Context Navigation

source: bootscripts/lfs/init.d/functions@ 59bc7cb

Visit:

clfs-1.2 clfs-2.1 clfs-3.0.0-systemd clfs-3.0.0-sysvinit systemd sysvinit

Last change on this file since 59bc7cb was 6c32364, checked in by Jim Gifford <clfs@…>, 18 years ago
r4177@server: jim \| 2006-06-29 16:00:12 -0700 Disable interactive Prompts. Added ccheck for /etc/sysconfig/createfiles.
Property mode set to `100644`
File size: 15.9 KB

Line
1	#!/bin/sh
2	########################################################################
3	# Begin $rc_base/init.d/functions
4	#
5	# Description : Run Level Control Functions
6	#
7	# Authors : Gerard Beekmans - gerard@linuxfromscratch.org
8	#
9	# Version : 00.00
10	#
11	# Notes : With code based on Matthias Benkmann's simpleinit-msb
12	# http://winterdrache.de/linux/newboot/index.html
13	#
14	########################################################################
15
16	if [ -e /etc/sysconfig/lcd ]; then
17	if [ -e /dev/lcd ]; then
18	source /etc/sysconfig/lcd
19	fi
20	fi
21
22	if [ -e /etc/sysconfig/bootscripts ]; then
23	source /etc/sysconfig/bootscripts
24	fi
25
26	## Environmental setup
27	# Setup default values for environment
28	umask 022
29	export PATH="/bin:/usr/bin:/sbin:/usr/sbin"
30
31	# Signal sent to running processes to refresh their configuration
32	RELOADSIG="HUP"
33
34	# Number of seconds between STOPSIG and FALLBACK when stopping processes
35	KILLDELAY="3"
36
37	## Screen Dimensions
38	# Find current screen size
39	if [ -z "${COLUMNS}" ]; then
40	COLUMNS=$(stty size)
41	COLUMNS=${COLUMNS##* }
42	fi
43
44	# When using remote connections, such as a serial port, stty size returns 0
45	if [ "${COLUMNS}" = "0" ]; then
46	COLUMNS=80
47	fi
48
49	## Measurements for positioning result messages
50	COL=$((${COLUMNS} - 8))
51	WCOL=$((${COL} - 2))
52
53	## Set Cursor Position Commands, used via echo -e
54	SET_COL="\\033[${COL}G" # at the $COL char
55	SET_WCOL="\\033[${WCOL}G" # at the $WCOL char
56	CURS_UP="\\033[1A\\033[0G" # Up one line, at the 0'th char
57
58	## Set color commands, used via echo -e
59	# Please consult `man console_codes for more information
60	# under the "ECMA-48 Set Graphics Rendition" section
61	#
62	# Warning: when switching from a 8bit to a 9bit font,
63	# the linux console will reinterpret the bold (1;) to
64	# the top 256 glyphs of the 9bit font. This does
65	# not affect framebuffer consoles
66	NORMAL="\\033[0;39m" # Standard console grey
67	SUCCESS="\\033[1;32m" # Success is green
68	WARNING="\\033[1;33m" # Warnings are yellow
69	FAILURE="\\033[1;31m" # Failures are red
70	INFO="\\033[1;36m" # Information is light cyan
71	BRACKET="\\033[1;34m" # Brackets are blue
72
73	STRING_LENGTH="0" # the length of the current message
74
75	#*******************************************************************************
76	# Function - boot_mesg()
77	#
78	# Purpose: Sending information from bootup scripts to the console
79	#
80	# Inputs: $1 is the message
81	# $2 is the colorcode for the console
82	#
83	# Outputs: Standard Output
84	#
85	# Dependencies: - sed for parsing strings.
86	# - grep for counting string length.
87	#
88	# Todo:
89	#*******************************************************************************
90	boot_mesg()
91	{
92	local ECHOPARM=""
93
94	if [ "$LCD_PROG" ]; then
95	LCD_OUT1="${1:0:$LCD_CHAR}"
96	$LCD_PROG "$LCD_OUT1" > /dev/null 2>&1
97	fi
98
99	while true
100	do
101	case "${1}" in
102	-n)
103	ECHOPARM=" -n "
104	shift 1
105	;;
106	-*)
107	echo "Unknown Option: ${1}"
108	return 1
109	;;
110	*)
111	break
112	;;
113	esac
114	done
115
116	## Figure out the length of what is to be printed to be used
117	## for warning messges.
118	STRING_LENGTH="`echo "${1}" \| sed \
119	-e 's,.,.,g' -e 'l 1' \| grep -c \$`"
120
121	# Print the message to the screen
122	echo ${ECHOPARM} -e "${2}${1}"
123
124	}
125
126	boot_mesg_flush()
127	{
128	# Reset STRING_LENGTH for next message
129	STRING_LENGTH="0"
130	}
131
132	boot_log()
133	{
134	# Left in for backwards compatibility
135	echo -n ""
136	}
137
138	echo_ok()
139	{
140	echo -n -e "${CURS_UP}${SET_COL}${BRACKET}[${SUCCESS} OK ${BRACKET}]"
141	echo -e "${NORMAL}"
142	boot_mesg_flush "[ OK ]"
143	if [ "$LCD_PROG" ]; then
144	if [ "$LCD_LINES" = "2" ]; then
145	LCD_OUT2="[ OK ]"
146	$LCD_PROG "$LCD_OUT1" "$LCD_OUT2" > /dev/null 2>&1
147	else
148	LCD_OUT2="${LCD_OUT1:0:12} OK"
149	$LCD_PROG "$LCD_OUT2" > /dev/null 2>&1
150	fi
151	fi
152	}
153
154	echo_failure()
155	{
156	echo -n -e "${CURS_UP}${SET_COL}${BRACKET}[${FAILURE} FAIL ${BRACKET}]"
157	echo -e "${NORMAL}"
158	boot_mesg_flush "[ FAIL ]"
159	if [ "$LCD_PROG" ]; then
160	if [ "$LCD_LINES" = "2" ]; then
161	LCD_OUT2="[ FAIL ]"
162	$LCD_PROG "$LCD_OUT1" "$LCD_OUT2" > /dev/null 2>&1
163	else
164	LCD_OUT2="${LCD_OUT1:0:10} FAIL"
165	$LCD_PROG "$LCD_OUT2" > /dev/null 2>&1
166	fi
167	fi
168	}
169
170	echo_warning()
171	{
172	echo -n -e "${CURS_UP}${SET_COL}${BRACKET}[${WARNING} WARN ${BRACKET}]"
173	echo -e "${NORMAL}"
174	if [ "$LCD_PROG" ]; then
175	if [ "$LCD_LINES" = "2" ]; then
176	LCD_OUT2="[ WARN ]"
177	$LCD_PROG "$LCD_OUT1" "$LCD_OUT2" > /dev/null 2>&1
178	else
179	LCD_OUT2="${LCD_OUT1:0:10} WARN"
180	$LCD_PROG "$LCD_OUT2" > /dev/null 2>&1
181	fi
182	fi
183	boot_mesg_flush "[ WARN ]"
184	}
185
186	print_error_msg()
187	{
188	echo_failure
189	# $i is inherited by the rc script
190	boot_log "\n\n${i} failed and exited with a return value of ${error_value}."
191	boot_mesg_flush
192	boot_mesg -n "FAILURE:\n\nYou should not be reading this error message.\n\n" ${FAILURE}
193	boot_mesg -n " It means that an unforeseen error took"
194	boot_mesg -n " place in ${i}, which exited with a return value of"
195	boot_mesg " ${error_value}.\n"
196	boot_mesg_flush
197	boot_mesg -n "If you're able to track this"
198	boot_mesg -n " error down to a bug in one of the files provided by"
199	boot_mesg -n " the LFS book, please be so kind to inform us at"
200	boot_mesg " lfs-dev@linuxfromscratch.org.\n"
201	boot_mesg_flush
202	if [ "$INTERACTIVE" ]; then
203	boot_mesg -n "Press Enter to continue..." ${INFO}
204	boot_mesg "" ${NORMAL}
205	if [ "$LCD_PROG" ]; then
206	sleep 10
207	else
208	read ENTER
209	fi
210	fi
211	}
212
213	check_script_status()
214	{
215	# $i is inherited by the rc script
216	if [ ! -f ${i} ]; then
217	boot_mesg "${i} is not a valid symlink." ${WARNING}
218	echo_warning
219	continue
220	fi
221
222	if [ ! -x ${i} ]; then
223	boot_mesg "${i} is not executable, skipping." ${WARNING}
224	echo_warning
225	continue
226	fi
227	}
228
229	evaluate_retval()
230	{
231	error_value="${?}"
232
233	if [ ${error_value} = 0 ]; then
234	echo_ok
235	else
236	echo_failure
237	fi
238
239	# This prevents the 'An Unexpected Error Has Occurred' from trivial
240	# errors.
241	return 0
242	}
243
244	print_status()
245	{
246	if [ "${#}" = "0" ]; then
247	echo "Usage: ${0} {success\|warning\|failure}"
248	return 1
249	fi
250
251	# boot_mesg_flush
252	# echo_warning
253
254	case "${1}" in
255
256	success)
257	echo_ok
258	;;
259
260	warning)
261	# Leave this extra case in because old scripts
262	# may call it this way.
263	case "${2}" in
264	running)
265	echo -e -n "${CURS_UP}"
266	echo -e -n "\\033[${STRING_LENGTH}G "
267	boot_mesg "Already running." ${WARNING}
268	echo_warning
269	;;
270	not_running)
271	echo -e -n "${CURS_UP}"
272	echo -e -n "\\033[${STRING_LENGTH}G "
273	boot_mesg "Not running." ${WARNING}
274	echo_warning
275	;;
276	not_available)
277	echo -e -n "${CURS_UP}"
278	echo -e -n "\\033[${STRING_LENGTH}G "
279	boot_mesg "Not available." ${WARNING}
280	echo_warning
281	;;
282	*)
283	# This is how it is supposed to
284	# be called
285	echo_warning
286	;;
287	esac
288	;;
289
290	failure)
291	echo_failure
292	;;
293
294	esac
295
296	}
297
298	reloadproc()
299	{
300	if [ "${#}" = "0" ]; then
301	echo "Usage: reloadproc [{program}]"
302	exit 1
303	fi
304
305	getpids "${1}"
306
307	if [ -n "${pidlist}" ]; then
308	failure="0"
309	for pid in ${pidlist}
310	do
311	kill -"${RELOADSIG}" "${pid}" \|\| failure="1"
312	done
313
314	(exit ${failure})
315	evaluate_retval
316
317	else
318	boot_mesg "Process ${1} not running." ${WARNING}
319	echo_warning
320	fi
321	}
322
323	statusproc()
324	{
325	if [ "${#}" = "0" ]
326	then
327	echo "Usage: statusproc {program}"
328	exit 1
329	fi
330
331	getpids "${1}"
332
333	if [ -n "${pidlist}" ]; then
334	echo -e "${INFO}${base} is running with Process"\
335	"ID(s) ${pidlist}.${NORMAL}"
336	else
337	if [ -n "${base}" -a -e "/var/run/${base}.pid" ]; then
338	echo -e "${WARNING}${1} is not running but"\
339	"/var/run/${base}.pid exists.${NORMAL}"
340	else
341	if [ -n "${PIDFILE}" -a -e "${PIDFILE}" ]; then
342	echo -e "${WARNING}${1} is not running"\
343	"but ${PIDFILE} exists.${NORMAL}"
344	else
345	echo -e "${INFO}${1} is not running.${NORMAL}"
346	fi
347	fi
348	fi
349	}
350
351	# The below functions are documented in the LSB-generic 2.1.0
352
353	#*******************************************************************************
354	# Function - pidofproc [-s] [-p pidfile] pathname
355	#
356	# Purpose: This function returns one or more pid(s) for a particular daemon
357	#
358	# Inputs: -p pidfile, use the specified pidfile instead of pidof
359	# pathname, path to the specified program
360	#
361	# Outputs: return 0 - Success, pid's in stdout
362	# return 1 - Program is dead, pidfile exists
363	# return 2 - Invalid or excessive number of arguments,
364	# warning in stdout
365	# return 3 - Program is not running
366	#
367	# Dependencies: pidof, echo, head
368	#
369	# Todo: Remove dependency on head
370	# This depreciates getpids
371	# Test changes to pidof
372	#
373	#*******************************************************************************
374	pidofproc()
375	{
376	local pidfile=""
377	local lpids=""
378	local silent=""
379	pidlist=""
380	while true
381	do
382	case "${1}" in
383	-p)
384	pidfile="${2}"
385	shift 2
386	;;
387
388	-s)
389	# Added for legacy opperation of getpids
390	# eliminates several '> /dev/null'
391	silent="1"
392	shift 1
393	;;
394	-*)
395	log_failure_msg "Unknown Option: ${1}"
396	return 2
397	;;
398	*)
399	break
400	;;
401	esac
402	done
403
404	if [ "${#}" != "1" ]; then
405	shift 1
406	log_failure_msg "Usage: pidofproc [-s] [-p pidfile] pathname"
407	return 2
408	fi
409
410	if [ -n "${pidfile}" ]; then
411	if [ ! -r "${pidfile}" ]; then
412	return 3 # Program is not running
413	fi
414
415	lpids=`head -n 1 ${pidfile}`
416	for pid in ${lpids}
417	do
418	if [ "${pid}" -ne "$$" -a "${pid}" -ne "${PPID}" ]; then
419	kill -0 "${pid}" > /dev/null &&
420	pidlist="${pidlist} ${pid}"
421	fi
422
423	if [ "${silent}" -ne "1" ]; then
424	echo "${pidlist}"
425	fi
426
427	test -z "${pidlist}" &&
428	# Program is dead, pidfile exists
429	return 1
430	# else
431	return 0
432	done
433
434	else
435	pidlist=`pidof -o $$ -o $PPID -x "$1"`
436	if [ "x${silent}" != "x1" ]; then
437	echo "${pidlist}"
438	fi
439
440	# Get provide correct running status
441	if [ -n "${pidlist}" ]; then
442	return 0
443	else
444	return 3
445	fi
446
447	fi
448
449	if [ "$?" != "0" ]; then
450	return 3 # Program is not running
451	fi
452	}
453
454	# This will ensure compatibility with previous LFS Bootscripts
455	getpids()
456	{
457	if [ -z "${PIDFILE}" ]; then
458	pidofproc -s -p "${PIDFILE}" $@
459	else
460	pidofproc -s $@
461	fi
462	base="${1##*/}"
463	}
464
465	#*******************************************************************************
466	# Function - loadproc [-f] [-n nicelevel] [-p pidfile] pathname [args]
467	#
468	# Purpose: This runs the specified program as a daemon
469	#
470	# Inputs: -f, run the program even if it is already running
471	# -n nicelevel, specifies a nice level. See nice(1).
472	# -p pidfile, uses the specified pidfile
473	# pathname, pathname to the specified program
474	# args, arguments to pass to specified program
475	#
476	# Outputs: return 0 - Success
477	# return 2 - Invalid of excessive number of arguments,
478	# warning in stdout
479	# return 4 - Program or service status is unknown
480	#
481	# Dependencies: nice
482	#
483	# Todo: LSB says this should be called start_daemon
484	# LSB does not say that it should call evaluate_retval
485	# It checks for PIDFILE, which is deprecated.
486	# Will be removed after BLFS 6.0
487	# loadproc returns 0 if program is already running, not LSB compliant
488	#
489	#*******************************************************************************
490	loadproc()
491	{
492	local pidfile=""
493	local forcestart=""
494	local nicelevel="10"
495
496	# This will ensure compatibility with previous LFS Bootscripts
497	if [ -n "${PIDFILE}" ]; then
498	pidfile="${PIDFILE}"
499	fi
500
501	while true
502	do
503	case "${1}" in
504	-f)
505	forcestart="1"
506	shift 1
507	;;
508	-n)
509	nicelevel="${2}"
510	shift 2
511	;;
512	-p)
513	pidfile="${2}"
514	shift 2
515	;;
516	-*)
517	log_failure_msg "Unknown Option: ${1}"
518	return 2 #invalid or excess argument(s)
519	;;
520	*)
521	break
522	;;
523	esac
524	done
525
526	if [ "${#}" = "0" ]; then
527	log_failure_msg "Usage: loadproc [-f] [-n nicelevel] [-p pidfile] pathname [args]"
528	return 2 #invalid or excess argument(s)
529	fi
530
531	if [ -z "${forcestart}" ]; then
532	if [ -z "${pidfile}" ]; then
533	pidofproc -s "${1}"
534	else
535	pidofproc -s -p "${pidfile}" "${1}"
536	fi
537
538	case "${?}" in
539	0)
540	log_warning_msg "Unable to continue: ${1} is running"
541	return 0 # 4
542	;;
543	1)
544	log_warning_msg "Unable to continue: ${pidfile} exists"
545	return 0 # 4
546	;;
547	3)
548	;;
549	*)
550	log_failure_msg "Unknown error code from pidofproc: ${?}"
551	return 4
552	;;
553	esac
554	fi
555
556	nice -n "${nicelevel}" "${@}"
557	evaluate_retval # This is "Probably" not LSB compliant, but required to be compatible with older bootscripts
558	return 0
559	}
560
561	#*******************************************************************************
562	# Function - killproc [-p pidfile] pathname [signal]
563	#
564	# Purpose:
565	#
566	# Inputs: -p pidfile, uses the specified pidfile
567	# pathname, pathname to the specified program
568	# signal, send this signal to pathname
569	#
570	# Outputs: return 0 - Success
571	# return 2 - Invalid of excessive number of arguments,
572	# warning in stdout
573	# return 4 - Unknown Status
574	#
575	# Dependencies: kill
576	#
577	# Todo: LSB does not say that it should call evaluate_retval
578	# It checks for PIDFILE, which is deprecated.
579	# Will be removed after BLFS 6.0
580	#
581	#*******************************************************************************
582	killproc()
583	{
584	local pidfile=""
585	local killsig=""
586	pidlist=""
587
588	# This will ensure compatibility with previous LFS Bootscripts
589	if [ -n "${PIDFILE}" ]; then
590	pidfile="${PIDFILE}"
591	fi
592
593	while true
594	do
595	case "${1}" in
596	-p)
597	pidfile="${2}"
598	shift 2
599	;;
600	-*)
601	log_failure_msg "Unknown Option: ${1}"
602	return 2
603	;;
604	*)
605	break
606	;;
607	esac
608	done
609
610	if [ "${#}" = "2" ]; then
611	killsig="${2}"
612	elif [ "${#}" != "1" ]; then
613	shift 2
614	log_failure_msg "Usage: killproc [-p pidfile] pathname [signal]"
615	return 2
616	fi
617
618	if [ -z "${pidfile}" ]; then
619	pidofproc -s "${1}"
620	else
621	pidofproc -s -p "${pidfile}" "${1}"
622	fi
623
624	# Change....
625	if [ -n "${pidlist}" ]; then
626	for pid in ${pidlist}
627	do
628	kill -${killsig:-TERM} ${pid} 2>/dev/null
629	if [ -z "${killsig}" ]; then
630	# Wait up to 3 seconds, for ${pid} to terminate
631	local dtime=${KILLDELAY}
632	while [ "${dtime}" != "0" ]
633	do
634	kill -0 ${pid} 2>/dev/null \|\| break
635	sleep 1
636	dtime=$(( ${dtime} - 1))
637	done
638	# If ${pid} is still running, kill it
639	kill -0 ${pid} 2>/dev/null && kill -KILL ${pid} 2>/dev/null
640	fi
641	done
642
643	if [ -z "${killsig}" ]; then
644	pidofproc -s "${1}"
645
646	# Program was terminated
647	if [ "$?" != "0" ]; then
648	# Pidfile Exists
649	if [ -f "${pidfile}" ]; then
650	rm -f "${pidfile}"
651	fi
652	echo_ok
653	return 0
654	else # Program is still running
655	echo_failure
656	return 4 # Unknown Status
657	fi
658	else
659	if [ -z "${pidfile}" ]; then
660	pidofproc -s "${1}"
661	else
662	pidofproc -s -p "${pidfile}" "${1}"
663	fi
664	fi
665
666	evaluate_retval # This is "Probably" not LSB compliant, but required to be compatible with older bootscripts
667
668	else
669	print_status warning not_running
670	fi
671	}
672
673
674	#*******************************************************************************
675	# Function - log_success_msg "message"
676	#
677	# Purpose: Print a success message
678	#
679	# Inputs: $@ - Message
680	#
681	# Outputs: Text output to screen
682	#
683	# Dependencies: echo
684	#
685	# Todo: logging
686	#
687	#*******************************************************************************
688	log_success_msg()
689	{
690	echo -n -e "${BOOTMESG_PREFIX}${@}"
691	echo -e "${SET_COL}""${BRACKET}""[""${SUCCESS}"" OK ""${BRACKET}""]""${NORMAL}"
692	return 0
693	}
694
695	#*******************************************************************************
696	# Function - log_failure_msg "message"
697	#
698	# Purpose: Print a failure message
699	#
700	# Inputs: $@ - Message
701	#
702	# Outputs: Text output to screen
703	#
704	# Dependencies: echo
705	#
706	# Todo: logging
707	#
708	#*******************************************************************************
709	log_failure_msg() {
710	echo -n -e "${BOOTMESG_PREFIX}${@}"
711	echo -e "${SET_COL}""${BRACKET}""[""${FAILURE}"" FAIL ""${BRACKET}""]""${NORMAL}"
712	return 0
713	}
714
715	#*******************************************************************************
716	# Function - log_warning_msg "message"
717	#
718	# Purpose: print a warning message
719	#
720	# Inputs: $@ - Message
721	#
722	# Outputs: Text output to screen
723	#
724	# Dependencies: echo
725	#
726	# Todo: logging
727	#
728	#*******************************************************************************
729	log_warning_msg() {
730	echo -n -e "${BOOTMESG_PREFIX}${@}"
731	echo -e "${SET_COL}""${BRACKET}""[""${WARNING}"" WARN ""${BRACKET}""]""${NORMAL}"
732	return 0
733	}
734
735	# End $rc_base/init.d/functions

Note: See TracBrowser for help on using the repository browser.

Download in other formats: