source: patches/sysklogd-1.4.1-fixes-1.patch@ 3d35a7a

CHANGES

@@ +1 @@
+Version 1.4.2
+
+ . Dmitry V. Levin <ldv@altlinux.org>
+   - Close file descriptor in FindSymbolFile() in ksym.c in order not to
+     leak file descriptors.
+ . Solar Designer <solar@openwall.com>
+   - improve crunch_list()
+   - Prevent potential buffer overflow in reading messages from the
+     kernel log ringbuffer.
+   - Ensure that "len" is not placed in a register, and that the
+     endtty() signal handler is not installed too early which could
+     cause a segmentation fault or worse.
+ . Steve Grubb <linux_4ever@yahoo.com>
+   - fix memory calculation in crunch_list()
+ . Martin Schulze <joey@infodrom.org>
+   - klogd will reconnect to the logger (mostly syslogd) after it went
+     away
+   - On heavily loaded system syslog will not spit out error messages
+     anymore when recvfrom() results in EAGAIN
+   - Makefile improvements
+   - Local copy of module.h
+   - Improved sysklogd.8
+   - Always log with syslogd's timezone and locale
+   - Remove trailing newline when forwarding messages
+ . Jon Burgess <Jon_Burgess@eur.3com.com>
+   - Moved the installation of the signal handler up a little bit so it
+     guaranteed to be available when the child is forked, hence, fixing a
+     race condition.  This used to create problems with UML and fast
+     machines.
+ . Greg Trounson <gregt@maths.otago.ac.nz>
+   - Improved README.linux
+ . Ulf Härnhammar <Ulf.Harnhammar.9485@student.uu.se>
+   - Bondary check for fscanf() in InitKsyms() and CheckMapVersion()
+ . Colin Phipps <cph@cph.demon.co.uk>
+   - Don't block on the network socket in case of package los
+ . Dirk Mueller <mueller@kde.org>
+   - Don't crash when filesize limit is reached (e.g. without LFS)
+
+
 Version 1.4.1
 
  . klogd will set the console log level only if `-c' is given on the
@@ -30 +69 @@
  . Olaf Kirch <okir@caldera.de>
    - Remove Unix Domain Sockets and switch to Datagram Unix Sockets
  . Several bugfixes and improvements, please refer to the .c files
+
+
+Local variables:
+mode: indented-text
+fill-column: 72
+End:

klogd.8

@@ -321 +321 @@
 .B klogd
 to reload the module symbol information whenever a protection fault
 is detected.  Caution should be used before invoking the program in
-\'paranoid\' mode.  The stability of the kernel and the operating
+\&'paranoid\&' mode.  The stability of the kernel and the operating
 environment is always under question when a protection fault occurs.
 Since the klogd daemon must execute system calls in order to read the
 module symbol information there is the possibility that the system may

klogd.c

@@ -243 +243 @@
  *      people have submitted patches: Troels Walsted Hansen
  *      <troels@thule.no>, Wolfgang Oertl <Wolfgang.Oertl@uibk.ac.at>
  *      and Thomas Roessler.
+ * Thu Apr 29 15:24:07 2004: Solar Designer <solar@openwall.com>
+ *      Prevent potential buffer overflow in reading messages from the
+ *      kernel log rinbuffer.
  */
 
 
@@ -938 +941 @@
          * messages into this fresh buffer.
          */
         memset(log_buffer, '\0', sizeof(log_buffer));
-        if ( (rdcnt = ksyslog(2, log_buffer, sizeof(log_buffer))) < 0 )
+        if ( (rdcnt = ksyslog(2, log_buffer, sizeof(log_buffer)-1)) < 0 )
         {
                 if ( errno == EINTR )
                         return;

ksym.c

@@ -105 +105 @@
  *
  * Tue Sep 12 23:48:12 CEST 2000: Martin Schulze <joey@infodrom.ffis.de>
  *      Close symbol file in InitKsyms() when an error occurred.
+ *
+ * Thu Apr 29 18:07:16 CEST 2004: Dmitry Levin <ldv@altlinux.org>
+ *      Close file descriptor in FindSymbolFile() in order not to leak
+ *      file descriptors.
+ *
+ * Fri Jul 16 08:32:49 CEST 2004: Ulf Härnhammar <Ulf.Harnhammar.9485@student.uu.se>
+ *      Added boundary check for fscanf() in InitKsyms() and
+ *      CheckMapVersion() to prevent an unintended crash when reading
+ *      an incorrect System.map.
  */
 
 
@@ -236 +245 @@
          */
         while ( !feof(sym_file) )
         {
-                if ( fscanf(sym_file, "%lx %c %s\n", &address, &type, sym)
+                if ( fscanf(sym_file, "%lx %c %511s\n", &address, &type, sym)
                     != 3 )
                 {
                         Syslog(LOG_ERR, "Error in symbol table input (#1).");
@@ -344 +353 @@
                 if ( (sym_file = fopen(symfile, "r")) != (FILE *) 0 ) {
                         if (CheckMapVersion(symfile) == 1)
                                 file = symfile;
+                        fclose (sym_file);
                 }
                 if (sym_file == (FILE *) 0 || file == (char *) 0) {
                         sprintf (symfile, "%s", *mf);
@@ -352 +362 @@
                         if ( (sym_file = fopen(symfile, "r")) != (FILE *) 0 ) {
                                 if (CheckMapVersion(symfile) == 1)
                                         file = symfile;
+                                fclose (sym_file);
                         }
                 }
 
@@ -533 +544 @@
                 version = 0;
                 while ( !feof(sym_file) && (version == 0) )
                 {
-                        if ( fscanf(sym_file, "%lx %c %s\n", &address, \
+                        if ( fscanf(sym_file, "%lx %c %511s\n", &address, \
                                     &type, sym) != 3 )
                         {
                                 Syslog(LOG_ERR, "Error in symbol table input (#2).");
@@ -899 +910 @@
         return;
 }
 #endif
+
+/*
+ * Local variables:
+ *  c-indent-level: 8
+ *  c-basic-offset: 8
+ *  tab-width: 8
+ * End:
+ */

ksym_mod.c

@@ -78 +78 @@
  *
  * Tue Sep 12 23:11:13 CEST 2000: Martin Schulze <joey@infodrom.ffis.de>
  *      Changed llseek() to lseek64() in order to skip a libc warning.
+ *
+ * Wed Mar 31 17:35:01 CEST 2004: Martin Schulze <joey@infodrom.org>
+ *      Removed references to <linux/module.h> since it doesn't work
+ *      anymore with its recent content from Linux 2.4/2.6, created
+ *      module.h locally instead.
  */
 
 
@@ -89 +94 @@
 #include <errno.h>
 #include <sys/fcntl.h>
 #include <sys/stat.h>
+#include "module.h"
 #if !defined(__GLIBC__)
 #include <linux/time.h>
-#include <linux/module.h>
+#include <linux/linkage.h>
 #else /* __GLIBC__ */
-#include <linux/module.h>
+#include <linux/linkage.h>
 extern __off64_t lseek64 __P ((int __fd, __off64_t __offset, int __whence));
 extern int get_kernel_syms __P ((struct kernel_sym *__table));
 #endif /* __GLIBC__ */
@@ -107 +113 @@
 
 #if !defined(__GLIBC__)
 /*
- * The following bit uses some kernel/library magic to product what
+ * The following bit uses some kernel/library magic to produce what
  * looks like a function call to user level code.  This function is
  * actually a system call in disguise.  The purpose of the getsyms
  * call is to return a current copy of the in-kernel symbol table.

Makefile

@@ -4 +4 @@
 #CFLAGS= -g -DSYSV -Wall
 #LDFLAGS= -g
 CFLAGS= $(RPM_OPT_FLAGS) -O3 -DSYSV -fomit-frame-pointer -Wall -fno-strength-reduce
+# -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE
 LDFLAGS= -s
 
 # Look where your install program is.
 INSTALL = /usr/bin/install
-BINDIR = /usr/sbin
-MANDIR = /usr/man
+
+# Destination paths, set prefix=/opt if required
+BINDIR = $(prefix)/usr/sbin
+MANDIR = $(prefix)/usr/share/man
 
 # There is one report that under an all ELF system there may be a need to
 # explicilty link with libresolv.a.  If linking syslogd fails you may wish
@@ -34 +37 @@
 # The following define establishes ownership for the man pages.
 # Avery tells me that there is a difference between Debian and
 # Slackware.  Rather than choose sides I am leaving it up to the user.
-MAN_OWNER = root
-# MAN_OWNER = man
+MAN_USER = root
+MAN_GROUP = root
+MAN_PERMS = 644
 
 # The following define establishes the name of the pid file for the
 # syslogd daemon.  The library include file (paths.h) defines the
@@ -116 +120 @@
         ${INSTALL} -m 500 -s klogd ${BINDIR}/klogd
 
 install_man:
-        ${INSTALL} -o ${MAN_OWNER} -g ${MAN_OWNER} -m 644 sysklogd.8 ${MANDIR}/man8/sysklogd.8
-        ${INSTALL} -o ${MAN_OWNER} -g ${MAN_OWNER} -m 644 syslogd.8 ${MANDIR}/man8/syslogd.8
-        ${INSTALL} -o ${MAN_OWNER} -g ${MAN_OWNER} -m 644 syslog.conf.5 ${MANDIR}/man5/syslog.conf.5
-        ${INSTALL} -o ${MAN_OWNER} -g ${MAN_OWNER} -m 644 klogd.8 ${MANDIR}/man8/klogd.8
+        ${INSTALL} -o ${MAN_USER} -g ${MAN_GROUP} -m ${MAN_PERMS} sysklogd.8 ${MANDIR}/man8/sysklogd.8
+        ${INSTALL} -o ${MAN_USER} -g ${MAN_GROUP} -m ${MAN_PERMS} syslogd.8 ${MANDIR}/man8/syslogd.8
+        ${INSTALL} -o ${MAN_USER} -g ${MAN_GROUP} -m ${MAN_PERMS} syslog.conf.5 ${MANDIR}/man5/syslog.conf.5
+        ${INSTALL} -o ${MAN_USER} -g ${MAN_GROUP} -m ${MAN_PERMS} klogd.8 ${MANDIR}/man8/klogd.8

module.h

@@ +1 @@
+/*
+    module.h - Miscellaneous module definitions
+    Copyright (c) 1996 Richard Henderson <rth@tamu.edu>
+    Copyright (c) 2004 Martin Schulze <joey@infodrom.org>
+
+    This file is part of the sysklogd package.
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program; if not, write to the Free Software
+    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+/* ChangeLog:
+ *
+ * Wed Mar 31 17:35:01 CEST 2004: Martin Schulze <joey@infodrom.org>
+ *      Created local copy of module.h based on the content of Linux
+ *      2.2 since <linux/module.h> doesn't work anymore with its
+ *      recent content from Linux 2.4/2.6.
+ */
+
+#include <asm/atomic.h>
+
+#define MODULE_NAME_LEN 60
+
+struct kernel_sym
+{
+        unsigned long value;
+        char name[MODULE_NAME_LEN];
+};
+
+
+struct list_head {
+        struct list_head *next, *prev;
+};
+
+
+struct module_info
+{
+        unsigned long addr;
+        unsigned long size;
+        unsigned long flags;
+        long usecount;
+};
+
+
+struct module
+{
+        unsigned long size_of_struct;   /* == sizeof(module) */
+        struct module *next;
+        const char *name;
+        unsigned long size;
+
+        union
+        {
+                int usecount;
+                long pad;
+        } uc;                           /* Needs to keep its size - so says rth */
+
+        unsigned long flags;            /* AUTOCLEAN et al */
+
+        unsigned nsyms;
+        unsigned ndeps;
+
+        struct module_symbol *syms;
+        struct module_ref *deps;
+        struct module_ref *refs;
+        int (*init)(void);
+        void (*cleanup)(void);
+        const struct exception_table_entry *ex_table_start;
+        const struct exception_table_entry *ex_table_end;
+#ifdef __alpha__
+        unsigned long gp;
+#endif
+        /* Members past this point are extensions to the basic
+           module support and are optional.  Use mod_opt_member()
+           to examine them.  */
+        const struct module_persist *persist_start;
+        const struct module_persist *persist_end;
+        int (*can_unload)(void);
+};

pidfile.c

@@ -87 +87 @@
   int fd;
   int pid;
 
-  if ( ((fd = open(pidfile, O_RDWR|O_CREAT, 0644)) == -1)
+  if ( ((fd = open(pidfile, O_RDWR|O_CREAT|O_TRUNC, 0644)) == -1)
        || ((f = fdopen(fd, "r+")) == NULL) ) {
       fprintf(stderr, "Can't open or create %s.\n", pidfile);
       return 0;

README.1st

@@ -1 @@
-Very important information before using version 1.3
----------------------------------------------------
+Important information
+---------------------
 
 The included version of syslogd behaves in a slightly different manner
 to the one in former releases.  Please review the following important
@@ -63 +63 @@
   these scripts should remove all old .pid files found in /var/run.
   This will insure that klogd and syslogd start properly even if prior
   executions have been terminated harshly.
+
+* Large file support, i.e. support to write to log files that are
+  larger than 2 GB is not part of syslogd, but a matter of the Glibc
+  emitting different system calls to the kernel interface.  To support
+  large files you'll have to compile syslogd with the compiler defines
+  -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE so that glibc adjusts the
+  system calls.

README.linux

@@ -40 +40 @@
 a useful addition to the software gene pool.
 
 There is a mailing list covering this package and syslog in general.
-The lists address is sysklogd@Infodrom.North.DE .  To subscribe send a
-mail to Majordomo@Infodrom.North.DE with a line "subscribe sysklogd"
+The lists address is infodrom-sysklogd@lists.infodrom.org .  To subscribe send a
+mail to majordomo@lists.infodrom.org with a line "subscribe infodrom-sysklogd"
 in the message body.
 
-New versions of this package will be available at Joey's ftp server.
-ftp://ftp.infodrom.north.de/pub/people/joey/sysklogd/
+A second mailing list exists as infodrom-sysklogd-cvs@lists.infodrom.org.  Only
+CVS messages and diffs are distributed there. Whenever new code is added to
+sysklogd, CVS generates a mail from these changes which will be sent to
+this list.  Discussions will take place on the first list.
+
+The latest version of this software can be found at:
+http://www.infodrom.org/projects/sysklogd/download.php3
 
 Best regards,
 
@@ -67 +72 @@
 
 Martin Schulze
 Infodrom Oldenburg
-joey@linux.de
+joey@infodrom.org
 
-And a host of bug reporters whose contributions cannot be underestimated.
+And a number of bug reporters whose contributions cannot be underestimated.

sysklogd.8

@@ -84 +84 @@
 .B MAXFUNIX
 within the syslogd.c source file.  An example for a chroot() daemon is
 described by the people from OpenBSD at
-http://www.psionic.com/papers/dns.html.
+<http://www.guides.sk/psionic/dns/>.
 .TP
 .B "\-d"
 Turns on debug mode.  Using this the daemon will not proceed a 
@@ -117 +117 @@
 between two \fI-- MARK --\fR lines is 20 minutes.  This can be changed
 with this option.  Setting the
 .I interval
-to zero turns it off entirely.
+to zero turns it off entirely.  Depending on other log messages
+generated these lines may not be written consecutively.
 .TP
 .B "\-n"
 Avoid auto-backgrounding.  This is needed especially if the
@@ -364 +365 @@
 
 To avoid this in further times no messages that were received from a
 remote host are sent out to another (or the same) remote host
-anymore.  If there are scenarios where this doesn't make sense, please
-drop me (Joey) a line.
+anymore.  If you experience are setup in which this doesn't make
+sense, please use the
+.B \-h
+commandline switch.
 
 If the remote host is located in the same domain as the host, 
 .B syslogd

syslog.c

@@ -47 +47 @@
  * Sun Mar 11 20:23:44 CET 2001: Martin Schulze <joey@infodrom.ffis.de>
  *      Use SOCK_DGRAM for loggin, renables it to work. 
  *
+ * Wed Aug 27 17:48:16 CEST 2003: Martin Schulze <joey@Infodrom.org>
+ *      Improved patch by Michael Pomraning <mjp@securepipe.com> to
+ *      reconnect klogd to the logger after it went away.
  */
 
 #include <sys/types.h>
@@ -98 +101 @@
         register char *p;
         time_t now;
         int fd, saved_errno;
+        int result;
         char tbuf[2048], fmt_cpy[1024], *stdp = (char *) 0;
 
         saved_errno = errno;
@@ -167 +171 @@
         }
 
         /* output the message to the local logger */
-        if (write(LogFile, tbuf, cnt + 1) >= 0 || !(LogStat&LOG_CONS))
+        result = write(LogFile, tbuf, cnt + 1);
+
+        if (result == -1
+            && (errno == ECONNRESET || errno == ENOTCONN || errno == ECONNREFUSED)) {
+                closelog();
+                openlog(LogTag, LogStat | LOG_NDELAY, LogFacility);
+                result = write(LogFile, tbuf, cnt + 1);
+        }
+
+        if (result >= 0 || !(LogStat&LOG_CONS))
                 return;
 
         /*

syslog.conf.5

@@ -64 +64 @@
 The
 .I facility
 is one of the following keywords:
-.BR auth ", " authpriv ", " cron ", " daemon ", " kern ", " lpr ", "
+.BR auth ", " authpriv ", " cron ", " daemon ", " ftp ", " kern ", " lpr ", "
 .BR mail ", " mark ", " news ", " security " (same as " auth "), "
 .BR syslog ", " user ", " uucp " and " local0 " through " local7 .
 The keyword 
@@ -121 +121 @@
 
 This 
 .BR syslogd (8)
-has a syntax extension to the original BSD source, that makes its use
+has a syntax extension to the original BSD source, which makes its use
 more intuitively.  You may precede every priority with an equation sign
-(``='') to specify only this single priority and not any of the
-above.  You may also (both is valid, too) precede the priority with an
-exclamation mark (``!'') to ignore all that priorities, either exact
-this one or this and any higher priority.  If you use both extensions
+(``='') to specify that
+.B syslogd
+should only refer to this single priority and not this priority and
+all higher priorities.
+
+You may also precide the priority with an exclamation mark (``!'') if
+you want
+.B syslogd
+to ignore this priority and all higher priorities.
+You may even use both, the exclamation mark and the equation sign if
+you want
+.B syslogd
+to ignore only this single priority.  If you use both extensions
 than the exclamation mark must occur before the equation sign, just
 use it intuitively.
 
@@ -300 +309 @@
 .B syslogd
 log all messages that come with either the
 .BR info " or the " notice
-facility into the file
+priority into the file
 .IR /var/log/messages ,
 except for all messages that use the
 .B mail

syslogd.c

@@ -441 +441 @@
  *      Don't return a closed fd if `-a' is called with a wrong path.
  *      Thanks to Bill Nottingham <notting@redhat.com> for providing
  *      a patch.
+ * Thu Apr 13 05:08:10 CEST 2001: Jon Burgess <Jon_Burgess@eur.3com.com>
+ *      Moved the installation of the signal handler up a little bit
+ *      so it guaranteed to be available when the child is forked,
+ *      hence, fixing a  race condition.  This used to create problems
+ *      with UML and fast machines.
+ *
+ * Sat Apr 17 18:03:05 CEST 2004: Steve Grubb <linux_4ever@yahoo.com>
+ *      Correct memory allocation for for commandline arguments in
+ *      crunch_list().
+ *
+ * Thu Apr 29 12:38:39 CEST 2004: Solar Designer <solar@openwall.com>
+ *      Applied Openwall paranoia patches to improve crunch_list().
+ *
+ * Tue May  4 16:47:30 CEST 2004: Solar Designer <solar@openwall.com>
+ *      Ensure that "len" is not placed in a register, and that the
+ *      endtty() signal handler is not installed too early which could
+ *      cause a segmentation fault or worse.
+ *
+ * Tue May  4 16:52:01 CEST 2004: Solar Designer <solar@openwall.com>
+ *      Adjust the size of a variable to prevent a buffer overflow
+ *      should _PATH_DEV ever contain something different than "/dev/".
+ *
+ * Tue Nov  2 20:28:23 CET 2004: Colin Phipps <cph@cph.demon.co.uk>
+ *      Don't block on the network socket, in case a packet gets lost
+ *      between select and recv.
+ *
+ * Sun Nov  7 12:28:47 CET 2004: Martin Schulze <joey@infodrom.org>
+ *      Discard any timestamp information found in received syslog
+ *      messages.  This will affect local messages sent from a
+ *      different timezone.
+ *
+ * Sun Nov  7 13:47:00 CET 2004: Martin Schulze <joey@infodrom.org>
+ *      Remove trailing newline when forwarding messages.
  */
 
 
@@ -890 +923 @@
                 dprintf("Checking pidfile.\n");
                 if (!check_pid(PidFile))
                 {
+                        signal (SIGTERM, doexit);
                         if (fork()) {
                                 /*
                                  * Parent process
                                  */
-                                signal (SIGTERM, doexit);
                                 sleep(300);
                                 /*
                                  * Not reached unless something major went wrong.  5
@@ -992 +1025 @@
         (void) signal(SIGCHLD, reapchild);
         (void) signal(SIGALRM, domark);
         (void) signal(SIGUSR1, Debug ? debug_switch : SIG_IGN);
+        (void) signal(SIGXFSZ, SIG_IGN);
         (void) alarm(TIMERINTVL);
 
         /* Create a partial message table for all file descriptors. */
@@ -1141 +1175 @@
                                  */
                                 printchopped(from, line, \
                                              i + 2,  finet);
-                        } else if (i < 0 && errno != EINTR) {
+                        } else if (i < 0 && errno != EINTR && errno != EAGAIN) {
                                 dprintf("INET socket error: %d = %s.\n", \
                                         errno, strerror(errno));
                                 logerror("recvfrom inet");
                                 /* should be harmless now that we set
                                  * BSDCOMPAT on the socket */
-                                sleep(10);
+                                sleep(1);
                         }
                 }
 #endif
@@ -1216 +1250 @@
 {
         int fd, on = 1;
         struct sockaddr_in sin;
+        int sockflags;
 
         fd = socket(AF_INET, SOCK_DGRAM, 0);
         if (fd < 0) {
@@ -1241 +1276 @@
                 close(fd);
                 return -1;
         }
+        /* We must not block on the network socket, in case a packet
+         * gets lost between select and recv, otherise the process
+         * will stall until the timeout, and other processes trying to
+         * log will also stall.
+         */
+        if ((sockflags = fcntl(fd, F_GETFL)) != -1) {
+                sockflags |= O_NONBLOCK;
+                /*
+                 * SETFL could fail too, so get it caught by the subsequent
+                 * error check.
+                 */
+                sockflags = fcntl(fd, F_SETFL, sockflags);
+        }
+        if (sockflags == -1) {
+                logerror("fcntl(O_NONBLOCK), suspending inet");
+                close(fd);
+                return -1;
+        }
         if (bind(fd, (struct sockaddr *) &sin, sizeof(sin)) < 0) {
                 logerror("bind, suspending inet");
                 close(fd);
@@ -1254 +1307 @@
 crunch_list(list)
         char *list;
 {
-        int count, i;
+        int i, m, n;
         char *p, *q;
         char **result = NULL;
 
         p = list;
         
         /* strip off trailing delimiters */
-        while (p[strlen(p)-1] == LIST_DELIMITER) {
-                count--;
+        while (*p && p[strlen(p)-1] == LIST_DELIMITER)
                 p[strlen(p)-1] = '\0';
-        }
         /* cut off leading delimiters */
-        while (p[0] == LIST_DELIMITER) {
-                count--;
+        while (p[0] == LIST_DELIMITER)
                 p++; 
-        }
         
-        /* count delimiters to calculate elements */
-        for (count=i=0; p[i]; i++)
-                if (p[i] == LIST_DELIMITER) count++;
+        /* count delimiters to calculate the number of elements */
+        for (n = i = 0; p[i]; i++)
+                if (p[i] == LIST_DELIMITER) n++;
         
-        if ((result = (char **)malloc(sizeof(char *) * count+2)) == NULL) {
+        if ((result = (char **)malloc(sizeof(char *) * (n + 2))) == NULL) {
                 printf ("Sorry, can't get enough memory, exiting.\n");
-                exit(0);
+                exit(1);
         }
         
         /*
@@ -1285 +1334 @@
          * characters are different from any delimiters,
          * so we don't have to care about this.
          */
-        count = 0;
-        while ((q=strchr(p, LIST_DELIMITER))) {
-                result[count] = (char *) malloc((q - p + 1) * sizeof(char));
-                if (result[count] == NULL) {
+        m = 0;
+        while ((q = strchr(p, LIST_DELIMITER)) && m < n) {
+                result[m] = (char *) malloc((q - p + 1) * sizeof(char));
+                if (result[m] == NULL) {
                         printf ("Sorry, can't get enough memory, exiting.\n");
-                        exit(0);
+                        exit(1);
                 }
-                strncpy(result[count], p, q - p);
-                result[count][q - p] = '\0';
+                memcpy(result[m], p, q - p);
+                result[m][q - p] = '\0';
                 p = q; p++;
-                count++;
+                m++;
         }
-        if ((result[count] = \
-             (char *)malloc(sizeof(char) * strlen(p) + 1)) == NULL) {
+        if ((result[m] = strdup(p)) == NULL) {
                 printf ("Sorry, can't get enough memory, exiting.\n");
-                exit(0);
+                exit(1);
         }
-        strcpy(result[count],p);
-        result[++count] = NULL;
+        result[++m] = NULL;
 
 #if 0
-        count=0;
-        while (result[count])
-                dprintf ("#%d: %s\n", count, StripDomains[count++]);
+        m = 0;
+        while (result[m])
+                dprintf ("#%d: %s\n", m, result[m++]);
 #endif
         return result;
 }
@@ -1548 +1595 @@
 
         /*
          * Check to see if msg looks non-standard.
+         *
+         * A message looks like
+         * Nov 17 11:42:33 CRON[
+         * 01234567890123456
+         *    ^  ^  ^  ^  ^
+         *
+         * Remote messages are not accompanied by a timestamp.
+         * Local messages are accompanied by a timestamp (program's timezone)
          */
         msglen = strlen(msg);
-        if (msglen < 16 || msg[3] != ' ' || msg[6] != ' ' ||
-            msg[9] != ':' || msg[12] != ':' || msg[15] != ' ')
-                flags |= ADDDATE;
-
-        (void) time(&now);
-        if (flags & ADDDATE)
-                timestamp = ctime(&now) + 4;
-        else {
-                timestamp = msg;
+        if (!(msglen < 16 || msg[3] != ' ' || msg[6] != ' ' ||
+            msg[9] != ':' || msg[12] != ':' || msg[15] != ' ')) {
                 msg += 16;
                 msglen -= 16;
         }
 
+        (void) time(&now);
+        timestamp = ctime(&now) + 4;
+
         /* extract facility and priority level */
         if (flags & MARK)
                 fac = LOG_NFACILITIES;
@@ -1771 +1822 @@
                         dprintf("Not sending message to remote.\n");
                 else {
                         f->f_time = now;
-                        (void) snprintf(line, sizeof(line), "<%d>%s\n", f->f_prevpri, \
+                        (void) snprintf(line, sizeof(line), "<%d>%s", f->f_prevpri, \
                                 (char *) iov[4].iov_base);
                         l = strlen(line);
                         if (l > MAXLINE)
@@ -1815 +1866 @@
                         v->iov_len = 1;
                 }
         again:
-                /* f->f_file == -1 is an indicator that the we couldn't
+                /* f->f_file == -1 is an indicator that we couldn't
                    open the file at startup. */
                 if (f->f_file == -1)
                         break;
@@ -1852 +1903 @@
                                 errno = e;
                                 logerror(f->f_un.f_fname);
                         }
-                } else if (f->f_flags & SYNC_FILE)
+                } else if (f->f_type == F_FILE && (f->f_flags & SYNC_FILE))
                         (void) fsync(f->f_file);
                 break;
 
@@ -1891 +1942 @@
         register struct filed *f;
         struct iovec *iov;
 {
-        char p[6 + UNAMESZ];
+        char p[sizeof (_PATH_DEV) + UNAMESZ];
         register int i;
         int ttyf, len;
         static int reenter = 0;
@@ -1899 +1950 @@
         struct utmp *uptr;
         char greetings[200];
 
+        (void) &len;
+
         if (reenter++)
                 return;
 
@@ -1913 +1966 @@
         if (fork() == 0) {
                 (void) signal(SIGTERM, SIG_DFL);
                 (void) alarm(0);
-                (void) signal(SIGALRM, endtty);
 #ifndef SYSV
                 (void) signal(SIGTTOU, SIG_IGN);
                 (void) sigsetmask(0);
@@ -1929 +1981 @@
                         /* is this slot used? */
                         if (ut.ut_name[0] == '\0')
                                 continue;
-                        if (ut.ut_type == LOGIN_PROCESS)
+                        if (ut.ut_type != USER_PROCESS)
                                 continue;
                         if (!(strcmp (ut.ut_name,"LOGIN"))) /* paranoia */
                                 continue;
@@ -1959 +2011 @@
                                 iov[1].iov_len = 0;
                         }
                         if (setjmp(ttybuf) == 0) {
+                                (void) signal(SIGALRM, endtty);
                                 (void) alarm(15);
                                 /* open the terminal */
                                 ttyf = open(p, O_WRONLY|O_NOCTTY);