source: clfs-sysroot/BOOK/final-system/common/kbd.xml@ bad66e0

<?xml version="1.0" encoding="ISO-8859-1"?>
<!DOCTYPE sect1 PUBLIC "-//OASIS//DTD DocBook XML V4.5//EN"
  "http://www.oasis-open.org/docbook/xml/4.5/docbookx.dtd" [
  <!ENTITY % general-entities SYSTEM "../../general.ent">
  %general-entities;
]>

<sect1 id="ch-system-kbd" role="wrap">
  <?dbhtml filename="kbd.html"?>

  <title>Kbd-&kbd-version;</title>

  <indexterm zone="ch-system-kbd">
    <primary sortas="a-Kbd">Kbd</primary>
  </indexterm>

  <sect2 role="package">
    <title/>

    <para>The Kbd package contains key-table files and keyboard
    utilities.</para>

  </sect2>

  <sect2 role="installation">
    <title>Installation of Kbd</title>

    <para os="cc1">When Cross Compiling the configure script does not
    run a select few tests, Set the values manually:</para>

<screen os="cc1"><userinput>cat &gt; config.cache &lt;&lt; EOF
ac_cv_func_setpgrp_void=yes
ac_cv_func_malloc_0_nonnull=yes
ac_cv_func_realloc_0_nonnull=yes
EOF</userinput></screen>

    <para os="a">Prepare Kbd for compilation:</para>

<screen os="b"><userinput>./configure --build=${CLFS_HOST} --host=${CLFS_TARGET} \
    --prefix=/usr --cache-file=config.cache</userinput></screen>

    <para os="d">Compile the package:</para>

<screen os="e"><userinput>make</userinput></screen>

    <para os="f">Install the package:</para>

<screen os="g"><userinput>make DESTDIR=${CLFS} install</userinput></screen>

    <para os="h">Some of the Programs from Kbd are used by some of the scripts
    in the CLFS-Bootscripts package. As <filename
    class="directory">/usr</filename> may not be available during the early
    stages of booting, those binaries need to be on the root partition:</para>

<screen os="i"><userinput>mv -v ${CLFS}/usr/bin/{kbd_mode,dumpkeys,loadkeys,openvt,setfont} ${CLFS}/bin</userinput></screen>

  </sect2>

  <sect2 id="contents-kbd" role="content">
    <title>Contents of Kbd</title>

    <segmentedlist>
      <segtitle>Installed programs</segtitle>

      <seglistitem>
        <seg>chvt, deallocvt, dumpkeys, fgconsole, getkeycodes, kbd_mode,
        kbdrate, loadkeys, loadunimap, mapscrn, openvt, psfaddtable
        (link to psfxtable), psfgettable (link to psfxtable), psfstriptable
        (link to psfxtable), psfxtable, resizecons, setfont, setkeycodes,
        setleds, setmetamode, showconsolefont, showkey, unicode_start, and
        unicode_stop</seg>
      </seglistitem>
    </segmentedlist>

    <variablelist>
      <bridgehead renderas="sect3">Short Descriptions</bridgehead>
      <?dbfo list-presentation="list"?>
      <?dbhtml list-presentation="table"?>

      <varlistentry id="chvt">
        <term><command>chvt</command></term>
        <listitem>
          <para>Changes the foreground virtual terminal</para>
          <indexterm zone="ch-system-kbd chvt">
            <primary sortas="b-chvt">chvt</primary>
          </indexterm>
        </listitem>
      </varlistentry>

      <varlistentry id="deallocvt">
        <term><command>deallocvt</command></term>
        <listitem>
          <para>Deallocates unused virtual terminals</para>
          <indexterm zone="ch-system-kbd deallocvt">
            <primary sortas="b-deallocvt">deallocvt</primary>
          </indexterm>
        </listitem>
      </varlistentry>

      <varlistentry id="dumpkeys">
        <term><command>dumpkeys</command></term>
        <listitem>
          <para>Dumps the keyboard translation tables</para>
          <indexterm zone="ch-system-kbd dumpkeys">
            <primary sortas="b-dumpkeys">dumpkeys</primary>
          </indexterm>
        </listitem>
      </varlistentry>

      <varlistentry id="fgconsole">
        <term><command>fgconsole</command></term>
        <listitem>
          <para>Prints the number of the active virtual terminal</para>
          <indexterm zone="ch-system-kbd fgconsole">
            <primary sortas="b-fgconsole">fgconsole</primary>
          </indexterm>
        </listitem>
      </varlistentry>

      <varlistentry id="getkeycodes">
        <term><command>getkeycodes</command></term>
        <listitem>
          <para>Prints the kernel scancode-to-keycode mapping table</para>
          <indexterm zone="ch-system-kbd getkeycodes">
            <primary sortas="b-getkeycodes">getkeycodes</primary>
          </indexterm>
        </listitem>
      </varlistentry>

      <varlistentry id="kbd_mode">
        <term><command>kbd_mode</command></term>
        <listitem>
          <para>Reports or sets the keyboard mode</para>
          <indexterm zone="ch-system-kbd kbd_mode">
            <primary sortas="b-kbd_mode">kbd_mode</primary>
          </indexterm>
        </listitem>
      </varlistentry>

      <varlistentry id="kbdrate">
        <term><command>kbdrate</command></term>
        <listitem>
          <para>Sets the keyboard repeat and delay rates</para>
          <indexterm zone="ch-system-kbd kbdrate">
            <primary sortas="b-kbdrate">kbdrate</primary>
          </indexterm>
        </listitem>
      </varlistentry>

      <varlistentry id="loadkeys">
        <term><command>loadkeys</command></term>
        <listitem>
          <para>Loads the keyboard translation tables</para>
          <indexterm zone="ch-system-kbd loadkeys">
            <primary sortas="b-loadkeys">loadkeys</primary>
          </indexterm>
        </listitem>
      </varlistentry>

      <varlistentry id="loadunimap">
        <term><command>loadunimap</command></term>
        <listitem>
          <para>Loads the kernel unicode-to-font mapping table</para>
          <indexterm zone="ch-system-kbd loadunimap">
            <primary sortas="b-loadunimap">loadunimap</primary>
          </indexterm>
        </listitem>
      </varlistentry>

      <varlistentry id="mapscrn">
        <term><command>mapscrn</command></term>
        <listitem>
          <para>An obsolete program that used to load a user-defined output
          character mapping table into the console driver; this is now done
          by <command>setfont</command></para>
          <indexterm zone="ch-system-kbd mapscrn">
            <primary sortas="b-mapscrn">mapscrn</primary>
          </indexterm>
        </listitem>
      </varlistentry>

      <varlistentry id="openvt">
        <term><command>openvt</command></term>
        <listitem>
          <para>Starts a program on a new virtual terminal (VT)</para>
          <indexterm zone="ch-system-kbd openvt">
            <primary sortas="b-openvt">openvt</primary>
          </indexterm>
        </listitem>
      </varlistentry>

      <varlistentry id="psfaddtable">
        <term><command>psfaddtable</command></term>
        <listitem>
          <para>A link to <command>psfxtable</command></para>
          <indexterm zone="ch-system-kbd psfaddtable">
            <primary sortas="b-psfaddtable">psfaddtable</primary>
          </indexterm>
        </listitem>
      </varlistentry>

      <varlistentry id="psfgettable">
        <term><command>psfgettable</command></term>
        <listitem>
          <para>A link to <command>psfxtable</command></para>
          <indexterm zone="ch-system-kbd psfgettable">
            <primary sortas="b-psfgettable">psfgettable</primary>
          </indexterm>
        </listitem>
      </varlistentry>

      <varlistentry id="psfstriptable">
        <term><command>psfstriptable</command></term>
        <listitem>
          <para>A link to <command>psfxtable</command></para>
          <indexterm zone="ch-system-kbd psfstriptable">
            <primary sortas="b-psfstriptable">psfstriptable</primary>
          </indexterm>
        </listitem>
      </varlistentry>

      <varlistentry id="psfxtable">
        <term><command>psfxtable</command></term>
        <listitem>
          <para>Handle Unicode character tables for console fonts</para>
          <indexterm zone="ch-system-kbd psfxtable">
            <primary sortas="b-psfxtable">psfxtable</primary>
          </indexterm>
        </listitem>
      </varlistentry>

      <varlistentry id="resizecons">
        <term><command>resizecons</command></term>
        <listitem>
          <para>Changes the kernel idea of the console size</para>
          <indexterm zone="ch-system-kbd resizecons">
            <primary sortas="b-resizecons">resizecons</primary>
          </indexterm>
        </listitem>
      </varlistentry>

      <varlistentry id="setfont">
        <term><command>setfont</command></term>
        <listitem>
          <para>Changes the Enhanced Graphic Adapter (EGA) and Video Graphics
          Array (VGA) fonts on the console</para>
          <indexterm zone="ch-system-kbd setfont">
            <primary sortas="b-setfont">setfont</primary>
          </indexterm>
        </listitem>
      </varlistentry>

      <varlistentry id="setkeycodes">
        <term><command>setkeycodes</command></term>
        <listitem>
          <para>Loads kernel scancode-to-keycode mapping table entries; this is
          useful if there are unusual keys on the keyboard</para>
          <indexterm zone="ch-system-kbd setkeycodes">
            <primary sortas="b-setkeycodes">setkeycodes</primary>
          </indexterm>
        </listitem>
      </varlistentry>

      <varlistentry id="setleds">
        <term><command>setleds</command></term>
        <listitem>
          <para>Sets the keyboard flags and Light Emitting Diodes (LEDs)</para>
          <indexterm zone="ch-system-kbd setleds">
            <primary sortas="b-setleds">setleds</primary>
          </indexterm>
        </listitem>
      </varlistentry>

      <varlistentry id="setmetamode">
        <term><command>setmetamode</command></term>
        <listitem>
          <para>Defines the keyboard meta-key handling</para>
          <indexterm zone="ch-system-kbd setmetamode">
            <primary sortas="b-setmetamode">setmetamode</primary>
          </indexterm>
        </listitem>
      </varlistentry>

      <varlistentry id="showconsolefont">
        <term><command>showconsolefont</command></term>
        <listitem>
          <para>Shows the current EGA/VGA console screen font</para>
          <indexterm zone="ch-system-kbd showconsolefont">
            <primary sortas="b-showconsolefont">showconsolefont</primary>
          </indexterm>
        </listitem>
      </varlistentry>

      <varlistentry id="showkey">
        <term><command>showkey</command></term>
        <listitem>
          <para>Reports the scancodes, keycodes, and ASCII codes of the keys
          pressed on the keyboard</para>
          <indexterm zone="ch-system-kbd showkey">
            <primary sortas="b-showkey">showkey</primary>
          </indexterm>
        </listitem>
      </varlistentry>

      <varlistentry id="unicode_start">
        <term><command>unicode_start</command></term>
        <listitem>
          <para>Puts the keyboard and console in UNICODE mode. Never use it on
          CLFS, because applications are not configured to support UNICODE.</para>
          <indexterm zone="ch-system-kbd unicode_start">
            <primary sortas="b-unicode_start">unicode_start</primary>
          </indexterm>
        </listitem>
      </varlistentry>

      <varlistentry id="unicode_stop">
        <term><command>unicode_stop</command></term>
        <listitem>
          <para>Reverts keyboard and console from UNICODE mode</para>
          <indexterm zone="ch-system-kbd unicode_stop">
            <primary sortas="b-unicode_stop">unicode_stop</primary>
          </indexterm>
        </listitem>
      </varlistentry>

    </variablelist>

  </sect2>

</sect1>