source:
patches/tar-1.26-man-1.patch@
5043f73
Last change on this file since 5043f73 was b369f3c, checked in by , 14 years ago | |
---|---|
|
|
File size: 73.9 KB |
-
doc/Makefile.am
Submitted By: Jonathan Norman <jonathan at bluesquarelinux.co.uk > Date: 2011-05-18 Initial Package Version: 1.22 Origin: Debian Upstream Status: Unknown Description: This patch adds a man page for tar generated by the perl script from debian. Rediffed: Against 1.26 by Jonathan Norman 2011-05-18 diff -Naur tar-1.26.orig/doc/Makefile.am tar-1.26/doc/Makefile.am
old new 17 17 ## along with this program; if not, write to the Free Software Foundation, 18 18 ## Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. 19 19 20 man_MANS = tar.1 20 21 info_TEXINFOS = tar.texi 21 22 tar_TEXINFOS = \ 22 23 dumpdir.texi\ -
doc/Makefile.in
diff -Naur tar-1.26.orig/doc/Makefile.in tar-1.26/doc/Makefile.in
old new 172 172 MAKEINFOHTML = $(MAKEINFO) --html 173 173 AM_MAKEINFOHTMLFLAGS = $(AM_MAKEINFOFLAGS) 174 174 DVIPS = dvips 175 am__installdirs = "$(DESTDIR)$(infodir)" 175 am__installdirs = "$(DESTDIR)$(infodir)" "$(DESTDIR)$(man1dir)" 176 176 am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; 177 177 am__vpath_adj = case $$p in \ 178 178 $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ … … 194 194 am__base_list = \ 195 195 sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ 196 196 sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' 197 man1dir = $(mandir)/man1 198 NROFF = nroff 199 MANS = $(man_MANS) 197 200 DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) 198 201 pkglibexecdir = @pkglibexecdir@ 199 202 ACLOCAL = @ACLOCAL@ … … 956 959 top_build_prefix = @top_build_prefix@ 957 960 top_builddir = @top_builddir@ 958 961 top_srcdir = @top_srcdir@ 962 man_MANS = tar.1 959 963 info_TEXINFOS = tar.texi 960 964 tar_TEXINFOS = \ 961 965 dumpdir.texi\ … … 1178 1182 echo " rm -f $$i $$i-[0-9] $$i-[0-9][0-9] $$i_i[0-9] $$i_i[0-9][0-9]"; \ 1179 1183 rm -f $$i $$i-[0-9] $$i-[0-9][0-9] $$i_i[0-9] $$i_i[0-9][0-9]; \ 1180 1184 done 1185 install-man1: $(man_MANS) 1186 @$(NORMAL_INSTALL) 1187 test -z "$(man1dir)" || $(MKDIR_P) "$(DESTDIR)$(man1dir)" 1188 @list=''; test -n "$(man1dir)" || exit 0; \ 1189 { for i in $$list; do echo "$$i"; done; \ 1190 l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \ 1191 sed -n '/\.1[a-z]*$$/p'; \ 1192 } | while read p; do \ 1193 if test -f $$p; then d=; else d="$(srcdir)/"; fi; \ 1194 echo "$$d$$p"; echo "$$p"; \ 1195 done | \ 1196 sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \ 1197 -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \ 1198 sed 'N;N;s,\n, ,g' | { \ 1199 list=; while read file base inst; do \ 1200 if test "$$base" = "$$inst"; then list="$$list $$file"; else \ 1201 echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man1dir)/$$inst'"; \ 1202 $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man1dir)/$$inst" || exit $$?; \ 1203 fi; \ 1204 done; \ 1205 for i in $$list; do echo "$$i"; done | $(am__base_list) | \ 1206 while read files; do \ 1207 test -z "$$files" || { \ 1208 echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man1dir)'"; \ 1209 $(INSTALL_DATA) $$files "$(DESTDIR)$(man1dir)" || exit $$?; }; \ 1210 done; } 1211 1212 uninstall-man1: 1213 @$(NORMAL_UNINSTALL) 1214 @list=''; test -n "$(man1dir)" || exit 0; \ 1215 files=`{ for i in $$list; do echo "$$i"; done; \ 1216 l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \ 1217 sed -n '/\.1[a-z]*$$/p'; \ 1218 } | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \ 1219 -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \ 1220 test -z "$$files" || { \ 1221 echo " ( cd '$(DESTDIR)$(man1dir)' && rm -f" $$files ")"; \ 1222 cd "$(DESTDIR)$(man1dir)" && rm -f $$files; } 1181 1223 tags: TAGS 1182 1224 TAGS: 1183 1225 … … 1186 1228 1187 1229 1188 1230 distdir: $(DISTFILES) 1231 @list='$(MANS)'; if test -n "$$list"; then \ 1232 list=`for p in $$list; do \ 1233 if test -f $$p; then d=; else d="$(srcdir)/"; fi; \ 1234 if test -f "$$d$$p"; then echo "$$d$$p"; else :; fi; done`; \ 1235 if test -n "$$list" && \ 1236 grep 'ab help2man is required to generate this page' $$list >/dev/null; then \ 1237 echo "error: found man pages containing the \`missing help2man' replacement text:" >&2; \ 1238 grep -l 'ab help2man is required to generate this page' $$list | sed 's/^/ /' >&2; \ 1239 echo " to fix them, install help2man, remove and regenerate the man pages;" >&2; \ 1240 echo " typically \`make maintainer-clean' will remove them" >&2; \ 1241 exit 1; \ 1242 else :; fi; \ 1243 else :; fi 1189 1244 @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ 1190 1245 topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ 1191 1246 list='$(DISTFILES)'; \ … … 1220 1275 dist-info 1221 1276 check-am: all-am 1222 1277 check: check-am 1223 all-am: Makefile $(INFO_DEPS) 1278 all-am: Makefile $(INFO_DEPS) $(MANS) 1224 1279 installdirs: 1225 for dir in "$(DESTDIR)$(infodir)" ; do \1280 for dir in "$(DESTDIR)$(infodir)" "$(DESTDIR)$(man1dir)"; do \ 1226 1281 test -z "$$dir" || $(MKDIR_P) "$$dir"; \ 1227 1282 done 1228 1283 install: install-am … … 1270 1325 1271 1326 info-am: $(INFO_DEPS) 1272 1327 1273 install-data-am: install-info-am 1328 install-data-am: install-info-am install-man 1274 1329 1275 1330 install-dvi: install-dvi-am 1276 1331 … … 1344 1399 install-info --info-dir="$(DESTDIR)$(infodir)" "$(DESTDIR)$(infodir)/$$relfile" || :;\ 1345 1400 done; \ 1346 1401 else : ; fi 1347 install-man: 1402 install-man: install-man1 1348 1403 1349 1404 install-pdf: install-pdf-am 1350 1405 … … 1392 1447 ps-am: $(PSS) 1393 1448 1394 1449 uninstall-am: uninstall-dvi-am uninstall-html-am uninstall-info-am \ 1395 uninstall-pdf-am uninstall-ps-am 1450 uninstall-man uninstall-pdf-am uninstall-ps-am 1451 1452 uninstall-man: uninstall-man1 1396 1453 1397 1454 .MAKE: install-am install-strip 1398 1455 … … 1401 1458 dvi-am html html-am info info-am install install-am \ 1402 1459 install-data install-data-am install-dvi install-dvi-am \ 1403 1460 install-exec install-exec-am install-html install-html-am \ 1404 install-info install-info-am install-man install-pdf \ 1405 install-pdf-am install-ps install-ps-am install-strip \ 1406 installcheck installcheck-am installdirs maintainer-clean \ 1407 maintainer-clean-aminfo maintainer-clean-generic \ 1408 maintainer-clean-vti mostlyclean mostlyclean-aminfo \ 1409 mostlyclean-generic mostlyclean-vti pdf pdf-am ps ps-am \ 1410 uninstall uninstall-am uninstall-dvi-am uninstall-html-am \ 1411 uninstall-info-am uninstall-pdf-am uninstall-ps-am 1461 install-info install-info-am install-man install-man1 \ 1462 install-pdf install-pdf-am install-ps install-ps-am \ 1463 install-strip installcheck installcheck-am installdirs \ 1464 maintainer-clean maintainer-clean-aminfo \ 1465 maintainer-clean-generic maintainer-clean-vti mostlyclean \ 1466 mostlyclean-aminfo mostlyclean-generic mostlyclean-vti pdf \ 1467 pdf-am ps ps-am uninstall uninstall-am uninstall-dvi-am \ 1468 uninstall-html-am uninstall-info-am uninstall-man \ 1469 uninstall-man1 uninstall-pdf-am uninstall-ps-am 1412 1470 1413 1471 1414 1472 header.texi: $(top_srcdir)/src/tar.h -
doc/Makefile.in.orig
diff -Naur tar-1.26.orig/doc/Makefile.in.orig tar-1.26/doc/Makefile.in.orig
old new 1 # Makefile.in generated by automake 1.11.1 from Makefile.am. 2 # @configure_input@ 3 4 # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 5 # 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, 6 # Inc. 7 # This Makefile.in is free software; the Free Software Foundation 8 # gives unlimited permission to copy and/or distribute it, 9 # with or without modifications, as long as this notice is preserved. 10 11 # This program is distributed in the hope that it will be useful, 12 # but WITHOUT ANY WARRANTY, to the extent permitted by law; without 13 # even the implied warranty of MERCHANTABILITY or FITNESS FOR A 14 # PARTICULAR PURPOSE. 15 16 @SET_MAKE@ 17 18 # Makefile for GNU tar documentation. 19 20 # Copyright (C) 1994, 1995, 1996, 1997, 1999, 2000, 2001, 2003, 2006, 21 # 2007 Free Software Foundation, Inc. 22 VPATH = @srcdir@ 23 pkgdatadir = $(datadir)/@PACKAGE@ 24 pkgincludedir = $(includedir)/@PACKAGE@ 25 pkglibdir = $(libdir)/@PACKAGE@ 26 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd 27 install_sh_DATA = $(install_sh) -c -m 644 28 install_sh_PROGRAM = $(install_sh) -c 29 install_sh_SCRIPT = $(install_sh) -c 30 INSTALL_HEADER = $(INSTALL_DATA) 31 transform = $(program_transform_name) 32 NORMAL_INSTALL = : 33 PRE_INSTALL = : 34 POST_INSTALL = : 35 NORMAL_UNINSTALL = : 36 PRE_UNINSTALL = : 37 POST_UNINSTALL = : 38 build_triplet = @build@ 39 host_triplet = @host@ 40 subdir = doc 41 DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in \ 42 $(srcdir)/stamp-vti $(srcdir)/version.texi $(tar_TEXINFOS) 43 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 44 am__aclocal_m4_deps = $(top_srcdir)/m4/00gnulib.m4 \ 45 $(top_srcdir)/m4/alloca.m4 $(top_srcdir)/m4/argmatch.m4 \ 46 $(top_srcdir)/m4/argp.m4 $(top_srcdir)/m4/backupfile.m4 \ 47 $(top_srcdir)/m4/bison.m4 $(top_srcdir)/m4/btowc.m4 \ 48 $(top_srcdir)/m4/canonicalize.m4 \ 49 $(top_srcdir)/m4/chdir-long.m4 $(top_srcdir)/m4/chown.m4 \ 50 $(top_srcdir)/m4/clock_time.m4 $(top_srcdir)/m4/cloexec.m4 \ 51 $(top_srcdir)/m4/close-stream.m4 $(top_srcdir)/m4/close.m4 \ 52 $(top_srcdir)/m4/closeout.m4 $(top_srcdir)/m4/codeset.m4 \ 53 $(top_srcdir)/m4/configmake.m4 $(top_srcdir)/m4/d-ino.m4 \ 54 $(top_srcdir)/m4/dirent-safer.m4 $(top_srcdir)/m4/dirent_h.m4 \ 55 $(top_srcdir)/m4/dirfd.m4 $(top_srcdir)/m4/dirname.m4 \ 56 $(top_srcdir)/m4/double-slash-root.m4 $(top_srcdir)/m4/dup2.m4 \ 57 $(top_srcdir)/m4/eealloc.m4 $(top_srcdir)/m4/environ.m4 \ 58 $(top_srcdir)/m4/errno_h.m4 $(top_srcdir)/m4/error.m4 \ 59 $(top_srcdir)/m4/exclude.m4 $(top_srcdir)/m4/extensions.m4 \ 60 $(top_srcdir)/m4/fchdir.m4 $(top_srcdir)/m4/fclose.m4 \ 61 $(top_srcdir)/m4/fcntl-o.m4 $(top_srcdir)/m4/fcntl.m4 \ 62 $(top_srcdir)/m4/fcntl_h.m4 $(top_srcdir)/m4/fdopendir.m4 \ 63 $(top_srcdir)/m4/fileblocks.m4 $(top_srcdir)/m4/filenamecat.m4 \ 64 $(top_srcdir)/m4/float_h.m4 $(top_srcdir)/m4/fnmatch.m4 \ 65 $(top_srcdir)/m4/fpending.m4 $(top_srcdir)/m4/fseeko.m4 \ 66 $(top_srcdir)/m4/futimens.m4 \ 67 $(top_srcdir)/m4/getcwd-abort-bug.m4 \ 68 $(top_srcdir)/m4/getcwd-path-max.m4 $(top_srcdir)/m4/getcwd.m4 \ 69 $(top_srcdir)/m4/getdelim.m4 $(top_srcdir)/m4/getdtablesize.m4 \ 70 $(top_srcdir)/m4/getline.m4 $(top_srcdir)/m4/getopt.m4 \ 71 $(top_srcdir)/m4/getpagesize.m4 $(top_srcdir)/m4/gettext.m4 \ 72 $(top_srcdir)/m4/gettime.m4 $(top_srcdir)/m4/gettimeofday.m4 \ 73 $(top_srcdir)/m4/glibc21.m4 $(top_srcdir)/m4/gnulib-common.m4 \ 74 $(top_srcdir)/m4/gnulib-comp.m4 $(top_srcdir)/m4/hash.m4 \ 75 $(top_srcdir)/m4/human.m4 $(top_srcdir)/m4/iconv.m4 \ 76 $(top_srcdir)/m4/include_next.m4 $(top_srcdir)/m4/inline.m4 \ 77 $(top_srcdir)/m4/intlmacosx.m4 $(top_srcdir)/m4/intmax_t.m4 \ 78 $(top_srcdir)/m4/inttostr.m4 $(top_srcdir)/m4/inttypes-pri.m4 \ 79 $(top_srcdir)/m4/inttypes.m4 $(top_srcdir)/m4/inttypes_h.m4 \ 80 $(top_srcdir)/m4/iswblank.m4 $(top_srcdir)/m4/langinfo_h.m4 \ 81 $(top_srcdir)/m4/lchown.m4 $(top_srcdir)/m4/lib-ld.m4 \ 82 $(top_srcdir)/m4/lib-link.m4 $(top_srcdir)/m4/lib-prefix.m4 \ 83 $(top_srcdir)/m4/libunistring-base.m4 \ 84 $(top_srcdir)/m4/link-follow.m4 $(top_srcdir)/m4/link.m4 \ 85 $(top_srcdir)/m4/linkat.m4 $(top_srcdir)/m4/localcharset.m4 \ 86 $(top_srcdir)/m4/locale-fr.m4 $(top_srcdir)/m4/locale-ja.m4 \ 87 $(top_srcdir)/m4/locale-zh.m4 $(top_srcdir)/m4/longlong.m4 \ 88 $(top_srcdir)/m4/lseek.m4 $(top_srcdir)/m4/lstat.m4 \ 89 $(top_srcdir)/m4/malloc.m4 $(top_srcdir)/m4/malloca.m4 \ 90 $(top_srcdir)/m4/mbchar.m4 $(top_srcdir)/m4/mbiter.m4 \ 91 $(top_srcdir)/m4/mbrtowc.m4 $(top_srcdir)/m4/mbsinit.m4 \ 92 $(top_srcdir)/m4/mbsrtowcs.m4 $(top_srcdir)/m4/mbstate_t.m4 \ 93 $(top_srcdir)/m4/mbtowc.m4 $(top_srcdir)/m4/memchr.m4 \ 94 $(top_srcdir)/m4/mempcpy.m4 $(top_srcdir)/m4/memrchr.m4 \ 95 $(top_srcdir)/m4/mkdir.m4 $(top_srcdir)/m4/mkdtemp.m4 \ 96 $(top_srcdir)/m4/mkfifo.m4 $(top_srcdir)/m4/mkfifoat.m4 \ 97 $(top_srcdir)/m4/mknod.m4 $(top_srcdir)/m4/mktime.m4 \ 98 $(top_srcdir)/m4/mmap-anon.m4 $(top_srcdir)/m4/mode_t.m4 \ 99 $(top_srcdir)/m4/modechange.m4 $(top_srcdir)/m4/multiarch.m4 \ 100 $(top_srcdir)/m4/nl_langinfo.m4 $(top_srcdir)/m4/nls.m4 \ 101 $(top_srcdir)/m4/open.m4 $(top_srcdir)/m4/openat.m4 \ 102 $(top_srcdir)/m4/parse-datetime.m4 $(top_srcdir)/m4/pathmax.m4 \ 103 $(top_srcdir)/m4/paxutils.m4 $(top_srcdir)/m4/po.m4 \ 104 $(top_srcdir)/m4/printf.m4 $(top_srcdir)/m4/priv-set.m4 \ 105 $(top_srcdir)/m4/progtest.m4 $(top_srcdir)/m4/quote.m4 \ 106 $(top_srcdir)/m4/quotearg.m4 $(top_srcdir)/m4/rawmemchr.m4 \ 107 $(top_srcdir)/m4/readlink.m4 $(top_srcdir)/m4/readlinkat.m4 \ 108 $(top_srcdir)/m4/realloc.m4 $(top_srcdir)/m4/regex.m4 \ 109 $(top_srcdir)/m4/rename.m4 $(top_srcdir)/m4/renameat.m4 \ 110 $(top_srcdir)/m4/rmdir.m4 $(top_srcdir)/m4/rmt.m4 \ 111 $(top_srcdir)/m4/rpmatch.m4 $(top_srcdir)/m4/rtapelib.m4 \ 112 $(top_srcdir)/m4/safe-read.m4 $(top_srcdir)/m4/safe-write.m4 \ 113 $(top_srcdir)/m4/save-cwd.m4 $(top_srcdir)/m4/savedir.m4 \ 114 $(top_srcdir)/m4/setenv.m4 $(top_srcdir)/m4/size_max.m4 \ 115 $(top_srcdir)/m4/sleep.m4 $(top_srcdir)/m4/snprintf.m4 \ 116 $(top_srcdir)/m4/ssize_t.m4 $(top_srcdir)/m4/stat-time.m4 \ 117 $(top_srcdir)/m4/stat.m4 $(top_srcdir)/m4/stdarg.m4 \ 118 $(top_srcdir)/m4/stdbool.m4 $(top_srcdir)/m4/stddef_h.m4 \ 119 $(top_srcdir)/m4/stdint.m4 $(top_srcdir)/m4/stdint_h.m4 \ 120 $(top_srcdir)/m4/stdio_h.m4 $(top_srcdir)/m4/stdlib_h.m4 \ 121 $(top_srcdir)/m4/stpcpy.m4 $(top_srcdir)/m4/strcase.m4 \ 122 $(top_srcdir)/m4/strchrnul.m4 $(top_srcdir)/m4/strdup.m4 \ 123 $(top_srcdir)/m4/strerror.m4 $(top_srcdir)/m4/string_h.m4 \ 124 $(top_srcdir)/m4/strings_h.m4 $(top_srcdir)/m4/strndup.m4 \ 125 $(top_srcdir)/m4/strnlen.m4 $(top_srcdir)/m4/strtoimax.m4 \ 126 $(top_srcdir)/m4/strtol.m4 $(top_srcdir)/m4/strtoll.m4 \ 127 $(top_srcdir)/m4/strtoul.m4 $(top_srcdir)/m4/strtoull.m4 \ 128 $(top_srcdir)/m4/strtoumax.m4 $(top_srcdir)/m4/symlink.m4 \ 129 $(top_srcdir)/m4/symlinkat.m4 $(top_srcdir)/m4/sys_stat_h.m4 \ 130 $(top_srcdir)/m4/sys_time_h.m4 $(top_srcdir)/m4/sysexits.m4 \ 131 $(top_srcdir)/m4/system.m4 $(top_srcdir)/m4/tempname.m4 \ 132 $(top_srcdir)/m4/time_h.m4 $(top_srcdir)/m4/time_r.m4 \ 133 $(top_srcdir)/m4/timespec.m4 $(top_srcdir)/m4/tm_gmtoff.m4 \ 134 $(top_srcdir)/m4/unistd-safer.m4 $(top_srcdir)/m4/unistd_h.m4 \ 135 $(top_srcdir)/m4/unlink.m4 $(top_srcdir)/m4/unlinkdir.m4 \ 136 $(top_srcdir)/m4/unlocked-io.m4 $(top_srcdir)/m4/utimbuf.m4 \ 137 $(top_srcdir)/m4/utimens.m4 $(top_srcdir)/m4/utimensat.m4 \ 138 $(top_srcdir)/m4/utimes.m4 $(top_srcdir)/m4/vasnprintf.m4 \ 139 $(top_srcdir)/m4/vasprintf.m4 $(top_srcdir)/m4/version-etc.m4 \ 140 $(top_srcdir)/m4/vsnprintf.m4 $(top_srcdir)/m4/warn-on-use.m4 \ 141 $(top_srcdir)/m4/wchar_h.m4 $(top_srcdir)/m4/wchar_t.m4 \ 142 $(top_srcdir)/m4/wcrtomb.m4 $(top_srcdir)/m4/wctype_h.m4 \ 143 $(top_srcdir)/m4/wcwidth.m4 $(top_srcdir)/m4/wint_t.m4 \ 144 $(top_srcdir)/m4/write.m4 $(top_srcdir)/m4/xalloc.m4 \ 145 $(top_srcdir)/m4/xgetcwd.m4 $(top_srcdir)/m4/xsize.m4 \ 146 $(top_srcdir)/m4/xstrndup.m4 $(top_srcdir)/m4/xstrtol.m4 \ 147 $(top_srcdir)/m4/xvasprintf.m4 $(top_srcdir)/acinclude.m4 \ 148 $(top_srcdir)/configure.ac 149 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ 150 $(ACLOCAL_M4) 151 mkinstalldirs = $(install_sh) -d 152 CONFIG_HEADER = $(top_builddir)/config.h 153 CONFIG_CLEAN_FILES = 154 CONFIG_CLEAN_VPATH_FILES = 155 AM_V_GEN = $(am__v_GEN_$(V)) 156 am__v_GEN_ = $(am__v_GEN_$(AM_DEFAULT_VERBOSITY)) 157 am__v_GEN_0 = @echo " GEN " $@; 158 AM_V_at = $(am__v_at_$(V)) 159 am__v_at_ = $(am__v_at_$(AM_DEFAULT_VERBOSITY)) 160 am__v_at_0 = @ 161 SOURCES = 162 DIST_SOURCES = 163 INFO_DEPS = $(srcdir)/tar.info 164 TEXINFO_TEX = $(top_srcdir)/build-aux/texinfo.tex 165 am__TEXINFO_TEX_DIR = $(top_srcdir)/build-aux 166 DVIS = tar.dvi 167 PDFS = tar.pdf 168 PSS = tar.ps 169 HTMLS = tar.html 170 TEXINFOS = tar.texi 171 TEXI2PDF = $(TEXI2DVI) --pdf --batch 172 MAKEINFOHTML = $(MAKEINFO) --html 173 AM_MAKEINFOHTMLFLAGS = $(AM_MAKEINFOFLAGS) 174 DVIPS = dvips 175 am__installdirs = "$(DESTDIR)$(infodir)" 176 am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; 177 am__vpath_adj = case $$p in \ 178 $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ 179 *) f=$$p;; \ 180 esac; 181 am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; 182 am__install_max = 40 183 am__nobase_strip_setup = \ 184 srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` 185 am__nobase_strip = \ 186 for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" 187 am__nobase_list = $(am__nobase_strip_setup); \ 188 for p in $$list; do echo "$$p $$p"; done | \ 189 sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ 190 $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ 191 if (++n[$$2] == $(am__install_max)) \ 192 { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ 193 END { for (dir in files) print dir, files[dir] }' 194 am__base_list = \ 195 sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ 196 sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' 197 DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) 198 pkglibexecdir = @pkglibexecdir@ 199 ACLOCAL = @ACLOCAL@ 200 ALLOCA = @ALLOCA@ 201 ALLOCA_H = @ALLOCA_H@ 202 AMTAR = @AMTAR@ 203 AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ 204 APPLE_UNIVERSAL_BUILD = @APPLE_UNIVERSAL_BUILD@ 205 AUTOCONF = @AUTOCONF@ 206 AUTOHEADER = @AUTOHEADER@ 207 AUTOM4TE = @AUTOM4TE@ 208 AUTOMAKE = @AUTOMAKE@ 209 AWK = @AWK@ 210 BACKUP_LIBEXEC_SCRIPTS = @BACKUP_LIBEXEC_SCRIPTS@ 211 BACKUP_SBIN_SCRIPTS = @BACKUP_SBIN_SCRIPTS@ 212 BACKUP_SED_COND = @BACKUP_SED_COND@ 213 BITSIZEOF_PTRDIFF_T = @BITSIZEOF_PTRDIFF_T@ 214 BITSIZEOF_SIG_ATOMIC_T = @BITSIZEOF_SIG_ATOMIC_T@ 215 BITSIZEOF_SIZE_T = @BITSIZEOF_SIZE_T@ 216 BITSIZEOF_WCHAR_T = @BITSIZEOF_WCHAR_T@ 217 BITSIZEOF_WINT_T = @BITSIZEOF_WINT_T@ 218 CC = @CC@ 219 CCDEPMODE = @CCDEPMODE@ 220 CFLAGS = @CFLAGS@ 221 CPP = @CPP@ 222 CPPFLAGS = @CPPFLAGS@ 223 CYGPATH_W = @CYGPATH_W@ 224 DEFAULT_ARCHIVE = @DEFAULT_ARCHIVE@ 225 DEFAULT_ARCHIVE_FORMAT = @DEFAULT_ARCHIVE_FORMAT@ 226 DEFAULT_BLOCKING = @DEFAULT_BLOCKING@ 227 DEFAULT_QUOTING_STYLE = @DEFAULT_QUOTING_STYLE@ 228 DEFAULT_RMT_COMMAND = @DEFAULT_RMT_COMMAND@ 229 DEFAULT_RMT_DIR = @DEFAULT_RMT_DIR@ 230 DEFS = @DEFS@ 231 DEPDIR = @DEPDIR@ 232 ECHO_C = @ECHO_C@ 233 ECHO_N = @ECHO_N@ 234 ECHO_T = @ECHO_T@ 235 EGREP = @EGREP@ 236 EMULTIHOP_HIDDEN = @EMULTIHOP_HIDDEN@ 237 EMULTIHOP_VALUE = @EMULTIHOP_VALUE@ 238 ENOLINK_HIDDEN = @ENOLINK_HIDDEN@ 239 ENOLINK_VALUE = @ENOLINK_VALUE@ 240 EOVERFLOW_HIDDEN = @EOVERFLOW_HIDDEN@ 241 EOVERFLOW_VALUE = @EOVERFLOW_VALUE@ 242 ERRNO_H = @ERRNO_H@ 243 EXEEXT = @EXEEXT@ 244 FLOAT_H = @FLOAT_H@ 245 FNMATCH_H = @FNMATCH_H@ 246 GETOPT_H = @GETOPT_H@ 247 GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@ 248 GLIBC21 = @GLIBC21@ 249 GMSGFMT = @GMSGFMT@ 250 GMSGFMT_015 = @GMSGFMT_015@ 251 GNULIB_ALPHASORT = @GNULIB_ALPHASORT@ 252 GNULIB_ATOLL = @GNULIB_ATOLL@ 253 GNULIB_BTOWC = @GNULIB_BTOWC@ 254 GNULIB_CALLOC_POSIX = @GNULIB_CALLOC_POSIX@ 255 GNULIB_CANONICALIZE_FILE_NAME = @GNULIB_CANONICALIZE_FILE_NAME@ 256 GNULIB_CHOWN = @GNULIB_CHOWN@ 257 GNULIB_CLOSE = @GNULIB_CLOSE@ 258 GNULIB_DIRFD = @GNULIB_DIRFD@ 259 GNULIB_DPRINTF = @GNULIB_DPRINTF@ 260 GNULIB_DUP2 = @GNULIB_DUP2@ 261 GNULIB_DUP3 = @GNULIB_DUP3@ 262 GNULIB_ENVIRON = @GNULIB_ENVIRON@ 263 GNULIB_EUIDACCESS = @GNULIB_EUIDACCESS@ 264 GNULIB_FACCESSAT = @GNULIB_FACCESSAT@ 265 GNULIB_FCHDIR = @GNULIB_FCHDIR@ 266 GNULIB_FCHMODAT = @GNULIB_FCHMODAT@ 267 GNULIB_FCHOWNAT = @GNULIB_FCHOWNAT@ 268 GNULIB_FCLOSE = @GNULIB_FCLOSE@ 269 GNULIB_FCNTL = @GNULIB_FCNTL@ 270 GNULIB_FDOPENDIR = @GNULIB_FDOPENDIR@ 271 GNULIB_FFLUSH = @GNULIB_FFLUSH@ 272 GNULIB_FOPEN = @GNULIB_FOPEN@ 273 GNULIB_FPRINTF = @GNULIB_FPRINTF@ 274 GNULIB_FPRINTF_POSIX = @GNULIB_FPRINTF_POSIX@ 275 GNULIB_FPURGE = @GNULIB_FPURGE@ 276 GNULIB_FPUTC = @GNULIB_FPUTC@ 277 GNULIB_FPUTS = @GNULIB_FPUTS@ 278 GNULIB_FREOPEN = @GNULIB_FREOPEN@ 279 GNULIB_FSEEK = @GNULIB_FSEEK@ 280 GNULIB_FSEEKO = @GNULIB_FSEEKO@ 281 GNULIB_FSTATAT = @GNULIB_FSTATAT@ 282 GNULIB_FSYNC = @GNULIB_FSYNC@ 283 GNULIB_FTELL = @GNULIB_FTELL@ 284 GNULIB_FTELLO = @GNULIB_FTELLO@ 285 GNULIB_FTRUNCATE = @GNULIB_FTRUNCATE@ 286 GNULIB_FUTIMENS = @GNULIB_FUTIMENS@ 287 GNULIB_FWRITE = @GNULIB_FWRITE@ 288 GNULIB_GETCWD = @GNULIB_GETCWD@ 289 GNULIB_GETDELIM = @GNULIB_GETDELIM@ 290 GNULIB_GETDOMAINNAME = @GNULIB_GETDOMAINNAME@ 291 GNULIB_GETDTABLESIZE = @GNULIB_GETDTABLESIZE@ 292 GNULIB_GETGROUPS = @GNULIB_GETGROUPS@ 293 GNULIB_GETHOSTNAME = @GNULIB_GETHOSTNAME@ 294 GNULIB_GETLINE = @GNULIB_GETLINE@ 295 GNULIB_GETLOADAVG = @GNULIB_GETLOADAVG@ 296 GNULIB_GETLOGIN = @GNULIB_GETLOGIN@ 297 GNULIB_GETLOGIN_R = @GNULIB_GETLOGIN_R@ 298 GNULIB_GETPAGESIZE = @GNULIB_GETPAGESIZE@ 299 GNULIB_GETSUBOPT = @GNULIB_GETSUBOPT@ 300 GNULIB_GETTIMEOFDAY = @GNULIB_GETTIMEOFDAY@ 301 GNULIB_GETUSERSHELL = @GNULIB_GETUSERSHELL@ 302 GNULIB_GRANTPT = @GNULIB_GRANTPT@ 303 GNULIB_IMAXABS = @GNULIB_IMAXABS@ 304 GNULIB_IMAXDIV = @GNULIB_IMAXDIV@ 305 GNULIB_ISWBLANK = @GNULIB_ISWBLANK@ 306 GNULIB_ISWCTYPE = @GNULIB_ISWCTYPE@ 307 GNULIB_LCHMOD = @GNULIB_LCHMOD@ 308 GNULIB_LCHOWN = @GNULIB_LCHOWN@ 309 GNULIB_LINK = @GNULIB_LINK@ 310 GNULIB_LINKAT = @GNULIB_LINKAT@ 311 GNULIB_LSEEK = @GNULIB_LSEEK@ 312 GNULIB_LSTAT = @GNULIB_LSTAT@ 313 GNULIB_MALLOC_POSIX = @GNULIB_MALLOC_POSIX@ 314 GNULIB_MBRLEN = @GNULIB_MBRLEN@ 315 GNULIB_MBRTOWC = @GNULIB_MBRTOWC@ 316 GNULIB_MBSCASECMP = @GNULIB_MBSCASECMP@ 317 GNULIB_MBSCASESTR = @GNULIB_MBSCASESTR@ 318 GNULIB_MBSCHR = @GNULIB_MBSCHR@ 319 GNULIB_MBSCSPN = @GNULIB_MBSCSPN@ 320 GNULIB_MBSINIT = @GNULIB_MBSINIT@ 321 GNULIB_MBSLEN = @GNULIB_MBSLEN@ 322 GNULIB_MBSNCASECMP = @GNULIB_MBSNCASECMP@ 323 GNULIB_MBSNLEN = @GNULIB_MBSNLEN@ 324 GNULIB_MBSNRTOWCS = @GNULIB_MBSNRTOWCS@ 325 GNULIB_MBSPBRK = @GNULIB_MBSPBRK@ 326 GNULIB_MBSPCASECMP = @GNULIB_MBSPCASECMP@ 327 GNULIB_MBSRCHR = @GNULIB_MBSRCHR@ 328 GNULIB_MBSRTOWCS = @GNULIB_MBSRTOWCS@ 329 GNULIB_MBSSEP = @GNULIB_MBSSEP@ 330 GNULIB_MBSSPN = @GNULIB_MBSSPN@ 331 GNULIB_MBSSTR = @GNULIB_MBSSTR@ 332 GNULIB_MBSTOK_R = @GNULIB_MBSTOK_R@ 333 GNULIB_MBTOWC = @GNULIB_MBTOWC@ 334 GNULIB_MEMCHR = @GNULIB_MEMCHR@ 335 GNULIB_MEMMEM = @GNULIB_MEMMEM@ 336 GNULIB_MEMPCPY = @GNULIB_MEMPCPY@ 337 GNULIB_MEMRCHR = @GNULIB_MEMRCHR@ 338 GNULIB_MKDIRAT = @GNULIB_MKDIRAT@ 339 GNULIB_MKDTEMP = @GNULIB_MKDTEMP@ 340 GNULIB_MKFIFO = @GNULIB_MKFIFO@ 341 GNULIB_MKFIFOAT = @GNULIB_MKFIFOAT@ 342 GNULIB_MKNOD = @GNULIB_MKNOD@ 343 GNULIB_MKNODAT = @GNULIB_MKNODAT@ 344 GNULIB_MKOSTEMP = @GNULIB_MKOSTEMP@ 345 GNULIB_MKOSTEMPS = @GNULIB_MKOSTEMPS@ 346 GNULIB_MKSTEMP = @GNULIB_MKSTEMP@ 347 GNULIB_MKSTEMPS = @GNULIB_MKSTEMPS@ 348 GNULIB_MKTIME = @GNULIB_MKTIME@ 349 GNULIB_NANOSLEEP = @GNULIB_NANOSLEEP@ 350 GNULIB_NL_LANGINFO = @GNULIB_NL_LANGINFO@ 351 GNULIB_OBSTACK_PRINTF = @GNULIB_OBSTACK_PRINTF@ 352 GNULIB_OBSTACK_PRINTF_POSIX = @GNULIB_OBSTACK_PRINTF_POSIX@ 353 GNULIB_OPEN = @GNULIB_OPEN@ 354 GNULIB_OPENAT = @GNULIB_OPENAT@ 355 GNULIB_PERROR = @GNULIB_PERROR@ 356 GNULIB_PIPE = @GNULIB_PIPE@ 357 GNULIB_PIPE2 = @GNULIB_PIPE2@ 358 GNULIB_POPEN = @GNULIB_POPEN@ 359 GNULIB_PREAD = @GNULIB_PREAD@ 360 GNULIB_PRINTF = @GNULIB_PRINTF@ 361 GNULIB_PRINTF_POSIX = @GNULIB_PRINTF_POSIX@ 362 GNULIB_PTSNAME = @GNULIB_PTSNAME@ 363 GNULIB_PUTC = @GNULIB_PUTC@ 364 GNULIB_PUTCHAR = @GNULIB_PUTCHAR@ 365 GNULIB_PUTENV = @GNULIB_PUTENV@ 366 GNULIB_PUTS = @GNULIB_PUTS@ 367 GNULIB_PWRITE = @GNULIB_PWRITE@ 368 GNULIB_RANDOM_R = @GNULIB_RANDOM_R@ 369 GNULIB_RAWMEMCHR = @GNULIB_RAWMEMCHR@ 370 GNULIB_READLINK = @GNULIB_READLINK@ 371 GNULIB_READLINKAT = @GNULIB_READLINKAT@ 372 GNULIB_REALLOC_POSIX = @GNULIB_REALLOC_POSIX@ 373 GNULIB_REALPATH = @GNULIB_REALPATH@ 374 GNULIB_REMOVE = @GNULIB_REMOVE@ 375 GNULIB_RENAME = @GNULIB_RENAME@ 376 GNULIB_RENAMEAT = @GNULIB_RENAMEAT@ 377 GNULIB_RMDIR = @GNULIB_RMDIR@ 378 GNULIB_RPMATCH = @GNULIB_RPMATCH@ 379 GNULIB_SCANDIR = @GNULIB_SCANDIR@ 380 GNULIB_SETENV = @GNULIB_SETENV@ 381 GNULIB_SLEEP = @GNULIB_SLEEP@ 382 GNULIB_SNPRINTF = @GNULIB_SNPRINTF@ 383 GNULIB_SPRINTF_POSIX = @GNULIB_SPRINTF_POSIX@ 384 GNULIB_STAT = @GNULIB_STAT@ 385 GNULIB_STDIO_H_SIGPIPE = @GNULIB_STDIO_H_SIGPIPE@ 386 GNULIB_STPCPY = @GNULIB_STPCPY@ 387 GNULIB_STPNCPY = @GNULIB_STPNCPY@ 388 GNULIB_STRCASESTR = @GNULIB_STRCASESTR@ 389 GNULIB_STRCHRNUL = @GNULIB_STRCHRNUL@ 390 GNULIB_STRDUP = @GNULIB_STRDUP@ 391 GNULIB_STRERROR = @GNULIB_STRERROR@ 392 GNULIB_STRERROR_R = @GNULIB_STRERROR_R@ 393 GNULIB_STRNCAT = @GNULIB_STRNCAT@ 394 GNULIB_STRNDUP = @GNULIB_STRNDUP@ 395 GNULIB_STRNLEN = @GNULIB_STRNLEN@ 396 GNULIB_STRPBRK = @GNULIB_STRPBRK@ 397 GNULIB_STRPTIME = @GNULIB_STRPTIME@ 398 GNULIB_STRSEP = @GNULIB_STRSEP@ 399 GNULIB_STRSIGNAL = @GNULIB_STRSIGNAL@ 400 GNULIB_STRSTR = @GNULIB_STRSTR@ 401 GNULIB_STRTOD = @GNULIB_STRTOD@ 402 GNULIB_STRTOIMAX = @GNULIB_STRTOIMAX@ 403 GNULIB_STRTOK_R = @GNULIB_STRTOK_R@ 404 GNULIB_STRTOLL = @GNULIB_STRTOLL@ 405 GNULIB_STRTOULL = @GNULIB_STRTOULL@ 406 GNULIB_STRTOUMAX = @GNULIB_STRTOUMAX@ 407 GNULIB_STRVERSCMP = @GNULIB_STRVERSCMP@ 408 GNULIB_SYMLINK = @GNULIB_SYMLINK@ 409 GNULIB_SYMLINKAT = @GNULIB_SYMLINKAT@ 410 GNULIB_SYSTEM_POSIX = @GNULIB_SYSTEM_POSIX@ 411 GNULIB_TIMEGM = @GNULIB_TIMEGM@ 412 GNULIB_TIME_R = @GNULIB_TIME_R@ 413 GNULIB_TMPFILE = @GNULIB_TMPFILE@ 414 GNULIB_TOWCTRANS = @GNULIB_TOWCTRANS@ 415 GNULIB_TTYNAME_R = @GNULIB_TTYNAME_R@ 416 GNULIB_UNISTD_H_GETOPT = @GNULIB_UNISTD_H_GETOPT@ 417 GNULIB_UNISTD_H_SIGPIPE = @GNULIB_UNISTD_H_SIGPIPE@ 418 GNULIB_UNLINK = @GNULIB_UNLINK@ 419 GNULIB_UNLINKAT = @GNULIB_UNLINKAT@ 420 GNULIB_UNLOCKPT = @GNULIB_UNLOCKPT@ 421 GNULIB_UNSETENV = @GNULIB_UNSETENV@ 422 GNULIB_USLEEP = @GNULIB_USLEEP@ 423 GNULIB_UTIMENSAT = @GNULIB_UTIMENSAT@ 424 GNULIB_VASPRINTF = @GNULIB_VASPRINTF@ 425 GNULIB_VDPRINTF = @GNULIB_VDPRINTF@ 426 GNULIB_VFPRINTF = @GNULIB_VFPRINTF@ 427 GNULIB_VFPRINTF_POSIX = @GNULIB_VFPRINTF_POSIX@ 428 GNULIB_VPRINTF = @GNULIB_VPRINTF@ 429 GNULIB_VPRINTF_POSIX = @GNULIB_VPRINTF_POSIX@ 430 GNULIB_VSNPRINTF = @GNULIB_VSNPRINTF@ 431 GNULIB_VSPRINTF_POSIX = @GNULIB_VSPRINTF_POSIX@ 432 GNULIB_WCPCPY = @GNULIB_WCPCPY@ 433 GNULIB_WCPNCPY = @GNULIB_WCPNCPY@ 434 GNULIB_WCRTOMB = @GNULIB_WCRTOMB@ 435 GNULIB_WCSCASECMP = @GNULIB_WCSCASECMP@ 436 GNULIB_WCSCAT = @GNULIB_WCSCAT@ 437 GNULIB_WCSCHR = @GNULIB_WCSCHR@ 438 GNULIB_WCSCMP = @GNULIB_WCSCMP@ 439 GNULIB_WCSCOLL = @GNULIB_WCSCOLL@ 440 GNULIB_WCSCPY = @GNULIB_WCSCPY@ 441 GNULIB_WCSCSPN = @GNULIB_WCSCSPN@ 442 GNULIB_WCSDUP = @GNULIB_WCSDUP@ 443 GNULIB_WCSLEN = @GNULIB_WCSLEN@ 444 GNULIB_WCSNCASECMP = @GNULIB_WCSNCASECMP@ 445 GNULIB_WCSNCAT = @GNULIB_WCSNCAT@ 446 GNULIB_WCSNCMP = @GNULIB_WCSNCMP@ 447 GNULIB_WCSNCPY = @GNULIB_WCSNCPY@ 448 GNULIB_WCSNLEN = @GNULIB_WCSNLEN@ 449 GNULIB_WCSNRTOMBS = @GNULIB_WCSNRTOMBS@ 450 GNULIB_WCSPBRK = @GNULIB_WCSPBRK@ 451 GNULIB_WCSRCHR = @GNULIB_WCSRCHR@ 452 GNULIB_WCSRTOMBS = @GNULIB_WCSRTOMBS@ 453 GNULIB_WCSSPN = @GNULIB_WCSSPN@ 454 GNULIB_WCSSTR = @GNULIB_WCSSTR@ 455 GNULIB_WCSTOK = @GNULIB_WCSTOK@ 456 GNULIB_WCSWIDTH = @GNULIB_WCSWIDTH@ 457 GNULIB_WCSXFRM = @GNULIB_WCSXFRM@ 458 GNULIB_WCTOB = @GNULIB_WCTOB@ 459 GNULIB_WCTOMB = @GNULIB_WCTOMB@ 460 GNULIB_WCTRANS = @GNULIB_WCTRANS@ 461 GNULIB_WCTYPE = @GNULIB_WCTYPE@ 462 GNULIB_WCWIDTH = @GNULIB_WCWIDTH@ 463 GNULIB_WMEMCHR = @GNULIB_WMEMCHR@ 464 GNULIB_WMEMCMP = @GNULIB_WMEMCMP@ 465 GNULIB_WMEMCPY = @GNULIB_WMEMCPY@ 466 GNULIB_WMEMMOVE = @GNULIB_WMEMMOVE@ 467 GNULIB_WMEMSET = @GNULIB_WMEMSET@ 468 GNULIB_WRITE = @GNULIB_WRITE@ 469 GNULIB__EXIT = @GNULIB__EXIT@ 470 GREP = @GREP@ 471 HAVE_ALPHASORT = @HAVE_ALPHASORT@ 472 HAVE_ATOLL = @HAVE_ATOLL@ 473 HAVE_BTOWC = @HAVE_BTOWC@ 474 HAVE_CANONICALIZE_FILE_NAME = @HAVE_CANONICALIZE_FILE_NAME@ 475 HAVE_CHOWN = @HAVE_CHOWN@ 476 HAVE_DECL_DIRFD = @HAVE_DECL_DIRFD@ 477 HAVE_DECL_ENVIRON = @HAVE_DECL_ENVIRON@ 478 HAVE_DECL_FCHDIR = @HAVE_DECL_FCHDIR@ 479 HAVE_DECL_FDOPENDIR = @HAVE_DECL_FDOPENDIR@ 480 HAVE_DECL_FPURGE = @HAVE_DECL_FPURGE@ 481 HAVE_DECL_FSEEKO = @HAVE_DECL_FSEEKO@ 482 HAVE_DECL_FTELLO = @HAVE_DECL_FTELLO@ 483 HAVE_DECL_GETDELIM = @HAVE_DECL_GETDELIM@ 484 HAVE_DECL_GETDOMAINNAME = @HAVE_DECL_GETDOMAINNAME@ 485 HAVE_DECL_GETLINE = @HAVE_DECL_GETLINE@ 486 HAVE_DECL_GETLOADAVG = @HAVE_DECL_GETLOADAVG@ 487 HAVE_DECL_GETLOGIN_R = @HAVE_DECL_GETLOGIN_R@ 488 HAVE_DECL_GETPAGESIZE = @HAVE_DECL_GETPAGESIZE@ 489 HAVE_DECL_GETUSERSHELL = @HAVE_DECL_GETUSERSHELL@ 490 HAVE_DECL_IMAXABS = @HAVE_DECL_IMAXABS@ 491 HAVE_DECL_IMAXDIV = @HAVE_DECL_IMAXDIV@ 492 HAVE_DECL_LOCALTIME_R = @HAVE_DECL_LOCALTIME_R@ 493 HAVE_DECL_MEMMEM = @HAVE_DECL_MEMMEM@ 494 HAVE_DECL_MEMRCHR = @HAVE_DECL_MEMRCHR@ 495 HAVE_DECL_OBSTACK_PRINTF = @HAVE_DECL_OBSTACK_PRINTF@ 496 HAVE_DECL_SETENV = @HAVE_DECL_SETENV@ 497 HAVE_DECL_SNPRINTF = @HAVE_DECL_SNPRINTF@ 498 HAVE_DECL_STRDUP = @HAVE_DECL_STRDUP@ 499 HAVE_DECL_STRERROR_R = @HAVE_DECL_STRERROR_R@ 500 HAVE_DECL_STRNCASECMP = @HAVE_DECL_STRNCASECMP@ 501 HAVE_DECL_STRNDUP = @HAVE_DECL_STRNDUP@ 502 HAVE_DECL_STRNLEN = @HAVE_DECL_STRNLEN@ 503 HAVE_DECL_STRSIGNAL = @HAVE_DECL_STRSIGNAL@ 504 HAVE_DECL_STRTOIMAX = @HAVE_DECL_STRTOIMAX@ 505 HAVE_DECL_STRTOK_R = @HAVE_DECL_STRTOK_R@ 506 HAVE_DECL_STRTOUMAX = @HAVE_DECL_STRTOUMAX@ 507 HAVE_DECL_TTYNAME_R = @HAVE_DECL_TTYNAME_R@ 508 HAVE_DECL_UNSETENV = @HAVE_DECL_UNSETENV@ 509 HAVE_DECL_VSNPRINTF = @HAVE_DECL_VSNPRINTF@ 510 HAVE_DECL_WCTOB = @HAVE_DECL_WCTOB@ 511 HAVE_DECL_WCWIDTH = @HAVE_DECL_WCWIDTH@ 512 HAVE_DPRINTF = @HAVE_DPRINTF@ 513 HAVE_DUP2 = @HAVE_DUP2@ 514 HAVE_DUP3 = @HAVE_DUP3@ 515 HAVE_EUIDACCESS = @HAVE_EUIDACCESS@ 516 HAVE_FACCESSAT = @HAVE_FACCESSAT@ 517 HAVE_FCHDIR = @HAVE_FCHDIR@ 518 HAVE_FCHMODAT = @HAVE_FCHMODAT@ 519 HAVE_FCHOWNAT = @HAVE_FCHOWNAT@ 520 HAVE_FCNTL = @HAVE_FCNTL@ 521 HAVE_FDOPENDIR = @HAVE_FDOPENDIR@ 522 HAVE_FEATURES_H = @HAVE_FEATURES_H@ 523 HAVE_FSEEKO = @HAVE_FSEEKO@ 524 HAVE_FSTATAT = @HAVE_FSTATAT@ 525 HAVE_FSYNC = @HAVE_FSYNC@ 526 HAVE_FTELLO = @HAVE_FTELLO@ 527 HAVE_FTRUNCATE = @HAVE_FTRUNCATE@ 528 HAVE_FUTIMENS = @HAVE_FUTIMENS@ 529 HAVE_GETDTABLESIZE = @HAVE_GETDTABLESIZE@ 530 HAVE_GETGROUPS = @HAVE_GETGROUPS@ 531 HAVE_GETHOSTNAME = @HAVE_GETHOSTNAME@ 532 HAVE_GETLOGIN = @HAVE_GETLOGIN@ 533 HAVE_GETOPT_H = @HAVE_GETOPT_H@ 534 HAVE_GETPAGESIZE = @HAVE_GETPAGESIZE@ 535 HAVE_GETSUBOPT = @HAVE_GETSUBOPT@ 536 HAVE_GETTIMEOFDAY = @HAVE_GETTIMEOFDAY@ 537 HAVE_GRANTPT = @HAVE_GRANTPT@ 538 HAVE_INTTYPES_H = @HAVE_INTTYPES_H@ 539 HAVE_ISWBLANK = @HAVE_ISWBLANK@ 540 HAVE_ISWCNTRL = @HAVE_ISWCNTRL@ 541 HAVE_LANGINFO_CODESET = @HAVE_LANGINFO_CODESET@ 542 HAVE_LANGINFO_ERA = @HAVE_LANGINFO_ERA@ 543 HAVE_LANGINFO_H = @HAVE_LANGINFO_H@ 544 HAVE_LANGINFO_T_FMT_AMPM = @HAVE_LANGINFO_T_FMT_AMPM@ 545 HAVE_LANGINFO_YESEXPR = @HAVE_LANGINFO_YESEXPR@ 546 HAVE_LCHMOD = @HAVE_LCHMOD@ 547 HAVE_LCHOWN = @HAVE_LCHOWN@ 548 HAVE_LINK = @HAVE_LINK@ 549 HAVE_LINKAT = @HAVE_LINKAT@ 550 HAVE_LONG_LONG_INT = @HAVE_LONG_LONG_INT@ 551 HAVE_LSTAT = @HAVE_LSTAT@ 552 HAVE_MBRLEN = @HAVE_MBRLEN@ 553 HAVE_MBRTOWC = @HAVE_MBRTOWC@ 554 HAVE_MBSINIT = @HAVE_MBSINIT@ 555 HAVE_MBSLEN = @HAVE_MBSLEN@ 556 HAVE_MBSNRTOWCS = @HAVE_MBSNRTOWCS@ 557 HAVE_MBSRTOWCS = @HAVE_MBSRTOWCS@ 558 HAVE_MEMCHR = @HAVE_MEMCHR@ 559 HAVE_MEMPCPY = @HAVE_MEMPCPY@ 560 HAVE_MKDIRAT = @HAVE_MKDIRAT@ 561 HAVE_MKDTEMP = @HAVE_MKDTEMP@ 562 HAVE_MKFIFO = @HAVE_MKFIFO@ 563 HAVE_MKFIFOAT = @HAVE_MKFIFOAT@ 564 HAVE_MKNOD = @HAVE_MKNOD@ 565 HAVE_MKNODAT = @HAVE_MKNODAT@ 566 HAVE_MKOSTEMP = @HAVE_MKOSTEMP@ 567 HAVE_MKOSTEMPS = @HAVE_MKOSTEMPS@ 568 HAVE_MKSTEMP = @HAVE_MKSTEMP@ 569 HAVE_MKSTEMPS = @HAVE_MKSTEMPS@ 570 HAVE_NANOSLEEP = @HAVE_NANOSLEEP@ 571 HAVE_NL_LANGINFO = @HAVE_NL_LANGINFO@ 572 HAVE_OPENAT = @HAVE_OPENAT@ 573 HAVE_OS_H = @HAVE_OS_H@ 574 HAVE_PIPE = @HAVE_PIPE@ 575 HAVE_PIPE2 = @HAVE_PIPE2@ 576 HAVE_PREAD = @HAVE_PREAD@ 577 HAVE_PTSNAME = @HAVE_PTSNAME@ 578 HAVE_PWRITE = @HAVE_PWRITE@ 579 HAVE_RANDOM_H = @HAVE_RANDOM_H@ 580 HAVE_RANDOM_R = @HAVE_RANDOM_R@ 581 HAVE_RAWMEMCHR = @HAVE_RAWMEMCHR@ 582 HAVE_READLINK = @HAVE_READLINK@ 583 HAVE_READLINKAT = @HAVE_READLINKAT@ 584 HAVE_REALPATH = @HAVE_REALPATH@ 585 HAVE_RENAMEAT = @HAVE_RENAMEAT@ 586 HAVE_RPMATCH = @HAVE_RPMATCH@ 587 HAVE_SCANDIR = @HAVE_SCANDIR@ 588 HAVE_SETENV = @HAVE_SETENV@ 589 HAVE_SIGNED_SIG_ATOMIC_T = @HAVE_SIGNED_SIG_ATOMIC_T@ 590 HAVE_SIGNED_WCHAR_T = @HAVE_SIGNED_WCHAR_T@ 591 HAVE_SIGNED_WINT_T = @HAVE_SIGNED_WINT_T@ 592 HAVE_SLEEP = @HAVE_SLEEP@ 593 HAVE_STDINT_H = @HAVE_STDINT_H@ 594 HAVE_STPCPY = @HAVE_STPCPY@ 595 HAVE_STPNCPY = @HAVE_STPNCPY@ 596 HAVE_STRCASECMP = @HAVE_STRCASECMP@ 597 HAVE_STRCASESTR = @HAVE_STRCASESTR@ 598 HAVE_STRCHRNUL = @HAVE_STRCHRNUL@ 599 HAVE_STRPBRK = @HAVE_STRPBRK@ 600 HAVE_STRPTIME = @HAVE_STRPTIME@ 601 HAVE_STRSEP = @HAVE_STRSEP@ 602 HAVE_STRTOD = @HAVE_STRTOD@ 603 HAVE_STRTOLL = @HAVE_STRTOLL@ 604 HAVE_STRTOULL = @HAVE_STRTOULL@ 605 HAVE_STRUCT_RANDOM_DATA = @HAVE_STRUCT_RANDOM_DATA@ 606 HAVE_STRUCT_TIMEVAL = @HAVE_STRUCT_TIMEVAL@ 607 HAVE_STRVERSCMP = @HAVE_STRVERSCMP@ 608 HAVE_SYMLINK = @HAVE_SYMLINK@ 609 HAVE_SYMLINKAT = @HAVE_SYMLINKAT@ 610 HAVE_SYSEXITS_H = @HAVE_SYSEXITS_H@ 611 HAVE_SYS_BITYPES_H = @HAVE_SYS_BITYPES_H@ 612 HAVE_SYS_INTTYPES_H = @HAVE_SYS_INTTYPES_H@ 613 HAVE_SYS_LOADAVG_H = @HAVE_SYS_LOADAVG_H@ 614 HAVE_SYS_PARAM_H = @HAVE_SYS_PARAM_H@ 615 HAVE_SYS_TIME_H = @HAVE_SYS_TIME_H@ 616 HAVE_SYS_TYPES_H = @HAVE_SYS_TYPES_H@ 617 HAVE_TIMEGM = @HAVE_TIMEGM@ 618 HAVE_UNISTD_H = @HAVE_UNISTD_H@ 619 HAVE_UNLINKAT = @HAVE_UNLINKAT@ 620 HAVE_UNLOCKPT = @HAVE_UNLOCKPT@ 621 HAVE_UNSIGNED_LONG_LONG_INT = @HAVE_UNSIGNED_LONG_LONG_INT@ 622 HAVE_USLEEP = @HAVE_USLEEP@ 623 HAVE_UTIMENSAT = @HAVE_UTIMENSAT@ 624 HAVE_VASPRINTF = @HAVE_VASPRINTF@ 625 HAVE_VDPRINTF = @HAVE_VDPRINTF@ 626 HAVE_WCHAR_H = @HAVE_WCHAR_H@ 627 HAVE_WCHAR_T = @HAVE_WCHAR_T@ 628 HAVE_WCPCPY = @HAVE_WCPCPY@ 629 HAVE_WCPNCPY = @HAVE_WCPNCPY@ 630 HAVE_WCRTOMB = @HAVE_WCRTOMB@ 631 HAVE_WCSCASECMP = @HAVE_WCSCASECMP@ 632 HAVE_WCSCAT = @HAVE_WCSCAT@ 633 HAVE_WCSCHR = @HAVE_WCSCHR@ 634 HAVE_WCSCMP = @HAVE_WCSCMP@ 635 HAVE_WCSCOLL = @HAVE_WCSCOLL@ 636 HAVE_WCSCPY = @HAVE_WCSCPY@ 637 HAVE_WCSCSPN = @HAVE_WCSCSPN@ 638 HAVE_WCSDUP = @HAVE_WCSDUP@ 639 HAVE_WCSLEN = @HAVE_WCSLEN@ 640 HAVE_WCSNCASECMP = @HAVE_WCSNCASECMP@ 641 HAVE_WCSNCAT = @HAVE_WCSNCAT@ 642 HAVE_WCSNCMP = @HAVE_WCSNCMP@ 643 HAVE_WCSNCPY = @HAVE_WCSNCPY@ 644 HAVE_WCSNLEN = @HAVE_WCSNLEN@ 645 HAVE_WCSNRTOMBS = @HAVE_WCSNRTOMBS@ 646 HAVE_WCSPBRK = @HAVE_WCSPBRK@ 647 HAVE_WCSRCHR = @HAVE_WCSRCHR@ 648 HAVE_WCSRTOMBS = @HAVE_WCSRTOMBS@ 649 HAVE_WCSSPN = @HAVE_WCSSPN@ 650 HAVE_WCSSTR = @HAVE_WCSSTR@ 651 HAVE_WCSTOK = @HAVE_WCSTOK@ 652 HAVE_WCSWIDTH = @HAVE_WCSWIDTH@ 653 HAVE_WCSXFRM = @HAVE_WCSXFRM@ 654 HAVE_WCTRANS_T = @HAVE_WCTRANS_T@ 655 HAVE_WCTYPE_H = @HAVE_WCTYPE_H@ 656 HAVE_WCTYPE_T = @HAVE_WCTYPE_T@ 657 HAVE_WINT_T = @HAVE_WINT_T@ 658 HAVE_WMEMCHR = @HAVE_WMEMCHR@ 659 HAVE_WMEMCMP = @HAVE_WMEMCMP@ 660 HAVE_WMEMCPY = @HAVE_WMEMCPY@ 661 HAVE_WMEMMOVE = @HAVE_WMEMMOVE@ 662 HAVE_WMEMSET = @HAVE_WMEMSET@ 663 HAVE__BOOL = @HAVE__BOOL@ 664 HAVE__EXIT = @HAVE__EXIT@ 665 INCLUDE_NEXT = @INCLUDE_NEXT@ 666 INCLUDE_NEXT_AS_FIRST_DIRECTIVE = @INCLUDE_NEXT_AS_FIRST_DIRECTIVE@ 667 INSTALL = @INSTALL@ 668 INSTALL_DATA = @INSTALL_DATA@ 669 INSTALL_PROGRAM = @INSTALL_PROGRAM@ 670 INSTALL_SCRIPT = @INSTALL_SCRIPT@ 671 INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ 672 INT32_MAX_LT_INTMAX_MAX = @INT32_MAX_LT_INTMAX_MAX@ 673 INT64_MAX_EQ_LONG_MAX = @INT64_MAX_EQ_LONG_MAX@ 674 INTLLIBS = @INTLLIBS@ 675 INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@ 676 LDFLAGS = @LDFLAGS@ 677 LIBGNU_LIBDEPS = @LIBGNU_LIBDEPS@ 678 LIBGNU_LTLIBDEPS = @LIBGNU_LTLIBDEPS@ 679 LIBICONV = @LIBICONV@ 680 LIBINTL = @LIBINTL@ 681 LIBOBJS = @LIBOBJS@ 682 LIBS = @LIBS@ 683 LIBUNISTRING_UNITYPES_H = @LIBUNISTRING_UNITYPES_H@ 684 LIBUNISTRING_UNIWIDTH_H = @LIBUNISTRING_UNIWIDTH_H@ 685 LIB_CLOCK_GETTIME = @LIB_CLOCK_GETTIME@ 686 LIB_SETSOCKOPT = @LIB_SETSOCKOPT@ 687 LOCALCHARSET_TESTS_ENVIRONMENT = @LOCALCHARSET_TESTS_ENVIRONMENT@ 688 LOCALE_FR = @LOCALE_FR@ 689 LOCALE_FR_UTF8 = @LOCALE_FR_UTF8@ 690 LOCALE_JA = @LOCALE_JA@ 691 LOCALE_ZH_CN = @LOCALE_ZH_CN@ 692 LTLIBICONV = @LTLIBICONV@ 693 LTLIBINTL = @LTLIBINTL@ 694 LTLIBOBJS = @LTLIBOBJS@ 695 MAKEINFO = @MAKEINFO@ 696 MKDIR_P = @MKDIR_P@ 697 MSGFMT = @MSGFMT@ 698 MSGFMT_015 = @MSGFMT_015@ 699 MSGMERGE = @MSGMERGE@ 700 NEXT_AS_FIRST_DIRECTIVE_DIRENT_H = @NEXT_AS_FIRST_DIRECTIVE_DIRENT_H@ 701 NEXT_AS_FIRST_DIRECTIVE_ERRNO_H = @NEXT_AS_FIRST_DIRECTIVE_ERRNO_H@ 702 NEXT_AS_FIRST_DIRECTIVE_FCNTL_H = @NEXT_AS_FIRST_DIRECTIVE_FCNTL_H@ 703 NEXT_AS_FIRST_DIRECTIVE_FLOAT_H = @NEXT_AS_FIRST_DIRECTIVE_FLOAT_H@ 704 NEXT_AS_FIRST_DIRECTIVE_GETOPT_H = @NEXT_AS_FIRST_DIRECTIVE_GETOPT_H@ 705 NEXT_AS_FIRST_DIRECTIVE_INTTYPES_H = @NEXT_AS_FIRST_DIRECTIVE_INTTYPES_H@ 706 NEXT_AS_FIRST_DIRECTIVE_LANGINFO_H = @NEXT_AS_FIRST_DIRECTIVE_LANGINFO_H@ 707 NEXT_AS_FIRST_DIRECTIVE_STDARG_H = @NEXT_AS_FIRST_DIRECTIVE_STDARG_H@ 708 NEXT_AS_FIRST_DIRECTIVE_STDDEF_H = @NEXT_AS_FIRST_DIRECTIVE_STDDEF_H@ 709 NEXT_AS_FIRST_DIRECTIVE_STDINT_H = @NEXT_AS_FIRST_DIRECTIVE_STDINT_H@ 710 NEXT_AS_FIRST_DIRECTIVE_STDIO_H = @NEXT_AS_FIRST_DIRECTIVE_STDIO_H@ 711 NEXT_AS_FIRST_DIRECTIVE_STDLIB_H = @NEXT_AS_FIRST_DIRECTIVE_STDLIB_H@ 712 NEXT_AS_FIRST_DIRECTIVE_STRINGS_H = @NEXT_AS_FIRST_DIRECTIVE_STRINGS_H@ 713 NEXT_AS_FIRST_DIRECTIVE_STRING_H = @NEXT_AS_FIRST_DIRECTIVE_STRING_H@ 714 NEXT_AS_FIRST_DIRECTIVE_SYSEXITS_H = @NEXT_AS_FIRST_DIRECTIVE_SYSEXITS_H@ 715 NEXT_AS_FIRST_DIRECTIVE_SYS_STAT_H = @NEXT_AS_FIRST_DIRECTIVE_SYS_STAT_H@ 716 NEXT_AS_FIRST_DIRECTIVE_SYS_TIME_H = @NEXT_AS_FIRST_DIRECTIVE_SYS_TIME_H@ 717 NEXT_AS_FIRST_DIRECTIVE_TIME_H = @NEXT_AS_FIRST_DIRECTIVE_TIME_H@ 718 NEXT_AS_FIRST_DIRECTIVE_UNISTD_H = @NEXT_AS_FIRST_DIRECTIVE_UNISTD_H@ 719 NEXT_AS_FIRST_DIRECTIVE_WCHAR_H = @NEXT_AS_FIRST_DIRECTIVE_WCHAR_H@ 720 NEXT_AS_FIRST_DIRECTIVE_WCTYPE_H = @NEXT_AS_FIRST_DIRECTIVE_WCTYPE_H@ 721 NEXT_DIRENT_H = @NEXT_DIRENT_H@ 722 NEXT_ERRNO_H = @NEXT_ERRNO_H@ 723 NEXT_FCNTL_H = @NEXT_FCNTL_H@ 724 NEXT_FLOAT_H = @NEXT_FLOAT_H@ 725 NEXT_GETOPT_H = @NEXT_GETOPT_H@ 726 NEXT_INTTYPES_H = @NEXT_INTTYPES_H@ 727 NEXT_LANGINFO_H = @NEXT_LANGINFO_H@ 728 NEXT_STDARG_H = @NEXT_STDARG_H@ 729 NEXT_STDDEF_H = @NEXT_STDDEF_H@ 730 NEXT_STDINT_H = @NEXT_STDINT_H@ 731 NEXT_STDIO_H = @NEXT_STDIO_H@ 732 NEXT_STDLIB_H = @NEXT_STDLIB_H@ 733 NEXT_STRINGS_H = @NEXT_STRINGS_H@ 734 NEXT_STRING_H = @NEXT_STRING_H@ 735 NEXT_SYSEXITS_H = @NEXT_SYSEXITS_H@ 736 NEXT_SYS_STAT_H = @NEXT_SYS_STAT_H@ 737 NEXT_SYS_TIME_H = @NEXT_SYS_TIME_H@ 738 NEXT_TIME_H = @NEXT_TIME_H@ 739 NEXT_UNISTD_H = @NEXT_UNISTD_H@ 740 NEXT_WCHAR_H = @NEXT_WCHAR_H@ 741 NEXT_WCTYPE_H = @NEXT_WCTYPE_H@ 742 OBJEXT = @OBJEXT@ 743 PACKAGE = @PACKAGE@ 744 PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ 745 PACKAGE_NAME = @PACKAGE_NAME@ 746 PACKAGE_STRING = @PACKAGE_STRING@ 747 PACKAGE_TARNAME = @PACKAGE_TARNAME@ 748 PACKAGE_VERSION = @PACKAGE_VERSION@ 749 PATH_SEPARATOR = @PATH_SEPARATOR@ 750 POSUB = @POSUB@ 751 PRAGMA_COLUMNS = @PRAGMA_COLUMNS@ 752 PRAGMA_SYSTEM_HEADER = @PRAGMA_SYSTEM_HEADER@ 753 PRIPTR_PREFIX = @PRIPTR_PREFIX@ 754 PRI_MACROS_BROKEN = @PRI_MACROS_BROKEN@ 755 PTHREAD_H_DEFINES_STRUCT_TIMESPEC = @PTHREAD_H_DEFINES_STRUCT_TIMESPEC@ 756 PTRDIFF_T_SUFFIX = @PTRDIFF_T_SUFFIX@ 757 PU_RMT_PROG = @PU_RMT_PROG@ 758 RANLIB = @RANLIB@ 759 REPLACE_BTOWC = @REPLACE_BTOWC@ 760 REPLACE_CALLOC = @REPLACE_CALLOC@ 761 REPLACE_CANONICALIZE_FILE_NAME = @REPLACE_CANONICALIZE_FILE_NAME@ 762 REPLACE_CHOWN = @REPLACE_CHOWN@ 763 REPLACE_CLOSE = @REPLACE_CLOSE@ 764 REPLACE_CLOSEDIR = @REPLACE_CLOSEDIR@ 765 REPLACE_DIRFD = @REPLACE_DIRFD@ 766 REPLACE_DPRINTF = @REPLACE_DPRINTF@ 767 REPLACE_DUP = @REPLACE_DUP@ 768 REPLACE_DUP2 = @REPLACE_DUP2@ 769 REPLACE_FCHOWNAT = @REPLACE_FCHOWNAT@ 770 REPLACE_FCLOSE = @REPLACE_FCLOSE@ 771 REPLACE_FCNTL = @REPLACE_FCNTL@ 772 REPLACE_FDOPENDIR = @REPLACE_FDOPENDIR@ 773 REPLACE_FFLUSH = @REPLACE_FFLUSH@ 774 REPLACE_FOPEN = @REPLACE_FOPEN@ 775 REPLACE_FPRINTF = @REPLACE_FPRINTF@ 776 REPLACE_FPURGE = @REPLACE_FPURGE@ 777 REPLACE_FREOPEN = @REPLACE_FREOPEN@ 778 REPLACE_FSEEK = @REPLACE_FSEEK@ 779 REPLACE_FSEEKO = @REPLACE_FSEEKO@ 780 REPLACE_FSTAT = @REPLACE_FSTAT@ 781 REPLACE_FSTATAT = @REPLACE_FSTATAT@ 782 REPLACE_FTELL = @REPLACE_FTELL@ 783 REPLACE_FTELLO = @REPLACE_FTELLO@ 784 REPLACE_FUTIMENS = @REPLACE_FUTIMENS@ 785 REPLACE_GETCWD = @REPLACE_GETCWD@ 786 REPLACE_GETDELIM = @REPLACE_GETDELIM@ 787 REPLACE_GETDOMAINNAME = @REPLACE_GETDOMAINNAME@ 788 REPLACE_GETGROUPS = @REPLACE_GETGROUPS@ 789 REPLACE_GETLINE = @REPLACE_GETLINE@ 790 REPLACE_GETLOGIN_R = @REPLACE_GETLOGIN_R@ 791 REPLACE_GETPAGESIZE = @REPLACE_GETPAGESIZE@ 792 REPLACE_GETTIMEOFDAY = @REPLACE_GETTIMEOFDAY@ 793 REPLACE_ISWBLANK = @REPLACE_ISWBLANK@ 794 REPLACE_ISWCNTRL = @REPLACE_ISWCNTRL@ 795 REPLACE_LCHOWN = @REPLACE_LCHOWN@ 796 REPLACE_LINK = @REPLACE_LINK@ 797 REPLACE_LINKAT = @REPLACE_LINKAT@ 798 REPLACE_LOCALTIME_R = @REPLACE_LOCALTIME_R@ 799 REPLACE_LSEEK = @REPLACE_LSEEK@ 800 REPLACE_LSTAT = @REPLACE_LSTAT@ 801 REPLACE_MALLOC = @REPLACE_MALLOC@ 802 REPLACE_MBRLEN = @REPLACE_MBRLEN@ 803 REPLACE_MBRTOWC = @REPLACE_MBRTOWC@ 804 REPLACE_MBSINIT = @REPLACE_MBSINIT@ 805 REPLACE_MBSNRTOWCS = @REPLACE_MBSNRTOWCS@ 806 REPLACE_MBSRTOWCS = @REPLACE_MBSRTOWCS@ 807 REPLACE_MBSTATE_T = @REPLACE_MBSTATE_T@ 808 REPLACE_MBTOWC = @REPLACE_MBTOWC@ 809 REPLACE_MEMCHR = @REPLACE_MEMCHR@ 810 REPLACE_MEMMEM = @REPLACE_MEMMEM@ 811 REPLACE_MKDIR = @REPLACE_MKDIR@ 812 REPLACE_MKFIFO = @REPLACE_MKFIFO@ 813 REPLACE_MKNOD = @REPLACE_MKNOD@ 814 REPLACE_MKSTEMP = @REPLACE_MKSTEMP@ 815 REPLACE_MKTIME = @REPLACE_MKTIME@ 816 REPLACE_NANOSLEEP = @REPLACE_NANOSLEEP@ 817 REPLACE_NL_LANGINFO = @REPLACE_NL_LANGINFO@ 818 REPLACE_NULL = @REPLACE_NULL@ 819 REPLACE_OBSTACK_PRINTF = @REPLACE_OBSTACK_PRINTF@ 820 REPLACE_OPEN = @REPLACE_OPEN@ 821 REPLACE_OPENAT = @REPLACE_OPENAT@ 822 REPLACE_OPENDIR = @REPLACE_OPENDIR@ 823 REPLACE_PERROR = @REPLACE_PERROR@ 824 REPLACE_POPEN = @REPLACE_POPEN@ 825 REPLACE_PREAD = @REPLACE_PREAD@ 826 REPLACE_PRINTF = @REPLACE_PRINTF@ 827 REPLACE_PUTENV = @REPLACE_PUTENV@ 828 REPLACE_PWRITE = @REPLACE_PWRITE@ 829 REPLACE_READLINK = @REPLACE_READLINK@ 830 REPLACE_REALLOC = @REPLACE_REALLOC@ 831 REPLACE_REALPATH = @REPLACE_REALPATH@ 832 REPLACE_REMOVE = @REPLACE_REMOVE@ 833 REPLACE_RENAME = @REPLACE_RENAME@ 834 REPLACE_RENAMEAT = @REPLACE_RENAMEAT@ 835 REPLACE_RMDIR = @REPLACE_RMDIR@ 836 REPLACE_SETENV = @REPLACE_SETENV@ 837 REPLACE_SLEEP = @REPLACE_SLEEP@ 838 REPLACE_SNPRINTF = @REPLACE_SNPRINTF@ 839 REPLACE_SPRINTF = @REPLACE_SPRINTF@ 840 REPLACE_STAT = @REPLACE_STAT@ 841 REPLACE_STDIO_WRITE_FUNCS = @REPLACE_STDIO_WRITE_FUNCS@ 842 REPLACE_STPNCPY = @REPLACE_STPNCPY@ 843 REPLACE_STRCASESTR = @REPLACE_STRCASESTR@ 844 REPLACE_STRDUP = @REPLACE_STRDUP@ 845 REPLACE_STRERROR = @REPLACE_STRERROR@ 846 REPLACE_STRERROR_R = @REPLACE_STRERROR_R@ 847 REPLACE_STRNCAT = @REPLACE_STRNCAT@ 848 REPLACE_STRNDUP = @REPLACE_STRNDUP@ 849 REPLACE_STRNLEN = @REPLACE_STRNLEN@ 850 REPLACE_STRSIGNAL = @REPLACE_STRSIGNAL@ 851 REPLACE_STRSTR = @REPLACE_STRSTR@ 852 REPLACE_STRTOD = @REPLACE_STRTOD@ 853 REPLACE_STRTOK_R = @REPLACE_STRTOK_R@ 854 REPLACE_SYMLINK = @REPLACE_SYMLINK@ 855 REPLACE_TIMEGM = @REPLACE_TIMEGM@ 856 REPLACE_TMPFILE = @REPLACE_TMPFILE@ 857 REPLACE_TTYNAME_R = @REPLACE_TTYNAME_R@ 858 REPLACE_UNLINK = @REPLACE_UNLINK@ 859 REPLACE_UNLINKAT = @REPLACE_UNLINKAT@ 860 REPLACE_UNSETENV = @REPLACE_UNSETENV@ 861 REPLACE_USLEEP = @REPLACE_USLEEP@ 862 REPLACE_UTIMENSAT = @REPLACE_UTIMENSAT@ 863 REPLACE_VASPRINTF = @REPLACE_VASPRINTF@ 864 REPLACE_VDPRINTF = @REPLACE_VDPRINTF@ 865 REPLACE_VFPRINTF = @REPLACE_VFPRINTF@ 866 REPLACE_VPRINTF = @REPLACE_VPRINTF@ 867 REPLACE_VSNPRINTF = @REPLACE_VSNPRINTF@ 868 REPLACE_VSPRINTF = @REPLACE_VSPRINTF@ 869 REPLACE_WCRTOMB = @REPLACE_WCRTOMB@ 870 REPLACE_WCSNRTOMBS = @REPLACE_WCSNRTOMBS@ 871 REPLACE_WCSRTOMBS = @REPLACE_WCSRTOMBS@ 872 REPLACE_WCSWIDTH = @REPLACE_WCSWIDTH@ 873 REPLACE_WCTOB = @REPLACE_WCTOB@ 874 REPLACE_WCTOMB = @REPLACE_WCTOMB@ 875 REPLACE_WCWIDTH = @REPLACE_WCWIDTH@ 876 REPLACE_WRITE = @REPLACE_WRITE@ 877 SET_MAKE = @SET_MAKE@ 878 SHELL = @SHELL@ 879 SIG_ATOMIC_T_SUFFIX = @SIG_ATOMIC_T_SUFFIX@ 880 SIZE_T_SUFFIX = @SIZE_T_SUFFIX@ 881 STDARG_H = @STDARG_H@ 882 STDBOOL_H = @STDBOOL_H@ 883 STDDEF_H = @STDDEF_H@ 884 STDINT_H = @STDINT_H@ 885 STRIP = @STRIP@ 886 SYSEXITS_H = @SYSEXITS_H@ 887 SYS_TIME_H_DEFINES_STRUCT_TIMESPEC = @SYS_TIME_H_DEFINES_STRUCT_TIMESPEC@ 888 TIME_H_DEFINES_STRUCT_TIMESPEC = @TIME_H_DEFINES_STRUCT_TIMESPEC@ 889 UINT32_MAX_LT_UINTMAX_MAX = @UINT32_MAX_LT_UINTMAX_MAX@ 890 UINT64_MAX_EQ_ULONG_MAX = @UINT64_MAX_EQ_ULONG_MAX@ 891 UNDEFINE_STRTOK_R = @UNDEFINE_STRTOK_R@ 892 UNISTD_H_HAVE_WINSOCK2_H = @UNISTD_H_HAVE_WINSOCK2_H@ 893 UNISTD_H_HAVE_WINSOCK2_H_AND_USE_SOCKETS = @UNISTD_H_HAVE_WINSOCK2_H_AND_USE_SOCKETS@ 894 USE_NLS = @USE_NLS@ 895 VERSION = @VERSION@ 896 WCHAR_T_SUFFIX = @WCHAR_T_SUFFIX@ 897 WINT_T_SUFFIX = @WINT_T_SUFFIX@ 898 XGETTEXT = @XGETTEXT@ 899 XGETTEXT_015 = @XGETTEXT_015@ 900 XGETTEXT_EXTRA_OPTIONS = @XGETTEXT_EXTRA_OPTIONS@ 901 YACC = @YACC@ 902 YFLAGS = @YFLAGS@ 903 abs_builddir = @abs_builddir@ 904 abs_srcdir = @abs_srcdir@ 905 abs_top_builddir = @abs_top_builddir@ 906 abs_top_srcdir = @abs_top_srcdir@ 907 ac_ct_CC = @ac_ct_CC@ 908 am__include = @am__include@ 909 am__leading_dot = @am__leading_dot@ 910 am__quote = @am__quote@ 911 am__tar = @am__tar@ 912 am__untar = @am__untar@ 913 bindir = @bindir@ 914 build = @build@ 915 build_alias = @build_alias@ 916 build_cpu = @build_cpu@ 917 build_os = @build_os@ 918 build_vendor = @build_vendor@ 919 builddir = @builddir@ 920 datadir = @datadir@ 921 datarootdir = @datarootdir@ 922 docdir = @docdir@ 923 dvidir = @dvidir@ 924 exec_prefix = @exec_prefix@ 925 gl_LIBOBJS = @gl_LIBOBJS@ 926 gl_LTLIBOBJS = @gl_LTLIBOBJS@ 927 gltests_LIBOBJS = @gltests_LIBOBJS@ 928 gltests_LTLIBOBJS = @gltests_LTLIBOBJS@ 929 gltests_WITNESS = @gltests_WITNESS@ 930 host = @host@ 931 host_alias = @host_alias@ 932 host_cpu = @host_cpu@ 933 host_os = @host_os@ 934 host_vendor = @host_vendor@ 935 htmldir = @htmldir@ 936 includedir = @includedir@ 937 infodir = @infodir@ 938 install_sh = @install_sh@ 939 libdir = @libdir@ 940 libexecdir = @libexecdir@ 941 lispdir = @lispdir@ 942 localedir = @localedir@ 943 localstatedir = @localstatedir@ 944 mandir = @mandir@ 945 mkdir_p = @mkdir_p@ 946 oldincludedir = @oldincludedir@ 947 pdfdir = @pdfdir@ 948 prefix = @prefix@ 949 program_transform_name = @program_transform_name@ 950 psdir = @psdir@ 951 sbindir = @sbindir@ 952 sharedstatedir = @sharedstatedir@ 953 srcdir = @srcdir@ 954 sysconfdir = @sysconfdir@ 955 target_alias = @target_alias@ 956 top_build_prefix = @top_build_prefix@ 957 top_builddir = @top_builddir@ 958 top_srcdir = @top_srcdir@ 959 info_TEXINFOS = tar.texi 960 tar_TEXINFOS = \ 961 dumpdir.texi\ 962 tar-snapshot-edit.texi\ 963 fdl.texi\ 964 freemanuals.texi\ 965 genfile.texi\ 966 header.texi\ 967 intern.texi\ 968 parse-datetime.texi\ 969 rendition.texi\ 970 snapshot.texi\ 971 sparse.texi\ 972 value.texi 973 974 EXTRA_DIST = gendocs_template mastermenu.el texify.sed untabify.el 975 976 # The rendering level is anyone of PUBLISH, DISTRIB or PROOF. 977 # Just call `make RENDITION=PROOF [target]' if you want PROOF rendition. 978 RENDITION = DISTRIB 979 MAKEINFOFLAGS = -D$(RENDITION) 980 GENDOCS = gendocs.sh 981 TEXI2DVI = texi2dvi -t '@set $(RENDITION)' -E 982 all: all-am 983 984 .SUFFIXES: 985 .SUFFIXES: .dvi .html .info .pdf .ps .texi 986 $(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) 987 @for dep in $?; do \ 988 case '$(am__configure_deps)' in \ 989 *$$dep*) \ 990 ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ 991 && { if test -f $@; then exit 0; else break; fi; }; \ 992 exit 1;; \ 993 esac; \ 994 done; \ 995 echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnits doc/Makefile'; \ 996 $(am__cd) $(top_srcdir) && \ 997 $(AUTOMAKE) --gnits doc/Makefile 998 .PRECIOUS: Makefile 999 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status 1000 @case '$?' in \ 1001 *config.status*) \ 1002 cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ 1003 *) \ 1004 echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ 1005 cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ 1006 esac; 1007 1008 $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) 1009 cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh 1010 1011 $(top_srcdir)/configure: $(am__configure_deps) 1012 cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh 1013 $(ACLOCAL_M4): $(am__aclocal_m4_deps) 1014 cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh 1015 $(am__aclocal_m4_deps): 1016 1017 .texi.info: 1018 restore=: && backupdir="$(am__leading_dot)am$$$$" && \ 1019 am__cwd=`pwd` && $(am__cd) $(srcdir) && \ 1020 rm -rf $$backupdir && mkdir $$backupdir && \ 1021 if ($(MAKEINFO) --version) >/dev/null 2>&1; then \ 1022 for f in $@ $@-[0-9] $@-[0-9][0-9] $(@:.info=).i[0-9] $(@:.info=).i[0-9][0-9]; do \ 1023 if test -f $$f; then mv $$f $$backupdir; restore=mv; else :; fi; \ 1024 done; \ 1025 else :; fi && \ 1026 cd "$$am__cwd"; \ 1027 if $(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir) \ 1028 -o $@ $<; \ 1029 then \ 1030 rc=0; \ 1031 $(am__cd) $(srcdir); \ 1032 else \ 1033 rc=$$?; \ 1034 $(am__cd) $(srcdir) && \ 1035 $$restore $$backupdir/* `echo "./$@" | sed 's|[^/]*$$||'`; \ 1036 fi; \ 1037 rm -rf $$backupdir; exit $$rc 1038 1039 .texi.dvi: 1040 TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \ 1041 MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir)' \ 1042 $(TEXI2DVI) $< 1043 1044 .texi.pdf: 1045 TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \ 1046 MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir)' \ 1047 $(TEXI2PDF) $< 1048 1049 .texi.html: 1050 rm -rf $(@:.html=.htp) 1051 if $(MAKEINFOHTML) $(AM_MAKEINFOHTMLFLAGS) $(MAKEINFOFLAGS) -I $(srcdir) \ 1052 -o $(@:.html=.htp) $<; \ 1053 then \ 1054 rm -rf $@; \ 1055 if test ! -d $(@:.html=.htp) && test -d $(@:.html=); then \ 1056 mv $(@:.html=) $@; else mv $(@:.html=.htp) $@; fi; \ 1057 else \ 1058 if test ! -d $(@:.html=.htp) && test -d $(@:.html=); then \ 1059 rm -rf $(@:.html=); else rm -Rf $(@:.html=.htp) $@; fi; \ 1060 exit 1; \ 1061 fi 1062 $(srcdir)/tar.info: tar.texi $(srcdir)/version.texi $(tar_TEXINFOS) 1063 tar.dvi: tar.texi $(srcdir)/version.texi $(tar_TEXINFOS) 1064 tar.pdf: tar.texi $(srcdir)/version.texi $(tar_TEXINFOS) 1065 tar.html: tar.texi $(srcdir)/version.texi $(tar_TEXINFOS) 1066 $(srcdir)/version.texi: $(srcdir)/stamp-vti 1067 $(srcdir)/stamp-vti: tar.texi $(top_srcdir)/configure 1068 @(dir=.; test -f ./tar.texi || dir=$(srcdir); \ 1069 set `$(SHELL) $(top_srcdir)/build-aux/mdate-sh $$dir/tar.texi`; \ 1070 echo "@set UPDATED $$1 $$2 $$3"; \ 1071 echo "@set UPDATED-MONTH $$2 $$3"; \ 1072 echo "@set EDITION $(VERSION)"; \ 1073 echo "@set VERSION $(VERSION)") > vti.tmp 1074 @cmp -s vti.tmp $(srcdir)/version.texi \ 1075 || (echo "Updating $(srcdir)/version.texi"; \ 1076 cp vti.tmp $(srcdir)/version.texi) 1077 -@rm -f vti.tmp 1078 @cp $(srcdir)/version.texi $@ 1079 1080 mostlyclean-vti: 1081 -rm -f vti.tmp 1082 1083 maintainer-clean-vti: 1084 -rm -f $(srcdir)/stamp-vti $(srcdir)/version.texi 1085 .dvi.ps: 1086 TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \ 1087 $(DVIPS) -o $@ $< 1088 1089 uninstall-dvi-am: 1090 @$(NORMAL_UNINSTALL) 1091 @list='$(DVIS)'; test -n "$(dvidir)" || list=; \ 1092 for p in $$list; do \ 1093 $(am__strip_dir) \ 1094 echo " rm -f '$(DESTDIR)$(dvidir)/$$f'"; \ 1095 rm -f "$(DESTDIR)$(dvidir)/$$f"; \ 1096 done 1097 1098 uninstall-html-am: 1099 @$(NORMAL_UNINSTALL) 1100 @list='$(HTMLS)'; test -n "$(htmldir)" || list=; \ 1101 for p in $$list; do \ 1102 $(am__strip_dir) \ 1103 echo " rm -rf '$(DESTDIR)$(htmldir)/$$f'"; \ 1104 rm -rf "$(DESTDIR)$(htmldir)/$$f"; \ 1105 done 1106 1107 uninstall-info-am: 1108 @$(PRE_UNINSTALL) 1109 @if test -d '$(DESTDIR)$(infodir)' && \ 1110 (install-info --version && \ 1111 install-info --version 2>&1 | sed 1q | grep -i -v debian) >/dev/null 2>&1; then \ 1112 list='$(INFO_DEPS)'; \ 1113 for file in $$list; do \ 1114 relfile=`echo "$$file" | sed 's|^.*/||'`; \ 1115 echo " install-info --info-dir='$(DESTDIR)$(infodir)' --remove '$(DESTDIR)$(infodir)/$$relfile'"; \ 1116 if install-info --info-dir="$(DESTDIR)$(infodir)" --remove "$(DESTDIR)$(infodir)/$$relfile"; \ 1117 then :; else test ! -f "$(DESTDIR)$(infodir)/$$relfile" || exit 1; fi; \ 1118 done; \ 1119 else :; fi 1120 @$(NORMAL_UNINSTALL) 1121 @list='$(INFO_DEPS)'; \ 1122 for file in $$list; do \ 1123 relfile=`echo "$$file" | sed 's|^.*/||'`; \ 1124 relfile_i=`echo "$$relfile" | sed 's|\.info$$||;s|$$|.i|'`; \ 1125 (if test -d "$(DESTDIR)$(infodir)" && cd "$(DESTDIR)$(infodir)"; then \ 1126 echo " cd '$(DESTDIR)$(infodir)' && rm -f $$relfile $$relfile-[0-9] $$relfile-[0-9][0-9] $$relfile_i[0-9] $$relfile_i[0-9][0-9]"; \ 1127 rm -f $$relfile $$relfile-[0-9] $$relfile-[0-9][0-9] $$relfile_i[0-9] $$relfile_i[0-9][0-9]; \ 1128 else :; fi); \ 1129 done 1130 1131 uninstall-pdf-am: 1132 @$(NORMAL_UNINSTALL) 1133 @list='$(PDFS)'; test -n "$(pdfdir)" || list=; \ 1134 for p in $$list; do \ 1135 $(am__strip_dir) \ 1136 echo " rm -f '$(DESTDIR)$(pdfdir)/$$f'"; \ 1137 rm -f "$(DESTDIR)$(pdfdir)/$$f"; \ 1138 done 1139 1140 uninstall-ps-am: 1141 @$(NORMAL_UNINSTALL) 1142 @list='$(PSS)'; test -n "$(psdir)" || list=; \ 1143 for p in $$list; do \ 1144 $(am__strip_dir) \ 1145 echo " rm -f '$(DESTDIR)$(psdir)/$$f'"; \ 1146 rm -f "$(DESTDIR)$(psdir)/$$f"; \ 1147 done 1148 1149 dist-info: $(INFO_DEPS) 1150 @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \ 1151 list='$(INFO_DEPS)'; \ 1152 for base in $$list; do \ 1153 case $$base in \ 1154 $(srcdir)/*) base=`echo "$$base" | sed "s|^$$srcdirstrip/||"`;; \ 1155 esac; \ 1156 if test -f $$base; then d=.; else d=$(srcdir); fi; \ 1157 base_i=`echo "$$base" | sed 's|\.info$$||;s|$$|.i|'`; \ 1158 for file in $$d/$$base $$d/$$base-[0-9] $$d/$$base-[0-9][0-9] $$d/$$base_i[0-9] $$d/$$base_i[0-9][0-9]; do \ 1159 if test -f $$file; then \ 1160 relfile=`expr "$$file" : "$$d/\(.*\)"`; \ 1161 test -f "$(distdir)/$$relfile" || \ 1162 cp -p $$file "$(distdir)/$$relfile"; \ 1163 else :; fi; \ 1164 done; \ 1165 done 1166 1167 mostlyclean-aminfo: 1168 -rm -rf tar.aux tar.cp tar.cps tar.fn tar.kw tar.ky tar.log tar.op tar.ops \ 1169 tar.pg tar.tmp tar.toc tar.tp tar.tps tar.vr 1170 1171 clean-aminfo: 1172 -test -z "tar.dvi tar.pdf tar.ps tar.html" \ 1173 || rm -rf tar.dvi tar.pdf tar.ps tar.html 1174 1175 maintainer-clean-aminfo: 1176 @list='$(INFO_DEPS)'; for i in $$list; do \ 1177 i_i=`echo "$$i" | sed 's|\.info$$||;s|$$|.i|'`; \ 1178 echo " rm -f $$i $$i-[0-9] $$i-[0-9][0-9] $$i_i[0-9] $$i_i[0-9][0-9]"; \ 1179 rm -f $$i $$i-[0-9] $$i-[0-9][0-9] $$i_i[0-9] $$i_i[0-9][0-9]; \ 1180 done 1181 tags: TAGS 1182 TAGS: 1183 1184 ctags: CTAGS 1185 CTAGS: 1186 1187 1188 distdir: $(DISTFILES) 1189 @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ 1190 topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ 1191 list='$(DISTFILES)'; \ 1192 dist_files=`for file in $$list; do echo $$file; done | \ 1193 sed -e "s|^$$srcdirstrip/||;t" \ 1194 -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ 1195 case $$dist_files in \ 1196 */*) $(MKDIR_P) `echo "$$dist_files" | \ 1197 sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ 1198 sort -u` ;; \ 1199 esac; \ 1200 for file in $$dist_files; do \ 1201 if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ 1202 if test -d $$d/$$file; then \ 1203 dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ 1204 if test -d "$(distdir)/$$file"; then \ 1205 find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ 1206 fi; \ 1207 if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ 1208 cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ 1209 find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ 1210 fi; \ 1211 cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ 1212 else \ 1213 test -f "$(distdir)/$$file" \ 1214 || cp -p $$d/$$file "$(distdir)/$$file" \ 1215 || exit 1; \ 1216 fi; \ 1217 done 1218 $(MAKE) $(AM_MAKEFLAGS) \ 1219 top_distdir="$(top_distdir)" distdir="$(distdir)" \ 1220 dist-info 1221 check-am: all-am 1222 check: check-am 1223 all-am: Makefile $(INFO_DEPS) 1224 installdirs: 1225 for dir in "$(DESTDIR)$(infodir)"; do \ 1226 test -z "$$dir" || $(MKDIR_P) "$$dir"; \ 1227 done 1228 install: install-am 1229 install-exec: install-exec-am 1230 install-data: install-data-am 1231 uninstall: uninstall-am 1232 1233 install-am: all-am 1234 @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am 1235 1236 installcheck: installcheck-am 1237 install-strip: 1238 $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ 1239 install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ 1240 `test -z '$(STRIP)' || \ 1241 echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install 1242 mostlyclean-generic: 1243 1244 clean-generic: 1245 1246 distclean-generic: 1247 -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) 1248 -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) 1249 1250 maintainer-clean-generic: 1251 @echo "This command is intended for maintainers to use" 1252 @echo "it deletes files that may require special tools to rebuild." 1253 clean: clean-am 1254 1255 clean-am: clean-aminfo clean-generic clean-local mostlyclean-am 1256 1257 distclean: distclean-am 1258 -rm -f Makefile 1259 distclean-am: clean-am distclean-generic 1260 1261 dvi: dvi-am 1262 1263 dvi-am: $(DVIS) 1264 1265 html: html-am 1266 1267 html-am: $(HTMLS) 1268 1269 info: info-am 1270 1271 info-am: $(INFO_DEPS) 1272 1273 install-data-am: install-info-am 1274 1275 install-dvi: install-dvi-am 1276 1277 install-dvi-am: $(DVIS) 1278 @$(NORMAL_INSTALL) 1279 test -z "$(dvidir)" || $(MKDIR_P) "$(DESTDIR)$(dvidir)" 1280 @list='$(DVIS)'; test -n "$(dvidir)" || list=; \ 1281 for p in $$list; do \ 1282 if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ 1283 echo "$$d$$p"; \ 1284 done | $(am__base_list) | \ 1285 while read files; do \ 1286 echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(dvidir)'"; \ 1287 $(INSTALL_DATA) $$files "$(DESTDIR)$(dvidir)" || exit $$?; \ 1288 done 1289 install-exec-am: 1290 1291 install-html: install-html-am 1292 1293 install-html-am: $(HTMLS) 1294 @$(NORMAL_INSTALL) 1295 test -z "$(htmldir)" || $(MKDIR_P) "$(DESTDIR)$(htmldir)" 1296 @list='$(HTMLS)'; list2=; test -n "$(htmldir)" || list=; \ 1297 for p in $$list; do \ 1298 if test -f "$$p" || test -d "$$p"; then d=; else d="$(srcdir)/"; fi; \ 1299 $(am__strip_dir) \ 1300 if test -d "$$d$$p"; then \ 1301 echo " $(MKDIR_P) '$(DESTDIR)$(htmldir)/$$f'"; \ 1302 $(MKDIR_P) "$(DESTDIR)$(htmldir)/$$f" || exit 1; \ 1303 echo " $(INSTALL_DATA) '$$d$$p'/* '$(DESTDIR)$(htmldir)/$$f'"; \ 1304 $(INSTALL_DATA) "$$d$$p"/* "$(DESTDIR)$(htmldir)/$$f" || exit $$?; \ 1305 else \ 1306 list2="$$list2 $$d$$p"; \ 1307 fi; \ 1308 done; \ 1309 test -z "$$list2" || { echo "$$list2" | $(am__base_list) | \ 1310 while read files; do \ 1311 echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(htmldir)'"; \ 1312 $(INSTALL_DATA) $$files "$(DESTDIR)$(htmldir)" || exit $$?; \ 1313 done; } 1314 install-info: install-info-am 1315 1316 install-info-am: $(INFO_DEPS) 1317 @$(NORMAL_INSTALL) 1318 test -z "$(infodir)" || $(MKDIR_P) "$(DESTDIR)$(infodir)" 1319 @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \ 1320 list='$(INFO_DEPS)'; test -n "$(infodir)" || list=; \ 1321 for file in $$list; do \ 1322 case $$file in \ 1323 $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \ 1324 esac; \ 1325 if test -f $$file; then d=.; else d=$(srcdir); fi; \ 1326 file_i=`echo "$$file" | sed 's|\.info$$||;s|$$|.i|'`; \ 1327 for ifile in $$d/$$file $$d/$$file-[0-9] $$d/$$file-[0-9][0-9] \ 1328 $$d/$$file_i[0-9] $$d/$$file_i[0-9][0-9] ; do \ 1329 if test -f $$ifile; then \ 1330 echo "$$ifile"; \ 1331 else : ; fi; \ 1332 done; \ 1333 done | $(am__base_list) | \ 1334 while read files; do \ 1335 echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(infodir)'"; \ 1336 $(INSTALL_DATA) $$files "$(DESTDIR)$(infodir)" || exit $$?; done 1337 @$(POST_INSTALL) 1338 @if (install-info --version && \ 1339 install-info --version 2>&1 | sed 1q | grep -i -v debian) >/dev/null 2>&1; then \ 1340 list='$(INFO_DEPS)'; test -n "$(infodir)" || list=; \ 1341 for file in $$list; do \ 1342 relfile=`echo "$$file" | sed 's|^.*/||'`; \ 1343 echo " install-info --info-dir='$(DESTDIR)$(infodir)' '$(DESTDIR)$(infodir)/$$relfile'";\ 1344 install-info --info-dir="$(DESTDIR)$(infodir)" "$(DESTDIR)$(infodir)/$$relfile" || :;\ 1345 done; \ 1346 else : ; fi 1347 install-man: 1348 1349 install-pdf: install-pdf-am 1350 1351 install-pdf-am: $(PDFS) 1352 @$(NORMAL_INSTALL) 1353 test -z "$(pdfdir)" || $(MKDIR_P) "$(DESTDIR)$(pdfdir)" 1354 @list='$(PDFS)'; test -n "$(pdfdir)" || list=; \ 1355 for p in $$list; do \ 1356 if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ 1357 echo "$$d$$p"; \ 1358 done | $(am__base_list) | \ 1359 while read files; do \ 1360 echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pdfdir)'"; \ 1361 $(INSTALL_DATA) $$files "$(DESTDIR)$(pdfdir)" || exit $$?; done 1362 install-ps: install-ps-am 1363 1364 install-ps-am: $(PSS) 1365 @$(NORMAL_INSTALL) 1366 test -z "$(psdir)" || $(MKDIR_P) "$(DESTDIR)$(psdir)" 1367 @list='$(PSS)'; test -n "$(psdir)" || list=; \ 1368 for p in $$list; do \ 1369 if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ 1370 echo "$$d$$p"; \ 1371 done | $(am__base_list) | \ 1372 while read files; do \ 1373 echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(psdir)'"; \ 1374 $(INSTALL_DATA) $$files "$(DESTDIR)$(psdir)" || exit $$?; done 1375 installcheck-am: 1376 1377 maintainer-clean: maintainer-clean-am 1378 -rm -f Makefile 1379 maintainer-clean-am: distclean-am maintainer-clean-aminfo \ 1380 maintainer-clean-generic maintainer-clean-vti 1381 1382 mostlyclean: mostlyclean-am 1383 1384 mostlyclean-am: mostlyclean-aminfo mostlyclean-generic mostlyclean-vti 1385 1386 pdf: pdf-am 1387 1388 pdf-am: $(PDFS) 1389 1390 ps: ps-am 1391 1392 ps-am: $(PSS) 1393 1394 uninstall-am: uninstall-dvi-am uninstall-html-am uninstall-info-am \ 1395 uninstall-pdf-am uninstall-ps-am 1396 1397 .MAKE: install-am install-strip 1398 1399 .PHONY: all all-am check check-am clean clean-aminfo clean-generic \ 1400 clean-local dist-info distclean distclean-generic distdir dvi \ 1401 dvi-am html html-am info info-am install install-am \ 1402 install-data install-data-am install-dvi install-dvi-am \ 1403 install-exec install-exec-am install-html install-html-am \ 1404 install-info install-info-am install-man install-pdf \ 1405 install-pdf-am install-ps install-ps-am install-strip \ 1406 installcheck installcheck-am installdirs maintainer-clean \ 1407 maintainer-clean-aminfo maintainer-clean-generic \ 1408 maintainer-clean-vti mostlyclean mostlyclean-aminfo \ 1409 mostlyclean-generic mostlyclean-vti pdf pdf-am ps ps-am \ 1410 uninstall uninstall-am uninstall-dvi-am uninstall-html-am \ 1411 uninstall-info-am uninstall-pdf-am uninstall-ps-am 1412 1413 1414 header.texi: $(top_srcdir)/src/tar.h 1415 sed -f $(srcdir)/texify.sed $(top_srcdir)/src/tar.h \ 1416 | expand >$@ 1417 1418 master-menu: $(tar_TEXINFOS) 1419 emacs -batch -l mastermenu.el -f make-master-menu $(info_TEXINFOS) 1420 1421 untabify: 1422 emacs -batch -l untabify.el $(info_TEXINFOS) $(tar_TEXINFOS) 1423 1424 final: untabify master-menu 1425 1426 # Checking 1427 check-format: 1428 @if test -n "`cat $(info_TEXINFOS) $(tar_TEXINFOS) | tr -d -c '\t'`"; then \ 1429 echo "Sources contain tabs; run make untabify"; \ 1430 false; \ 1431 fi 1432 1433 check-options: 1434 @ARGP_HELP_FMT='usage-indent=0,short-opt-col=0,long-opt-col=0,doc-opt-col=0,opt-doc-col=0,header-col=0,rmargin=1' \ 1435 $(top_builddir)/src/tar --usage | \ 1436 sed -n 's/^\[--\([^]\=\[]*\).*/\1/p' | sort | uniq > opts.$$$$;\ 1437 $(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir) -E - \ 1438 $(info_TEXINFOS) | \ 1439 sed -n '/^@macro/,/^@end macro/d;s/@opindex *\([^@,]*\).*/\1/p' \ 1440 | sort | uniq > docs.$$$$;\ 1441 status=0;\ 1442 join -v1 opts.$$$$ docs.$$$$ > report.$$$$;\ 1443 if test -s report.$$$$; then \ 1444 echo 'Not documented options:'; \ 1445 cat report.$$$$; \ 1446 status=1; \ 1447 fi; \ 1448 join -v2 opts.$$$$ docs.$$$$ > report.$$$$;\ 1449 if test -s report.$$$$; then \ 1450 echo 'Non-existing options:';\ 1451 cat report.$$$$; \ 1452 status=1; \ 1453 fi; \ 1454 rm opts.$$$$ docs.$$$$ report.$$$$;\ 1455 test $$status -ne 0 && exit $$status 1456 1457 check-refs: 1458 @for file in $(info_TEXINFOS) $(tar_TEXINFOS); \ 1459 do \ 1460 sed -e = $$file | \ 1461 sed -n 'N;/@FIXME-.*ref/{s/\(^[0-9][0-9]*\).*@FIXME-.*ref{\([^}]*\).*/'$$file':\1: \2/gp}'; \ 1462 done > $@-t; \ 1463 if [ -s $@-t ]; then \ 1464 echo "Unresolved cross-references:"; \ 1465 cat $@-t;\ 1466 rm $@-t; \ 1467 else \ 1468 rm -f $@-t; \ 1469 fi 1470 1471 check-fixmes: 1472 @for file in $(info_TEXINFOS); \ 1473 do \ 1474 sed -e = $$file | \ 1475 sed -n 'N;/@FIXME{/{s/\(^[0-9][0-9]*\).*@FIXME{\([^}]*\).*/'$$file':\1: \2/gp}'; \ 1476 done > $@-t; \ 1477 if [ -s $@-t ]; then \ 1478 echo "Unresolved FIXMEs:"; \ 1479 cat $@-t; \ 1480 rm $@-t; \ 1481 false; \ 1482 else \ 1483 rm -f $@-t; \ 1484 fi 1485 1486 check-unrevised: 1487 @grep -Hn @UNREVISED $(info_TEXINFOS) > $@-t; \ 1488 if [ -s $@-t ]; then \ 1489 echo "Unrevised nodes:"; \ 1490 cat $@-t; \ 1491 rm $@-t; \ 1492 false;\ 1493 else \ 1494 rm $@-t; \ 1495 fi 1496 1497 all-check-docs: check-format check-options check-refs check-fixmes check-unrevised 1498 1499 check-docs: 1500 $(MAKE) -k all-check-docs 1501 1502 # 1503 1504 clean-local: 1505 rm -rf manual 1506 1507 # Make sure you set TEXINPUTS 1508 # Usual value is: 1509 # /usr/share/texmf/pdftex/plain/misc:/usr/share/texmf/pdftex/config 1510 manual: 1511 TEXINPUTS=$(srcdir):$(top_srcdir)/build-tex:$(TEXINPUTS) \ 1512 MAKEINFO="$(MAKEINFO) $(MAKEINFOFLAGS)" \ 1513 TEXI2DVI="$(TEXI2DVI) -t @finalout" \ 1514 $(GENDOCS) --texi2html tar 'GNU tar manual' 1515 1516 # Tell versions [3.59,3.63) of GNU make to not export all variables. 1517 # Otherwise a system limit (for SysV at least) may be exceeded. 1518 .NOEXPORT: -
doc/tar.1
diff -Naur tar-1.26.orig/doc/tar.1 tar-1.26/doc/tar.1
old new 1 .\" generated by script on Sat Jan 8 16:53:11 2011 2 .Dd Jan 8, 2011 3 .Dt TAR 1 4 .Sh NAME 5 .Nm tar 6 .Nd The GNU version of the tar archiving utility 7 .Sh SYNOPSIS 8 .Nm tar 9 .Oo Fl Oc Cm A Fl \-catenate \-concatenate Cm \||\| c Fl \-create Cm \||\| d Fl \-diff \-compare Cm \||\| Fl \-delete Cm \||\| r Fl \-append Cm \||\| t Fl \-list Cm \||\| Fl \-test\-label Cm \||\| u Fl \-update Cm \||\| x Fl \-extract \-get 10 .Op Ar options 11 .Op Ar pathname ... 12 .Sh DESCRIPTION 13 .Nm Tar 14 stores and extracts files from a tape or disk archive. 15 .Pp 16 The first argument to 17 tar 18 should be a function; either one of the letters 19 .Cm Acdrtux , 20 or one of the long function names. 21 A function letter need not be prefixed with ``\-'', and may be combined 22 with other single-letter options. 23 A long function name must be prefixed with 24 .Cm \\-\\- . 25 Some options take a parameter; with the single-letter form 26 these must be given as separate arguments. 27 With the long form, they may be given by appending 28 .Cm = Ns Ar value 29 to the option. 30 .Sh FUNCTION LETTERS 31 Main operation mode: 32 .Bl -tag -width flag 33 .It Fl A , Fl \-catenate , Fl \-concatenate 34 append tar files to an archive 35 .It Fl c , Fl \-create 36 create a new archive 37 .It Fl d , Fl \-diff , Fl \-compare 38 find differences between archive and file system 39 .It Fl \-delete 40 delete from the archive (not on mag tapes!) 41 .It Fl r , Fl \-append 42 append files to the end of an archive 43 .It Fl t , Fl \-list 44 list the contents of an archive 45 .It Fl \-test\-label 46 test the archive volume label and exit 47 .It Fl u , Fl \-update 48 only append files newer than copy in archive 49 .It Fl x , Fl \-extract , Fl \-get 50 extract files from an archive 51 .El 52 .Sh OTHER OPTIONS 53 Operation modifiers: 54 .Bl -tag -width flag 55 .It \-[0\-7][lmh] 56 specify drive and density 57 .It Fl a , Fl \-auto\-compress 58 use archive suffix to determine the compression program 59 .It Fl \-add\-file Ns \= Ns Ar FILE 60 add given FILE to the archive (useful if its name starts with a dash) 61 .It Fl \-anchored 62 patterns match file name start 63 .It Fl \-no\-anchored 64 patterns match after any `/' (default for exclusion) 65 .It Fl \-atime\-preserve 66 preserve access times on dumped files, either by restoring the times 67 .It Fl \-no\-auto\-compress 68 do not use archive suffix to determine the compression program 69 .It Fl b , Fl \-blocking\-factor Ar BLOCKS 70 BLOCKS x 512 bytes per record 71 .It Fl B , Fl \-read\-full\-records 72 reblock as we read (for 4.2BSD pipes) 73 .It Fl \-backup 74 backup before removal, choose version CONTROL 75 .It Fl C , Fl \-directory Ar DIR 76 change to directory DIR 77 .It Fl \-check\-device 78 check device numbers when creating incremental archives (default) 79 .It Fl \-no\-check\-device 80 do not check device numbers when creating incremental archives 81 .It Fl \-checkpoint 82 display progress messages every NUMBERth record (default 10) 83 .It Fl \-checkpoint\-action Ns \= Ns Ar ACTION 84 execute ACTION on each checkpoint 85 .It Fl \-delay\-directory\-restore 86 delay setting modification times and permissions of extracted 87 .It Fl \-no\-delay\-directory\-restore 88 cancel the effect of --delay-directory-restore option 89 .It Fl \-exclude Ns \= Ns Ar PATTERN 90 exclude files, given as a PATTERN 91 .It Fl \-exclude\-backups 92 exclude backup and lock files 93 .It Fl \-exclude\-caches 94 exclude contents of directories containing CACHEDIR.TAG, 95 .It Fl \-exclude\-caches\-all 96 exclude directories containing CACHEDIR.TAG 97 .It Fl \-exclude\-caches\-under 98 exclude everything under directories containing CACHEDIR.TAG 99 .It Fl \-exclude\-tag Ns \= Ns Ar FILE 100 exclude contents of directories containing FILE, except 101 .It Fl \-exclude\-tag\-all Ns \= Ns Ar FILE 102 exclude directories containing FILE 103 .It Fl \-exclude\-tag\-under Ns \= Ns Ar FILE 104 exclude everything under directories containing FILE 105 .It Fl \-exclude\-vcs 106 exclude version control system directories 107 .It Fl f , Fl \-file Ar ARCHIVE 108 use archive file or device ARCHIVE 109 .It Fl F , Fl \-info\-script , Fl \-new\-volume\-script Ar NAME 110 run script at end of each tape (implies -M) 111 .It Fl \-force\-local 112 archive file is local even if it has a colon 113 .It Fl \-full\-time 114 print file time to its full resolution 115 .It Fl g , Fl \-listed\-incremental Ar FILE 116 handle new GNU-format incremental backup 117 .It Fl G , Fl \-incremental 118 handle old GNU-format incremental backup 119 .It Fl \-group Ns \= Ns Ar NAME 120 force NAME as group for added files 121 .It Fl h , Fl \-dereference 122 follow symlinks; archive and dump the files they point to 123 .It Fl H , Fl \-format Ar FORMAT 124 create archive of the given formatFORMAT is one of the following: 125 .Bl -tag -width flag 126 .It Fl \-format=gnu 127 GNU tar 1.13.x format 128 .It Fl \-format=oldgnu 129 GNU format as per tar <= 1.12 130 .It Fl \-format=pax 131 POSIX 1003.1-2001 (pax) format 132 .It Fl \-format=posix 133 same as pax 134 .It Fl \-format=ustar 135 POSIX 1003.1-1988 (ustar) format 136 .It Fl \-format=v7 137 old V7 tar format 138 .El 139 .It Fl \-hard\-dereference 140 follow hard links; archive and dump the files they refer to 141 .It Fl i , Fl \-ignore\-zeros 142 ignore zeroed blocks in archive (means EOF) 143 .It Fl I , Fl \-use\-compress\-program Ar PROG 144 filter through PROG (must accept -d) 145 .It Fl \-ignore\-case 146 ignore case 147 .It Fl \-no\-ignore\-case 148 case sensitive matching (default) 149 .It Fl \-ignore\-command\-error 150 ignore exit codes of children 151 .It Fl \-no\-ignore\-command\-error 152 treat non-zero exit codes of children as error 153 .It Fl \-ignore\-failed\-read 154 do not exit with nonzero on unreadable files 155 .It Fl \-index\-file Ns \= Ns Ar FILE 156 send verbose output to FILE 157 .It Fl j , Fl \-bzip2 158 159 .It Fl J , Fl \-xz 160 161 .It Fl k , Fl \-keep\-old\-files 162 don't replace existing files when extracting 163 .It Fl K , Fl \-starting\-file Ar MEMBER-NAME 164 begin at member MEMBER-NAME in the archive 165 .It Fl \-keep\-newer\-files 166 don't replace existing files that are newer than their archive copies 167 .It Fl l , Fl \-check\-links 168 print a message if not all links are dumped 169 .It Fl L , Fl \-tape\-length Ar NUMBER 170 change tape after writing NUMBER x 1024 bytes 171 .It Fl \-level Ns \= Ns Ar NUMBER 172 dump level for created listed-incremental archive 173 .It Fl \-lzip 174 175 .It Fl \-lzma 176 177 .It Fl \-lzop 178 179 .It Fl m , Fl \-touch 180 don't extract file modified time 181 .It Fl M , Fl \-multi\-volume 182 create/list/extract multi-volume archive 183 .It Fl \-mode Ns \= Ns Ar CHANGES 184 force (symbolic) mode CHANGES for added files 185 .It Fl \-mtime Ns \= Ns Ar DATE-OR-FILE 186 set mtime for added files from DATE-OR-FILE 187 .It Fl n , Fl \-seek 188 archive is seekable 189 .It Fl N , Fl \-newer , Fl \-after\-date Ar DATE-OR-FILE 190 only store files newer than DATE-OR-FILE 191 .It Fl \-newer\-mtime Ns \= Ns Ar DATE 192 compare date and time when data changed only 193 .It Fl \-null 194 -T reads null-terminated names, disable -C 195 .It Fl \-no\-null 196 disable the effect of the previous --null option 197 .It Fl \-numeric\-owner 198 always use numbers for user/group names 199 .It Fl O , Fl \-to\-stdout 200 extract files to standard output 201 .It Fl \-occurrence 202 process only the NUMBERth occurrence of each file in the archive; 203 .It Fl \-old\-archive , Fl \-portability 204 same as --format=v7 205 .It Fl \-one\-file\-system 206 stay in local file system when creating archive 207 .It Fl \-overwrite 208 overwrite existing files when extracting 209 .It Fl \-overwrite\-dir 210 overwrite metadata of existing directories when extracting (default) 211 .It Fl \-no\-overwrite\-dir 212 preserve metadata of existing directories 213 .It Fl \-owner Ns \= Ns Ar NAME 214 force NAME as owner for added files 215 .It Fl p , Fl \-preserve\-permissions , Fl \-same\-permissions 216 extract information about file permissions (default for superuser) 217 .It Fl P , Fl \-absolute\-names 218 don't strip leading `/'s from file names 219 .It Fl \-pax\-option Ns \= Ns Ar keyword[[:]=value][,keyword[[:]=value]]... 220 control pax keywords 221 .It Fl \-posix 222 same as --format=posix 223 .It Fl \-preserve 224 same as both -p and -s 225 .It Fl \-quote\-chars Ns \= Ns Ar STRING 226 additionally quote characters from STRING 227 .It Fl \-no\-quote\-chars Ns \= Ns Ar STRING 228 disable quoting for characters from STRING 229 .It Fl \-quoting\-style Ns \= Ns Ar STYLE 230 set name quoting style; see below for valid STYLE values 231 .It Fl R , Fl \-block\-number 232 show block number within archive with each message 233 .It Fl \-record\-size Ns \= Ns Ar NUMBER 234 NUMBER of bytes per record, multiple of 512 235 .It Fl \-recursion 236 recurse into directories (default) 237 .It Fl \-no\-recursion 238 avoid descending automatically in directories 239 .It Fl \-recursive\-unlink 240 empty hierarchies prior to extracting directory 241 .It Fl \-remove\-files 242 remove files after adding them to the archive 243 .It Fl \-restrict 244 disable use of some potentially harmful options 245 .It Fl \-rmt\-command Ns \= Ns Ar COMMAND 246 use given rmt COMMAND instead of rmt 247 .It Fl \-rsh\-command Ns \= Ns Ar COMMAND 248 use remote COMMAND instead of rsh 249 .It Fl s , Fl \-preserve\-order , Fl \-same\-order 250 sort names to extract to match archive 251 .It Fl S , Fl \-sparse 252 handle sparse files efficiently 253 .It Fl \-same\-owner 254 try extracting files with the same ownership as exists in the archive (default for superuser) 255 .It Fl \-no\-same\-owner 256 extract files as yourself (default for ordinary users) 257 .It Fl \-no\-same\-permissions 258 apply the user's umask when extracting permissions from the archive (default for ordinary users) 259 .It Fl \-no\-seek 260 archive is not seekable 261 .It Fl \-show\-defaults 262 show tar defaults 263 .It Fl \-show\-omitted\-dirs 264 when listing or extracting, list each directory that does not match search criteria 265 .It Fl \-show\-transformed\-names , Fl \-show\-stored\-names 266 show file or archive names after transformation 267 .It Fl \-sparse\-version Ns \= Ns Ar MAJOR[.MINOR] 268 set version of the sparse format to use (implies --sparse) 269 .It Fl \-strip\-components Ns \= Ns Ar NUMBER 270 strip NUMBER leading components from file names on extraction 271 .It Fl \-suffix Ns \= Ns Ar STRING 272 backup before removal, override usual suffix ('~' unless overridden by environment variable SIMPLE_BACKUP_SUFFIX) 273 .It Fl T , Fl \-files\-from Ar FILE 274 get names to extract or create from FILE 275 .It Fl \-to\-command Ns \= Ns Ar COMMAND 276 pipe extracted files to another program 277 .It Fl \-totals 278 print total bytes after processing the archive; 279 .It Fl \-transform , Fl \-xform Ar EXPRESSION 280 use sed replace EXPRESSION to transform file names 281 .It Fl U , Fl \-unlink\-first 282 remove each file prior to extracting over it 283 .It Fl \-unquote 284 unquote filenames read with -T (default) 285 .It Fl \-no\-unquote 286 do not unquote filenames read with -T 287 .It Fl \-utc 288 print file modification times in UTC 289 .It Fl v , Fl \-verbose 290 verbosely list files processed 291 .It Fl V , Fl \-label Ar TEXT 292 create archive with volume name TEXT; at list/extract time, use TEXT as a globbing pattern for volume name 293 .It Fl \-volno\-file Ns \= Ns Ar FILE 294 use/update the volume number in FILE 295 .It Fl w , Fl \-interactive , Fl \-confirmation 296 ask for confirmation for every action 297 .It Fl W , Fl \-verify 298 attempt to verify the archive after writing it 299 .It Fl \-warning Ns \= Ns Ar KEYWORD 300 warning control 301 .It Fl \-wildcards 302 use wildcards (default for exclusion) 303 .It Fl \-wildcards\-match\-slash 304 wildcards match `/' (default for exclusion) 305 .It Fl \-no\-wildcards\-match\-slash 306 wildcards do not match `/' 307 .It Fl \-no\-wildcards 308 verbatim string matching 309 .It Fl X , Fl \-exclude\-from Ar FILE 310 exclude patterns listed in FILE 311 .It Fl z , Fl \-gzip , Fl \-gunzip Fl \-ungzip 312 313 .It Fl Z , Fl \-compress , Fl \-uncompress 314 315 .El 316 .Sh ENVIRONMENT 317 The behavior of tar is controlled by the following environment variables, 318 among others: 319 .Bl -tag -width Ds 320 .It Ev SIMPLE_BACKUP_SUFFIX 321 Backup prefix to use when extracting, if 322 .Fl \-suffix 323 is not specified. 324 The backup suffix defaults to `~' if neither is specified. 325 .It Ev TAR_OPTIONS 326 Options to prepend to those specified on the command line, separated by 327 whitespace. Embedded backslashes may be used to escape whitespace or 328 backslashes within an option. 329 .It Ev TAPE 330 Device or file to use for the archive if 331 .Fl \-file 332 is not specified. 333 If this environment variable is unset, use stdin or stdout instead. 334 .El 335 .Sh EXAMPLES 336 Create archive.tar from files foo and bar. 337 .Bd -literal -offset indent -compact 338 tar \-cf archive.tar foo bar 339 .Ed 340 List all files in archive.tar verbosely. 341 .Bd -literal -offset indent -compact 342 tar \-tvf archive.tar 343 .Ed 344 Extract all files from archive.tar. 345 .Bd -literal -offset indent -compact 346 tar \-xf archive.tar 347 .Ed 348 .Sh SEE ALSO 349 .\" libarchive 350 .Xr tar 5 , 351 .\" man-pages 352 .Xr symlink 7 , 353 .Xr rmt 8 354 .Sh HISTORY 355 The 356 .Nm tar 357 command appeared in 358 .At v7 . 359 .Sh BUGS 360 The GNU folks, in general, abhor man pages, and create info documents instead. 361 Unfortunately, the info document describing tar is licensed under the GFDL with 362 invariant cover texts, which makes it impossible to include any text 363 from that document in this man page. 364 Most of the text in this document was automatically extracted from the usage 365 text in the source. 366 It may not completely describe all features of the program.
Note:
See TracBrowser
for help on using the repository browser.