source: patches/tar-1.22-man_page-1.patch@ 2fb1dc02

Submitted By: Jim Gifford (jim at cross-lfs dot org)
Date: 2009-03-06
Initial Package Version: 1.22
Origin: Debian
Upstream Status: N/A
Description: This Patch adds and man-page to TAR. This has been
             added as per numerous requests.

diff -Naur tar-1.22.orig/doc/Makefile.am tar-1.22/doc/Makefile.am
--- tar-1.22.orig/doc/Makefile.am       2008-04-14 05:03:12.000000000 -0700
+++ tar-1.22/doc/Makefile.am    2009-03-05 20:50:20.245637658 -0800
@@ -17,6 +17,8 @@
 ## along with this program; if not, write to the Free Software Foundation,
 ## Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
 
+man_MANS = tar.1
+
 info_TEXINFOS = tar.texi
 tar_TEXINFOS = \
  dumpdir.texi\
diff -Naur tar-1.22.orig/doc/Makefile.in tar-1.22/doc/Makefile.in
--- tar-1.22.orig/doc/Makefile.in       2009-03-04 23:05:25.000000000 -0800
+++ tar-1.22/doc/Makefile.in    2009-03-05 20:50:20.245637658 -0800
@@ -146,13 +146,16 @@
 MAKEINFOHTML = $(MAKEINFO) --html
 AM_MAKEINFOHTMLFLAGS = $(AM_MAKEINFOFLAGS)
 DVIPS = dvips
-am__installdirs = "$(DESTDIR)$(infodir)"
+am__installdirs = "$(DESTDIR)$(infodir)" "$(DESTDIR)$(man1dir)"
 am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
 am__vpath_adj = case $$p in \
     $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
     *) f=$$p;; \
   esac;
 am__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
+man1dir = $(mandir)/man1
+NROFF = nroff
+MANS = $(man_MANS)
 DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
 ACLOCAL = @ACLOCAL@
 ALLOCA = @ALLOCA@
@@ -645,6 +648,7 @@
 target_alias = @target_alias@
 top_builddir = @top_builddir@
 top_srcdir = @top_srcdir@
+man_MANS = tar.1
 info_TEXINFOS = tar.texi
 tar_TEXINFOS = \
  dumpdir.texi\
@@ -858,6 +862,51 @@
          echo " rm -f $$i $$i-[0-9] $$i-[0-9][0-9] $$i_i[0-9] $$i_i[0-9][0-9]"; \
          rm -f $$i $$i-[0-9] $$i-[0-9][0-9] $$i_i[0-9] $$i_i[0-9][0-9]; \
        done
+install-man1: $(man1_MANS) $(man_MANS)
+       @$(NORMAL_INSTALL)
+       test -z "$(man1dir)" || $(MKDIR_P) "$(DESTDIR)$(man1dir)"
+       @list='$(man1_MANS) $(dist_man1_MANS) $(nodist_man1_MANS)'; \
+       l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \
+       for i in $$l2; do \
+         case "$$i" in \
+           *.1*) list="$$list $$i" ;; \
+         esac; \
+       done; \
+       for i in $$list; do \
+         if test -f $(srcdir)/$$i; then file=$(srcdir)/$$i; \
+         else file=$$i; fi; \
+         ext=`echo $$i | sed -e 's/^.*\\.//'`; \
+         case "$$ext" in \
+           1*) ;; \
+           *) ext='1' ;; \
+         esac; \
+         inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \
+         inst=`echo $$inst | sed -e 's/^.*\///'`; \
+         inst=`echo $$inst | sed '$(transform)'`.$$ext; \
+         echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man1dir)/$$inst'"; \
+         $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man1dir)/$$inst"; \
+       done
+uninstall-man1:
+       @$(NORMAL_UNINSTALL)
+       @list='$(man1_MANS) $(dist_man1_MANS) $(nodist_man1_MANS)'; \
+       l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \
+       for i in $$l2; do \
+         case "$$i" in \
+           *.1*) list="$$list $$i" ;; \
+         esac; \
+       done; \
+       for i in $$list; do \
+         ext=`echo $$i | sed -e 's/^.*\\.//'`; \
+         case "$$ext" in \
+           1*) ;; \
+           *) ext='1' ;; \
+         esac; \
+         inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \
+         inst=`echo $$inst | sed -e 's/^.*\///'`; \
+         inst=`echo $$inst | sed '$(transform)'`.$$ext; \
+         echo " rm -f '$(DESTDIR)$(man1dir)/$$inst'"; \
+         rm -f "$(DESTDIR)$(man1dir)/$$inst"; \
+       done
 tags: TAGS
 TAGS:
 
@@ -896,9 +945,9 @@
          dist-info
 check-am: all-am
 check: check-am
-all-am: Makefile $(INFO_DEPS)
+all-am: Makefile $(INFO_DEPS) $(MANS)
 installdirs:
-       for dir in "$(DESTDIR)$(infodir)"; do \
+       for dir in "$(DESTDIR)$(infodir)" "$(DESTDIR)$(man1dir)"; do \
          test -z "$$dir" || $(MKDIR_P) "$$dir"; \
        done
 install: install-am
@@ -945,7 +994,7 @@
 
 info-am: $(INFO_DEPS)
 
-install-data-am: install-info-am
+install-data-am: install-info-am install-man
 
 install-dvi: install-dvi-am
 
@@ -1010,7 +1059,7 @@
            install-info --info-dir="$(DESTDIR)$(infodir)" "$(DESTDIR)$(infodir)/$$relfile" || :;\
          done; \
        else : ; fi
-install-man:
+install-man: install-man1
 
 install-pdf: install-pdf-am
 
@@ -1054,7 +1103,9 @@
 ps-am: $(PSS)
 
 uninstall-am: uninstall-dvi-am uninstall-html-am uninstall-info-am \
-       uninstall-pdf-am uninstall-ps-am
+       uninstall-man uninstall-pdf-am uninstall-ps-am
+
+uninstall-man: uninstall-man1
 
 .MAKE: install-am install-strip
 
@@ -1063,14 +1114,15 @@
        html-am info info-am install install-am install-data \
        install-data-am install-dvi install-dvi-am install-exec \
        install-exec-am install-html install-html-am install-info \
-       install-info-am install-man install-pdf install-pdf-am \
-       install-ps install-ps-am install-strip installcheck \
-       installcheck-am installdirs maintainer-clean \
+       install-info-am install-man install-man1 install-pdf \
+       install-pdf-am install-ps install-ps-am install-strip \
+       installcheck installcheck-am installdirs maintainer-clean \
        maintainer-clean-aminfo maintainer-clean-generic \
        maintainer-clean-vti mostlyclean mostlyclean-aminfo \
        mostlyclean-generic mostlyclean-vti pdf pdf-am ps ps-am \
        uninstall uninstall-am uninstall-dvi-am uninstall-html-am \
-       uninstall-info-am uninstall-pdf-am uninstall-ps-am
+       uninstall-info-am uninstall-man uninstall-man1 \
+       uninstall-pdf-am uninstall-ps-am
 
 
 header.texi: $(top_srcdir)/src/tar.h
diff -Naur tar-1.22.orig/doc/tar.1 tar-1.22/doc/tar.1
--- tar-1.22.orig/doc/tar.1     1969-12-31 16:00:00.000000000 -0800
+++ tar-1.22/doc/tar.1  2009-03-05 20:52:59.235825673 -0800
@@ -0,0 +1,400 @@
+.\" @(#)tar.1 1.11.1 93/19/22 PJV;
+.TH TAR 1 "29 Aug 2007"
+.SH NAME
+tar \- The GNU version of the tar archiving utility
+.SH SYNOPSIS
+.B tar
+[
+.B \-
+]
+.B A \-\-catenate \-\-concatenate \||\| c \-\-create \||\| d \-\-diff \-\-compare \||\| \-\-delete \||\| r \-\-append \||\| t \-\-list \||\| u \-\-update \||\| x \-\-extract \-\-get 
+.I [ options ]
+.I pathname [ pathname ... ] 
+.SH DESCRIPTION
+.LP
+This manual page documents the GNU version of
+.B tar
+, an archiving program designed to store and extract files from 
+an archive file known as a 
+.IR tarfile.
+A 
+.IR tarfile 
+may be made on a tape drive, however, it is also common
+to write a
+.IR tarfile
+to a normal file. 
+The first argument to 
+.B tar
+must be one of the options:
+.BR Acdrtux ,
+followed by any optional functions.
+The final arguments to 
+.B tar
+are the names of the files or directories which should be archived. The use
+of a directory name always implies that the subdirectories below should be
+included in the archive.
+.SH EXAMPLES
+.TP
+.B tar \-xvvf foo.tar
+extract foo.tar
+.TP
+.B tar \-xvvzf foo.tar.gz
+extract gzipped foo.tar.gz
+.TP
+.B tar \-cvvf foo.tar foo/
+tar contents of folder foo in foo.tar
+.SH "FUNCTION LETTERS"
+.TP
+.B One of the following options must be used:
+.TP
+.B \-A, \-\-catenate, \-\-concatenate
+append tar files to an archive
+.TP
+.B \-c, \-\-create     
+create a new archive
+.TP
+.B \-d, \-\-diff, \-\-compare
+find differences between archive and file system
+.TP
+.B \-\-delete          
+delete from the archive (not for use on mag tapes!)
+.TP
+.B \-r, \-\-append             
+append files to the end of an archive
+.TP
+.B \-t, \-\-list               
+list the contents of an archive
+.TP
+.B \-u, \-\-update             
+only append files that are newer than copy in archive
+.TP
+.B \-x, \-\-extract, \-\-get           
+extract files from an archive
+.SH "OTHER OPTIONS"
+.TP
+.B \-\-allow\-name\-mangling
+re-enable handling of GNUTYPE_NAMES which is now disabled by default
+.TP
+.B \-\-anchored        
+force exclusion patterns to match initial subsequences
+.TP
+.B \-\-atime\-preserve 
+don't change access times on dumped files
+.TP
+.B \-a, \-\-auto\-compress
+with \-\-create, selects compression algorithm basing on the suffix
+of the archive file name
+.TP
+.B \-b, \-\-blocking\-factor N
+use record size of Nx512 bytes (default N=20)
+.TP
+.B \-B, \-\-read\-full\-records
+reblock as we read (for reading 4.2BSD pipes)
+.TP
+.B \-\-backup[\=TYPE]
+back up files instead of overwriting (TYPE=numbered, existing, simple)
+.TP 
+.B \-C, \-\-directory DIR      
+change to directory DIR
+.TP 
+.B \-\-checkpoint              
+print periodic checkpoints
+.TP
+.B \-\-checkpoint\-action
+this action allows to specify an action to be executed upon hitting a
+checkpoint.  Recognized actions are: dot, echo (the default),
+echo\=string, ttyout\=string, exec\=cmdline, and sleep\=value.  Any number
+of `\-\-checkpoint\-action' options can be specified, the actions will be
+executed in order of their appearance in the command line.
+.TP
+.B \-\-check\-device
+enables comparing device numbers.  This is the default.
+.TP
+.B \-\-no\-check\-device
+disables comparing device numbers during preparatory stage of an 
+incremental dump.  
+This allows to avoid creating full dumps if the device numbers change 
+(e.g. when using an LVM snapshot)
+.TP
+.B \-\-exclude=PATTERN
+exclude files matching PATTERN
+.TP
+.B \-f, \-\-file [HOSTNAME:]F  
+use archive file or device F (otherwise value of TAPE environment variable; if unset, "\-", meaning stdin/stdout)
+.TP 
+.B \-F, \-\-info\-script F, \-\-new\-volume\-script F 
+run script at end of each tape (implies \-M)
+.TP
+.B \-\-force\-local            
+archive file is local even if it has a colon
+.TP
+.B \-G, \-\-incremental        
+create/list/extract old GNU-format incremental backup
+.TP
+.B \-g, \-\-listed\-incremental F 
+create/list/extract new GNU-format incremental backup
+.TP
+.B \-\-group G
+set group to G while adding files
+.TP 
+.B \-h, \-\-dereference        
+don't dump symlinks; dump the files they point to
+.TP
+.B \-\-hard\-dereference
+during archive creation, dereferences hard links and stores the files
+they refer to, instead of creating usual hard link members (type '1')
+.TP
+.B \-\-help
+print help message
+.TP
+.B \-i, \-\-ignore\-zeros      
+ignore blocks of zeros in archive (normally mean EOF)
+.TP
+.B \-\-ignore\-case
+ignore case when excluding files
+.TP
+.B \-\-ignore\-failed\-read    
+don't exit with non-zero status on unreadable files
+.TP
+.B \-j, \-\-bzip2
+filter archive through bzip2, use to decompress .bz2 files.
+WARNING: some previous versions of tar used option \-I to 
+filter through bzip2.  When writing scripts, use \-\-bzip2 
+instead of \-j so that both older and newer tar versions
+will work.
+.TP
+.B \-J, \-\-xz
+selects XZ compression algorithm
+.TP
+.B \-k, \-\-keep\-old\-files   
+keep existing files; don't overwrite them from archive
+.TP
+.B \-K, \-\-starting\-file F   
+begin at file F in the archive
+.TP
+.B \-\-lzip
+selects Lzip compression algorithm
+.TP
+.B \-\-lzma
+selects LZMA compression algorithm
+.TP
+.B \-l, \-\-check\-links
+print a message if not all links are dumped
+.TP
+.B \-L, \-\-tape\-length N     
+change tapes after writing N*1024 bytes
+.TP
+.B \-m, \-\-touch
+don't extract file modified time
+.TP
+.BI \-\-transform " expr"
+applies filename transformations.  
+The argument to this option can be a list of replace expressions, separated
+by semicolon (as in `sed').
+Filename transformations are applied to symbolic link targets during both
+creation and extraction.
+This option may be specified any number of
+times, the specified transofrmations will be applied in turn.
+.TP
+.B \-M, \-\-multi\-volume      
+create/list/extract multi-volume archive
+.TP
+.B \-\-mode M
+set permissions to M while adding files
+.TP
+.B \-N, \-\-after\-date DATE, \-\-newer DATE
+only store files newer than DATE
+.TP
+.B \-\-newer\-mtime DATE
+only store files whose contents have changed after DATE
+.TP
+.B \-\-no\-anchored
+allow exclusion patterns to match any substring (the default)
+.TP
+.B \-\-no\-ignore\-case
+match patterns case sensitively (the default)
+.TP
+.B \-\-no\-recursion
+do not recurse into subdirectories
+.TP
+.B \-o, \-\-no\-same\-owner
+extract files with owner set to current user (the default for non-root
+users)
+.TP
+.B \-\-no\-same\-permissions
+apply umask to extracted files (the default for non-root users)
+.TP
+.B \-\-no\-wildcards
+do not use wildcards when excluding files
+.TP
+.B \-\-no\-wildcards\-match\-slash
+don't let wildcards match "/" when excluding files
+.TP
+.B \-\-null
+for \-T, use "NUL" instead of newline as filename terminator
+.TP
+.B \-\-numeric\-owner
+always use numbers for user/group names
+.TP
+.B \-\-old\-archive, \-\-portability   
+write a V7 format archive, rather than ANSI format.  These options are
+deprecated, please use 
+.B \-\-format\=v7
+instead.
+.TP
+.B \-\-one\-file\-system       
+stay in local file system when creating an archive
+.TP
+.B \-\-owner O
+set owner to O while adding files
+.TP 
+.B \-O, \-\-to\-stdout         
+extract files to standard output
+.TP
+.B \-p, \-\-same\-permissions, \-\-preserve\-permissions 
+ignore umask when extracting files (the default for root)
+.TP
+.B \-P, \-\-absolute\-names
+don't strip leading `/'s from file names
+.TP
+.B \-\-posix
+create POSIX compliant archive.  This option is deprecated,
+please use 
+.B \-\-format\=posix
+instead.
+.TP
+.B \-\-preserve                
+like \-p \-s
+.TP
+.B \-R, \-\-block\-number      
+show block number within archive with each message
+.TP
+.B \-\-record\-size SIZE
+use SIZE bytes per record
+.TP
+.B \-\-recursion
+recurse into directories (the default)
+.TP
+.B \-\-recursive\-unlink
+remove existing directories before extracting directories of the same
+name
+.TP 
+.B \-\-remove\-files           
+remove files after adding them to the archive
+.TP
+.B \-\-rsh\-command=CMD
+Use remote COMMAND instead of `rsh'.  This option exists so that
+people who use something other than the standard `rsh' (e.g., a
+Kerberized `rsh') can access a remote device.
+.TP
+.B \-S, \-\-sparse             
+handle sparse files efficiently
+.TP
+.B \-s, \-\-same\-order, \-\-preserve\-order   
+list of names to extract is sorted to match archive
+.TP
+.B \-\-same\-owner             
+extract files with owner as specified in archive (the default for
+root)
+.TP
+.B \-\-show\-omitted\-dirs
+mention directories that are being skipped over
+.TP
+.BI \-\-strip\-components " n"
+Strip the given number of leading directory components
+.TP
+.B \-\-strip, \-\-strip\-components N
+Strips the first N components from archive members' pathnames when
+unpacking.
+.TP
+.B \-\-suffix SUFFIX
+append SUFFIX to make backup files (default ~)
+.TP 
+.B \-T, \-\-files\-from F      
+get names to extract or archive from file F
+.TP
+.B \-\-totals
+display total bytes written after creating an archive
+.TP
+.B \-U, \-\-unlink\-first
+unlink & recreate files instead of overwriting
+.TP
+.B \-\-use\-compress\-program PROG
+filter the archive through PROG (which must accept \-d)
+.TP
+.B \-v, \-\-verbose            
+verbosely list files processed
+.TP
+.B \-V, \-\-label NAME 
+create archive with volume name NAME
+.TP 
+.B \-\-version         
+print tar program version number
+.TP
+.B \-\-volno\-file F
+keep track of current volume (of a multi-volume archive) in F
+.TP
+.B \-w, \-\-interactive, \-\-confirmation      
+ask for confirmation for every action
+.TP
+.B \-W, \-\-verify             
+attempt to verify the archive after writing it
+.TP
+.B \-\-wildcards
+use wildcards when excluding files (the default)
+.TP
+.B \-\-wildcards\-match\-slash
+allow wildcards to match "/" (the default)
+.TP
+.B \-X, \-\-exclude\-from=FILE 
+exclude files matching patterns listed in FILE
+.TP
+.B \-Z, \-\-compress, \-\-uncompress           
+filter the archive through compress
+.TP 
+.B \-z, \-\-gzip, \-\-gunzip, \-\-ungzip               
+filter the archive through gzip
+.TP
+.B \-[0\-7][lmh]               
+specify drive and density
+.SH ENVIRONMENT
+The behavior of tar is controlled by the following environment variables,
+among others:
+.TP
+.B TAPE
+Device or file to use for the archive if \fB--file\fR is not specified.
+If this environment variable is unset, use stdin or stdout instead.
+.TP
+.B TAR_OPTIONS
+Options to prepend to those specified on the command line, separated by
+whitespace.  Embedded backslashes may be used to escape whitespace or
+backslashes within an option.
+.LP
+In addition, the value of the blocking factor is made available to info
+and checkpoint scripts via environment variable 
+.B TAR_BLOCKING_FACTOR.
+.SH BUGS
+.LP
+The GNU folks, in general, abhor man pages and create info documents instead.
+The maintainer of \fBtar\fR falls into this category.  Thus, this man page may 
+not be complete nor current, and it is included in the Cross-LFS Build 
+because man is a great tool :).  This man page was taken from Debian 
+Linux and has since been lovingly updated here.
+
+If you want to read the complete documentation for GNU tar, please refer to
+the online version at 
+.PP
+.ce 1
+<http://www.gnu.org/software/tar/manual/index.html>
+.PP
+This man page was created for the Cross LFS Build.  It does not describe
+all of the functionality of tar, and it is often out of date.  Patches to 
+improve the coverage and/or accuracy of this man page are appreciated, and
+should be filed as tickets in bug reporting system for Cross-LFS and
+not submitted to the GNU tar maintainers. The URL for the Cross-LFS bug
+reporting system is at
+.PP
+.ce 1
+<http://trac.cross-lfs.org>
+.PP
+