Context Navigation

source: bootscripts/lfs/init.d/functions@ c06e893

Visit:

clfs-1.2 clfs-2.1 clfs-3.0.0-systemd clfs-3.0.0-sysvinit systemd sysvinit

Last change on this file since c06e893 was 600339f5, checked in by Jim Gifford <clfs@…>, 19 years ago
LCD Fixes
Property mode set to `100644`
File size: 15.3 KB

Rev	Line
[163a6701]	1	#!/bin/sh
	2	########################################################################
	3	# Begin $rc_base/init.d/functions
	4	#
	5	# Description : Run Level Control Functions
	6	#
	7	# Authors : Gerard Beekmans - gerard@linuxfromscratch.org
	8	#
	9	# Version : 00.00
	10	#
	11	# Notes : With code based on Matthias Benkmann's simpleinit-msb
	12	# http://winterdrache.de/linux/newboot/index.html
	13	#
	14	########################################################################
	15
[c6e88663]	16	if [ -e /etc/sysconfig/lcd ]; then
	17	source /etc/sysconfig/lcd
	18	fi
	19
[163a6701]	20	## Environmental setup
	21	# Setup default values for environment
	22	umask 022
	23	export PATH="/bin:/usr/bin:/sbin:/usr/sbin"
	24
	25	# Signal sent to running processes to refresh their configuration
	26	RELOADSIG="HUP"
	27
	28	# Number of seconds between STOPSIG and FALLBACK when stopping processes
	29	KILLDELAY="3"
	30
	31	## Screen Dimensions
	32	# Find current screen size
	33	if [ -z "${COLUMNS}" ]; then
	34	COLUMNS=$(stty size)
	35	COLUMNS=${COLUMNS##* }
	36	fi
	37
	38	# When using remote connections, such as a serial port, stty size returns 0
	39	if [ "${COLUMNS}" = "0" ]; then
	40	COLUMNS=80
	41	fi
	42
	43	## Measurements for positioning result messages
	44	COL=$((${COLUMNS} - 8))
	45	WCOL=$((${COL} - 2))
	46
	47	## Set Cursor Position Commands, used via echo -e
	48	SET_COL="\\033[${COL}G" # at the $COL char
	49	SET_WCOL="\\033[${WCOL}G" # at the $WCOL char
	50	CURS_UP="\\033[1A\\033[0G" # Up one line, at the 0'th char
	51
	52	## Set color commands, used via echo -e
	53	# Please consult `man console_codes for more information
	54	# under the "ECMA-48 Set Graphics Rendition" section
	55	#
	56	# Warning: when switching from a 8bit to a 9bit font,
	57	# the linux console will reinterpret the bold (1;) to
	58	# the top 256 glyphs of the 9bit font. This does
	59	# not affect framebuffer consoles
	60	NORMAL="\\033[0;39m" # Standard console grey
	61	SUCCESS="\\033[1;32m" # Success is green
	62	WARNING="\\033[1;33m" # Warnings are yellow
	63	FAILURE="\\033[1;31m" # Failures are red
	64	INFO="\\033[1;36m" # Information is light cyan
	65	BRACKET="\\033[1;34m" # Brackets are blue
	66
	67	STRING_LENGTH="0" # the length of the current message
	68
	69	#*******************************************************************************
	70	# Function - boot_mesg()
	71	#
	72	# Purpose: Sending information from bootup scripts to the console
	73	#
	74	# Inputs: $1 is the message
	75	# $2 is the colorcode for the console
	76	#
	77	# Outputs: Standard Output
	78	#
	79	# Dependencies: - sed for parsing strings.
	80	# - grep for counting string length.
	81	#
	82	# Todo:
	83	#*******************************************************************************
	84	boot_mesg()
	85	{
	86	local ECHOPARM=""
	87
[c6e88663]	88	if [ "$LCD_PROG" ]; then
	89	LCD_OUT1="${1:0:$LCD_CHAR}"
	90	$LCD_PROG "$LCD_OUT1"
	91	fi
	92
[163a6701]	93	while true
	94	do
	95	case "${1}" in
	96	-n)
	97	ECHOPARM=" -n "
	98	shift 1
	99	;;
	100	-*)
	101	echo "Unknown Option: ${1}"
	102	return 1
	103	;;
	104	*)
	105	break
	106	;;
	107	esac
	108	done
	109
	110	## Figure out the length of what is to be printed to be used
	111	## for warning messges.
	112	STRING_LENGTH="`echo "${1}" \| sed \
	113	-e 's,.,.,g' -e 'l 1' \| grep -c \$`"
	114
	115	# Print the message to the screen
	116	echo ${ECHOPARM} -e "${2}${1}"
	117
	118	}
	119
	120	boot_mesg_flush()
	121	{
	122	# Reset STRING_LENGTH for next message
	123	STRING_LENGTH="0"
	124	}
	125
	126	boot_log()
	127	{
	128	# Left in for backwards compatibility
	129	echo -n ""
	130	}
	131
	132	echo_ok()
	133	{
	134	echo -n -e "${CURS_UP}${SET_COL}${BRACKET}[${SUCCESS} OK ${BRACKET}]"
	135	echo -e "${NORMAL}"
	136	boot_mesg_flush "[ OK ]"
[c6e88663]	137	if [ "$LCD_PROG" ]; then
	138	LCD_OUT2="[ OK ]"
[600339f5]	139	$LCD_PROG "$LCD_OUT1" "$LCD_OUT2"
[c6e88663]	140	fi
[163a6701]	141	}
	142
	143	echo_failure()
	144	{
	145	echo -n -e "${CURS_UP}${SET_COL}${BRACKET}[${FAILURE} FAIL ${BRACKET}]"
	146	echo -e "${NORMAL}"
	147	boot_mesg_flush "[ FAIL ]"
[c6e88663]	148	if [ "$LCD_PROG" ]; then
	149	LCD_OUT2="[ FAIL ]"
[600339f5]	150	$LCD_PROG "$LCD_OUT1" "$LCD_OUT2"
[c6e88663]	151	fi
[163a6701]	152	}
	153
	154	echo_warning()
	155	{
	156	echo -n -e "${CURS_UP}${SET_COL}${BRACKET}[${WARNING} WARN ${BRACKET}]"
	157	echo -e "${NORMAL}"
[c6e88663]	158	if [ "$LCD_PROG" ]; then
	159	LCD_OUT2="[ WARN ]"
[600339f5]	160	$LCD_PROG "$LCD_OUT1" "$LCD_OUT2"
[c6e88663]	161	fi
[163a6701]	162	boot_mesg_flush "[ WARN ]"
	163	}
	164
	165	print_error_msg()
	166	{
	167	echo_failure
	168	# $i is inherited by the rc script
	169	boot_log "\n\n${i} failed and exited with a return value of ${error_value}."
	170	boot_mesg_flush
	171	boot_mesg -n "FAILURE:\n\nYou should not be reading this error message.\n\n" ${FAILURE}
	172	boot_mesg -n " It means that an unforeseen error took"
	173	boot_mesg -n " place in ${i}, which exited with a return value of"
	174	boot_mesg " ${error_value}.\n"
	175	boot_mesg_flush
	176	boot_mesg -n "If you're able to track this"
	177	boot_mesg -n " error down to a bug in one of the files provided by"
	178	boot_mesg -n " the LFS book, please be so kind to inform us at"
	179	boot_mesg " lfs-dev@linuxfromscratch.org.\n"
	180	boot_mesg_flush
	181	boot_mesg -n "Press Enter to continue..." ${INFO}
	182	boot_mesg "" ${NORMAL}
[c6e88663]	183	if [ "$LCD_PROG" ]; then
	184	sleep 10
	185	else
	186	read ENTER
	187	fi
[163a6701]	188	}
	189
	190	check_script_status()
	191	{
	192	# $i is inherited by the rc script
	193	if [ ! -f ${i} ]; then
	194	boot_mesg "${i} is not a valid symlink." ${WARNING}
	195	echo_warning
	196	continue
	197	fi
	198
	199	if [ ! -x ${i} ]; then
	200	boot_mesg "${i} is not executable, skipping." ${WARNING}
	201	echo_warning
	202	continue
	203	fi
	204	}
	205
	206	evaluate_retval()
	207	{
	208	error_value="${?}"
	209
	210	if [ ${error_value} = 0 ]; then
	211	echo_ok
	212	else
	213	echo_failure
	214	fi
	215
	216	# This prevents the 'An Unexpected Error Has Occurred' from trivial
	217	# errors.
	218	return 0
	219	}
	220
	221	print_status()
	222	{
	223	if [ "${#}" = "0" ]; then
	224	echo "Usage: ${0} {success\|warning\|failure}"
	225	return 1
	226	fi
	227
	228	# boot_mesg_flush
	229	# echo_warning
	230
	231	case "${1}" in
	232
	233	success)
	234	echo_ok
	235	;;
	236
	237	warning)
	238	# Leave this extra case in because old scripts
	239	# may call it this way.
	240	case "${2}" in
	241	running)
	242	echo -e -n "${CURS_UP}"
	243	echo -e -n "\\033[${STRING_LENGTH}G "
	244	boot_mesg "Already running." ${WARNING}
	245	echo_warning
	246	;;
	247	not_running)
	248	echo -e -n "${CURS_UP}"
	249	echo -e -n "\\033[${STRING_LENGTH}G "
	250	boot_mesg "Not running." ${WARNING}
	251	echo_warning
	252	;;
	253	not_available)
	254	echo -e -n "${CURS_UP}"
	255	echo -e -n "\\033[${STRING_LENGTH}G "
	256	boot_mesg "Not available." ${WARNING}
	257	echo_warning
	258	;;
	259	*)
	260	# This is how it is supposed to
	261	# be called
	262	echo_warning
	263	;;
	264	esac
	265	;;
	266
	267	failure)
	268	echo_failure
	269	;;
	270
	271	esac
	272
	273	}
	274
	275	reloadproc()
	276	{
	277	if [ "${#}" = "0" ]; then
	278	echo "Usage: reloadproc [{program}]"
	279	exit 1
	280	fi
	281
	282	getpids "${1}"
	283
	284	if [ -n "${pidlist}" ]; then
	285	failure="0"
	286	for pid in ${pidlist}
	287	do
	288	kill -"${RELOADSIG}" "${pid}" \|\| failure="1"
	289	done
	290
	291	(exit ${failure})
	292	evaluate_retval
	293
	294	else
	295	boot_mesg "Process ${1} not running." ${WARNING}
	296	echo_warning
	297	fi
	298	}
	299
	300	statusproc()
	301	{
	302	if [ "${#}" = "0" ]
	303	then
	304	echo "Usage: statusproc {program}"
	305	exit 1
	306	fi
	307
	308	getpids "${1}"
	309
	310	if [ -n "${pidlist}" ]; then
	311	echo -e "${INFO}${base} is running with Process"\
	312	"ID(s) ${pidlist}.${NORMAL}"
	313	else
	314	if [ -n "${base}" -a -e "/var/run/${base}.pid" ]; then
	315	echo -e "${WARNING}${1} is not running but"\
	316	"/var/run/${base}.pid exists.${NORMAL}"
	317	else
	318	if [ -n "${PIDFILE}" -a -e "${PIDFILE}" ]; then
	319	echo -e "${WARNING}${1} is not running"\
	320	"but ${PIDFILE} exists.${NORMAL}"
	321	else
	322	echo -e "${INFO}${1} is not running.${NORMAL}"
	323	fi
	324	fi
	325	fi
	326	}
	327
	328	# The below functions are documented in the LSB-generic 2.1.0
	329
	330	#*******************************************************************************
	331	# Function - pidofproc [-s] [-p pidfile] pathname
	332	#
	333	# Purpose: This function returns one or more pid(s) for a particular daemon
	334	#
	335	# Inputs: -p pidfile, use the specified pidfile instead of pidof
	336	# pathname, path to the specified program
	337	#
	338	# Outputs: return 0 - Success, pid's in stdout
	339	# return 1 - Program is dead, pidfile exists
	340	# return 2 - Invalid or excessive number of arguments,
	341	# warning in stdout
	342	# return 3 - Program is not running
	343	#
	344	# Dependencies: pidof, echo, head
	345	#
	346	# Todo: Remove dependency on head
	347	# This depreciates getpids
	348	# Test changes to pidof
	349	#
	350	#*******************************************************************************
	351	pidofproc()
	352	{
	353	local pidfile=""
	354	local lpids=""
	355	local silent=""
	356	pidlist=""
	357	while true
	358	do
	359	case "${1}" in
	360	-p)
	361	pidfile="${2}"
	362	shift 2
	363	;;
	364
	365	-s)
	366	# Added for legacy opperation of getpids
	367	# eliminates several '> /dev/null'
	368	silent="1"
	369	shift 1
	370	;;
	371	-*)
	372	log_failure_msg "Unknown Option: ${1}"
	373	return 2
	374	;;
	375	*)
	376	break
	377	;;
	378	esac
	379	done
	380
	381	if [ "${#}" != "1" ]; then
	382	shift 1
	383	log_failure_msg "Usage: pidofproc [-s] [-p pidfile] pathname"
	384	return 2
	385	fi
	386
	387	if [ -n "${pidfile}" ]; then
	388	if [ ! -r "${pidfile}" ]; then
	389	return 3 # Program is not running
	390	fi
	391
	392	lpids=`head -n 1 ${pidfile}`
	393	for pid in ${lpids}
	394	do
	395	if [ "${pid}" -ne "$$" -a "${pid}" -ne "${PPID}" ]; then
	396	kill -0 "${pid}" > /dev/null &&
	397	pidlist="${pidlist} ${pid}"
	398	fi
	399
	400	if [ "${silent}" -ne "1" ]; then
	401	echo "${pidlist}"
	402	fi
	403
	404	test -z "${pidlist}" &&
	405	# Program is dead, pidfile exists
	406	return 1
	407	# else
	408	return 0
	409	done
	410
	411	else
	412	pidlist=`pidof -o $$ -o $PPID -x "$1"`
	413	if [ "x${silent}" != "x1" ]; then
	414	echo "${pidlist}"
	415	fi
	416
	417	# Get provide correct running status
	418	if [ -n "${pidlist}" ]; then
	419	return 0
	420	else
	421	return 3
	422	fi
	423
	424	fi
	425
	426	if [ "$?" != "0" ]; then
	427	return 3 # Program is not running
	428	fi
	429	}
	430
	431	# This will ensure compatibility with previous LFS Bootscripts
	432	getpids()
	433	{
	434	if [ -z "${PIDFILE}" ]; then
	435	pidofproc -s -p "${PIDFILE}" $@
	436	else
	437	pidofproc -s $@
	438	fi
	439	base="${1##*/}"
	440	}
	441
	442	#*******************************************************************************
	443	# Function - loadproc [-f] [-n nicelevel] [-p pidfile] pathname [args]
	444	#
	445	# Purpose: This runs the specified program as a daemon
	446	#
	447	# Inputs: -f, run the program even if it is already running
	448	# -n nicelevel, specifies a nice level. See nice(1).
	449	# -p pidfile, uses the specified pidfile
	450	# pathname, pathname to the specified program
	451	# args, arguments to pass to specified program
	452	#
	453	# Outputs: return 0 - Success
	454	# return 2 - Invalid of excessive number of arguments,
	455	# warning in stdout
	456	# return 4 - Program or service status is unknown
	457	#
	458	# Dependencies: nice
	459	#
	460	# Todo: LSB says this should be called start_daemon
	461	# LSB does not say that it should call evaluate_retval
	462	# It checks for PIDFILE, which is deprecated.
	463	# Will be removed after BLFS 6.0
	464	# loadproc returns 0 if program is already running, not LSB compliant
	465	#
	466	#*******************************************************************************
	467	loadproc()
	468	{
	469	local pidfile=""
	470	local forcestart=""
	471	local nicelevel="10"
	472
	473	# This will ensure compatibility with previous LFS Bootscripts
	474	if [ -n "${PIDFILE}" ]; then
	475	pidfile="${PIDFILE}"
	476	fi
	477
	478	while true
	479	do
	480	case "${1}" in
	481	-f)
	482	forcestart="1"
	483	shift 1
	484	;;
	485	-n)
	486	nicelevel="${2}"
	487	shift 2
	488	;;
	489	-p)
	490	pidfile="${2}"
	491	shift 2
	492	;;
	493	-*)
	494	log_failure_msg "Unknown Option: ${1}"
	495	return 2 #invalid or excess argument(s)
	496	;;
	497	*)
	498	break
	499	;;
	500	esac
	501	done
	502
	503	if [ "${#}" = "0" ]; then
	504	log_failure_msg "Usage: loadproc [-f] [-n nicelevel] [-p pidfile] pathname [args]"
	505	return 2 #invalid or excess argument(s)
	506	fi
	507
	508	if [ -z "${forcestart}" ]; then
	509	if [ -z "${pidfile}" ]; then
	510	pidofproc -s "${1}"
	511	else
	512	pidofproc -s -p "${pidfile}" "${1}"
	513	fi
	514
	515	case "${?}" in
	516	0)
	517	log_warning_msg "Unable to continue: ${1} is running"
	518	return 0 # 4
	519	;;
	520	1)
	521	log_warning_msg "Unable to continue: ${pidfile} exists"
	522	return 0 # 4
	523	;;
	524	3)
	525	;;
	526	*)
	527	log_failure_msg "Unknown error code from pidofproc: ${?}"
	528	return 4
	529	;;
	530	esac
	531	fi
	532
	533	nice -n "${nicelevel}" "${@}"
	534	evaluate_retval # This is "Probably" not LSB compliant, but required to be compatible with older bootscripts
	535	return 0
	536	}
	537
	538	#*******************************************************************************
	539	# Function - killproc [-p pidfile] pathname [signal]
	540	#
	541	# Purpose:
	542	#
	543	# Inputs: -p pidfile, uses the specified pidfile
	544	# pathname, pathname to the specified program
	545	# signal, send this signal to pathname
	546	#
	547	# Outputs: return 0 - Success
	548	# return 2 - Invalid of excessive number of arguments,
	549	# warning in stdout
	550	# return 4 - Unknown Status
	551	#
	552	# Dependencies: kill
	553	#
	554	# Todo: LSB does not say that it should call evaluate_retval
	555	# It checks for PIDFILE, which is deprecated.
	556	# Will be removed after BLFS 6.0
	557	#
	558	#*******************************************************************************
	559	killproc()
	560	{
	561	local pidfile=""
	562	local killsig=""
	563	pidlist=""
	564
	565	# This will ensure compatibility with previous LFS Bootscripts
	566	if [ -n "${PIDFILE}" ]; then
	567	pidfile="${PIDFILE}"
	568	fi
	569
	570	while true
	571	do
	572	case "${1}" in
	573	-p)
	574	pidfile="${2}"
	575	shift 2
	576	;;
	577	-*)
	578	log_failure_msg "Unknown Option: ${1}"
	579	return 2
	580	;;
	581	*)
	582	break
	583	;;
	584	esac
	585	done
	586
	587	if [ "${#}" = "2" ]; then
	588	killsig="${2}"
	589	elif [ "${#}" != "1" ]; then
	590	shift 2
	591	log_failure_msg "Usage: killproc [-p pidfile] pathname [signal]"
	592	return 2
	593	fi
	594
	595	if [ -z "${pidfile}" ]; then
	596	pidofproc -s "${1}"
	597	else
	598	pidofproc -s -p "${pidfile}" "${1}"
	599	fi
	600
	601	# Change....
	602	if [ -n "${pidlist}" ]; then
	603	for pid in ${pidlist}
	604	do
	605	kill -${killsig:-TERM} ${pid} 2>/dev/null
	606	if [ -z "${killsig}" ]; then
	607	# Wait up to 3 seconds, for ${pid} to terminate
	608	local dtime=${KILLDELAY}
	609	while [ "${dtime}" != "0" ]
	610	do
	611	kill -0 ${pid} 2>/dev/null \|\| break
	612	sleep 1
	613	dtime=$(( ${dtime} - 1))
	614	done
	615	# If ${pid} is still running, kill it
	616	kill -0 ${pid} 2>/dev/null && kill -KILL ${pid} 2>/dev/null
	617	fi
	618	done
	619
	620	if [ -z "${killsig}" ]; then
	621	pidofproc -s "${1}"
	622
	623	# Program was terminated
	624	if [ "$?" != "0" ]; then
	625	# Pidfile Exists
	626	if [ -f "${pidfile}" ]; then
	627	rm -f "${pidfile}"
	628	fi
	629	echo_ok
	630	return 0
	631	else # Program is still running
	632	echo_failure
	633	return 4 # Unknown Status
	634	fi
	635	else
	636	if [ -z "${pidfile}" ]; then
	637	pidofproc -s "${1}"
	638	else
	639	pidofproc -s -p "${pidfile}" "${1}"
	640	fi
	641	fi
	642
	643	evaluate_retval # This is "Probably" not LSB compliant, but required to be compatible with older bootscripts
	644
	645	else
	646	print_status warning not_running
	647	fi
	648	}
	649
	650
	651	#*******************************************************************************
	652	# Function - log_success_msg "message"
	653	#
	654	# Purpose: Print a success message
	655	#
	656	# Inputs: $@ - Message
	657	#
	658	# Outputs: Text output to screen
	659	#
	660	# Dependencies: echo
	661	#
	662	# Todo: logging
	663	#
	664	#*******************************************************************************
	665	log_success_msg()
	666	{
	667	echo -n -e "${BOOTMESG_PREFIX}${@}"
	668	echo -e "${SET_COL}""${BRACKET}""[""${SUCCESS}"" OK ""${BRACKET}""]""${NORMAL}"
	669	return 0
	670	}
	671
	672	#*******************************************************************************
	673	# Function - log_failure_msg "message"
	674	#
	675	# Purpose: Print a failure message
	676	#
	677	# Inputs: $@ - Message
	678	#
	679	# Outputs: Text output to screen
	680	#
	681	# Dependencies: echo
	682	#
	683	# Todo: logging
	684	#
	685	#*******************************************************************************
	686	log_failure_msg() {
	687	echo -n -e "${BOOTMESG_PREFIX}${@}"
	688	echo -e "${SET_COL}""${BRACKET}""[""${FAILURE}"" FAIL ""${BRACKET}""]""${NORMAL}"
	689	return 0
	690	}
	691
	692	#*******************************************************************************
	693	# Function - log_warning_msg "message"
	694	#
	695	# Purpose: print a warning message
	696	#
	697	# Inputs: $@ - Message
	698	#
	699	# Outputs: Text output to screen
	700	#
	701	# Dependencies: echo
	702	#
	703	# Todo: logging
	704	#
	705	#*******************************************************************************
	706	log_warning_msg() {
	707	echo -n -e "${BOOTMESG_PREFIX}${@}"
	708	echo -e "${SET_COL}""${BRACKET}""[""${WARNING}"" WARN ""${BRACKET}""]""${NORMAL}"
	709	return 0
	710	}
	711
	712	# End $rc_base/init.d/functions

Note: See TracBrowser for help on using the repository browser.

Download in other formats: