Submitted By: Joe Ciccone Date: 2011-01-08 Initial Package Version: 1.22 Origin: Debian Upstream Status: Unknown Description: This patch adds a man page for tar generated by the perl script from debian. diff -Naur tar-1.25.orig/doc/Makefile.am tar-1.25/doc/Makefile.am --- tar-1.25.orig/doc/Makefile.am 2010-10-24 14:07:54.000000000 -0400 +++ tar-1.25/doc/Makefile.am 2011-01-08 16:52:08.938781619 -0500 @@ -17,6 +17,7 @@ ## along with this program; if not, write to the Free Software Foundation, ## Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. +man_MANS = tar.1 info_TEXINFOS = tar.texi tar_TEXINFOS = \ dumpdir.texi\ diff -Naur tar-1.25.orig/doc/Makefile.in tar-1.25/doc/Makefile.in --- tar-1.25.orig/doc/Makefile.in 2010-11-07 08:53:45.000000000 -0500 +++ tar-1.25/doc/Makefile.in 2011-01-08 16:52:08.938781619 -0500 @@ -172,7 +172,7 @@ MAKEINFOHTML = $(MAKEINFO) --html AM_MAKEINFOHTMLFLAGS = $(AM_MAKEINFOFLAGS) DVIPS = dvips -am__installdirs = "$(DESTDIR)$(infodir)" +am__installdirs = "$(DESTDIR)$(infodir)" "$(DESTDIR)$(man1dir)" am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; am__vpath_adj = case $$p in \ $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ @@ -194,6 +194,9 @@ am__base_list = \ sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' +man1dir = $(mandir)/man1 +NROFF = nroff +MANS = $(man_MANS) DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) ACLOCAL = @ACLOCAL@ ALLOCA = @ALLOCA@ @@ -875,6 +878,7 @@ top_build_prefix = @top_build_prefix@ top_builddir = @top_builddir@ top_srcdir = @top_srcdir@ +man_MANS = tar.1 info_TEXINFOS = tar.texi tar_TEXINFOS = \ dumpdir.texi\ @@ -1097,6 +1101,44 @@ echo " rm -f $$i $$i-[0-9] $$i-[0-9][0-9] $$i_i[0-9] $$i_i[0-9][0-9]"; \ rm -f $$i $$i-[0-9] $$i-[0-9][0-9] $$i_i[0-9] $$i_i[0-9][0-9]; \ done +install-man1: $(man_MANS) + @$(NORMAL_INSTALL) + test -z "$(man1dir)" || $(MKDIR_P) "$(DESTDIR)$(man1dir)" + @list=''; test -n "$(man1dir)" || exit 0; \ + { for i in $$list; do echo "$$i"; done; \ + l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \ + sed -n '/\.1[a-z]*$$/p'; \ + } | while read p; do \ + if test -f $$p; then d=; else d="$(srcdir)/"; fi; \ + echo "$$d$$p"; echo "$$p"; \ + done | \ + sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \ + -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \ + sed 'N;N;s,\n, ,g' | { \ + list=; while read file base inst; do \ + if test "$$base" = "$$inst"; then list="$$list $$file"; else \ + echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man1dir)/$$inst'"; \ + $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man1dir)/$$inst" || exit $$?; \ + fi; \ + done; \ + for i in $$list; do echo "$$i"; done | $(am__base_list) | \ + while read files; do \ + test -z "$$files" || { \ + echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man1dir)'"; \ + $(INSTALL_DATA) $$files "$(DESTDIR)$(man1dir)" || exit $$?; }; \ + done; } + +uninstall-man1: + @$(NORMAL_UNINSTALL) + @list=''; test -n "$(man1dir)" || exit 0; \ + files=`{ for i in $$list; do echo "$$i"; done; \ + l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \ + sed -n '/\.1[a-z]*$$/p'; \ + } | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \ + -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \ + test -z "$$files" || { \ + echo " ( cd '$(DESTDIR)$(man1dir)' && rm -f" $$files ")"; \ + cd "$(DESTDIR)$(man1dir)" && rm -f $$files; } tags: TAGS TAGS: @@ -1105,6 +1147,19 @@ distdir: $(DISTFILES) + @list='$(MANS)'; if test -n "$$list"; then \ + list=`for p in $$list; do \ + if test -f $$p; then d=; else d="$(srcdir)/"; fi; \ + if test -f "$$d$$p"; then echo "$$d$$p"; else :; fi; done`; \ + if test -n "$$list" && \ + grep 'ab help2man is required to generate this page' $$list >/dev/null; then \ + echo "error: found man pages containing the \`missing help2man' replacement text:" >&2; \ + grep -l 'ab help2man is required to generate this page' $$list | sed 's/^/ /' >&2; \ + echo " to fix them, install help2man, remove and regenerate the man pages;" >&2; \ + echo " typically \`make maintainer-clean' will remove them" >&2; \ + exit 1; \ + else :; fi; \ + else :; fi @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ list='$(DISTFILES)'; \ @@ -1139,9 +1194,9 @@ dist-info check-am: all-am check: check-am -all-am: Makefile $(INFO_DEPS) +all-am: Makefile $(INFO_DEPS) $(MANS) installdirs: - for dir in "$(DESTDIR)$(infodir)"; do \ + for dir in "$(DESTDIR)$(infodir)" "$(DESTDIR)$(man1dir)"; do \ test -z "$$dir" || $(MKDIR_P) "$$dir"; \ done install: install-am @@ -1189,7 +1244,7 @@ info-am: $(INFO_DEPS) -install-data-am: install-info-am +install-data-am: install-info-am install-man install-dvi: install-dvi-am @@ -1263,7 +1318,7 @@ install-info --info-dir="$(DESTDIR)$(infodir)" "$(DESTDIR)$(infodir)/$$relfile" || :;\ done; \ else : ; fi -install-man: +install-man: install-man1 install-pdf: install-pdf-am @@ -1311,7 +1366,9 @@ ps-am: $(PSS) uninstall-am: uninstall-dvi-am uninstall-html-am uninstall-info-am \ - uninstall-pdf-am uninstall-ps-am + uninstall-man uninstall-pdf-am uninstall-ps-am + +uninstall-man: uninstall-man1 .MAKE: install-am install-strip @@ -1320,14 +1377,15 @@ dvi-am html html-am info info-am install install-am \ install-data install-data-am install-dvi install-dvi-am \ install-exec install-exec-am install-html install-html-am \ - install-info install-info-am install-man install-pdf \ - install-pdf-am install-ps install-ps-am install-strip \ - installcheck installcheck-am installdirs maintainer-clean \ - maintainer-clean-aminfo maintainer-clean-generic \ - maintainer-clean-vti mostlyclean mostlyclean-aminfo \ - mostlyclean-generic mostlyclean-vti pdf pdf-am ps ps-am \ - uninstall uninstall-am uninstall-dvi-am uninstall-html-am \ - uninstall-info-am uninstall-pdf-am uninstall-ps-am + install-info install-info-am install-man install-man1 \ + install-pdf install-pdf-am install-ps install-ps-am \ + install-strip installcheck installcheck-am installdirs \ + maintainer-clean maintainer-clean-aminfo \ + maintainer-clean-generic maintainer-clean-vti mostlyclean \ + mostlyclean-aminfo mostlyclean-generic mostlyclean-vti pdf \ + pdf-am ps ps-am uninstall uninstall-am uninstall-dvi-am \ + uninstall-html-am uninstall-info-am uninstall-man \ + uninstall-man1 uninstall-pdf-am uninstall-ps-am header.texi: $(top_srcdir)/src/tar.h diff -Naur tar-1.25.orig/doc/tar.1 tar-1.25/doc/tar.1 --- tar-1.25.orig/doc/tar.1 1969-12-31 19:00:00.000000000 -0500 +++ tar-1.25/doc/tar.1 2011-01-08 16:53:11.798664576 -0500 @@ -0,0 +1,366 @@ +.\" generated by script on Sat Jan 8 16:53:11 2011 +.Dd Jan 8, 2011 +.Dt TAR 1 +.Sh NAME +.Nm tar +.Nd The GNU version of the tar archiving utility +.Sh SYNOPSIS +.Nm tar +.Oo Fl Oc Cm A Fl \-catenate \-concatenate Cm \||\| c Fl \-create Cm \||\| d Fl \-diff \-compare Cm \||\| Fl \-delete Cm \||\| r Fl \-append Cm \||\| t Fl \-list Cm \||\| Fl \-test\-label Cm \||\| u Fl \-update Cm \||\| x Fl \-extract \-get +.Op Ar options +.Op Ar pathname ... +.Sh DESCRIPTION +.Nm Tar +stores and extracts files from a tape or disk archive. +.Pp +The first argument to +tar +should be a function; either one of the letters +.Cm Acdrtux , +or one of the long function names. +A function letter need not be prefixed with ``\-'', and may be combined +with other single-letter options. +A long function name must be prefixed with +.Cm \\-\\- . +Some options take a parameter; with the single-letter form +these must be given as separate arguments. +With the long form, they may be given by appending +.Cm = Ns Ar value +to the option. +.Sh FUNCTION LETTERS +Main operation mode: +.Bl -tag -width flag +.It Fl A , Fl \-catenate , Fl \-concatenate +append tar files to an archive +.It Fl c , Fl \-create +create a new archive +.It Fl d , Fl \-diff , Fl \-compare +find differences between archive and file system +.It Fl \-delete +delete from the archive (not on mag tapes!) +.It Fl r , Fl \-append +append files to the end of an archive +.It Fl t , Fl \-list +list the contents of an archive +.It Fl \-test\-label +test the archive volume label and exit +.It Fl u , Fl \-update +only append files newer than copy in archive +.It Fl x , Fl \-extract , Fl \-get +extract files from an archive +.El +.Sh OTHER OPTIONS +Operation modifiers: +.Bl -tag -width flag +.It \-[0\-7][lmh] +specify drive and density +.It Fl a , Fl \-auto\-compress +use archive suffix to determine the compression program +.It Fl \-add\-file Ns \= Ns Ar FILE +add given FILE to the archive (useful if its name starts with a dash) +.It Fl \-anchored +patterns match file name start +.It Fl \-no\-anchored +patterns match after any `/' (default for exclusion) +.It Fl \-atime\-preserve +preserve access times on dumped files, either by restoring the times +.It Fl \-no\-auto\-compress +do not use archive suffix to determine the compression program +.It Fl b , Fl \-blocking\-factor Ar BLOCKS +BLOCKS x 512 bytes per record +.It Fl B , Fl \-read\-full\-records +reblock as we read (for 4.2BSD pipes) +.It Fl \-backup +backup before removal, choose version CONTROL +.It Fl C , Fl \-directory Ar DIR +change to directory DIR +.It Fl \-check\-device +check device numbers when creating incremental archives (default) +.It Fl \-no\-check\-device +do not check device numbers when creating incremental archives +.It Fl \-checkpoint +display progress messages every NUMBERth record (default 10) +.It Fl \-checkpoint\-action Ns \= Ns Ar ACTION +execute ACTION on each checkpoint +.It Fl \-delay\-directory\-restore +delay setting modification times and permissions of extracted +.It Fl \-no\-delay\-directory\-restore +cancel the effect of --delay-directory-restore option +.It Fl \-exclude Ns \= Ns Ar PATTERN +exclude files, given as a PATTERN +.It Fl \-exclude\-backups +exclude backup and lock files +.It Fl \-exclude\-caches +exclude contents of directories containing CACHEDIR.TAG, +.It Fl \-exclude\-caches\-all +exclude directories containing CACHEDIR.TAG +.It Fl \-exclude\-caches\-under +exclude everything under directories containing CACHEDIR.TAG +.It Fl \-exclude\-tag Ns \= Ns Ar FILE +exclude contents of directories containing FILE, except +.It Fl \-exclude\-tag\-all Ns \= Ns Ar FILE +exclude directories containing FILE +.It Fl \-exclude\-tag\-under Ns \= Ns Ar FILE +exclude everything under directories containing FILE +.It Fl \-exclude\-vcs +exclude version control system directories +.It Fl f , Fl \-file Ar ARCHIVE +use archive file or device ARCHIVE +.It Fl F , Fl \-info\-script , Fl \-new\-volume\-script Ar NAME +run script at end of each tape (implies -M) +.It Fl \-force\-local +archive file is local even if it has a colon +.It Fl \-full\-time +print file time to its full resolution +.It Fl g , Fl \-listed\-incremental Ar FILE +handle new GNU-format incremental backup +.It Fl G , Fl \-incremental +handle old GNU-format incremental backup +.It Fl \-group Ns \= Ns Ar NAME +force NAME as group for added files +.It Fl h , Fl \-dereference +follow symlinks; archive and dump the files they point to +.It Fl H , Fl \-format Ar FORMAT +create archive of the given formatFORMAT is one of the following: +.Bl -tag -width flag +.It Fl \-format=gnu +GNU tar 1.13.x format +.It Fl \-format=oldgnu +GNU format as per tar <= 1.12 +.It Fl \-format=pax +POSIX 1003.1-2001 (pax) format +.It Fl \-format=posix +same as pax +.It Fl \-format=ustar +POSIX 1003.1-1988 (ustar) format +.It Fl \-format=v7 +old V7 tar format +.El +.It Fl \-hard\-dereference +follow hard links; archive and dump the files they refer to +.It Fl i , Fl \-ignore\-zeros +ignore zeroed blocks in archive (means EOF) +.It Fl I , Fl \-use\-compress\-program Ar PROG +filter through PROG (must accept -d) +.It Fl \-ignore\-case +ignore case +.It Fl \-no\-ignore\-case +case sensitive matching (default) +.It Fl \-ignore\-command\-error +ignore exit codes of children +.It Fl \-no\-ignore\-command\-error +treat non-zero exit codes of children as error +.It Fl \-ignore\-failed\-read +do not exit with nonzero on unreadable files +.It Fl \-index\-file Ns \= Ns Ar FILE +send verbose output to FILE +.It Fl j , Fl \-bzip2 + +.It Fl J , Fl \-xz + +.It Fl k , Fl \-keep\-old\-files +don't replace existing files when extracting +.It Fl K , Fl \-starting\-file Ar MEMBER-NAME +begin at member MEMBER-NAME in the archive +.It Fl \-keep\-newer\-files +don't replace existing files that are newer than their archive copies +.It Fl l , Fl \-check\-links +print a message if not all links are dumped +.It Fl L , Fl \-tape\-length Ar NUMBER +change tape after writing NUMBER x 1024 bytes +.It Fl \-level Ns \= Ns Ar NUMBER +dump level for created listed-incremental archive +.It Fl \-lzip + +.It Fl \-lzma + +.It Fl \-lzop + +.It Fl m , Fl \-touch +don't extract file modified time +.It Fl M , Fl \-multi\-volume +create/list/extract multi-volume archive +.It Fl \-mode Ns \= Ns Ar CHANGES +force (symbolic) mode CHANGES for added files +.It Fl \-mtime Ns \= Ns Ar DATE-OR-FILE +set mtime for added files from DATE-OR-FILE +.It Fl n , Fl \-seek +archive is seekable +.It Fl N , Fl \-newer , Fl \-after\-date Ar DATE-OR-FILE +only store files newer than DATE-OR-FILE +.It Fl \-newer\-mtime Ns \= Ns Ar DATE +compare date and time when data changed only +.It Fl \-null +-T reads null-terminated names, disable -C +.It Fl \-no\-null +disable the effect of the previous --null option +.It Fl \-numeric\-owner +always use numbers for user/group names +.It Fl O , Fl \-to\-stdout +extract files to standard output +.It Fl \-occurrence +process only the NUMBERth occurrence of each file in the archive; +.It Fl \-old\-archive , Fl \-portability +same as --format=v7 +.It Fl \-one\-file\-system +stay in local file system when creating archive +.It Fl \-overwrite +overwrite existing files when extracting +.It Fl \-overwrite\-dir +overwrite metadata of existing directories when extracting (default) +.It Fl \-no\-overwrite\-dir +preserve metadata of existing directories +.It Fl \-owner Ns \= Ns Ar NAME +force NAME as owner for added files +.It Fl p , Fl \-preserve\-permissions , Fl \-same\-permissions +extract information about file permissions (default for superuser) +.It Fl P , Fl \-absolute\-names +don't strip leading `/'s from file names +.It Fl \-pax\-option Ns \= Ns Ar keyword[[:]=value][,keyword[[:]=value]]... +control pax keywords +.It Fl \-posix +same as --format=posix +.It Fl \-preserve +same as both -p and -s +.It Fl \-quote\-chars Ns \= Ns Ar STRING +additionally quote characters from STRING +.It Fl \-no\-quote\-chars Ns \= Ns Ar STRING +disable quoting for characters from STRING +.It Fl \-quoting\-style Ns \= Ns Ar STYLE +set name quoting style; see below for valid STYLE values +.It Fl R , Fl \-block\-number +show block number within archive with each message +.It Fl \-record\-size Ns \= Ns Ar NUMBER +NUMBER of bytes per record, multiple of 512 +.It Fl \-recursion +recurse into directories (default) +.It Fl \-no\-recursion +avoid descending automatically in directories +.It Fl \-recursive\-unlink +empty hierarchies prior to extracting directory +.It Fl \-remove\-files +remove files after adding them to the archive +.It Fl \-restrict +disable use of some potentially harmful options +.It Fl \-rmt\-command Ns \= Ns Ar COMMAND +use given rmt COMMAND instead of rmt +.It Fl \-rsh\-command Ns \= Ns Ar COMMAND +use remote COMMAND instead of rsh +.It Fl s , Fl \-preserve\-order , Fl \-same\-order +sort names to extract to match archive +.It Fl S , Fl \-sparse +handle sparse files efficiently +.It Fl \-same\-owner +try extracting files with the same ownership as exists in the archive (default for superuser) +.It Fl \-no\-same\-owner +extract files as yourself (default for ordinary users) +.It Fl \-no\-same\-permissions +apply the user's umask when extracting permissions from the archive (default for ordinary users) +.It Fl \-no\-seek +archive is not seekable +.It Fl \-show\-defaults +show tar defaults +.It Fl \-show\-omitted\-dirs +when listing or extracting, list each directory that does not match search criteria +.It Fl \-show\-transformed\-names , Fl \-show\-stored\-names +show file or archive names after transformation +.It Fl \-sparse\-version Ns \= Ns Ar MAJOR[.MINOR] +set version of the sparse format to use (implies --sparse) +.It Fl \-strip\-components Ns \= Ns Ar NUMBER +strip NUMBER leading components from file names on extraction +.It Fl \-suffix Ns \= Ns Ar STRING +backup before removal, override usual suffix ('~' unless overridden by environment variable SIMPLE_BACKUP_SUFFIX) +.It Fl T , Fl \-files\-from Ar FILE +get names to extract or create from FILE +.It Fl \-to\-command Ns \= Ns Ar COMMAND +pipe extracted files to another program +.It Fl \-totals +print total bytes after processing the archive; +.It Fl \-transform , Fl \-xform Ar EXPRESSION +use sed replace EXPRESSION to transform file names +.It Fl U , Fl \-unlink\-first +remove each file prior to extracting over it +.It Fl \-unquote +unquote filenames read with -T (default) +.It Fl \-no\-unquote +do not unquote filenames read with -T +.It Fl \-utc +print file modification times in UTC +.It Fl v , Fl \-verbose +verbosely list files processed +.It Fl V , Fl \-label Ar TEXT +create archive with volume name TEXT; at list/extract time, use TEXT as a globbing pattern for volume name +.It Fl \-volno\-file Ns \= Ns Ar FILE +use/update the volume number in FILE +.It Fl w , Fl \-interactive , Fl \-confirmation +ask for confirmation for every action +.It Fl W , Fl \-verify +attempt to verify the archive after writing it +.It Fl \-warning Ns \= Ns Ar KEYWORD +warning control +.It Fl \-wildcards +use wildcards (default for exclusion) +.It Fl \-wildcards\-match\-slash +wildcards match `/' (default for exclusion) +.It Fl \-no\-wildcards\-match\-slash +wildcards do not match `/' +.It Fl \-no\-wildcards +verbatim string matching +.It Fl X , Fl \-exclude\-from Ar FILE +exclude patterns listed in FILE +.It Fl z , Fl \-gzip , Fl \-gunzip Fl \-ungzip + +.It Fl Z , Fl \-compress , Fl \-uncompress + +.El +.Sh ENVIRONMENT +The behavior of tar is controlled by the following environment variables, +among others: +.Bl -tag -width Ds +.It Ev SIMPLE_BACKUP_SUFFIX +Backup prefix to use when extracting, if +.Fl \-suffix +is not specified. +The backup suffix defaults to `~' if neither is specified. +.It Ev TAR_OPTIONS +Options to prepend to those specified on the command line, separated by +whitespace. Embedded backslashes may be used to escape whitespace or +backslashes within an option. +.It Ev TAPE +Device or file to use for the archive if +.Fl \-file +is not specified. +If this environment variable is unset, use stdin or stdout instead. +.El +.Sh EXAMPLES +Create archive.tar from files foo and bar. +.Bd -literal -offset indent -compact +tar \-cf archive.tar foo bar +.Ed +List all files in archive.tar verbosely. +.Bd -literal -offset indent -compact +tar \-tvf archive.tar +.Ed +Extract all files from archive.tar. +.Bd -literal -offset indent -compact +tar \-xf archive.tar +.Ed +.Sh SEE ALSO +.\" libarchive +.Xr tar 5 , +.\" man-pages +.Xr symlink 7 , +.Xr rmt 8 +.Sh HISTORY +The +.Nm tar +command appeared in +.At v7 . +.Sh BUGS +The GNU folks, in general, abhor man pages, and create info documents instead. +Unfortunately, the info document describing tar is licensed under the GFDL with +invariant cover texts, which makes it impossible to include any text +from that document in this man page. +Most of the text in this document was automatically extracted from the usage +text in the source. +It may not completely describe all features of the program.