \
+	    grep 'ab help2man is required to generate this page' $$list >/dev/null; then \
+	    echo "error: found man pages containing the \`missing help2man' replacement text:" >&2; \
+	    grep -l 'ab help2man is required to generate this page' $$list | sed 's/^/         /' >&2; \
+	    echo "       to fix them, install help2man, remove and regenerate the man pages;" >&2; \
+	    echo "       typically \`make maintainer-clean' will remove them" >&2; \
+	    exit 1; \
+	  else :; fi; \
+	else :; fi
 	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
 	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
 	list='$(DISTFILES)'; \
@@ -1220,9 +1275,9 @@
 	  dist-info
 check-am: all-am
 check: check-am
-all-am: Makefile $(INFO_DEPS)
+all-am: Makefile $(INFO_DEPS) $(MANS)
 installdirs:
-	for dir in "$(DESTDIR)$(infodir)"; do \
+	for dir in "$(DESTDIR)$(infodir)" "$(DESTDIR)$(man1dir)"; do \
 	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
 	done
 install: install-am
@@ -1270,7 +1325,7 @@
 
 info-am: $(INFO_DEPS)
 
-install-data-am: install-info-am
+install-data-am: install-info-am install-man
 
 install-dvi: install-dvi-am
 
@@ -1344,7 +1399,7 @@
 	    install-info --info-dir="$(DESTDIR)$(infodir)" "$(DESTDIR)$(infodir)/$$relfile" || :;\
 	  done; \
 	else : ; fi
-install-man:
+install-man: install-man1
 
 install-pdf: install-pdf-am
 
@@ -1392,7 +1447,9 @@
 ps-am: $(PSS)
 
 uninstall-am: uninstall-dvi-am uninstall-html-am uninstall-info-am \
-	uninstall-pdf-am uninstall-ps-am
+	uninstall-man uninstall-pdf-am uninstall-ps-am
+
+uninstall-man: uninstall-man1
 
 .MAKE: install-am install-strip
 
@@ -1401,14 +1458,15 @@
 	dvi-am html html-am info info-am install install-am \
 	install-data install-data-am install-dvi install-dvi-am \
 	install-exec install-exec-am install-html install-html-am \
-	install-info install-info-am install-man install-pdf \
-	install-pdf-am install-ps install-ps-am install-strip \
-	installcheck installcheck-am installdirs maintainer-clean \
-	maintainer-clean-aminfo maintainer-clean-generic \
-	maintainer-clean-vti mostlyclean mostlyclean-aminfo \
-	mostlyclean-generic mostlyclean-vti pdf pdf-am ps ps-am \
-	uninstall uninstall-am uninstall-dvi-am uninstall-html-am \
-	uninstall-info-am uninstall-pdf-am uninstall-ps-am
+	install-info install-info-am install-man install-man1 \
+	install-pdf install-pdf-am install-ps install-ps-am \
+	install-strip installcheck installcheck-am installdirs \
+	maintainer-clean maintainer-clean-aminfo \
+	maintainer-clean-generic maintainer-clean-vti mostlyclean \
+	mostlyclean-aminfo mostlyclean-generic mostlyclean-vti pdf \
+	pdf-am ps ps-am uninstall uninstall-am uninstall-dvi-am \
+	uninstall-html-am uninstall-info-am uninstall-man \
+	uninstall-man1 uninstall-pdf-am uninstall-ps-am
 
 
 header.texi: $(top_srcdir)/src/tar.h
diff -Naur tar-1.26.orig/doc/Makefile.in.orig tar-1.26/doc/Makefile.in.orig
--- tar-1.26.orig/doc/Makefile.in.orig	1970-01-01 00:00:00.000000000 +0000
+++ tar-1.26/doc/Makefile.in.orig	2011-03-12 09:50:09.000000000 +0000
@@ -0,0 +1,1518 @@
+# Makefile.in generated by automake 1.11.1 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
+# 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
+# Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+
+# Makefile for GNU tar documentation.
+
+# Copyright (C) 1994, 1995, 1996, 1997, 1999, 2000, 2001, 2003, 2006,
+# 2007 Free Software Foundation, Inc.
+VPATH = @srcdir@
+pkgdatadir = $(datadir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+build_triplet = @build@
+host_triplet = @host@
+subdir = doc
+DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in \
+	$(srcdir)/stamp-vti $(srcdir)/version.texi $(tar_TEXINFOS)
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/m4/00gnulib.m4 \
+	$(top_srcdir)/m4/alloca.m4 $(top_srcdir)/m4/argmatch.m4 \
+	$(top_srcdir)/m4/argp.m4 $(top_srcdir)/m4/backupfile.m4 \
+	$(top_srcdir)/m4/bison.m4 $(top_srcdir)/m4/btowc.m4 \
+	$(top_srcdir)/m4/canonicalize.m4 \
+	$(top_srcdir)/m4/chdir-long.m4 $(top_srcdir)/m4/chown.m4 \
+	$(top_srcdir)/m4/clock_time.m4 $(top_srcdir)/m4/cloexec.m4 \
+	$(top_srcdir)/m4/close-stream.m4 $(top_srcdir)/m4/close.m4 \
+	$(top_srcdir)/m4/closeout.m4 $(top_srcdir)/m4/codeset.m4 \
+	$(top_srcdir)/m4/configmake.m4 $(top_srcdir)/m4/d-ino.m4 \
+	$(top_srcdir)/m4/dirent-safer.m4 $(top_srcdir)/m4/dirent_h.m4 \
+	$(top_srcdir)/m4/dirfd.m4 $(top_srcdir)/m4/dirname.m4 \
+	$(top_srcdir)/m4/double-slash-root.m4 $(top_srcdir)/m4/dup2.m4 \
+	$(top_srcdir)/m4/eealloc.m4 $(top_srcdir)/m4/environ.m4 \
+	$(top_srcdir)/m4/errno_h.m4 $(top_srcdir)/m4/error.m4 \
+	$(top_srcdir)/m4/exclude.m4 $(top_srcdir)/m4/extensions.m4 \
+	$(top_srcdir)/m4/fchdir.m4 $(top_srcdir)/m4/fclose.m4 \
+	$(top_srcdir)/m4/fcntl-o.m4 $(top_srcdir)/m4/fcntl.m4 \
+	$(top_srcdir)/m4/fcntl_h.m4 $(top_srcdir)/m4/fdopendir.m4 \
+	$(top_srcdir)/m4/fileblocks.m4 $(top_srcdir)/m4/filenamecat.m4 \
+	$(top_srcdir)/m4/float_h.m4 $(top_srcdir)/m4/fnmatch.m4 \
+	$(top_srcdir)/m4/fpending.m4 $(top_srcdir)/m4/fseeko.m4 \
+	$(top_srcdir)/m4/futimens.m4 \
+	$(top_srcdir)/m4/getcwd-abort-bug.m4 \
+	$(top_srcdir)/m4/getcwd-path-max.m4 $(top_srcdir)/m4/getcwd.m4 \
+	$(top_srcdir)/m4/getdelim.m4 $(top_srcdir)/m4/getdtablesize.m4 \
+	$(top_srcdir)/m4/getline.m4 $(top_srcdir)/m4/getopt.m4 \
+	$(top_srcdir)/m4/getpagesize.m4 $(top_srcdir)/m4/gettext.m4 \
+	$(top_srcdir)/m4/gettime.m4 $(top_srcdir)/m4/gettimeofday.m4 \
+	$(top_srcdir)/m4/glibc21.m4 $(top_srcdir)/m4/gnulib-common.m4 \
+	$(top_srcdir)/m4/gnulib-comp.m4 $(top_srcdir)/m4/hash.m4 \
+	$(top_srcdir)/m4/human.m4 $(top_srcdir)/m4/iconv.m4 \
+	$(top_srcdir)/m4/include_next.m4 $(top_srcdir)/m4/inline.m4 \
+	$(top_srcdir)/m4/intlmacosx.m4 $(top_srcdir)/m4/intmax_t.m4 \
+	$(top_srcdir)/m4/inttostr.m4 $(top_srcdir)/m4/inttypes-pri.m4 \
+	$(top_srcdir)/m4/inttypes.m4 $(top_srcdir)/m4/inttypes_h.m4 \
+	$(top_srcdir)/m4/iswblank.m4 $(top_srcdir)/m4/langinfo_h.m4 \
+	$(top_srcdir)/m4/lchown.m4 $(top_srcdir)/m4/lib-ld.m4 \
+	$(top_srcdir)/m4/lib-link.m4 $(top_srcdir)/m4/lib-prefix.m4 \
+	$(top_srcdir)/m4/libunistring-base.m4 \
+	$(top_srcdir)/m4/link-follow.m4 $(top_srcdir)/m4/link.m4 \
+	$(top_srcdir)/m4/linkat.m4 $(top_srcdir)/m4/localcharset.m4 \
+	$(top_srcdir)/m4/locale-fr.m4 $(top_srcdir)/m4/locale-ja.m4 \
+	$(top_srcdir)/m4/locale-zh.m4 $(top_srcdir)/m4/longlong.m4 \
+	$(top_srcdir)/m4/lseek.m4 $(top_srcdir)/m4/lstat.m4 \
+	$(top_srcdir)/m4/malloc.m4 $(top_srcdir)/m4/malloca.m4 \
+	$(top_srcdir)/m4/mbchar.m4 $(top_srcdir)/m4/mbiter.m4 \
+	$(top_srcdir)/m4/mbrtowc.m4 $(top_srcdir)/m4/mbsinit.m4 \
+	$(top_srcdir)/m4/mbsrtowcs.m4 $(top_srcdir)/m4/mbstate_t.m4 \
+	$(top_srcdir)/m4/mbtowc.m4 $(top_srcdir)/m4/memchr.m4 \
+	$(top_srcdir)/m4/mempcpy.m4 $(top_srcdir)/m4/memrchr.m4 \
+	$(top_srcdir)/m4/mkdir.m4 $(top_srcdir)/m4/mkdtemp.m4 \
+	$(top_srcdir)/m4/mkfifo.m4 $(top_srcdir)/m4/mkfifoat.m4 \
+	$(top_srcdir)/m4/mknod.m4 $(top_srcdir)/m4/mktime.m4 \
+	$(top_srcdir)/m4/mmap-anon.m4 $(top_srcdir)/m4/mode_t.m4 \
+	$(top_srcdir)/m4/modechange.m4 $(top_srcdir)/m4/multiarch.m4 \
+	$(top_srcdir)/m4/nl_langinfo.m4 $(top_srcdir)/m4/nls.m4 \
+	$(top_srcdir)/m4/open.m4 $(top_srcdir)/m4/openat.m4 \
+	$(top_srcdir)/m4/parse-datetime.m4 $(top_srcdir)/m4/pathmax.m4 \
+	$(top_srcdir)/m4/paxutils.m4 $(top_srcdir)/m4/po.m4 \
+	$(top_srcdir)/m4/printf.m4 $(top_srcdir)/m4/priv-set.m4 \
+	$(top_srcdir)/m4/progtest.m4 $(top_srcdir)/m4/quote.m4 \
+	$(top_srcdir)/m4/quotearg.m4 $(top_srcdir)/m4/rawmemchr.m4 \
+	$(top_srcdir)/m4/readlink.m4 $(top_srcdir)/m4/readlinkat.m4 \
+	$(top_srcdir)/m4/realloc.m4 $(top_srcdir)/m4/regex.m4 \
+	$(top_srcdir)/m4/rename.m4 $(top_srcdir)/m4/renameat.m4 \
+	$(top_srcdir)/m4/rmdir.m4 $(top_srcdir)/m4/rmt.m4 \
+	$(top_srcdir)/m4/rpmatch.m4 $(top_srcdir)/m4/rtapelib.m4 \
+	$(top_srcdir)/m4/safe-read.m4 $(top_srcdir)/m4/safe-write.m4 \
+	$(top_srcdir)/m4/save-cwd.m4 $(top_srcdir)/m4/savedir.m4 \
+	$(top_srcdir)/m4/setenv.m4 $(top_srcdir)/m4/size_max.m4 \
+	$(top_srcdir)/m4/sleep.m4 $(top_srcdir)/m4/snprintf.m4 \
+	$(top_srcdir)/m4/ssize_t.m4 $(top_srcdir)/m4/stat-time.m4 \
+	$(top_srcdir)/m4/stat.m4 $(top_srcdir)/m4/stdarg.m4 \
+	$(top_srcdir)/m4/stdbool.m4 $(top_srcdir)/m4/stddef_h.m4 \
+	$(top_srcdir)/m4/stdint.m4 $(top_srcdir)/m4/stdint_h.m4 \
+	$(top_srcdir)/m4/stdio_h.m4 $(top_srcdir)/m4/stdlib_h.m4 \
+	$(top_srcdir)/m4/stpcpy.m4 $(top_srcdir)/m4/strcase.m4 \
+	$(top_srcdir)/m4/strchrnul.m4 $(top_srcdir)/m4/strdup.m4 \
+	$(top_srcdir)/m4/strerror.m4 $(top_srcdir)/m4/string_h.m4 \
+	$(top_srcdir)/m4/strings_h.m4 $(top_srcdir)/m4/strndup.m4 \
+	$(top_srcdir)/m4/strnlen.m4 $(top_srcdir)/m4/strtoimax.m4 \
+	$(top_srcdir)/m4/strtol.m4 $(top_srcdir)/m4/strtoll.m4 \
+	$(top_srcdir)/m4/strtoul.m4 $(top_srcdir)/m4/strtoull.m4 \
+	$(top_srcdir)/m4/strtoumax.m4 $(top_srcdir)/m4/symlink.m4 \
+	$(top_srcdir)/m4/symlinkat.m4 $(top_srcdir)/m4/sys_stat_h.m4 \
+	$(top_srcdir)/m4/sys_time_h.m4 $(top_srcdir)/m4/sysexits.m4 \
+	$(top_srcdir)/m4/system.m4 $(top_srcdir)/m4/tempname.m4 \
+	$(top_srcdir)/m4/time_h.m4 $(top_srcdir)/m4/time_r.m4 \
+	$(top_srcdir)/m4/timespec.m4 $(top_srcdir)/m4/tm_gmtoff.m4 \
+	$(top_srcdir)/m4/unistd-safer.m4 $(top_srcdir)/m4/unistd_h.m4 \
+	$(top_srcdir)/m4/unlink.m4 $(top_srcdir)/m4/unlinkdir.m4 \
+	$(top_srcdir)/m4/unlocked-io.m4 $(top_srcdir)/m4/utimbuf.m4 \
+	$(top_srcdir)/m4/utimens.m4 $(top_srcdir)/m4/utimensat.m4 \
+	$(top_srcdir)/m4/utimes.m4 $(top_srcdir)/m4/vasnprintf.m4 \
+	$(top_srcdir)/m4/vasprintf.m4 $(top_srcdir)/m4/version-etc.m4 \
+	$(top_srcdir)/m4/vsnprintf.m4 $(top_srcdir)/m4/warn-on-use.m4 \
+	$(top_srcdir)/m4/wchar_h.m4 $(top_srcdir)/m4/wchar_t.m4 \
+	$(top_srcdir)/m4/wcrtomb.m4 $(top_srcdir)/m4/wctype_h.m4 \
+	$(top_srcdir)/m4/wcwidth.m4 $(top_srcdir)/m4/wint_t.m4 \
+	$(top_srcdir)/m4/write.m4 $(top_srcdir)/m4/xalloc.m4 \
+	$(top_srcdir)/m4/xgetcwd.m4 $(top_srcdir)/m4/xsize.m4 \
+	$(top_srcdir)/m4/xstrndup.m4 $(top_srcdir)/m4/xstrtol.m4 \
+	$(top_srcdir)/m4/xvasprintf.m4 $(top_srcdir)/acinclude.m4 \
+	$(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+	$(ACLOCAL_M4)
+mkinstalldirs = $(install_sh) -d
+CONFIG_HEADER = $(top_builddir)/config.h
+CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
+AM_V_GEN = $(am__v_GEN_$(V))
+am__v_GEN_ = $(am__v_GEN_$(AM_DEFAULT_VERBOSITY))
+am__v_GEN_0 = @echo "  GEN   " $@;
+AM_V_at = $(am__v_at_$(V))
+am__v_at_ = $(am__v_at_$(AM_DEFAULT_VERBOSITY))
+am__v_at_0 = @
+SOURCES =
+DIST_SOURCES =
+INFO_DEPS = $(srcdir)/tar.info
+TEXINFO_TEX = $(top_srcdir)/build-aux/texinfo.tex
+am__TEXINFO_TEX_DIR = $(top_srcdir)/build-aux
+DVIS = tar.dvi
+PDFS = tar.pdf
+PSS = tar.ps
+HTMLS = tar.html
+TEXINFOS = tar.texi
+TEXI2PDF = $(TEXI2DVI) --pdf --batch
+MAKEINFOHTML = $(MAKEINFO) --html
+AM_MAKEINFOHTMLFLAGS = $(AM_MAKEINFOFLAGS)
+DVIPS = dvips
+am__installdirs = "$(DESTDIR)$(infodir)"
+am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
+am__vpath_adj = case $$p in \
+    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
+    *) f=$$p;; \
+  esac;
+am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
+am__install_max = 40
+am__nobase_strip_setup = \
+  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
+am__nobase_strip = \
+  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
+am__nobase_list = $(am__nobase_strip_setup); \
+  for p in $$list; do echo "$$p $$p"; done | \
+  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
+  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
+    if (++n[$$2] == $(am__install_max)) \
+      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
+    END { for (dir in files) print dir, files[dir] }'
+am__base_list = \
+  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
+  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+pkglibexecdir = @pkglibexecdir@
+ACLOCAL = @ACLOCAL@
+ALLOCA = @ALLOCA@
+ALLOCA_H = @ALLOCA_H@
+AMTAR = @AMTAR@
+AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
+APPLE_UNIVERSAL_BUILD = @APPLE_UNIVERSAL_BUILD@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOM4TE = @AUTOM4TE@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+BACKUP_LIBEXEC_SCRIPTS = @BACKUP_LIBEXEC_SCRIPTS@
+BACKUP_SBIN_SCRIPTS = @BACKUP_SBIN_SCRIPTS@
+BACKUP_SED_COND = @BACKUP_SED_COND@
+BITSIZEOF_PTRDIFF_T = @BITSIZEOF_PTRDIFF_T@
+BITSIZEOF_SIG_ATOMIC_T = @BITSIZEOF_SIG_ATOMIC_T@
+BITSIZEOF_SIZE_T = @BITSIZEOF_SIZE_T@
+BITSIZEOF_WCHAR_T = @BITSIZEOF_WCHAR_T@
+BITSIZEOF_WINT_T = @BITSIZEOF_WINT_T@
+CC = @CC@
+CCDEPMODE = @CCDEPMODE@
+CFLAGS = @CFLAGS@
+CPP = @CPP@
+CPPFLAGS = @CPPFLAGS@
+CYGPATH_W = @CYGPATH_W@
+DEFAULT_ARCHIVE = @DEFAULT_ARCHIVE@
+DEFAULT_ARCHIVE_FORMAT = @DEFAULT_ARCHIVE_FORMAT@
+DEFAULT_BLOCKING = @DEFAULT_BLOCKING@
+DEFAULT_QUOTING_STYLE = @DEFAULT_QUOTING_STYLE@
+DEFAULT_RMT_COMMAND = @DEFAULT_RMT_COMMAND@
+DEFAULT_RMT_DIR = @DEFAULT_RMT_DIR@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+EGREP = @EGREP@
+EMULTIHOP_HIDDEN = @EMULTIHOP_HIDDEN@
+EMULTIHOP_VALUE = @EMULTIHOP_VALUE@
+ENOLINK_HIDDEN = @ENOLINK_HIDDEN@
+ENOLINK_VALUE = @ENOLINK_VALUE@
+EOVERFLOW_HIDDEN = @EOVERFLOW_HIDDEN@
+EOVERFLOW_VALUE = @EOVERFLOW_VALUE@
+ERRNO_H = @ERRNO_H@
+EXEEXT = @EXEEXT@
+FLOAT_H = @FLOAT_H@
+FNMATCH_H = @FNMATCH_H@
+GETOPT_H = @GETOPT_H@
+GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@
+GLIBC21 = @GLIBC21@
+GMSGFMT = @GMSGFMT@
+GMSGFMT_015 = @GMSGFMT_015@
+GNULIB_ALPHASORT = @GNULIB_ALPHASORT@
+GNULIB_ATOLL = @GNULIB_ATOLL@
+GNULIB_BTOWC = @GNULIB_BTOWC@
+GNULIB_CALLOC_POSIX = @GNULIB_CALLOC_POSIX@
+GNULIB_CANONICALIZE_FILE_NAME = @GNULIB_CANONICALIZE_FILE_NAME@
+GNULIB_CHOWN = @GNULIB_CHOWN@
+GNULIB_CLOSE = @GNULIB_CLOSE@
+GNULIB_DIRFD = @GNULIB_DIRFD@
+GNULIB_DPRINTF = @GNULIB_DPRINTF@
+GNULIB_DUP2 = @GNULIB_DUP2@
+GNULIB_DUP3 = @GNULIB_DUP3@
+GNULIB_ENVIRON = @GNULIB_ENVIRON@
+GNULIB_EUIDACCESS = @GNULIB_EUIDACCESS@
+GNULIB_FACCESSAT = @GNULIB_FACCESSAT@
+GNULIB_FCHDIR = @GNULIB_FCHDIR@
+GNULIB_FCHMODAT = @GNULIB_FCHMODAT@
+GNULIB_FCHOWNAT = @GNULIB_FCHOWNAT@
+GNULIB_FCLOSE = @GNULIB_FCLOSE@
+GNULIB_FCNTL = @GNULIB_FCNTL@
+GNULIB_FDOPENDIR = @GNULIB_FDOPENDIR@
+GNULIB_FFLUSH = @GNULIB_FFLUSH@
+GNULIB_FOPEN = @GNULIB_FOPEN@
+GNULIB_FPRINTF = @GNULIB_FPRINTF@
+GNULIB_FPRINTF_POSIX = @GNULIB_FPRINTF_POSIX@
+GNULIB_FPURGE = @GNULIB_FPURGE@
+GNULIB_FPUTC = @GNULIB_FPUTC@
+GNULIB_FPUTS = @GNULIB_FPUTS@
+GNULIB_FREOPEN = @GNULIB_FREOPEN@
+GNULIB_FSEEK = @GNULIB_FSEEK@
+GNULIB_FSEEKO = @GNULIB_FSEEKO@
+GNULIB_FSTATAT = @GNULIB_FSTATAT@
+GNULIB_FSYNC = @GNULIB_FSYNC@
+GNULIB_FTELL = @GNULIB_FTELL@
+GNULIB_FTELLO = @GNULIB_FTELLO@
+GNULIB_FTRUNCATE = @GNULIB_FTRUNCATE@
+GNULIB_FUTIMENS = @GNULIB_FUTIMENS@
+GNULIB_FWRITE = @GNULIB_FWRITE@
+GNULIB_GETCWD = @GNULIB_GETCWD@
+GNULIB_GETDELIM = @GNULIB_GETDELIM@
+GNULIB_GETDOMAINNAME = @GNULIB_GETDOMAINNAME@
+GNULIB_GETDTABLESIZE = @GNULIB_GETDTABLESIZE@
+GNULIB_GETGROUPS = @GNULIB_GETGROUPS@
+GNULIB_GETHOSTNAME = @GNULIB_GETHOSTNAME@
+GNULIB_GETLINE = @GNULIB_GETLINE@
+GNULIB_GETLOADAVG = @GNULIB_GETLOADAVG@
+GNULIB_GETLOGIN = @GNULIB_GETLOGIN@
+GNULIB_GETLOGIN_R = @GNULIB_GETLOGIN_R@
+GNULIB_GETPAGESIZE = @GNULIB_GETPAGESIZE@
+GNULIB_GETSUBOPT = @GNULIB_GETSUBOPT@
+GNULIB_GETTIMEOFDAY = @GNULIB_GETTIMEOFDAY@
+GNULIB_GETUSERSHELL = @GNULIB_GETUSERSHELL@
+GNULIB_GRANTPT = @GNULIB_GRANTPT@
+GNULIB_IMAXABS = @GNULIB_IMAXABS@
+GNULIB_IMAXDIV = @GNULIB_IMAXDIV@
+GNULIB_ISWBLANK = @GNULIB_ISWBLANK@
+GNULIB_ISWCTYPE = @GNULIB_ISWCTYPE@
+GNULIB_LCHMOD = @GNULIB_LCHMOD@
+GNULIB_LCHOWN = @GNULIB_LCHOWN@
+GNULIB_LINK = @GNULIB_LINK@
+GNULIB_LINKAT = @GNULIB_LINKAT@
+GNULIB_LSEEK = @GNULIB_LSEEK@
+GNULIB_LSTAT = @GNULIB_LSTAT@
+GNULIB_MALLOC_POSIX = @GNULIB_MALLOC_POSIX@
+GNULIB_MBRLEN = @GNULIB_MBRLEN@
+GNULIB_MBRTOWC = @GNULIB_MBRTOWC@
+GNULIB_MBSCASECMP = @GNULIB_MBSCASECMP@
+GNULIB_MBSCASESTR = @GNULIB_MBSCASESTR@
+GNULIB_MBSCHR = @GNULIB_MBSCHR@
+GNULIB_MBSCSPN = @GNULIB_MBSCSPN@
+GNULIB_MBSINIT = @GNULIB_MBSINIT@
+GNULIB_MBSLEN = @GNULIB_MBSLEN@
+GNULIB_MBSNCASECMP = @GNULIB_MBSNCASECMP@
+GNULIB_MBSNLEN = @GNULIB_MBSNLEN@
+GNULIB_MBSNRTOWCS = @GNULIB_MBSNRTOWCS@
+GNULIB_MBSPBRK = @GNULIB_MBSPBRK@
+GNULIB_MBSPCASECMP = @GNULIB_MBSPCASECMP@
+GNULIB_MBSRCHR = @GNULIB_MBSRCHR@
+GNULIB_MBSRTOWCS = @GNULIB_MBSRTOWCS@
+GNULIB_MBSSEP = @GNULIB_MBSSEP@
+GNULIB_MBSSPN = @GNULIB_MBSSPN@
+GNULIB_MBSSTR = @GNULIB_MBSSTR@
+GNULIB_MBSTOK_R = @GNULIB_MBSTOK_R@
+GNULIB_MBTOWC = @GNULIB_MBTOWC@
+GNULIB_MEMCHR = @GNULIB_MEMCHR@
+GNULIB_MEMMEM = @GNULIB_MEMMEM@
+GNULIB_MEMPCPY = @GNULIB_MEMPCPY@
+GNULIB_MEMRCHR = @GNULIB_MEMRCHR@
+GNULIB_MKDIRAT = @GNULIB_MKDIRAT@
+GNULIB_MKDTEMP = @GNULIB_MKDTEMP@
+GNULIB_MKFIFO = @GNULIB_MKFIFO@
+GNULIB_MKFIFOAT = @GNULIB_MKFIFOAT@
+GNULIB_MKNOD = @GNULIB_MKNOD@
+GNULIB_MKNODAT = @GNULIB_MKNODAT@
+GNULIB_MKOSTEMP = @GNULIB_MKOSTEMP@
+GNULIB_MKOSTEMPS = @GNULIB_MKOSTEMPS@
+GNULIB_MKSTEMP = @GNULIB_MKSTEMP@
+GNULIB_MKSTEMPS = @GNULIB_MKSTEMPS@
+GNULIB_MKTIME = @GNULIB_MKTIME@
+GNULIB_NANOSLEEP = @GNULIB_NANOSLEEP@
+GNULIB_NL_LANGINFO = @GNULIB_NL_LANGINFO@
+GNULIB_OBSTACK_PRINTF = @GNULIB_OBSTACK_PRINTF@
+GNULIB_OBSTACK_PRINTF_POSIX = @GNULIB_OBSTACK_PRINTF_POSIX@
+GNULIB_OPEN = @GNULIB_OPEN@
+GNULIB_OPENAT = @GNULIB_OPENAT@
+GNULIB_PERROR = @GNULIB_PERROR@
+GNULIB_PIPE = @GNULIB_PIPE@
+GNULIB_PIPE2 = @GNULIB_PIPE2@
+GNULIB_POPEN = @GNULIB_POPEN@
+GNULIB_PREAD = @GNULIB_PREAD@
+GNULIB_PRINTF = @GNULIB_PRINTF@
+GNULIB_PRINTF_POSIX = @GNULIB_PRINTF_POSIX@
+GNULIB_PTSNAME = @GNULIB_PTSNAME@
+GNULIB_PUTC = @GNULIB_PUTC@
+GNULIB_PUTCHAR = @GNULIB_PUTCHAR@
+GNULIB_PUTENV = @GNULIB_PUTENV@
+GNULIB_PUTS = @GNULIB_PUTS@
+GNULIB_PWRITE = @GNULIB_PWRITE@
+GNULIB_RANDOM_R = @GNULIB_RANDOM_R@
+GNULIB_RAWMEMCHR = @GNULIB_RAWMEMCHR@
+GNULIB_READLINK = @GNULIB_READLINK@
+GNULIB_READLINKAT = @GNULIB_READLINKAT@
+GNULIB_REALLOC_POSIX = @GNULIB_REALLOC_POSIX@
+GNULIB_REALPATH = @GNULIB_REALPATH@
+GNULIB_REMOVE = @GNULIB_REMOVE@
+GNULIB_RENAME = @GNULIB_RENAME@
+GNULIB_RENAMEAT = @GNULIB_RENAMEAT@
+GNULIB_RMDIR = @GNULIB_RMDIR@
+GNULIB_RPMATCH = @GNULIB_RPMATCH@
+GNULIB_SCANDIR = @GNULIB_SCANDIR@
+GNULIB_SETENV = @GNULIB_SETENV@
+GNULIB_SLEEP = @GNULIB_SLEEP@
+GNULIB_SNPRINTF = @GNULIB_SNPRINTF@
+GNULIB_SPRINTF_POSIX = @GNULIB_SPRINTF_POSIX@
+GNULIB_STAT = @GNULIB_STAT@
+GNULIB_STDIO_H_SIGPIPE = @GNULIB_STDIO_H_SIGPIPE@
+GNULIB_STPCPY = @GNULIB_STPCPY@
+GNULIB_STPNCPY = @GNULIB_STPNCPY@
+GNULIB_STRCASESTR = @GNULIB_STRCASESTR@
+GNULIB_STRCHRNUL = @GNULIB_STRCHRNUL@
+GNULIB_STRDUP = @GNULIB_STRDUP@
+GNULIB_STRERROR = @GNULIB_STRERROR@
+GNULIB_STRERROR_R = @GNULIB_STRERROR_R@
+GNULIB_STRNCAT = @GNULIB_STRNCAT@
+GNULIB_STRNDUP = @GNULIB_STRNDUP@
+GNULIB_STRNLEN = @GNULIB_STRNLEN@
+GNULIB_STRPBRK = @GNULIB_STRPBRK@
+GNULIB_STRPTIME = @GNULIB_STRPTIME@
+GNULIB_STRSEP = @GNULIB_STRSEP@
+GNULIB_STRSIGNAL = @GNULIB_STRSIGNAL@
+GNULIB_STRSTR = @GNULIB_STRSTR@
+GNULIB_STRTOD = @GNULIB_STRTOD@
+GNULIB_STRTOIMAX = @GNULIB_STRTOIMAX@
+GNULIB_STRTOK_R = @GNULIB_STRTOK_R@
+GNULIB_STRTOLL = @GNULIB_STRTOLL@
+GNULIB_STRTOULL = @GNULIB_STRTOULL@
+GNULIB_STRTOUMAX = @GNULIB_STRTOUMAX@
+GNULIB_STRVERSCMP = @GNULIB_STRVERSCMP@
+GNULIB_SYMLINK = @GNULIB_SYMLINK@
+GNULIB_SYMLINKAT = @GNULIB_SYMLINKAT@
+GNULIB_SYSTEM_POSIX = @GNULIB_SYSTEM_POSIX@
+GNULIB_TIMEGM = @GNULIB_TIMEGM@
+GNULIB_TIME_R = @GNULIB_TIME_R@
+GNULIB_TMPFILE = @GNULIB_TMPFILE@
+GNULIB_TOWCTRANS = @GNULIB_TOWCTRANS@
+GNULIB_TTYNAME_R = @GNULIB_TTYNAME_R@
+GNULIB_UNISTD_H_GETOPT = @GNULIB_UNISTD_H_GETOPT@
+GNULIB_UNISTD_H_SIGPIPE = @GNULIB_UNISTD_H_SIGPIPE@
+GNULIB_UNLINK = @GNULIB_UNLINK@
+GNULIB_UNLINKAT = @GNULIB_UNLINKAT@
+GNULIB_UNLOCKPT = @GNULIB_UNLOCKPT@
+GNULIB_UNSETENV = @GNULIB_UNSETENV@
+GNULIB_USLEEP = @GNULIB_USLEEP@
+GNULIB_UTIMENSAT = @GNULIB_UTIMENSAT@
+GNULIB_VASPRINTF = @GNULIB_VASPRINTF@
+GNULIB_VDPRINTF = @GNULIB_VDPRINTF@
+GNULIB_VFPRINTF = @GNULIB_VFPRINTF@
+GNULIB_VFPRINTF_POSIX = @GNULIB_VFPRINTF_POSIX@
+GNULIB_VPRINTF = @GNULIB_VPRINTF@
+GNULIB_VPRINTF_POSIX = @GNULIB_VPRINTF_POSIX@
+GNULIB_VSNPRINTF = @GNULIB_VSNPRINTF@
+GNULIB_VSPRINTF_POSIX = @GNULIB_VSPRINTF_POSIX@
+GNULIB_WCPCPY = @GNULIB_WCPCPY@
+GNULIB_WCPNCPY = @GNULIB_WCPNCPY@
+GNULIB_WCRTOMB = @GNULIB_WCRTOMB@
+GNULIB_WCSCASECMP = @GNULIB_WCSCASECMP@
+GNULIB_WCSCAT = @GNULIB_WCSCAT@
+GNULIB_WCSCHR = @GNULIB_WCSCHR@
+GNULIB_WCSCMP = @GNULIB_WCSCMP@
+GNULIB_WCSCOLL = @GNULIB_WCSCOLL@
+GNULIB_WCSCPY = @GNULIB_WCSCPY@
+GNULIB_WCSCSPN = @GNULIB_WCSCSPN@
+GNULIB_WCSDUP = @GNULIB_WCSDUP@
+GNULIB_WCSLEN = @GNULIB_WCSLEN@
+GNULIB_WCSNCASECMP = @GNULIB_WCSNCASECMP@
+GNULIB_WCSNCAT = @GNULIB_WCSNCAT@
+GNULIB_WCSNCMP = @GNULIB_WCSNCMP@
+GNULIB_WCSNCPY = @GNULIB_WCSNCPY@
+GNULIB_WCSNLEN = @GNULIB_WCSNLEN@
+GNULIB_WCSNRTOMBS = @GNULIB_WCSNRTOMBS@
+GNULIB_WCSPBRK = @GNULIB_WCSPBRK@
+GNULIB_WCSRCHR = @GNULIB_WCSRCHR@
+GNULIB_WCSRTOMBS = @GNULIB_WCSRTOMBS@
+GNULIB_WCSSPN = @GNULIB_WCSSPN@
+GNULIB_WCSSTR = @GNULIB_WCSSTR@
+GNULIB_WCSTOK = @GNULIB_WCSTOK@
+GNULIB_WCSWIDTH = @GNULIB_WCSWIDTH@
+GNULIB_WCSXFRM = @GNULIB_WCSXFRM@
+GNULIB_WCTOB = @GNULIB_WCTOB@
+GNULIB_WCTOMB = @GNULIB_WCTOMB@
+GNULIB_WCTRANS = @GNULIB_WCTRANS@
+GNULIB_WCTYPE = @GNULIB_WCTYPE@
+GNULIB_WCWIDTH = @GNULIB_WCWIDTH@
+GNULIB_WMEMCHR = @GNULIB_WMEMCHR@
+GNULIB_WMEMCMP = @GNULIB_WMEMCMP@
+GNULIB_WMEMCPY = @GNULIB_WMEMCPY@
+GNULIB_WMEMMOVE = @GNULIB_WMEMMOVE@
+GNULIB_WMEMSET = @GNULIB_WMEMSET@
+GNULIB_WRITE = @GNULIB_WRITE@
+GNULIB__EXIT = @GNULIB__EXIT@
+GREP = @GREP@
+HAVE_ALPHASORT = @HAVE_ALPHASORT@
+HAVE_ATOLL = @HAVE_ATOLL@
+HAVE_BTOWC = @HAVE_BTOWC@
+HAVE_CANONICALIZE_FILE_NAME = @HAVE_CANONICALIZE_FILE_NAME@
+HAVE_CHOWN = @HAVE_CHOWN@
+HAVE_DECL_DIRFD = @HAVE_DECL_DIRFD@
+HAVE_DECL_ENVIRON = @HAVE_DECL_ENVIRON@
+HAVE_DECL_FCHDIR = @HAVE_DECL_FCHDIR@
+HAVE_DECL_FDOPENDIR = @HAVE_DECL_FDOPENDIR@
+HAVE_DECL_FPURGE = @HAVE_DECL_FPURGE@
+HAVE_DECL_FSEEKO = @HAVE_DECL_FSEEKO@
+HAVE_DECL_FTELLO = @HAVE_DECL_FTELLO@
+HAVE_DECL_GETDELIM = @HAVE_DECL_GETDELIM@
+HAVE_DECL_GETDOMAINNAME = @HAVE_DECL_GETDOMAINNAME@
+HAVE_DECL_GETLINE = @HAVE_DECL_GETLINE@
+HAVE_DECL_GETLOADAVG = @HAVE_DECL_GETLOADAVG@
+HAVE_DECL_GETLOGIN_R = @HAVE_DECL_GETLOGIN_R@
+HAVE_DECL_GETPAGESIZE = @HAVE_DECL_GETPAGESIZE@
+HAVE_DECL_GETUSERSHELL = @HAVE_DECL_GETUSERSHELL@
+HAVE_DECL_IMAXABS = @HAVE_DECL_IMAXABS@
+HAVE_DECL_IMAXDIV = @HAVE_DECL_IMAXDIV@
+HAVE_DECL_LOCALTIME_R = @HAVE_DECL_LOCALTIME_R@
+HAVE_DECL_MEMMEM = @HAVE_DECL_MEMMEM@
+HAVE_DECL_MEMRCHR = @HAVE_DECL_MEMRCHR@
+HAVE_DECL_OBSTACK_PRINTF = @HAVE_DECL_OBSTACK_PRINTF@
+HAVE_DECL_SETENV = @HAVE_DECL_SETENV@
+HAVE_DECL_SNPRINTF = @HAVE_DECL_SNPRINTF@
+HAVE_DECL_STRDUP = @HAVE_DECL_STRDUP@
+HAVE_DECL_STRERROR_R = @HAVE_DECL_STRERROR_R@
+HAVE_DECL_STRNCASECMP = @HAVE_DECL_STRNCASECMP@
+HAVE_DECL_STRNDUP = @HAVE_DECL_STRNDUP@
+HAVE_DECL_STRNLEN = @HAVE_DECL_STRNLEN@
+HAVE_DECL_STRSIGNAL = @HAVE_DECL_STRSIGNAL@
+HAVE_DECL_STRTOIMAX = @HAVE_DECL_STRTOIMAX@
+HAVE_DECL_STRTOK_R = @HAVE_DECL_STRTOK_R@
+HAVE_DECL_STRTOUMAX = @HAVE_DECL_STRTOUMAX@
+HAVE_DECL_TTYNAME_R = @HAVE_DECL_TTYNAME_R@
+HAVE_DECL_UNSETENV = @HAVE_DECL_UNSETENV@
+HAVE_DECL_VSNPRINTF = @HAVE_DECL_VSNPRINTF@
+HAVE_DECL_WCTOB = @HAVE_DECL_WCTOB@
+HAVE_DECL_WCWIDTH = @HAVE_DECL_WCWIDTH@
+HAVE_DPRINTF = @HAVE_DPRINTF@
+HAVE_DUP2 = @HAVE_DUP2@
+HAVE_DUP3 = @HAVE_DUP3@
+HAVE_EUIDACCESS = @HAVE_EUIDACCESS@
+HAVE_FACCESSAT = @HAVE_FACCESSAT@
+HAVE_FCHDIR = @HAVE_FCHDIR@
+HAVE_FCHMODAT = @HAVE_FCHMODAT@
+HAVE_FCHOWNAT = @HAVE_FCHOWNAT@
+HAVE_FCNTL = @HAVE_FCNTL@
+HAVE_FDOPENDIR = @HAVE_FDOPENDIR@
+HAVE_FEATURES_H = @HAVE_FEATURES_H@
+HAVE_FSEEKO = @HAVE_FSEEKO@
+HAVE_FSTATAT = @HAVE_FSTATAT@
+HAVE_FSYNC = @HAVE_FSYNC@
+HAVE_FTELLO = @HAVE_FTELLO@
+HAVE_FTRUNCATE = @HAVE_FTRUNCATE@
+HAVE_FUTIMENS = @HAVE_FUTIMENS@
+HAVE_GETDTABLESIZE = @HAVE_GETDTABLESIZE@
+HAVE_GETGROUPS = @HAVE_GETGROUPS@
+HAVE_GETHOSTNAME = @HAVE_GETHOSTNAME@
+HAVE_GETLOGIN = @HAVE_GETLOGIN@
+HAVE_GETOPT_H = @HAVE_GETOPT_H@
+HAVE_GETPAGESIZE = @HAVE_GETPAGESIZE@
+HAVE_GETSUBOPT = @HAVE_GETSUBOPT@
+HAVE_GETTIMEOFDAY = @HAVE_GETTIMEOFDAY@
+HAVE_GRANTPT = @HAVE_GRANTPT@
+HAVE_INTTYPES_H = @HAVE_INTTYPES_H@
+HAVE_ISWBLANK = @HAVE_ISWBLANK@
+HAVE_ISWCNTRL = @HAVE_ISWCNTRL@
+HAVE_LANGINFO_CODESET = @HAVE_LANGINFO_CODESET@
+HAVE_LANGINFO_ERA = @HAVE_LANGINFO_ERA@
+HAVE_LANGINFO_H = @HAVE_LANGINFO_H@
+HAVE_LANGINFO_T_FMT_AMPM = @HAVE_LANGINFO_T_FMT_AMPM@
+HAVE_LANGINFO_YESEXPR = @HAVE_LANGINFO_YESEXPR@
+HAVE_LCHMOD = @HAVE_LCHMOD@
+HAVE_LCHOWN = @HAVE_LCHOWN@
+HAVE_LINK = @HAVE_LINK@
+HAVE_LINKAT = @HAVE_LINKAT@
+HAVE_LONG_LONG_INT = @HAVE_LONG_LONG_INT@
+HAVE_LSTAT = @HAVE_LSTAT@
+HAVE_MBRLEN = @HAVE_MBRLEN@
+HAVE_MBRTOWC = @HAVE_MBRTOWC@
+HAVE_MBSINIT = @HAVE_MBSINIT@
+HAVE_MBSLEN = @HAVE_MBSLEN@
+HAVE_MBSNRTOWCS = @HAVE_MBSNRTOWCS@
+HAVE_MBSRTOWCS = @HAVE_MBSRTOWCS@
+HAVE_MEMCHR = @HAVE_MEMCHR@
+HAVE_MEMPCPY = @HAVE_MEMPCPY@
+HAVE_MKDIRAT = @HAVE_MKDIRAT@
+HAVE_MKDTEMP = @HAVE_MKDTEMP@
+HAVE_MKFIFO = @HAVE_MKFIFO@
+HAVE_MKFIFOAT = @HAVE_MKFIFOAT@
+HAVE_MKNOD = @HAVE_MKNOD@
+HAVE_MKNODAT = @HAVE_MKNODAT@
+HAVE_MKOSTEMP = @HAVE_MKOSTEMP@
+HAVE_MKOSTEMPS = @HAVE_MKOSTEMPS@
+HAVE_MKSTEMP = @HAVE_MKSTEMP@
+HAVE_MKSTEMPS = @HAVE_MKSTEMPS@
+HAVE_NANOSLEEP = @HAVE_NANOSLEEP@
+HAVE_NL_LANGINFO = @HAVE_NL_LANGINFO@
+HAVE_OPENAT = @HAVE_OPENAT@
+HAVE_OS_H = @HAVE_OS_H@
+HAVE_PIPE = @HAVE_PIPE@
+HAVE_PIPE2 = @HAVE_PIPE2@
+HAVE_PREAD = @HAVE_PREAD@
+HAVE_PTSNAME = @HAVE_PTSNAME@
+HAVE_PWRITE = @HAVE_PWRITE@
+HAVE_RANDOM_H = @HAVE_RANDOM_H@
+HAVE_RANDOM_R = @HAVE_RANDOM_R@
+HAVE_RAWMEMCHR = @HAVE_RAWMEMCHR@
+HAVE_READLINK = @HAVE_READLINK@
+HAVE_READLINKAT = @HAVE_READLINKAT@
+HAVE_REALPATH = @HAVE_REALPATH@
+HAVE_RENAMEAT = @HAVE_RENAMEAT@
+HAVE_RPMATCH = @HAVE_RPMATCH@
+HAVE_SCANDIR = @HAVE_SCANDIR@
+HAVE_SETENV = @HAVE_SETENV@
+HAVE_SIGNED_SIG_ATOMIC_T = @HAVE_SIGNED_SIG_ATOMIC_T@
+HAVE_SIGNED_WCHAR_T = @HAVE_SIGNED_WCHAR_T@
+HAVE_SIGNED_WINT_T = @HAVE_SIGNED_WINT_T@
+HAVE_SLEEP = @HAVE_SLEEP@
+HAVE_STDINT_H = @HAVE_STDINT_H@
+HAVE_STPCPY = @HAVE_STPCPY@
+HAVE_STPNCPY = @HAVE_STPNCPY@
+HAVE_STRCASECMP = @HAVE_STRCASECMP@
+HAVE_STRCASESTR = @HAVE_STRCASESTR@
+HAVE_STRCHRNUL = @HAVE_STRCHRNUL@
+HAVE_STRPBRK = @HAVE_STRPBRK@
+HAVE_STRPTIME = @HAVE_STRPTIME@
+HAVE_STRSEP = @HAVE_STRSEP@
+HAVE_STRTOD = @HAVE_STRTOD@
+HAVE_STRTOLL = @HAVE_STRTOLL@
+HAVE_STRTOULL = @HAVE_STRTOULL@
+HAVE_STRUCT_RANDOM_DATA = @HAVE_STRUCT_RANDOM_DATA@
+HAVE_STRUCT_TIMEVAL = @HAVE_STRUCT_TIMEVAL@
+HAVE_STRVERSCMP = @HAVE_STRVERSCMP@
+HAVE_SYMLINK = @HAVE_SYMLINK@
+HAVE_SYMLINKAT = @HAVE_SYMLINKAT@
+HAVE_SYSEXITS_H = @HAVE_SYSEXITS_H@
+HAVE_SYS_BITYPES_H = @HAVE_SYS_BITYPES_H@
+HAVE_SYS_INTTYPES_H = @HAVE_SYS_INTTYPES_H@
+HAVE_SYS_LOADAVG_H = @HAVE_SYS_LOADAVG_H@
+HAVE_SYS_PARAM_H = @HAVE_SYS_PARAM_H@
+HAVE_SYS_TIME_H = @HAVE_SYS_TIME_H@
+HAVE_SYS_TYPES_H = @HAVE_SYS_TYPES_H@
+HAVE_TIMEGM = @HAVE_TIMEGM@
+HAVE_UNISTD_H = @HAVE_UNISTD_H@
+HAVE_UNLINKAT = @HAVE_UNLINKAT@
+HAVE_UNLOCKPT = @HAVE_UNLOCKPT@
+HAVE_UNSIGNED_LONG_LONG_INT = @HAVE_UNSIGNED_LONG_LONG_INT@
+HAVE_USLEEP = @HAVE_USLEEP@
+HAVE_UTIMENSAT = @HAVE_UTIMENSAT@
+HAVE_VASPRINTF = @HAVE_VASPRINTF@
+HAVE_VDPRINTF = @HAVE_VDPRINTF@
+HAVE_WCHAR_H = @HAVE_WCHAR_H@
+HAVE_WCHAR_T = @HAVE_WCHAR_T@
+HAVE_WCPCPY = @HAVE_WCPCPY@
+HAVE_WCPNCPY = @HAVE_WCPNCPY@
+HAVE_WCRTOMB = @HAVE_WCRTOMB@
+HAVE_WCSCASECMP = @HAVE_WCSCASECMP@
+HAVE_WCSCAT = @HAVE_WCSCAT@
+HAVE_WCSCHR = @HAVE_WCSCHR@
+HAVE_WCSCMP = @HAVE_WCSCMP@
+HAVE_WCSCOLL = @HAVE_WCSCOLL@
+HAVE_WCSCPY = @HAVE_WCSCPY@
+HAVE_WCSCSPN = @HAVE_WCSCSPN@
+HAVE_WCSDUP = @HAVE_WCSDUP@
+HAVE_WCSLEN = @HAVE_WCSLEN@
+HAVE_WCSNCASECMP = @HAVE_WCSNCASECMP@
+HAVE_WCSNCAT = @HAVE_WCSNCAT@
+HAVE_WCSNCMP = @HAVE_WCSNCMP@
+HAVE_WCSNCPY = @HAVE_WCSNCPY@
+HAVE_WCSNLEN = @HAVE_WCSNLEN@
+HAVE_WCSNRTOMBS = @HAVE_WCSNRTOMBS@
+HAVE_WCSPBRK = @HAVE_WCSPBRK@
+HAVE_WCSRCHR = @HAVE_WCSRCHR@
+HAVE_WCSRTOMBS = @HAVE_WCSRTOMBS@
+HAVE_WCSSPN = @HAVE_WCSSPN@
+HAVE_WCSSTR = @HAVE_WCSSTR@
+HAVE_WCSTOK = @HAVE_WCSTOK@
+HAVE_WCSWIDTH = @HAVE_WCSWIDTH@
+HAVE_WCSXFRM = @HAVE_WCSXFRM@
+HAVE_WCTRANS_T = @HAVE_WCTRANS_T@
+HAVE_WCTYPE_H = @HAVE_WCTYPE_H@
+HAVE_WCTYPE_T = @HAVE_WCTYPE_T@
+HAVE_WINT_T = @HAVE_WINT_T@
+HAVE_WMEMCHR = @HAVE_WMEMCHR@
+HAVE_WMEMCMP = @HAVE_WMEMCMP@
+HAVE_WMEMCPY = @HAVE_WMEMCPY@
+HAVE_WMEMMOVE = @HAVE_WMEMMOVE@
+HAVE_WMEMSET = @HAVE_WMEMSET@
+HAVE__BOOL = @HAVE__BOOL@
+HAVE__EXIT = @HAVE__EXIT@
+INCLUDE_NEXT = @INCLUDE_NEXT@
+INCLUDE_NEXT_AS_FIRST_DIRECTIVE = @INCLUDE_NEXT_AS_FIRST_DIRECTIVE@
+INSTALL = @INSTALL@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+INT32_MAX_LT_INTMAX_MAX = @INT32_MAX_LT_INTMAX_MAX@
+INT64_MAX_EQ_LONG_MAX = @INT64_MAX_EQ_LONG_MAX@
+INTLLIBS = @INTLLIBS@
+INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@
+LDFLAGS = @LDFLAGS@
+LIBGNU_LIBDEPS = @LIBGNU_LIBDEPS@
+LIBGNU_LTLIBDEPS = @LIBGNU_LTLIBDEPS@
+LIBICONV = @LIBICONV@
+LIBINTL = @LIBINTL@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
+LIBUNISTRING_UNITYPES_H = @LIBUNISTRING_UNITYPES_H@
+LIBUNISTRING_UNIWIDTH_H = @LIBUNISTRING_UNIWIDTH_H@
+LIB_CLOCK_GETTIME = @LIB_CLOCK_GETTIME@
+LIB_SETSOCKOPT = @LIB_SETSOCKOPT@
+LOCALCHARSET_TESTS_ENVIRONMENT = @LOCALCHARSET_TESTS_ENVIRONMENT@
+LOCALE_FR = @LOCALE_FR@
+LOCALE_FR_UTF8 = @LOCALE_FR_UTF8@
+LOCALE_JA = @LOCALE_JA@
+LOCALE_ZH_CN = @LOCALE_ZH_CN@
+LTLIBICONV = @LTLIBICONV@
+LTLIBINTL = @LTLIBINTL@
+LTLIBOBJS = @LTLIBOBJS@
+MAKEINFO = @MAKEINFO@
+MKDIR_P = @MKDIR_P@
+MSGFMT = @MSGFMT@
+MSGFMT_015 = @MSGFMT_015@
+MSGMERGE = @MSGMERGE@
+NEXT_AS_FIRST_DIRECTIVE_DIRENT_H = @NEXT_AS_FIRST_DIRECTIVE_DIRENT_H@
+NEXT_AS_FIRST_DIRECTIVE_ERRNO_H = @NEXT_AS_FIRST_DIRECTIVE_ERRNO_H@
+NEXT_AS_FIRST_DIRECTIVE_FCNTL_H = @NEXT_AS_FIRST_DIRECTIVE_FCNTL_H@
+NEXT_AS_FIRST_DIRECTIVE_FLOAT_H = @NEXT_AS_FIRST_DIRECTIVE_FLOAT_H@
+NEXT_AS_FIRST_DIRECTIVE_GETOPT_H = @NEXT_AS_FIRST_DIRECTIVE_GETOPT_H@
+NEXT_AS_FIRST_DIRECTIVE_INTTYPES_H = @NEXT_AS_FIRST_DIRECTIVE_INTTYPES_H@
+NEXT_AS_FIRST_DIRECTIVE_LANGINFO_H = @NEXT_AS_FIRST_DIRECTIVE_LANGINFO_H@
+NEXT_AS_FIRST_DIRECTIVE_STDARG_H = @NEXT_AS_FIRST_DIRECTIVE_STDARG_H@
+NEXT_AS_FIRST_DIRECTIVE_STDDEF_H = @NEXT_AS_FIRST_DIRECTIVE_STDDEF_H@
+NEXT_AS_FIRST_DIRECTIVE_STDINT_H = @NEXT_AS_FIRST_DIRECTIVE_STDINT_H@
+NEXT_AS_FIRST_DIRECTIVE_STDIO_H = @NEXT_AS_FIRST_DIRECTIVE_STDIO_H@
+NEXT_AS_FIRST_DIRECTIVE_STDLIB_H = @NEXT_AS_FIRST_DIRECTIVE_STDLIB_H@
+NEXT_AS_FIRST_DIRECTIVE_STRINGS_H = @NEXT_AS_FIRST_DIRECTIVE_STRINGS_H@
+NEXT_AS_FIRST_DIRECTIVE_STRING_H = @NEXT_AS_FIRST_DIRECTIVE_STRING_H@
+NEXT_AS_FIRST_DIRECTIVE_SYSEXITS_H = @NEXT_AS_FIRST_DIRECTIVE_SYSEXITS_H@
+NEXT_AS_FIRST_DIRECTIVE_SYS_STAT_H = @NEXT_AS_FIRST_DIRECTIVE_SYS_STAT_H@
+NEXT_AS_FIRST_DIRECTIVE_SYS_TIME_H = @NEXT_AS_FIRST_DIRECTIVE_SYS_TIME_H@
+NEXT_AS_FIRST_DIRECTIVE_TIME_H = @NEXT_AS_FIRST_DIRECTIVE_TIME_H@
+NEXT_AS_FIRST_DIRECTIVE_UNISTD_H = @NEXT_AS_FIRST_DIRECTIVE_UNISTD_H@
+NEXT_AS_FIRST_DIRECTIVE_WCHAR_H = @NEXT_AS_FIRST_DIRECTIVE_WCHAR_H@
+NEXT_AS_FIRST_DIRECTIVE_WCTYPE_H = @NEXT_AS_FIRST_DIRECTIVE_WCTYPE_H@
+NEXT_DIRENT_H = @NEXT_DIRENT_H@
+NEXT_ERRNO_H = @NEXT_ERRNO_H@
+NEXT_FCNTL_H = @NEXT_FCNTL_H@
+NEXT_FLOAT_H = @NEXT_FLOAT_H@
+NEXT_GETOPT_H = @NEXT_GETOPT_H@
+NEXT_INTTYPES_H = @NEXT_INTTYPES_H@
+NEXT_LANGINFO_H = @NEXT_LANGINFO_H@
+NEXT_STDARG_H = @NEXT_STDARG_H@
+NEXT_STDDEF_H = @NEXT_STDDEF_H@
+NEXT_STDINT_H = @NEXT_STDINT_H@
+NEXT_STDIO_H = @NEXT_STDIO_H@
+NEXT_STDLIB_H = @NEXT_STDLIB_H@
+NEXT_STRINGS_H = @NEXT_STRINGS_H@
+NEXT_STRING_H = @NEXT_STRING_H@
+NEXT_SYSEXITS_H = @NEXT_SYSEXITS_H@
+NEXT_SYS_STAT_H = @NEXT_SYS_STAT_H@
+NEXT_SYS_TIME_H = @NEXT_SYS_TIME_H@
+NEXT_TIME_H = @NEXT_TIME_H@
+NEXT_UNISTD_H = @NEXT_UNISTD_H@
+NEXT_WCHAR_H = @NEXT_WCHAR_H@
+NEXT_WCTYPE_H = @NEXT_WCTYPE_H@
+OBJEXT = @OBJEXT@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+POSUB = @POSUB@
+PRAGMA_COLUMNS = @PRAGMA_COLUMNS@
+PRAGMA_SYSTEM_HEADER = @PRAGMA_SYSTEM_HEADER@
+PRIPTR_PREFIX = @PRIPTR_PREFIX@
+PRI_MACROS_BROKEN = @PRI_MACROS_BROKEN@
+PTHREAD_H_DEFINES_STRUCT_TIMESPEC = @PTHREAD_H_DEFINES_STRUCT_TIMESPEC@
+PTRDIFF_T_SUFFIX = @PTRDIFF_T_SUFFIX@
+PU_RMT_PROG = @PU_RMT_PROG@
+RANLIB = @RANLIB@
+REPLACE_BTOWC = @REPLACE_BTOWC@
+REPLACE_CALLOC = @REPLACE_CALLOC@
+REPLACE_CANONICALIZE_FILE_NAME = @REPLACE_CANONICALIZE_FILE_NAME@
+REPLACE_CHOWN = @REPLACE_CHOWN@
+REPLACE_CLOSE = @REPLACE_CLOSE@
+REPLACE_CLOSEDIR = @REPLACE_CLOSEDIR@
+REPLACE_DIRFD = @REPLACE_DIRFD@
+REPLACE_DPRINTF = @REPLACE_DPRINTF@
+REPLACE_DUP = @REPLACE_DUP@
+REPLACE_DUP2 = @REPLACE_DUP2@
+REPLACE_FCHOWNAT = @REPLACE_FCHOWNAT@
+REPLACE_FCLOSE = @REPLACE_FCLOSE@
+REPLACE_FCNTL = @REPLACE_FCNTL@
+REPLACE_FDOPENDIR = @REPLACE_FDOPENDIR@
+REPLACE_FFLUSH = @REPLACE_FFLUSH@
+REPLACE_FOPEN = @REPLACE_FOPEN@
+REPLACE_FPRINTF = @REPLACE_FPRINTF@
+REPLACE_FPURGE = @REPLACE_FPURGE@
+REPLACE_FREOPEN = @REPLACE_FREOPEN@
+REPLACE_FSEEK = @REPLACE_FSEEK@
+REPLACE_FSEEKO = @REPLACE_FSEEKO@
+REPLACE_FSTAT = @REPLACE_FSTAT@
+REPLACE_FSTATAT = @REPLACE_FSTATAT@
+REPLACE_FTELL = @REPLACE_FTELL@
+REPLACE_FTELLO = @REPLACE_FTELLO@
+REPLACE_FUTIMENS = @REPLACE_FUTIMENS@
+REPLACE_GETCWD = @REPLACE_GETCWD@
+REPLACE_GETDELIM = @REPLACE_GETDELIM@
+REPLACE_GETDOMAINNAME = @REPLACE_GETDOMAINNAME@
+REPLACE_GETGROUPS = @REPLACE_GETGROUPS@
+REPLACE_GETLINE = @REPLACE_GETLINE@
+REPLACE_GETLOGIN_R = @REPLACE_GETLOGIN_R@
+REPLACE_GETPAGESIZE = @REPLACE_GETPAGESIZE@
+REPLACE_GETTIMEOFDAY = @REPLACE_GETTIMEOFDAY@
+REPLACE_ISWBLANK = @REPLACE_ISWBLANK@
+REPLACE_ISWCNTRL = @REPLACE_ISWCNTRL@
+REPLACE_LCHOWN = @REPLACE_LCHOWN@
+REPLACE_LINK = @REPLACE_LINK@
+REPLACE_LINKAT = @REPLACE_LINKAT@
+REPLACE_LOCALTIME_R = @REPLACE_LOCALTIME_R@
+REPLACE_LSEEK = @REPLACE_LSEEK@
+REPLACE_LSTAT = @REPLACE_LSTAT@
+REPLACE_MALLOC = @REPLACE_MALLOC@
+REPLACE_MBRLEN = @REPLACE_MBRLEN@
+REPLACE_MBRTOWC = @REPLACE_MBRTOWC@
+REPLACE_MBSINIT = @REPLACE_MBSINIT@
+REPLACE_MBSNRTOWCS = @REPLACE_MBSNRTOWCS@
+REPLACE_MBSRTOWCS = @REPLACE_MBSRTOWCS@
+REPLACE_MBSTATE_T = @REPLACE_MBSTATE_T@
+REPLACE_MBTOWC = @REPLACE_MBTOWC@
+REPLACE_MEMCHR = @REPLACE_MEMCHR@
+REPLACE_MEMMEM = @REPLACE_MEMMEM@
+REPLACE_MKDIR = @REPLACE_MKDIR@
+REPLACE_MKFIFO = @REPLACE_MKFIFO@
+REPLACE_MKNOD = @REPLACE_MKNOD@
+REPLACE_MKSTEMP = @REPLACE_MKSTEMP@
+REPLACE_MKTIME = @REPLACE_MKTIME@
+REPLACE_NANOSLEEP = @REPLACE_NANOSLEEP@
+REPLACE_NL_LANGINFO = @REPLACE_NL_LANGINFO@
+REPLACE_NULL = @REPLACE_NULL@
+REPLACE_OBSTACK_PRINTF = @REPLACE_OBSTACK_PRINTF@
+REPLACE_OPEN = @REPLACE_OPEN@
+REPLACE_OPENAT = @REPLACE_OPENAT@
+REPLACE_OPENDIR = @REPLACE_OPENDIR@
+REPLACE_PERROR = @REPLACE_PERROR@
+REPLACE_POPEN = @REPLACE_POPEN@
+REPLACE_PREAD = @REPLACE_PREAD@
+REPLACE_PRINTF = @REPLACE_PRINTF@
+REPLACE_PUTENV = @REPLACE_PUTENV@
+REPLACE_PWRITE = @REPLACE_PWRITE@
+REPLACE_READLINK = @REPLACE_READLINK@
+REPLACE_REALLOC = @REPLACE_REALLOC@
+REPLACE_REALPATH = @REPLACE_REALPATH@
+REPLACE_REMOVE = @REPLACE_REMOVE@
+REPLACE_RENAME = @REPLACE_RENAME@
+REPLACE_RENAMEAT = @REPLACE_RENAMEAT@
+REPLACE_RMDIR = @REPLACE_RMDIR@
+REPLACE_SETENV = @REPLACE_SETENV@
+REPLACE_SLEEP = @REPLACE_SLEEP@
+REPLACE_SNPRINTF = @REPLACE_SNPRINTF@
+REPLACE_SPRINTF = @REPLACE_SPRINTF@
+REPLACE_STAT = @REPLACE_STAT@
+REPLACE_STDIO_WRITE_FUNCS = @REPLACE_STDIO_WRITE_FUNCS@
+REPLACE_STPNCPY = @REPLACE_STPNCPY@
+REPLACE_STRCASESTR = @REPLACE_STRCASESTR@
+REPLACE_STRDUP = @REPLACE_STRDUP@
+REPLACE_STRERROR = @REPLACE_STRERROR@
+REPLACE_STRERROR_R = @REPLACE_STRERROR_R@
+REPLACE_STRNCAT = @REPLACE_STRNCAT@
+REPLACE_STRNDUP = @REPLACE_STRNDUP@
+REPLACE_STRNLEN = @REPLACE_STRNLEN@
+REPLACE_STRSIGNAL = @REPLACE_STRSIGNAL@
+REPLACE_STRSTR = @REPLACE_STRSTR@
+REPLACE_STRTOD = @REPLACE_STRTOD@
+REPLACE_STRTOK_R = @REPLACE_STRTOK_R@
+REPLACE_SYMLINK = @REPLACE_SYMLINK@
+REPLACE_TIMEGM = @REPLACE_TIMEGM@
+REPLACE_TMPFILE = @REPLACE_TMPFILE@
+REPLACE_TTYNAME_R = @REPLACE_TTYNAME_R@
+REPLACE_UNLINK = @REPLACE_UNLINK@
+REPLACE_UNLINKAT = @REPLACE_UNLINKAT@
+REPLACE_UNSETENV = @REPLACE_UNSETENV@
+REPLACE_USLEEP = @REPLACE_USLEEP@
+REPLACE_UTIMENSAT = @REPLACE_UTIMENSAT@
+REPLACE_VASPRINTF = @REPLACE_VASPRINTF@
+REPLACE_VDPRINTF = @REPLACE_VDPRINTF@
+REPLACE_VFPRINTF = @REPLACE_VFPRINTF@
+REPLACE_VPRINTF = @REPLACE_VPRINTF@
+REPLACE_VSNPRINTF = @REPLACE_VSNPRINTF@
+REPLACE_VSPRINTF = @REPLACE_VSPRINTF@
+REPLACE_WCRTOMB = @REPLACE_WCRTOMB@
+REPLACE_WCSNRTOMBS = @REPLACE_WCSNRTOMBS@
+REPLACE_WCSRTOMBS = @REPLACE_WCSRTOMBS@
+REPLACE_WCSWIDTH = @REPLACE_WCSWIDTH@
+REPLACE_WCTOB = @REPLACE_WCTOB@
+REPLACE_WCTOMB = @REPLACE_WCTOMB@
+REPLACE_WCWIDTH = @REPLACE_WCWIDTH@
+REPLACE_WRITE = @REPLACE_WRITE@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+SIG_ATOMIC_T_SUFFIX = @SIG_ATOMIC_T_SUFFIX@
+SIZE_T_SUFFIX = @SIZE_T_SUFFIX@
+STDARG_H = @STDARG_H@
+STDBOOL_H = @STDBOOL_H@
+STDDEF_H = @STDDEF_H@
+STDINT_H = @STDINT_H@
+STRIP = @STRIP@
+SYSEXITS_H = @SYSEXITS_H@
+SYS_TIME_H_DEFINES_STRUCT_TIMESPEC = @SYS_TIME_H_DEFINES_STRUCT_TIMESPEC@
+TIME_H_DEFINES_STRUCT_TIMESPEC = @TIME_H_DEFINES_STRUCT_TIMESPEC@
+UINT32_MAX_LT_UINTMAX_MAX = @UINT32_MAX_LT_UINTMAX_MAX@
+UINT64_MAX_EQ_ULONG_MAX = @UINT64_MAX_EQ_ULONG_MAX@
+UNDEFINE_STRTOK_R = @UNDEFINE_STRTOK_R@
+UNISTD_H_HAVE_WINSOCK2_H = @UNISTD_H_HAVE_WINSOCK2_H@
+UNISTD_H_HAVE_WINSOCK2_H_AND_USE_SOCKETS = @UNISTD_H_HAVE_WINSOCK2_H_AND_USE_SOCKETS@
+USE_NLS = @USE_NLS@
+VERSION = @VERSION@
+WCHAR_T_SUFFIX = @WCHAR_T_SUFFIX@
+WINT_T_SUFFIX = @WINT_T_SUFFIX@
+XGETTEXT = @XGETTEXT@
+XGETTEXT_015 = @XGETTEXT_015@
+XGETTEXT_EXTRA_OPTIONS = @XGETTEXT_EXTRA_OPTIONS@
+YACC = @YACC@
+YFLAGS = @YFLAGS@
+abs_builddir = @abs_builddir@
+abs_srcdir = @abs_srcdir@
+abs_top_builddir = @abs_top_builddir@
+abs_top_srcdir = @abs_top_srcdir@
+ac_ct_CC = @ac_ct_CC@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+am__tar = @am__tar@
+am__untar = @am__untar@
+bindir = @bindir@
+build = @build@
+build_alias = @build_alias@
+build_cpu = @build_cpu@
+build_os = @build_os@
+build_vendor = @build_vendor@
+builddir = @builddir@
+datadir = @datadir@
+datarootdir = @datarootdir@
+docdir = @docdir@
+dvidir = @dvidir@
+exec_prefix = @exec_prefix@
+gl_LIBOBJS = @gl_LIBOBJS@
+gl_LTLIBOBJS = @gl_LTLIBOBJS@
+gltests_LIBOBJS = @gltests_LIBOBJS@
+gltests_LTLIBOBJS = @gltests_LTLIBOBJS@
+gltests_WITNESS = @gltests_WITNESS@
+host = @host@
+host_alias = @host_alias@
+host_cpu = @host_cpu@
+host_os = @host_os@
+host_vendor = @host_vendor@
+htmldir = @htmldir@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+lispdir = @lispdir@
+localedir = @localedir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+oldincludedir = @oldincludedir@
+pdfdir = @pdfdir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+psdir = @psdir@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+srcdir = @srcdir@
+sysconfdir = @sysconfdir@
+target_alias = @target_alias@
+top_build_prefix = @top_build_prefix@
+top_builddir = @top_builddir@
+top_srcdir = @top_srcdir@
+info_TEXINFOS = tar.texi
+tar_TEXINFOS = \
+ dumpdir.texi\
+ tar-snapshot-edit.texi\
+ fdl.texi\
+ freemanuals.texi\
+ genfile.texi\
+ header.texi\
+ intern.texi\
+ parse-datetime.texi\
+ rendition.texi\
+ snapshot.texi\
+ sparse.texi\
+ value.texi
+
+EXTRA_DIST = gendocs_template mastermenu.el texify.sed untabify.el
+
+# The rendering level is anyone of PUBLISH, DISTRIB or PROOF.
+# Just call `make RENDITION=PROOF [target]' if you want PROOF rendition.
+RENDITION = DISTRIB
+MAKEINFOFLAGS = -D$(RENDITION)
+GENDOCS = gendocs.sh
+TEXI2DVI = texi2dvi -t '@set $(RENDITION)' -E
+all: all-am
+
+.SUFFIXES:
+.SUFFIXES: .dvi .html .info .pdf .ps .texi
+$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
+	@for dep in $?; do \
+	  case '$(am__configure_deps)' in \
+	    *$$dep*) \
+	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
+	        && { if test -f $@; then exit 0; else break; fi; }; \
+	      exit 1;; \
+	  esac; \
+	done; \
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnits doc/Makefile'; \
+	$(am__cd) $(top_srcdir) && \
+	  $(AUTOMAKE) --gnits doc/Makefile
+.PRECIOUS: Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+	@case '$?' in \
+	  *config.status*) \
+	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+	  *) \
+	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
+	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
+	esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure:  $(am__configure_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
+
+.texi.info:
+	restore=: && backupdir="$(am__leading_dot)am$$$$" && \
+	am__cwd=`pwd` && $(am__cd) $(srcdir) && \
+	rm -rf $$backupdir && mkdir $$backupdir && \
+	if ($(MAKEINFO) --version) >/dev/null 2>&1; then \
+	  for f in $@ $@-[0-9] $@-[0-9][0-9] $(@:.info=).i[0-9] $(@:.info=).i[0-9][0-9]; do \
+	    if test -f $$f; then mv $$f $$backupdir; restore=mv; else :; fi; \
+	  done; \
+	else :; fi && \
+	cd "$$am__cwd"; \
+	if $(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir) \
+	 -o $@ $<; \
+	then \
+	  rc=0; \
+	  $(am__cd) $(srcdir); \
+	else \
+	  rc=$$?; \
+	  $(am__cd) $(srcdir) && \
+	  $$restore $$backupdir/* `echo "./$@" | sed 's|[^/]*$$||'`; \
+	fi; \
+	rm -rf $$backupdir; exit $$rc
+
+.texi.dvi:
+	TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
+	MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir)' \
+	$(TEXI2DVI) $<
+
+.texi.pdf:
+	TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
+	MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir)' \
+	$(TEXI2PDF) $<
+
+.texi.html:
+	rm -rf $(@:.html=.htp)
+	if $(MAKEINFOHTML) $(AM_MAKEINFOHTMLFLAGS) $(MAKEINFOFLAGS) -I $(srcdir) \
+	 -o $(@:.html=.htp) $<; \
+	then \
+	  rm -rf $@; \
+	  if test ! -d $(@:.html=.htp) && test -d $(@:.html=); then \
+	    mv $(@:.html=) $@; else mv $(@:.html=.htp) $@; fi; \
+	else \
+	  if test ! -d $(@:.html=.htp) && test -d $(@:.html=); then \
+	    rm -rf $(@:.html=); else rm -Rf $(@:.html=.htp) $@; fi; \
+	  exit 1; \
+	fi
+$(srcdir)/tar.info: tar.texi $(srcdir)/version.texi $(tar_TEXINFOS)
+tar.dvi: tar.texi $(srcdir)/version.texi $(tar_TEXINFOS)
+tar.pdf: tar.texi $(srcdir)/version.texi $(tar_TEXINFOS)
+tar.html: tar.texi $(srcdir)/version.texi $(tar_TEXINFOS)
+$(srcdir)/version.texi:  $(srcdir)/stamp-vti
+$(srcdir)/stamp-vti: tar.texi $(top_srcdir)/configure
+	@(dir=.; test -f ./tar.texi || dir=$(srcdir); \
+	set `$(SHELL) $(top_srcdir)/build-aux/mdate-sh $$dir/tar.texi`; \
+	echo "@set UPDATED $$1 $$2 $$3"; \
+	echo "@set UPDATED-MONTH $$2 $$3"; \
+	echo "@set EDITION $(VERSION)"; \
+	echo "@set VERSION $(VERSION)") > vti.tmp
+	@cmp -s vti.tmp $(srcdir)/version.texi \
+	  || (echo "Updating $(srcdir)/version.texi"; \
+	      cp vti.tmp $(srcdir)/version.texi)
+	-@rm -f vti.tmp
+	@cp $(srcdir)/version.texi $@
+
+mostlyclean-vti:
+	-rm -f vti.tmp
+
+maintainer-clean-vti:
+	-rm -f $(srcdir)/stamp-vti $(srcdir)/version.texi
+.dvi.ps:
+	TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
+	$(DVIPS) -o $@ $<
+
+uninstall-dvi-am:
+	@$(NORMAL_UNINSTALL)
+	@list='$(DVIS)'; test -n "$(dvidir)" || list=; \
+	for p in $$list; do \
+	  $(am__strip_dir) \
+	  echo " rm -f '$(DESTDIR)$(dvidir)/$$f'"; \
+	  rm -f "$(DESTDIR)$(dvidir)/$$f"; \
+	done
+
+uninstall-html-am:
+	@$(NORMAL_UNINSTALL)
+	@list='$(HTMLS)'; test -n "$(htmldir)" || list=; \
+	for p in $$list; do \
+	  $(am__strip_dir) \
+	  echo " rm -rf '$(DESTDIR)$(htmldir)/$$f'"; \
+	  rm -rf "$(DESTDIR)$(htmldir)/$$f"; \
+	done
+
+uninstall-info-am:
+	@$(PRE_UNINSTALL)
+	@if test -d '$(DESTDIR)$(infodir)' && \
+	    (install-info --version && \
+	     install-info --version 2>&1 | sed 1q | grep -i -v debian) >/dev/null 2>&1; then \
+	  list='$(INFO_DEPS)'; \
+	  for file in $$list; do \
+	    relfile=`echo "$$file" | sed 's|^.*/||'`; \
+	    echo " install-info --info-dir='$(DESTDIR)$(infodir)' --remove '$(DESTDIR)$(infodir)/$$relfile'"; \
+	    if install-info --info-dir="$(DESTDIR)$(infodir)" --remove "$(DESTDIR)$(infodir)/$$relfile"; \
+	    then :; else test ! -f "$(DESTDIR)$(infodir)/$$relfile" || exit 1; fi; \
+	  done; \
+	else :; fi
+	@$(NORMAL_UNINSTALL)
+	@list='$(INFO_DEPS)'; \
+	for file in $$list; do \
+	  relfile=`echo "$$file" | sed 's|^.*/||'`; \
+	  relfile_i=`echo "$$relfile" | sed 's|\.info$$||;s|$$|.i|'`; \
+	  (if test -d "$(DESTDIR)$(infodir)" && cd "$(DESTDIR)$(infodir)"; then \
+	     echo " cd '$(DESTDIR)$(infodir)' && rm -f $$relfile $$relfile-[0-9] $$relfile-[0-9][0-9] $$relfile_i[0-9] $$relfile_i[0-9][0-9]"; \
+	     rm -f $$relfile $$relfile-[0-9] $$relfile-[0-9][0-9] $$relfile_i[0-9] $$relfile_i[0-9][0-9]; \
+	   else :; fi); \
+	done
+
+uninstall-pdf-am:
+	@$(NORMAL_UNINSTALL)
+	@list='$(PDFS)'; test -n "$(pdfdir)" || list=; \
+	for p in $$list; do \
+	  $(am__strip_dir) \
+	  echo " rm -f '$(DESTDIR)$(pdfdir)/$$f'"; \
+	  rm -f "$(DESTDIR)$(pdfdir)/$$f"; \
+	done
+
+uninstall-ps-am:
+	@$(NORMAL_UNINSTALL)
+	@list='$(PSS)'; test -n "$(psdir)" || list=; \
+	for p in $$list; do \
+	  $(am__strip_dir) \
+	  echo " rm -f '$(DESTDIR)$(psdir)/$$f'"; \
+	  rm -f "$(DESTDIR)$(psdir)/$$f"; \
+	done
+
+dist-info: $(INFO_DEPS)
+	@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
+	list='$(INFO_DEPS)'; \
+	for base in $$list; do \
+	  case $$base in \
+	    $(srcdir)/*) base=`echo "$$base" | sed "s|^$$srcdirstrip/||"`;; \
+	  esac; \
+	  if test -f $$base; then d=.; else d=$(srcdir); fi; \
+	  base_i=`echo "$$base" | sed 's|\.info$$||;s|$$|.i|'`; \
+	  for file in $$d/$$base $$d/$$base-[0-9] $$d/$$base-[0-9][0-9] $$d/$$base_i[0-9] $$d/$$base_i[0-9][0-9]; do \
+	    if test -f $$file; then \
+	      relfile=`expr "$$file" : "$$d/\(.*\)"`; \
+	      test -f "$(distdir)/$$relfile" || \
+		cp -p $$file "$(distdir)/$$relfile"; \
+	    else :; fi; \
+	  done; \
+	done
+
+mostlyclean-aminfo:
+	-rm -rf tar.aux tar.cp tar.cps tar.fn tar.kw tar.ky tar.log tar.op tar.ops \
+	  tar.pg tar.tmp tar.toc tar.tp tar.tps tar.vr
+
+clean-aminfo:
+	-test -z "tar.dvi tar.pdf tar.ps tar.html" \
+	|| rm -rf tar.dvi tar.pdf tar.ps tar.html
+
+maintainer-clean-aminfo:
+	@list='$(INFO_DEPS)'; for i in $$list; do \
+	  i_i=`echo "$$i" | sed 's|\.info$$||;s|$$|.i|'`; \
+	  echo " rm -f $$i $$i-[0-9] $$i-[0-9][0-9] $$i_i[0-9] $$i_i[0-9][0-9]"; \
+	  rm -f $$i $$i-[0-9] $$i-[0-9][0-9] $$i_i[0-9] $$i_i[0-9][0-9]; \
+	done
+tags: TAGS
+TAGS:
+
+ctags: CTAGS
+CTAGS:
+
+
+distdir: $(DISTFILES)
+	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	list='$(DISTFILES)'; \
+	  dist_files=`for file in $$list; do echo $$file; done | \
+	  sed -e "s|^$$srcdirstrip/||;t" \
+	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+	case $$dist_files in \
+	  */*) $(MKDIR_P) `echo "$$dist_files" | \
+			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+			   sort -u` ;; \
+	esac; \
+	for file in $$dist_files; do \
+	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+	  if test -d $$d/$$file; then \
+	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d "$(distdir)/$$file"; then \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
+	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
+	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
+	  else \
+	    test -f "$(distdir)/$$file" \
+	    || cp -p $$d/$$file "$(distdir)/$$file" \
+	    || exit 1; \
+	  fi; \
+	done
+	$(MAKE) $(AM_MAKEFLAGS) \
+	  top_distdir="$(top_distdir)" distdir="$(distdir)" \
+	  dist-info
+check-am: all-am
+check: check-am
+all-am: Makefile $(INFO_DEPS)
+installdirs:
+	for dir in "$(DESTDIR)$(infodir)"; do \
+	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
+	done
+install: install-am
+install-exec: install-exec-am
+install-data: install-data-am
+uninstall: uninstall-am
+
+install-am: all-am
+	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-am
+install-strip:
+	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	  `test -z '$(STRIP)' || \
+	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
+
+maintainer-clean-generic:
+	@echo "This command is intended for maintainers to use"
+	@echo "it deletes files that may require special tools to rebuild."
+clean: clean-am
+
+clean-am: clean-aminfo clean-generic clean-local mostlyclean-am
+
+distclean: distclean-am
+	-rm -f Makefile
+distclean-am: clean-am distclean-generic
+
+dvi: dvi-am
+
+dvi-am: $(DVIS)
+
+html: html-am
+
+html-am: $(HTMLS)
+
+info: info-am
+
+info-am: $(INFO_DEPS)
+
+install-data-am: install-info-am
+
+install-dvi: install-dvi-am
+
+install-dvi-am: $(DVIS)
+	@$(NORMAL_INSTALL)
+	test -z "$(dvidir)" || $(MKDIR_P) "$(DESTDIR)$(dvidir)"
+	@list='$(DVIS)'; test -n "$(dvidir)" || list=; \
+	for p in $$list; do \
+	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
+	  echo "$$d$$p"; \
+	done | $(am__base_list) | \
+	while read files; do \
+	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(dvidir)'"; \
+	  $(INSTALL_DATA) $$files "$(DESTDIR)$(dvidir)" || exit $$?; \
+	done
+install-exec-am:
+
+install-html: install-html-am
+
+install-html-am: $(HTMLS)
+	@$(NORMAL_INSTALL)
+	test -z "$(htmldir)" || $(MKDIR_P) "$(DESTDIR)$(htmldir)"
+	@list='$(HTMLS)'; list2=; test -n "$(htmldir)" || list=; \
+	for p in $$list; do \
+	  if test -f "$$p" || test -d "$$p"; then d=; else d="$(srcdir)/"; fi; \
+	  $(am__strip_dir) \
+	  if test -d "$$d$$p"; then \
+	    echo " $(MKDIR_P) '$(DESTDIR)$(htmldir)/$$f'"; \
+	    $(MKDIR_P) "$(DESTDIR)$(htmldir)/$$f" || exit 1; \
+	    echo " $(INSTALL_DATA) '$$d$$p'/* '$(DESTDIR)$(htmldir)/$$f'"; \
+	    $(INSTALL_DATA) "$$d$$p"/* "$(DESTDIR)$(htmldir)/$$f" || exit $$?; \
+	  else \
+	    list2="$$list2 $$d$$p"; \
+	  fi; \
+	done; \
+	test -z "$$list2" || { echo "$$list2" | $(am__base_list) | \
+	while read files; do \
+	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(htmldir)'"; \
+	  $(INSTALL_DATA) $$files "$(DESTDIR)$(htmldir)" || exit $$?; \
+	done; }
+install-info: install-info-am
+
+install-info-am: $(INFO_DEPS)
+	@$(NORMAL_INSTALL)
+	test -z "$(infodir)" || $(MKDIR_P) "$(DESTDIR)$(infodir)"
+	@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
+	list='$(INFO_DEPS)'; test -n "$(infodir)" || list=; \
+	for file in $$list; do \
+	  case $$file in \
+	    $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
+	  esac; \
+	  if test -f $$file; then d=.; else d=$(srcdir); fi; \
+	  file_i=`echo "$$file" | sed 's|\.info$$||;s|$$|.i|'`; \
+	  for ifile in $$d/$$file $$d/$$file-[0-9] $$d/$$file-[0-9][0-9] \
+	               $$d/$$file_i[0-9] $$d/$$file_i[0-9][0-9] ; do \
+	    if test -f $$ifile; then \
+	      echo "$$ifile"; \
+	    else : ; fi; \
+	  done; \
+	done | $(am__base_list) | \
+	while read files; do \
+	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(infodir)'"; \
+	  $(INSTALL_DATA) $$files "$(DESTDIR)$(infodir)" || exit $$?; done
+	@$(POST_INSTALL)
+	@if (install-info --version && \
+	     install-info --version 2>&1 | sed 1q | grep -i -v debian) >/dev/null 2>&1; then \
+	  list='$(INFO_DEPS)'; test -n "$(infodir)" || list=; \
+	  for file in $$list; do \
+	    relfile=`echo "$$file" | sed 's|^.*/||'`; \
+	    echo " install-info --info-dir='$(DESTDIR)$(infodir)' '$(DESTDIR)$(infodir)/$$relfile'";\
+	    install-info --info-dir="$(DESTDIR)$(infodir)" "$(DESTDIR)$(infodir)/$$relfile" || :;\
+	  done; \
+	else : ; fi
+install-man:
+
+install-pdf: install-pdf-am
+
+install-pdf-am: $(PDFS)
+	@$(NORMAL_INSTALL)
+	test -z "$(pdfdir)" || $(MKDIR_P) "$(DESTDIR)$(pdfdir)"
+	@list='$(PDFS)'; test -n "$(pdfdir)" || list=; \
+	for p in $$list; do \
+	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
+	  echo "$$d$$p"; \
+	done | $(am__base_list) | \
+	while read files; do \
+	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pdfdir)'"; \
+	  $(INSTALL_DATA) $$files "$(DESTDIR)$(pdfdir)" || exit $$?; done
+install-ps: install-ps-am
+
+install-ps-am: $(PSS)
+	@$(NORMAL_INSTALL)
+	test -z "$(psdir)" || $(MKDIR_P) "$(DESTDIR)$(psdir)"
+	@list='$(PSS)'; test -n "$(psdir)" || list=; \
+	for p in $$list; do \
+	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
+	  echo "$$d$$p"; \
+	done | $(am__base_list) | \
+	while read files; do \
+	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(psdir)'"; \
+	  $(INSTALL_DATA) $$files "$(DESTDIR)$(psdir)" || exit $$?; done
+installcheck-am:
+
+maintainer-clean: maintainer-clean-am
+	-rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-aminfo \
+	maintainer-clean-generic maintainer-clean-vti
+
+mostlyclean: mostlyclean-am
+
+mostlyclean-am: mostlyclean-aminfo mostlyclean-generic mostlyclean-vti
+
+pdf: pdf-am
+
+pdf-am: $(PDFS)
+
+ps: ps-am
+
+ps-am: $(PSS)
+
+uninstall-am: uninstall-dvi-am uninstall-html-am uninstall-info-am \
+	uninstall-pdf-am uninstall-ps-am
+
+.MAKE: install-am install-strip
+
+.PHONY: all all-am check check-am clean clean-aminfo clean-generic \
+	clean-local dist-info distclean distclean-generic distdir dvi \
+	dvi-am html html-am info info-am install install-am \
+	install-data install-data-am install-dvi install-dvi-am \
+	install-exec install-exec-am install-html install-html-am \
+	install-info install-info-am install-man install-pdf \
+	install-pdf-am install-ps install-ps-am install-strip \
+	installcheck installcheck-am installdirs maintainer-clean \
+	maintainer-clean-aminfo maintainer-clean-generic \
+	maintainer-clean-vti mostlyclean mostlyclean-aminfo \
+	mostlyclean-generic mostlyclean-vti pdf pdf-am ps ps-am \
+	uninstall uninstall-am uninstall-dvi-am uninstall-html-am \
+	uninstall-info-am uninstall-pdf-am uninstall-ps-am
+
+
+header.texi: $(top_srcdir)/src/tar.h
+	sed -f $(srcdir)/texify.sed $(top_srcdir)/src/tar.h \
+	  | expand >$@
+
+master-menu: $(tar_TEXINFOS)
+	emacs -batch -l mastermenu.el -f make-master-menu $(info_TEXINFOS)
+
+untabify:
+	emacs -batch -l untabify.el $(info_TEXINFOS) $(tar_TEXINFOS)
+
+final: untabify master-menu
+
+# Checking
+check-format:
+	@if test -n "`cat $(info_TEXINFOS) $(tar_TEXINFOS) | tr -d -c '\t'`"; then \
+		echo "Sources contain tabs; run make untabify"; \
+		false; \
+	fi
+
+check-options:
+	@ARGP_HELP_FMT='usage-indent=0,short-opt-col=0,long-opt-col=0,doc-opt-col=0,opt-doc-col=0,header-col=0,rmargin=1' \
+	$(top_builddir)/src/tar --usage | \
+	sed -n 's/^\[--\([^]\=\[]*\).*/\1/p' | sort | uniq > opts.$$$$;\
+	$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir) -E - \
+            $(info_TEXINFOS) | \
+	sed -n '/^@macro/,/^@end macro/d;s/@opindex *\([^@,]*\).*/\1/p' \
+	     | sort | uniq > docs.$$$$;\
+	status=0;\
+	join -v1 opts.$$$$ docs.$$$$ > report.$$$$;\
+	if test -s report.$$$$; then \
+          echo 'Not documented options:'; \
+          cat report.$$$$; \
+          status=1; \
+        fi; \
+	join -v2 opts.$$$$ docs.$$$$ > report.$$$$;\
+	if test -s report.$$$$; then \
+	  echo 'Non-existing options:';\
+          cat report.$$$$; \
+          status=1; \
+        fi; \
+	rm opts.$$$$ docs.$$$$ report.$$$$;\
+	test $$status -ne 0 && exit $$status
+
+check-refs:
+	@for file in $(info_TEXINFOS) $(tar_TEXINFOS); \
+	do \
+	  sed -e = $$file | \
+           sed -n 'N;/@FIXME-.*ref/{s/\(^[0-9][0-9]*\).*@FIXME-.*ref{\([^}]*\).*/'$$file':\1: \2/gp}'; \
+	done > $@-t; \
+	if [ -s $@-t ]; then \
+	  echo "Unresolved cross-references:"; \
+	  cat $@-t;\
+	  rm $@-t; \
+	else \
+	  rm -f $@-t; \
+	fi
+
+check-fixmes:
+	@for file in $(info_TEXINFOS); \
+	do \
+	  sed -e = $$file | \
+           sed -n 'N;/@FIXME{/{s/\(^[0-9][0-9]*\).*@FIXME{\([^}]*\).*/'$$file':\1: \2/gp}'; \
+	done > $@-t; \
+	if [ -s $@-t ]; then \
+	  echo "Unresolved FIXMEs:"; \
+	  cat $@-t; \
+	  rm $@-t; \
+	  false; \
+	else \
+          rm -f $@-t; \
+	fi
+
+check-unrevised:
+	@grep -Hn @UNREVISED $(info_TEXINFOS) > $@-t; \
+	if [ -s $@-t ]; then \
+	  echo "Unrevised nodes:"; \
+	  cat $@-t; \
+	  rm $@-t; \
+	  false;\
+	else \
+          rm $@-t; \
+	fi
+
+all-check-docs: check-format check-options check-refs check-fixmes check-unrevised
+
+check-docs:
+	$(MAKE) -k all-check-docs
+
+#
+
+clean-local:
+	rm -rf manual
+
+# Make sure you set TEXINPUTS
+# Usual value is:
+# /usr/share/texmf/pdftex/plain/misc:/usr/share/texmf/pdftex/config
+manual:
+	TEXINPUTS=$(srcdir):$(top_srcdir)/build-tex:$(TEXINPUTS) \
+	 MAKEINFO="$(MAKEINFO) $(MAKEINFOFLAGS)" \
+	 TEXI2DVI="$(TEXI2DVI) -t @finalout" \
+	$(GENDOCS) --texi2html tar 'GNU tar manual'
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff -Naur tar-1.26.orig/doc/tar.1 tar-1.26/doc/tar.1
--- tar-1.26.orig/doc/tar.1	1970-01-01 00:00:00.000000000 +0000
+++ tar-1.26/doc/tar.1	2011-05-18 17:55:36.872098438 +0000
@@ -0,0 +1,366 @@
+.\" generated by script on Sat Jan  8 16:53:11 2011
+.Dd Jan  8, 2011
+.Dt TAR 1
+.Sh NAME
+.Nm tar
+.Nd The GNU version of the tar archiving utility
+.Sh SYNOPSIS
+.Nm tar
+.Oo Fl Oc Cm A Fl \-catenate \-concatenate Cm \||\| c Fl \-create Cm \||\| d Fl \-diff \-compare Cm \||\| Fl \-delete Cm \||\| r Fl \-append Cm \||\| t Fl \-list Cm \||\| Fl \-test\-label Cm \||\| u Fl \-update Cm \||\| x Fl \-extract \-get
+.Op Ar options
+.Op Ar pathname ...
+.Sh DESCRIPTION
+.Nm Tar
+stores and extracts files from a tape or disk archive.
+.Pp
+The first argument to
+tar
+should be a function; either one of the letters
+.Cm Acdrtux ,
+or one of the long function names.
+A function letter need not be prefixed with ``\-'', and may be combined
+with other single-letter options.
+A long function name must be prefixed with
+.Cm \\-\\- .
+Some options take a parameter; with the single-letter form
+these must be given as separate arguments.
+With the long form, they may be given by appending
+.Cm = Ns Ar value
+to the option.
+.Sh FUNCTION LETTERS
+Main operation mode:
+.Bl -tag -width flag
+.It Fl A , Fl \-catenate , Fl \-concatenate
+append tar files to an archive
+.It Fl c , Fl \-create
+create a new archive
+.It Fl d , Fl \-diff , Fl \-compare
+find differences between archive and file system
+.It Fl \-delete
+delete from the archive (not on mag tapes!)
+.It Fl r , Fl \-append
+append files to the end of an archive
+.It Fl t , Fl \-list
+list the contents of an archive
+.It Fl \-test\-label
+test the archive volume label and exit
+.It Fl u , Fl \-update
+only append files newer than copy in archive
+.It Fl x , Fl \-extract , Fl \-get
+extract files from an archive
+.El
+.Sh OTHER OPTIONS
+Operation modifiers:
+.Bl -tag -width flag
+.It \-[0\-7][lmh]
+specify drive and density
+.It Fl a , Fl \-auto\-compress
+use archive suffix to determine the compression program
+.It Fl \-add\-file Ns \= Ns Ar FILE
+add given FILE to the archive (useful if its name starts with a dash)
+.It Fl \-anchored
+patterns match file name start
+.It Fl \-no\-anchored
+patterns match after any `/' (default for exclusion)
+.It Fl \-atime\-preserve
+preserve access times on dumped files, either by restoring the times
+.It Fl \-no\-auto\-compress
+do not use archive suffix to determine the compression program
+.It Fl b , Fl \-blocking\-factor Ar BLOCKS
+BLOCKS x 512 bytes per record
+.It Fl B , Fl \-read\-full\-records
+reblock as we read (for 4.2BSD pipes)
+.It Fl \-backup
+backup before removal, choose version CONTROL
+.It Fl C , Fl \-directory Ar DIR
+change to directory DIR
+.It Fl \-check\-device
+check device numbers when creating incremental archives (default)
+.It Fl \-no\-check\-device
+do not check device numbers when creating incremental archives
+.It Fl \-checkpoint
+display progress messages every NUMBERth record (default 10)
+.It Fl \-checkpoint\-action Ns \= Ns Ar ACTION
+execute ACTION on each checkpoint
+.It Fl \-delay\-directory\-restore
+delay setting modification times and permissions of extracted
+.It Fl \-no\-delay\-directory\-restore
+cancel the effect of --delay-directory-restore option
+.It Fl \-exclude Ns \= Ns Ar PATTERN
+exclude files, given as a PATTERN
+.It Fl \-exclude\-backups
+exclude backup and lock files
+.It Fl \-exclude\-caches
+exclude contents of directories containing CACHEDIR.TAG, 
+.It Fl \-exclude\-caches\-all
+exclude directories containing CACHEDIR.TAG
+.It Fl \-exclude\-caches\-under
+exclude everything under directories containing CACHEDIR.TAG
+.It Fl \-exclude\-tag Ns \= Ns Ar FILE
+exclude contents of directories containing FILE, except
+.It Fl \-exclude\-tag\-all Ns \= Ns Ar FILE
+exclude directories containing FILE
+.It Fl \-exclude\-tag\-under Ns \= Ns Ar FILE
+exclude everything under directories containing FILE
+.It Fl \-exclude\-vcs
+exclude version control system directories
+.It Fl f , Fl \-file Ar ARCHIVE
+use archive file or device ARCHIVE
+.It Fl F , Fl \-info\-script , Fl \-new\-volume\-script Ar NAME
+run script at end of each tape (implies -M)
+.It Fl \-force\-local
+archive file is local even if it has a colon
+.It Fl \-full\-time
+print file time to its full resolution
+.It Fl g , Fl \-listed\-incremental Ar FILE
+handle new GNU-format incremental backup
+.It Fl G , Fl \-incremental
+handle old GNU-format incremental backup
+.It Fl \-group Ns \= Ns Ar NAME
+force NAME as group for added files
+.It Fl h , Fl \-dereference
+follow symlinks; archive and dump the files they point to
+.It Fl H , Fl \-format Ar FORMAT
+create archive of the given formatFORMAT is one of the following:
+.Bl -tag -width flag
+.It Fl \-format=gnu
+GNU tar 1.13.x format
+.It Fl \-format=oldgnu
+GNU format as per tar <= 1.12
+.It Fl \-format=pax
+POSIX 1003.1-2001 (pax) format
+.It Fl \-format=posix
+same as pax
+.It Fl \-format=ustar
+POSIX 1003.1-1988 (ustar) format
+.It Fl \-format=v7
+old V7 tar format
+.El
+.It Fl \-hard\-dereference
+follow hard links; archive and dump the files they refer to
+.It Fl i , Fl \-ignore\-zeros
+ignore zeroed blocks in archive (means EOF)
+.It Fl I , Fl \-use\-compress\-program Ar PROG
+filter through PROG (must accept -d)
+.It Fl \-ignore\-case
+ignore case
+.It Fl \-no\-ignore\-case
+case sensitive matching (default)
+.It Fl \-ignore\-command\-error
+ignore exit codes of children
+.It Fl \-no\-ignore\-command\-error
+treat non-zero exit codes of children as error
+.It Fl \-ignore\-failed\-read
+do not exit with nonzero on unreadable files
+.It Fl \-index\-file Ns \= Ns Ar FILE
+send verbose output to FILE
+.It Fl j , Fl \-bzip2
+
+.It Fl J , Fl \-xz
+
+.It Fl k , Fl \-keep\-old\-files
+don't replace existing files when extracting
+.It Fl K , Fl \-starting\-file Ar MEMBER-NAME
+begin at member MEMBER-NAME in the archive
+.It Fl \-keep\-newer\-files
+don't replace existing files that are newer than their archive copies
+.It Fl l , Fl \-check\-links
+print a message if not all links are dumped
+.It Fl L , Fl \-tape\-length Ar NUMBER
+change tape after writing NUMBER x 1024 bytes
+.It Fl \-level Ns \= Ns Ar NUMBER
+dump level for created listed-incremental archive
+.It Fl \-lzip
+
+.It Fl \-lzma
+
+.It Fl \-lzop
+
+.It Fl m , Fl \-touch
+don't extract file modified time
+.It Fl M , Fl \-multi\-volume
+create/list/extract multi-volume archive
+.It Fl \-mode Ns \= Ns Ar CHANGES
+force (symbolic) mode CHANGES for added files
+.It Fl \-mtime Ns \= Ns Ar DATE-OR-FILE
+set mtime for added files from DATE-OR-FILE
+.It Fl n , Fl \-seek
+archive is seekable
+.It Fl N , Fl \-newer , Fl \-after\-date Ar DATE-OR-FILE
+only store files newer than DATE-OR-FILE
+.It Fl \-newer\-mtime Ns \= Ns Ar DATE
+compare date and time when data changed only
+.It Fl \-null
+-T reads null-terminated names, disable -C
+.It Fl \-no\-null
+disable the effect of the previous --null option
+.It Fl \-numeric\-owner
+always use numbers for user/group names
+.It Fl O , Fl \-to\-stdout
+extract files to standard output
+.It Fl \-occurrence
+process only the NUMBERth occurrence of each file in the archive;
+.It Fl \-old\-archive , Fl \-portability
+same as --format=v7
+.It Fl \-one\-file\-system
+stay in local file system when creating archive
+.It Fl \-overwrite
+overwrite existing files when extracting
+.It Fl \-overwrite\-dir
+overwrite metadata of existing directories when extracting (default)
+.It Fl \-no\-overwrite\-dir
+preserve metadata of existing directories
+.It Fl \-owner Ns \= Ns Ar NAME
+force NAME as owner for added files
+.It Fl p , Fl \-preserve\-permissions , Fl \-same\-permissions
+extract information about file permissions (default for superuser)
+.It Fl P , Fl \-absolute\-names
+don't strip leading `/'s from file names
+.It Fl \-pax\-option Ns \= Ns Ar keyword[[:]=value][,keyword[[:]=value]]...
+control pax keywords
+.It Fl \-posix
+same as --format=posix
+.It Fl \-preserve
+same as both -p and -s
+.It Fl \-quote\-chars Ns \= Ns Ar STRING
+additionally quote characters from STRING
+.It Fl \-no\-quote\-chars Ns \= Ns Ar STRING
+disable quoting for characters from STRING
+.It Fl \-quoting\-style Ns \= Ns Ar STYLE
+set name quoting style; see below for valid STYLE values
+.It Fl R , Fl \-block\-number
+show block number within archive with each message
+.It Fl \-record\-size Ns \= Ns Ar NUMBER
+NUMBER of bytes per record, multiple of 512
+.It Fl \-recursion
+recurse into directories (default)
+.It Fl \-no\-recursion
+avoid descending automatically in directories
+.It Fl \-recursive\-unlink
+empty hierarchies prior to extracting directory
+.It Fl \-remove\-files
+remove files after adding them to the archive
+.It Fl \-restrict
+disable use of some potentially harmful options
+.It Fl \-rmt\-command Ns \= Ns Ar COMMAND
+use given rmt COMMAND instead of rmt
+.It Fl \-rsh\-command Ns \= Ns Ar COMMAND
+use remote COMMAND instead of rsh
+.It Fl s , Fl \-preserve\-order , Fl \-same\-order
+sort names to extract to match archive
+.It Fl S , Fl \-sparse
+handle sparse files efficiently
+.It Fl \-same\-owner
+try extracting files with the same ownership as exists in the archive (default for superuser)
+.It Fl \-no\-same\-owner
+extract files as yourself (default for ordinary users)
+.It Fl \-no\-same\-permissions
+apply the user's umask when extracting permissions from the archive (default for ordinary users)
+.It Fl \-no\-seek
+archive is not seekable
+.It Fl \-show\-defaults
+show tar defaults
+.It Fl \-show\-omitted\-dirs
+when listing or extracting, list each directory that does not match search criteria
+.It Fl \-show\-transformed\-names , Fl \-show\-stored\-names
+show file or archive names after transformation
+.It Fl \-sparse\-version Ns \= Ns Ar MAJOR[.MINOR]
+set version of the sparse format to use (implies --sparse)
+.It Fl \-strip\-components Ns \= Ns Ar NUMBER
+strip NUMBER leading components from file names on extraction
+.It Fl \-suffix Ns \= Ns Ar STRING
+backup before removal, override usual suffix ('~' unless overridden by environment variable SIMPLE_BACKUP_SUFFIX)
+.It Fl T , Fl \-files\-from Ar FILE
+get names to extract or create from FILE
+.It Fl \-to\-command Ns \= Ns Ar COMMAND
+pipe extracted files to another program
+.It Fl \-totals
+print total bytes after processing the archive; 
+.It Fl \-transform , Fl \-xform Ar EXPRESSION
+use sed replace EXPRESSION to transform file names
+.It Fl U , Fl \-unlink\-first
+remove each file prior to extracting over it
+.It Fl \-unquote
+unquote filenames read with -T (default)
+.It Fl \-no\-unquote
+do not unquote filenames read with -T
+.It Fl \-utc
+print file modification times in UTC
+.It Fl v , Fl \-verbose
+verbosely list files processed
+.It Fl V , Fl \-label Ar TEXT
+create archive with volume name TEXT; at list/extract time, use TEXT as a globbing pattern for volume name
+.It Fl \-volno\-file Ns \= Ns Ar FILE
+use/update the volume number in FILE
+.It Fl w , Fl \-interactive , Fl \-confirmation
+ask for confirmation for every action
+.It Fl W , Fl \-verify
+attempt to verify the archive after writing it
+.It Fl \-warning Ns \= Ns Ar KEYWORD
+warning control
+.It Fl \-wildcards
+use wildcards (default for exclusion)
+.It Fl \-wildcards\-match\-slash
+wildcards match `/' (default for exclusion)
+.It Fl \-no\-wildcards\-match\-slash
+wildcards do not match `/'
+.It Fl \-no\-wildcards
+verbatim string matching
+.It Fl X , Fl \-exclude\-from Ar FILE
+exclude patterns listed in FILE
+.It Fl z , Fl \-gzip , Fl \-gunzip Fl \-ungzip
+
+.It Fl Z , Fl \-compress , Fl \-uncompress
+
+.El
+.Sh ENVIRONMENT
+The behavior of tar is controlled by the following environment variables,
+among others:
+.Bl -tag -width Ds
+.It Ev SIMPLE_BACKUP_SUFFIX
+Backup prefix to use when extracting, if
+.Fl \-suffix
+is not specified.
+The backup suffix defaults to `~' if neither is specified.
+.It Ev TAR_OPTIONS
+Options to prepend to those specified on the command line, separated by
+whitespace.  Embedded backslashes may be used to escape whitespace or
+backslashes within an option.
+.It Ev TAPE
+Device or file to use for the archive if 
+.Fl \-file
+is not specified.
+If this environment variable is unset, use stdin or stdout instead.
+.El
+.Sh EXAMPLES
+Create archive.tar from files foo and bar.
+.Bd -literal -offset indent -compact
+tar \-cf archive.tar foo bar
+.Ed
+List all files in archive.tar verbosely.
+.Bd -literal -offset indent -compact
+tar \-tvf archive.tar
+.Ed
+Extract all files from archive.tar.
+.Bd -literal -offset indent -compact
+tar \-xf archive.tar
+.Ed
+.Sh SEE ALSO
+.\" libarchive
+.Xr tar 5 ,
+.\" man-pages
+.Xr symlink 7 ,
+.Xr rmt 8
+.Sh HISTORY
+The
+.Nm tar
+command appeared in
+.At v7 .
+.Sh BUGS
+The GNU folks, in general, abhor man pages, and create info documents instead.
+Unfortunately, the info document describing tar is licensed under the GFDL with
+invariant cover texts, which makes it impossible to include any text
+from that document in this man page.
+Most of the text in this document was automatically extracted from the usage
+text in the source.
+It may not completely describe all features of the program.