%general-entities; ]> setclock configuring The setclock script reads the time from the hardware clock, also known as the BIOS or the Complementary Metal Oxide Semiconductor (CMOS) clock. If the hardware clock is set to UTC, this script will convert the hardware clock's time to the local time using the /etc/localtime file (which tells the hwclock program which timezone the user is in). There is no way to detect whether or not the hardware clock is set to UTC, so this needs to be configured manually. If you cannot remember whether or not the hardware clock is set to UTC, find out by running the hwclock --localtime --show command. This will display what the current time is according to the hardware clock. If this time matches whatever your watch says, then the hardware clock is set to local time. If the output from hwclock is not local time, chances are it is set to UTC time. Verify this by adding or subtracting the proper amount of hours for the timezone to the time shown by hwclock. For example, if you are currently in the MST timezone, which is also known as GMT -0700, add seven hours to the local time. Change the value of the UTC variable below to a value of 0 (zero) if the hardware clock is not set to UTC time. Create a new file /etc/sysconfig/clock by running the following: cat > ${LFS}/etc/sysconfig/clock << "EOF" # Begin /etc/sysconfig/clock UTC=1 # End /etc/sysconfig/clock EOF A good hint explaining how to deal with time on LFS is available at . It explains issues such as time zones, UTC, and the TZ environment variable.