Submitted By: Jim Gifford Date: 2009-02-18 Initial Package Version: s20071127 Upstream Status: Unknown Origin: Jim Gifford Description: Provides the man pages (adding docbook2man with all its dependencies would be a major addition to the book, so I built it -once- on a completed system and saved the data). diff -Naur iputils-s20071127.orig/doc/arping.8 iputils-s20071127/doc/arping.8 --- iputils-s20071127.orig/doc/arping.8 1969-12-31 16:00:00.000000000 -0800 +++ iputils-s20071127/doc/arping.8 2009-02-18 23:20:33.249183964 -0800 @@ -0,0 +1,110 @@ +.\" This manpage has been automatically generated by docbook2man +.\" from a DocBook document. This tool can be found at: +.\" +.\" Please send any bug reports, improvements, comments, patches, +.\" etc. to Steve Cheng . +.TH "ARPING" "8" "18 February 2009" "iputils-071127" "System Manager's Manual: iputils" +.SH NAME +arping \- send ARP REQUEST to a neighbour host +.SH SYNOPSIS + +\fBarping\fR [\fB-AbDfhqUV\fR] [\fB-c \fIcount\fB\fR] [\fB-w \fIdeadline\fB\fR] [\fB-s \fIsource\fB\fR] \fB-I \fIinterface\fB\fR \fB\fIdestination\fB\fR + +.SH "DESCRIPTION" +.PP +Ping \fIdestination\fR on device \fIinterface\fR by ARP packets, +using source address \fIsource\fR. +.SH "OPTIONS" +.TP +\fB-A\fR +The same as \fB-U\fR, but ARP REPLY packets used instead +of ARP REQUEST. +.TP +\fB-b\fR +Send only MAC level broadcasts. Normally \fBarping\fR starts +from sending broadcast, and switch to unicast after reply received. +.TP +\fB-c \fIcount\fB\fR +Stop after sending \fIcount\fR ARP REQUEST +packets. With +\fIdeadline\fR +option, \fBarping\fR waits for +\fIcount\fR ARP REPLY packets, until the timeout expires. +.TP +\fB-D\fR +Duplicate address detection mode (DAD). See +RFC2131, 4.4.1. +Returns 0, if DAD succeeded i.e. no replies are received +.TP +\fB-f\fR +Finish after the first reply confirming that target is alive. +.TP +\fB-I \fIinterface\fB\fR +Name of network device where to send ARP REQUEST packets. This option +is required. +.TP +\fB-h\fR +Print help page and exit. +.TP +\fB-q\fR +Quiet output. Nothing is displayed. +.TP +\fB-s \fIsource\fB\fR +IP source address to use in ARP packets. +If this option is absent, source address is: +.RS +.TP 0.2i +\(bu +In DAD mode (with option \fB-D\fR) set to 0.0.0.0. +.TP 0.2i +\(bu +In Unsolicited ARP mode (with options \fB-U\fR or \fB-A\fR) +set to \fIdestination\fR. +.TP 0.2i +\(bu +Otherwise, it is calculated from routing tables. +.RE +.TP +\fB-U\fR +Unsolicited ARP mode to update neighbours' ARP caches. +No replies are expected. +.TP +\fB-V\fR +Print version of the program and exit. +.TP +\fB-w \fIdeadline\fB\fR +Specify a timeout, in seconds, before +\fBarping\fR +exits regardless of how many +packets have been sent or received. In this case +\fBarping\fR +does not stop after +\fIcount\fR +packet are sent, it waits either for +\fIdeadline\fR +expire or until +\fIcount\fR +probes are answered. +.SH "SEE ALSO" +.PP +\fBping\fR(8), +\fBclockdiff\fR(8), +\fBtracepath\fR(8). +.SH "AUTHOR" +.PP +\fBarping\fR was written by +Alexey Kuznetsov +. +It is now maintained by +YOSHIFUJI Hideaki +. +.SH "SECURITY" +.PP +\fBarping\fR requires CAP_NET_RAWIO capability +to be executed. It is not recommended to be used as set-uid root, +because it allows user to modify ARP caches of neighbour hosts. +.SH "AVAILABILITY" +.PP +\fBarping\fR is part of \fIiputils\fR package +and the latest versions are available in source form at +http://www.skbuff.net/iputils/iputils-current.tar.bz2. diff -Naur iputils-s20071127.orig/doc/clockdiff.8 iputils-s20071127/doc/clockdiff.8 --- iputils-s20071127.orig/doc/clockdiff.8 1969-12-31 16:00:00.000000000 -0800 +++ iputils-s20071127/doc/clockdiff.8 2009-02-18 23:20:33.249183964 -0800 @@ -0,0 +1,81 @@ +.\" This manpage has been automatically generated by docbook2man +.\" from a DocBook document. This tool can be found at: +.\" +.\" Please send any bug reports, improvements, comments, patches, +.\" etc. to Steve Cheng . +.TH "CLOCKDIFF" "8" "18 February 2009" "iputils-071127" "System Manager's Manual: iputils" +.SH NAME +clockdiff \- measure clock difference between hosts +.SH SYNOPSIS + +\fBclockdiff\fR [\fB-o\fR] [\fB-o1\fR] \fB\fIdestination\fB\fR + +.SH "DESCRIPTION" +.PP +\fBclockdiff\fR Measures clock difference between us and +\fIdestination\fR with 1 msec resolution using ICMP TIMESTAMP +[2] +packets or, optionally, IP TIMESTAMP option +[3] +option added to ICMP ECHO. +[1] +.SH "OPTIONS" +.TP +\fB-o\fR +Use IP TIMESTAMP with ICMP ECHO instead of ICMP TIMESTAMP +messages. It is useful with some destinations, which do not support +ICMP TIMESTAMP (f.e. Solaris <2.4). +.TP +\fB-o1\fR +Slightly different form of \fB-o\fR, namely it uses three-term +IP TIMESTAMP with prespecified hop addresses instead of four term one. +What flavor works better depends on target host. Particularly, +\fB-o\fR is better for Linux. +.SH "WARNINGS" +.TP 0.2i +\(bu +Some nodes (Cisco) use non-standard timestamps, which is allowed +by RFC, but makes timestamps mostly useless. +.TP 0.2i +\(bu +Some nodes generate messed timestamps (Solaris>2.4), when +run \fBxntpd\fR. Seems, its IP stack uses a corrupted clock source, +which is synchronized to time-of-day clock periodically and jumps +randomly making timestamps mostly useless. Good news is that you can +use NTP in this case, which is even better. +.TP 0.2i +\(bu +\fBclockdiff\fR shows difference in time modulo 24 days. +.SH "SEE ALSO" +.PP +\fBping\fR(8), +\fBarping\fR(8), +\fBtracepath\fR(8). +.SH "REFERENCES" +.PP +[1] ICMP ECHO, +RFC0792, page 14. +.PP +[2] ICMP TIMESTAMP, +RFC0792, page 16. +.PP +[3] IP TIMESTAMP option, +RFC0791, 3.1, page 16. +.SH "AUTHOR" +.PP +\fBclockdiff\fR was compiled by +Alexey Kuznetsov +. It was based on code borrowed +from BSD \fBtimed\fR daemon. +It is now maintained by +YOSHIFUJI Hideaki +. +.SH "SECURITY" +.PP +\fBclockdiff\fR requires CAP_NET_RAWIO capability +to be executed. It is safe to be used as set-uid root. +.SH "AVAILABILITY" +.PP +\fBclockdiff\fR is part of \fIiputils\fR package +and the latest versions are available in source form at +http://www.skbuff.net/iputils/iputils-current.tar.bz2. diff -Naur iputils-s20071127.orig/doc/ping.8 iputils-s20071127/doc/ping.8 --- iputils-s20071127.orig/doc/ping.8 1969-12-31 16:00:00.000000000 -0800 +++ iputils-s20071127/doc/ping.8 2009-02-18 23:20:33.249183964 -0800 @@ -0,0 +1,332 @@ +.\" This manpage has been automatically generated by docbook2man +.\" from a DocBook document. This tool can be found at: +.\" +.\" Please send any bug reports, improvements, comments, patches, +.\" etc. to Steve Cheng . +.TH "PING" "8" "18 February 2009" "iputils-071127" "System Manager's Manual: iputils" +.SH NAME +ping, ping6 \- send ICMP ECHO_REQUEST to network hosts +.SH SYNOPSIS + +\fBping\fR [\fB-LRUbdfnqrvVaAB\fR] [\fB-c \fIcount\fB\fR] [\fB-i \fIinterval\fB\fR] [\fB-l \fIpreload\fB\fR] [\fB-p \fIpattern\fB\fR] [\fB-s \fIpacketsize\fB\fR] [\fB-t \fIttl\fB\fR] [\fB-w \fIdeadline\fB\fR] [\fB-F \fIflowlabel\fB\fR] [\fB-I \fIinterface\fB\fR] [\fB-M \fIhint\fB\fR] [\fB-Q \fItos\fB\fR] [\fB-S \fIsndbuf\fB\fR] [\fB-T \fItimestamp option\fB\fR] [\fB-W \fItimeout\fB\fR] [\fB\fIhop\fB\fR\fI ...\fR] \fB\fIdestination\fB\fR + +.SH "DESCRIPTION" +.PP +\fBping\fR uses the ICMP protocol's mandatory ECHO_REQUEST +datagram to elicit an ICMP ECHO_RESPONSE from a host or gateway. +ECHO_REQUEST datagrams (``pings'') have an IP and ICMP +header, followed by a struct timeval and then an arbitrary +number of ``pad'' bytes used to fill out the packet. +.SH "OPTIONS" +.TP +\fB-a\fR +Audible ping. +.TP +\fB-A\fR +Adaptive ping. Interpacket interval adapts to round-trip time, so that +effectively not more than one (or more, if preload is set) unanswered probes +present in the network. Minimal interval is 200msec for not super-user. +On networks with low rtt this mode is essentially equivalent to flood mode. +.TP +\fB-b\fR +Allow pinging a broadcast address. +.TP +\fB-B\fR +Do not allow \fBping\fR to change source address of probes. +The address is bound to one selected when \fBping\fR starts. +.TP +\fB-c \fIcount\fB\fR +Stop after sending \fIcount\fR ECHO_REQUEST +packets. With +\fIdeadline\fR +option, \fBping\fR waits for +\fIcount\fR ECHO_REPLY packets, until the timeout expires. +.TP +\fB-d\fR +Set the SO_DEBUG option on the socket being used. +Essentially, this socket option is not used by Linux kernel. +.TP +\fB-F \fIflow label\fB\fR +Allocate and set 20 bit flow label on echo request packets. +(Only \fBping6\fR). If value is zero, kernel allocates random flow label. +.TP +\fB-f\fR +Flood ping. For every ECHO_REQUEST sent a period ``.'' is printed, +while for ever ECHO_REPLY received a backspace is printed. +This provides a rapid display of how many packets are being dropped. +If interval is not given, it sets interval to zero and +outputs packets as fast as they come back or one hundred times per second, +whichever is more. +Only the super-user may use this option with zero interval. +.TP +\fB-i \fIinterval\fB\fR +Wait \fIinterval\fR seconds between sending each packet. +The default is to wait for one second between each packet normally, +or not to wait in flood mode. Only super-user may set interval +to values less 0.2 seconds. +.TP +\fB-I \fIinterface address\fB\fR +Set source address to specified interface address. Argument +may be numeric IP address or name of device. When pinging IPv6 +link-local address this option is required. +.TP +\fB-l \fIpreload\fB\fR +If \fIpreload\fR is specified, +\fBping\fR sends that many packets not waiting for reply. +Only the super-user may select preload more than 3. +.TP +\fB-L\fR +Suppress loopback of multicast packets. This flag only applies if the ping +destination is a multicast address. +.TP +\fB-n\fR +Numeric output only. +No attempt will be made to lookup symbolic names for host addresses. +.TP +\fB-p \fIpattern\fB\fR +You may specify up to 16 ``pad'' bytes to fill out the packet you send. +This is useful for diagnosing data-dependent problems in a network. +For example, \fB-p ff\fR will cause the sent packet +to be filled with all ones. +.TP +\fB-Q \fItos\fB\fR +Set Quality of Service -related bits in ICMP datagrams. +\fItos\fR can be either decimal or hex number. +Traditionally (RFC1349), these have been interpreted as: 0 for reserved +(currently being redefined as congestion control), 1-4 for Type of Service +and 5-7 for Precedence. +Possible settings for Type of Service are: minimal cost: 0x02, +reliability: 0x04, throughput: 0x08, low delay: 0x10. Multiple TOS bits +should not be set simultaneously. Possible settings for +special Precedence range from priority (0x20) to net control (0xe0). You +must be root (CAP_NET_ADMIN capability) to use Critical or +higher precedence value. You cannot set +bit 0x01 (reserved) unless ECN has been enabled in the kernel. +In RFC2474, these fields has been redefined as 8-bit Differentiated +Services (DS), consisting of: bits 0-1 of separate data (ECN will be used, +here), and bits 2-7 of Differentiated Services Codepoint (DSCP). +.TP +\fB-q\fR +Quiet output. +Nothing is displayed except the summary lines at startup time and +when finished. +.TP +\fB-R\fR +Record route. +Includes the RECORD_ROUTE option in the ECHO_REQUEST +packet and displays the route buffer on returned packets. +Note that the IP header is only large enough for nine such routes. +Many hosts ignore or discard this option. +.TP +\fB-r\fR +Bypass the normal routing tables and send directly to a host on an attached +interface. +If the host is not on a directly-attached network, an error is returned. +This option can be used to ping a local host through an interface +that has no route through it provided the option \fB-I\fR is also +used. +.TP +\fB-s \fIpacketsize\fB\fR +Specifies the number of data bytes to be sent. +The default is 56, which translates into 64 ICMP +data bytes when combined with the 8 bytes of ICMP header data. +.TP +\fB-S \fIsndbuf\fB\fR +Set socket sndbuf. If not specified, it is selected to buffer +not more than one packet. +.TP +\fB-t \fIttl\fB\fR +Set the IP Time to Live. +.TP +\fB-T \fItimestamp option\fB\fR +Set special IP timestamp options. +\fItimestamp option\fR may be either +\fItsonly\fR (only timestamps), +\fItsandaddr\fR (timestamps and addresses) or +\fItsprespec host1 [host2 [host3 [host4]]]\fR +(timestamp prespecified hops). +.TP +\fB-M \fIhint\fB\fR +Select Path MTU Discovery strategy. +\fIhint\fR may be either \fIdo\fR +(prohibit fragmentation, even local one), +\fIwant\fR (do PMTU discovery, fragment locally when packet size +is large), or \fIdont\fR (do not set DF flag). +.TP +\fB-U\fR +Print full user-to-user latency (the old behaviour). Normally +\fBping\fR +prints network round trip time, which can be different +f.e. due to DNS failures. +.TP +\fB-v\fR +Verbose output. +.TP +\fB-V\fR +Show version and exit. +.TP +\fB-w \fIdeadline\fB\fR +Specify a timeout, in seconds, before +\fBping\fR +exits regardless of how many +packets have been sent or received. In this case +\fBping\fR +does not stop after +\fIcount\fR +packet are sent, it waits either for +\fIdeadline\fR +expire or until +\fIcount\fR +probes are answered or for some error notification from network. +.TP +\fB-W \fItimeout\fB\fR +Time to wait for a response, in seconds. The option affects only timeout +in absense of any responses, otherwise \fBping\fR waits for two RTTs. +.PP +When using \fBping\fR for fault isolation, it should first be run +on the local host, to verify that the local network interface is up +and running. Then, hosts and gateways further and further away should be +``pinged''. Round-trip times and packet loss statistics are computed. +If duplicate packets are received, they are not included in the packet +loss calculation, although the round trip time of these packets is used +in calculating the minimum/average/maximum round-trip time numbers. +When the specified number of packets have been sent (and received) or +if the program is terminated with a +SIGINT, a brief summary is displayed. Shorter current statistics +can be obtained without termination of process with signal +SIGQUIT. +.PP +If \fBping\fR does not receive any reply packets at all it will +exit with code 1. If a packet +\fIcount\fR +and +\fIdeadline\fR +are both specified, and fewer than +\fIcount\fR +packets are received by the time the +\fIdeadline\fR +has arrived, it will also exit with code 1. +On other error it exits with code 2. Otherwise it exits with code 0. This +makes it possible to use the exit code to see if a host is alive or +not. +.PP +This program is intended for use in network testing, measurement and +management. +Because of the load it can impose on the network, it is unwise to use +\fBping\fR during normal operations or from automated scripts. +.SH "ICMP PACKET DETAILS" +.PP +An IP header without options is 20 bytes. +An ICMP ECHO_REQUEST packet contains an additional 8 bytes worth +of ICMP header followed by an arbitrary amount of data. +When a \fIpacketsize\fR is given, this indicated the size of this +extra piece of data (the default is 56). Thus the amount of data received +inside of an IP packet of type ICMP ECHO_REPLY will always be 8 bytes +more than the requested data space (the ICMP header). +.PP +If the data space is at least of size of struct timeval +\fBping\fR uses the beginning bytes of this space to include +a timestamp which it uses in the computation of round trip times. +If the data space is shorter, no round trip times are given. +.SH "DUPLICATE AND DAMAGED PACKETS" +.PP +\fBping\fR will report duplicate and damaged packets. +Duplicate packets should never occur, and seem to be caused by +inappropriate link-level retransmissions. +Duplicates may occur in many situations and are rarely (if ever) a +good sign, although the presence of low levels of duplicates may not +always be cause for alarm. +.PP +Damaged packets are obviously serious cause for alarm and often +indicate broken hardware somewhere in the +\fBping\fR packet's path (in the network or in the hosts). +.SH "TRYING DIFFERENT DATA PATTERNS" +.PP +The (inter)network layer should never treat packets differently depending +on the data contained in the data portion. +Unfortunately, data-dependent problems have been known to sneak into +networks and remain undetected for long periods of time. +In many cases the particular pattern that will have problems is something +that doesn't have sufficient ``transitions'', such as all ones or all +zeros, or a pattern right at the edge, such as almost all zeros. +It isn't necessarily enough to specify a data pattern of all zeros (for +example) on the command line because the pattern that is of interest is +at the data link level, and the relationship between what you type and +what the controllers transmit can be complicated. +.PP +This means that if you have a data-dependent problem you will probably +have to do a lot of testing to find it. +If you are lucky, you may manage to find a file that either can't be sent +across your network or that takes much longer to transfer than other +similar length files. +You can then examine this file for repeated patterns that you can test +using the \fB-p\fR option of \fBping\fR. +.SH "TTL DETAILS" +.PP +The TTL value of an IP packet represents the maximum number of IP routers +that the packet can go through before being thrown away. +In current practice you can expect each router in the Internet to decrement +the TTL field by exactly one. +.PP +The TCP/IP specification states that the TTL field for TCP +packets should be set to 60, but many systems use smaller values +(4.3 BSD uses 30, 4.2 used 15). +.PP +The maximum possible value of this field is 255, and most Unix systems set +the TTL field of ICMP ECHO_REQUEST packets to 255. +This is why you will find you can ``ping'' some hosts, but not reach them +with +\fBtelnet\fR(1) +or +\fBftp\fR(1). +.PP +In normal operation ping prints the ttl value from the packet it receives. +When a remote system receives a ping packet, it can do one of three things +with the TTL field in its response: +.TP 0.2i +\(bu +Not change it; this is what Berkeley Unix systems did before the +4.3BSD Tahoe release. In this case the TTL value in the received packet +will be 255 minus the number of routers in the round-trip path. +.TP 0.2i +\(bu +Set it to 255; this is what current Berkeley Unix systems do. +In this case the TTL value in the received packet will be 255 minus the +number of routers in the path \fBfrom\fR +the remote system \fBto\fR the \fBping\fRing host. +.TP 0.2i +\(bu +Set it to some other value. Some machines use the same value for +ICMP packets that they use for TCP packets, for example either 30 or 60. +Others may use completely wild values. +.SH "BUGS" +.TP 0.2i +\(bu +Many Hosts and Gateways ignore the RECORD_ROUTE option. +.TP 0.2i +\(bu +The maximum IP header length is too small for options like +RECORD_ROUTE to be completely useful. +There's not much that that can be done about this, however. +.TP 0.2i +\(bu +Flood pinging is not recommended in general, and flood pinging the +broadcast address should only be done under very controlled conditions. +.SH "SEE ALSO" +.PP +\fBnetstat\fR(1), +\fBifconfig\fR(8). +.SH "HISTORY" +.PP +The \fBping\fR command appeared in 4.3BSD. +.PP +The version described here is its descendant specific to Linux. +.SH "SECURITY" +.PP +\fBping\fR requires CAP_NET_RAWIO capability +to be executed. It may be used as set-uid root. +.SH "AVAILABILITY" +.PP +\fBping\fR is part of \fIiputils\fR package +and the latest versions are available in source form at +http://www.skbuff.net/iputils/iputils-current.tar.bz2. diff -Naur iputils-s20071127.orig/doc/rdisc.8 iputils-s20071127/doc/rdisc.8 --- iputils-s20071127.orig/doc/rdisc.8 1969-12-31 16:00:00.000000000 -0800 +++ iputils-s20071127/doc/rdisc.8 2009-02-18 23:20:33.249183964 -0800 @@ -0,0 +1,110 @@ +.\" This manpage has been automatically generated by docbook2man +.\" from a DocBook document. This tool can be found at: +.\" +.\" Please send any bug reports, improvements, comments, patches, +.\" etc. to Steve Cheng . +.TH "RDISC" "8" "18 February 2009" "iputils-071127" "System Manager's Manual: iputils" +.SH NAME +rdisc \- network router discovery daemon +.SH SYNOPSIS + +\fBrdisc\fR [\fB-abdfstvV\fR] [\fB\fIsend_address\fB\fR] [\fB\fIreceive_address\fB\fR] + +.SH "DESCRIPTION" +.PP +\fBrdisc\fR implements client side of the ICMP router discover protocol. +\fBrdisc\fR is invoked at boot time to populate the network +routing tables with default routes. +.PP +\fBrdisc\fR listens on the ALL_HOSTS (224.0.0.1) multicast address +(or \fIreceive_address\fR provided it is given) +for ROUTER_ADVERTISE messages from routers. The received +messages are handled by first ignoring those listed router addresses +with which the host does not share a network. Among the remaining addresses +the ones with the highest preference are selected as default routers +and a default route is entered in the kernel routing table +for each one of them. +.PP +Optionally, \fBrdisc\fR can avoid waiting for routers to announce +themselves by sending out a few ROUTER_SOLICITATION messages +to the ALL_ROUTERS (224.0.0.2) multicast address +(or \fIsend_address\fR provided it is given) +when it is started. +.PP +A timer is associated with each router address and the address will +no longer be considered for inclusion in the the routing tables if the +timer expires before a new +\fBadvertise\fR message is received from the router. +The address will also be excluded from consideration if the host receives an +\fBadvertise\fR +message with the preference being maximally negative. +.PP +Server side of router discovery protocol is supported by Cisco IOS +and by any more or less complete UNIX routing daemon, f.e \fBgated\fR. +.SH "OPTIONS" +.TP +\fB-a\fR +Accept all routers independently of the preference they have in their +\fBadvertise\fR messages. +Normally \fBrdisc\fR only accepts (and enters in the kernel routing +tables) the router or routers with the highest preference. +.TP +\fB-b\fR +Opposite to \fB-a\fR, i.e. install only router with the best +preference value. It is default behaviour. +.TP +\fB-d\fR +Send debugging messages to syslog. +.TP +\fB-f\fR +Run \fBrdisc\fR forever even if no routers are found. +Normally \fBrdisc\fR gives up if it has not received any +\fBadvertise\fR message after after soliciting three times, +in which case it exits with a non-zero exit code. +If \fB-f\fR is not specified in the first form then +\fB-s\fR must be specified. +.TP +\fB-s\fR +Send three \fBsolicitation\fR messages initially to quickly discover +the routers when the system is booted. +When \fB-s\fR is specified \fBrdisc\fR +exits with a non-zero exit code if it can not find any routers. +This can be overridden with the \fB-f\fR option. +.TP +\fB-t\fR +Test mode. Do not go to background. +.TP +\fB-v\fR +Be verbose i.e. send lots of debugging messages to syslog. +.TP +\fB-V\fR +Print version and exit. +.SH "HISTORY" +.PP +This program was developed by Sun Microsystems (see copyright +notice in source file). It was ported to Linux by +Alexey Kuznetsov +. +It is now maintained by +YOSHIFUJI Hideaki +. +.SH "SEE ALSO" +.PP +\fBicmp\fR(7), +\fBinet\fR(7), +\fBping\fR(8). +.SH "REFERENCES" +.PP +Deering, S.E.,ed "ICMP Router Discovery Messages", +RFC1256, Network Information Center, SRI International, +Menlo Park, Calif., September 1991. +.SH "SECURITY" +.PP +\fBrdisc\fR requires CAP_NET_RAWIO to listen +and send ICMP messages and capability CAP_NET_ADMIN +to update routing tables. +.SH "AVAILABILITY" +.PP +\fBrdisc\fR is part of \fIiputils\fR package +and the latest versions are available in source form at +http://www.skbuff.net/iputils/iputils-current.tar.bz2. diff -Naur iputils-s20071127.orig/doc/tracepath.8 iputils-s20071127/doc/tracepath.8 --- iputils-s20071127.orig/doc/tracepath.8 1969-12-31 16:00:00.000000000 -0800 +++ iputils-s20071127/doc/tracepath.8 2009-02-18 23:21:37.765316105 -0800 @@ -0,0 +1,94 @@ +.\" This manpage has been automatically generated by docbook2man +.\" from a DocBook document. This tool can be found at: +.\" +.\" Please send any bug reports, improvements, comments, patches, +.\" etc. to Steve Cheng . +.TH "TRACEPATH" "8" "18 February 2009" "iputils-071127" "System Manager's Manual: iputils" +.SH NAME +tracepath, tracepath6 \- traces path to a network host discovering MTU along this path +.SH SYNOPSIS + +\fBtracepath\fR [\fB-n\fR] [\fB-l \fIpktlen\fB\fR] \fB\fIdestination\fB\fR [\fB\fIport\fB\fR] + +.SH "DESCRIPTION" +.PP +It traces path to \fIdestination\fR discovering MTU along this path. +It uses UDP port \fIport\fR or some random port. +It is similar to \fBtraceroute\fR, only does not not require superuser +privileges and has no fancy options. +.PP +\fBtracepath6\fR is good replacement for \fBtraceroute6\fR +and classic example of application of Linux error queues. +The situation with \fBtracepath\fR is worse, because commercial +IP routers do not return enough information in icmp error messages. +Probably, it will change, when they will be updated. +For now it uses Van Jacobson's trick, sweeping a range +of UDP ports to maintain trace history. +.SH "OPTIONS" +.TP +\fB-n\fR +Do not look up host names. Only print IP addresses numerically. +.TP +\fB-l\fR +Sets the initial packet length to \fIpktlen\fR instead of +65536 for \fBtracepath\fR or 128000 for \fBtracepath6\fR. +.SH "OUTPUT" +.PP + +.nf +root@mops:~ # tracepath6 3ffe:2400:0:109::2 + 1?: [LOCALHOST] pmtu 1500 + 1: dust.inr.ac.ru 0.411ms + 2: dust.inr.ac.ru asymm 1 0.390ms pmtu 1480 + 2: 3ffe:2400:0:109::2 463.514ms reached + Resume: pmtu 1480 hops 2 back 2 +.fi +.PP +The first column shows TTL of the probe, followed by colon. +Usually value of TTL is obtained from reply from network, +but sometimes reply does not contain necessary information and +we have to guess it. In this case the number is followed by ?. +.PP +The second column shows the network hop, which replied to the probe. +It is either address of router or word [LOCALHOST], if +the probe was not sent to the network. +.PP +The rest of line shows miscellaneous information about path to +the correspinding hetwork hop. As rule it contains value of RTT. +Additionally, it can show Path MTU, when it changes. +If the path is asymmetric +or the probe finishes before it reach prescribed hop, difference +between number of hops in forward and backward direction is shown +folloing keyword async. This information is not reliable. +F.e. the third line shows asymmetry of 1, it is because the first probe +with TTL of 2 was rejected at the first hop due to Path MTU Discovery. +.PP +The last line summarizes information about all the path to the destination, +it shows detected Path MTU, amount of hops to the destination and our +guess about amount of hops from the destination to us, which can be +different when the path is asymmetric. +.SH "SEE ALSO" +.PP +\fBtraceroute\fR(8), +\fBtraceroute6\fR(8), +\fBping\fR(8). +.SH "AUTHOR" +.PP +\fBtracepath\fR was written by +Alexey Kuznetsov +. +.SH "SECURITY" +.PP +No security issues. +.PP +This lapidary deserves to be elaborated. +\fBtracepath\fR is not a privileged program, unlike +\fBtraceroute\fR, \fBping\fR and other beasts of this kind. +\fBtracepath\fR may be executed by everyone who has some access +to network, enough to send UDP datagrams to investigated destination +using given port. +.SH "AVAILABILITY" +.PP +\fBtracepath\fR is part of \fIiputils\fR package +and the latest versions are available in source form at +http://www.skbuff.net/iputils/iputils-current.tar.bz2. diff -Naur iputils-s20071127.orig/doc/traceroute6.8 iputils-s20071127/doc/traceroute6.8 --- iputils-s20071127.orig/doc/traceroute6.8 1969-12-31 16:00:00.000000000 -0800 +++ iputils-s20071127/doc/traceroute6.8 2009-02-18 23:20:33.249183964 -0800 @@ -0,0 +1,42 @@ +.\" This manpage has been automatically generated by docbook2man +.\" from a DocBook document. This tool can be found at: +.\" +.\" Please send any bug reports, improvements, comments, patches, +.\" etc. to Steve Cheng . +.TH "TRACEROUTE6" "8" "18 February 2009" "iputils-071127" "System Manager's Manual: iputils" +.SH NAME +traceroute6 \- traces path to a network host +.SH SYNOPSIS + +\fBtraceroute6\fR [\fB-dnrvV\fR] [\fB-i \fIinterface\fB\fR] [\fB-m \fImax_ttl\fB\fR] [\fB-p \fIport\fB\fR] [\fB-q \fImax_probes\fB\fR] [\fB-s \fIsource\fB\fR] [\fB-w \fIwait time\fB\fR] \fB\fIdestination\fB\fR [\fB\fIsize\fB\fR] + +.SH "DESCRIPTION" +.PP +Description can be found in +\fBtraceroute\fR(8), +all the references to IP replaced to IPv6. It is needless to copy +the description from there. +.SH "SEE ALSO" +.PP +\fBtraceroute\fR(8), +\fBtracepath\fR(8), +\fBping\fR(8). +.SH "HISTORY" +.PP +This program has long history. Author of \fBtraceroute\fR +is Van Jacobson and it first appeared in 1988. This clone is +based on a port of \fBtraceroute\fR to IPv6 published +in NRL IPv6 distribution in 1996. In turn, it was ported +to Linux by Pedro Roque. After this it was kept in sync by +Alexey Kuznetsov +. And eventually entered +\fBiputils\fR package. +.SH "SECURITY" +.PP +\fBtracepath6\fR requires CAP_NET_RAWIO capability +to be executed. It is safe to be used as set-uid root. +.SH "AVAILABILITY" +.PP +\fBtraceroute6\fR is part of \fIiputils\fR package +and the latest versions are available in source form at +http://www.skbuff.net/iputils/iputils-current.tar.bz2.