source: bootscripts/contrib/lsb/lib/init-functions@ 88d0ea4

clfs-1.2 clfs-2.1 clfs-3.0.0-systemd clfs-3.0.0-sysvinit systemd sysvinit
Last change on this file since 88d0ea4 was 163a6701, checked in by Jim Gifford <clfs@…>, 19 years ago

r720@server (orig r718): jim | 2005-11-18 08:06:26 -0800
Added bootscripts to cross-lfs svn

  • Property mode set to 100644
File size: 7.8 KB
Line 
1
2#*******************************************************************************
3# Function - start_daemon [-f] [-n nicelevel] [-p pidfile] pathname [args]
4#
5# Purpose: This runs the specified program as a daemon
6#
7# Inputs: -f, run the program even if it is already running
8# -n nicelevel, specifies a nice level. See nice(1).
9# -p pidfile, uses the specified pidfile
10# pathname, pathname to the specified program
11# args, arguments to pass to specified program
12#
13# Outputs: return 0 - Success
14# return 2 - Invalid or excessive number of arguments,
15# warning in stdout
16# return 4 - Program or service status is unknown
17#
18# Dependencies: nice
19#
20# Todo: none
21#
22#*******************************************************************************
23start_daemon()
24{
25 local pidfile=""
26 local forcestart=""
27 local nicelevel="0"
28
29 while true
30 do
31 case "${1}" in
32 -f)
33 forcestart="1"
34 shift 1
35 ;;
36 -n)
37 nicelevel="${2}"
38 shift 2
39 ;;
40 -p)
41 pidfile="${2}"
42 shift 2
43 ;;
44 -*)
45 log_failure_msg "Unknown Option: ${1}"
46 return 2
47 ;;
48 *)
49 break
50 ;;
51 esac
52 done
53
54 if [ -z "${forcestart}" ]; then
55 if [ -z "${pidfile}" ]; then
56 pidofproc "${1}" > /dev/null
57 else
58 pidofproc -p "${pidfile}" "${1}" > /dev/null
59 fi
60
61 case "${?}" in
62 0)
63 log_warning_msg "Unable to continue: ${1} is running"
64 return 4
65 ;;
66 1)
67 log_warning_msg "Unable to continue: ${pidfile} exists"
68 return 4
69 ;;
70 3)
71 ;;
72 *)
73 log_failure_msg "Unknown error code from pidofproc: ${?}"
74 return 4
75 ;;
76 esac
77 fi
78
79 nice -n "${nicelevel}" "${@}"
80}
81
82#*******************************************************************************
83# Function - killproc [-p pidfile] pathname [signal]
84#
85# Purpose:
86#
87# Inputs: -p pidfile, uses the specified pidfile
88# pathname, pathname to the specified program
89# signal, send this signal to pathname
90#
91# Outputs: return 0 - Success
92# return 1 - Invalid or excessive number of arguments,
93# warning in stdout
94# return 4 - Unknown Status
95#
96# Dependencies: kill
97#
98# Todo: test
99#
100#*******************************************************************************
101killproc()
102{
103 local pidfile=""
104 local killsig=""
105 local pidlist=""
106 while true
107 do
108 case "${1}" in
109 -p)
110 pidfile="${2}"
111 shift 2
112 ;;
113 -*)
114 log_failure_msg "Unknown Option: ${1}"
115 return 1
116 ;;
117 *)
118 break
119 ;;
120 esac
121 done
122
123 if [ "${#}" = "2" ]; then
124 killsig="${2}"
125 elif [ "${#}" != "1" ]; then
126 shift 2
127 log_failure_msg "Excess Arguments: $@"
128 return 1
129 fi
130
131 if [ -z "${pidfile}" ]; then
132 pidlist=`pidofproc "${1}"`
133 else
134 pidlist=`pidofproc -p "${pidfile}" "${1}"`
135 fi
136
137 for pid in ${pidlist}
138 do
139 kill -${killsig:-TERM} ${pid} 2> /dev/null
140 if [ -z "${killsig}" ]; then
141 # Wait up to 3 seconds, for ${pid} to terminate
142 local dtime=3
143 while [ "${dtime}" != "0" ]
144 do
145 kill -0 ${pid} 2> /dev/null || break
146 sleep 1
147 dtime=$(( ${dtime} - 1))
148 done
149 # If ${pid} is still running, kill it
150 kill -0 ${pid} 2> /dev/null && kill -KILL ${pid} 2> /dev/null
151 fi
152 done
153
154 if [ -z "${killsig}" ]; then
155 pidofproc "${1}" 2>&1 > /dev/null
156
157 # Program was terminated
158 if [ "$?" != "0" ]; then
159 # Pidfile Exists
160 if [ -f "${pidfile}" ]; then
161 rm -f "${pidfile}" 2>&1 > /dev/null
162 fi
163 return 0
164 else # Program is still running
165 return 4 # Unknown Status
166 fi
167 else
168 if [ -z "${pidfile}" ]; then
169 pidofproc "${1}" 2> /dev/null
170 else
171 pidofproc -p "${pidfile}" "${1}" 2> /dev/null
172 fi
173 fi
174}
175
176#*******************************************************************************
177# Function - pidofproc [-p pidfile] pathname
178#
179# Purpose: This function returns one or more pid(s) for a particular daemon
180#
181# Inputs: -p pidfile, use the specified pidfile instead of pidof
182# pathname, path to the specified program
183#
184# Outputs: return 0 - Success, pid's in stdout
185# return 1 - Invalid or excessive number of arguments,
186# warning in stdout
187# return 1 - Program is dead, pidfile exists
188# return 3 - Program is not running
189#
190# Dependencies: pidof, echo
191#
192# Todo: - Invalid or excessive argments, and program is dead pidfile exists
193# conflict with eachother
194#
195#*******************************************************************************
196pidofproc()
197{
198 local pidfile=""
199 local lpids=""
200 local pidlist=""
201 while true
202 do
203 case "${1}" in
204 -p)
205 pidfile="${2}"
206 shift 2
207 ;;
208 -*)
209 log_failure_msg "Unknown Option: ${1}"
210 return 1
211 ;;
212 *)
213 break
214 ;;
215 esac
216 done
217
218 if [ "${#}" != "1" ]; then
219 shift 1
220 log_failure_msg "Excess Arguments: $@"
221 return 1
222 fi
223
224 if [ -n "${pidfile}" ]; then
225 if [ ! -r "${pidfile}" ]; then
226 return 3 # Program is not running
227 fi
228
229 lpids=`head -n 1 ${pidfile}`
230 for pid in ${lpids}
231 do
232 if [ "${pid}" -ne "$$" -a "${pid}" -ne "${PPID}" ]; then
233 kill -0 "${pid}" 2> /dev/null &&
234 pidlist="${pidlist} ${pid}"
235 fi
236 echo ${pidlist}
237 test -z "${pidlist}" && return 1 # Program is dead, pidfile exists
238 return 0
239 done
240
241 else
242 pidof "${1}"
243 fi
244
245 if [ "$?" != "0" ]; then
246 return 3 # Program is not running
247 fi
248}
249
250# Screen Dimentions
251if [ -z "${COLUMNS}" ]; then
252 COLUMNS=$(stty size)
253 COLUMNS=${COLUMNS##* }
254fi
255
256# When using remote connections, such as a serial port, stty size returns 0
257if [ "${COLUMNS}" = "0" ]; then
258 COLUMNS=80
259fi
260
261# Measurements for positioning result messages
262COL=$((${COLUMNS} - 8))
263WCOL=$((${COL} - 2))
264
265# Set Cursur Position Commands, used via echo -e
266SET_COL="\\033[${COL}G" # at the $COL char
267SET_WCOL="\\033[${WCOL}G" # at the $WCOL char
268CURS_UP="\\033[1A\\033[0G" # Up one line, at the 0'th char
269
270# Set color commands, used via echo -e
271# Please consult `man console_codes` for more information
272# under the "Set Graphics Resolution" section
273#
274# Warning, when switching from a 8bit to a 9bit font,
275# the linux console will reinterpret the bold (1;) to
276# the top 256 glyphs of the 9bit font. This does
277# not affect framebuffer consoles
278NORMAL="\\033[0;39m" # Standard console grey
279SUCCESS="\\033[1;32m" # Success is green
280WARNING="\\033[1;33m" # Warnings are yellow
281FAILURE="\\033[1;31m" # Failures are red
282INFO="\\033[1;36m" # Information is light cyan
283BRACKET="\\033[1;34m" # Brackets are blue
284
285BOOTMESG_PREFIX=" * " # Text at the beginning of every line
286
287
288#*******************************************************************************
289# Function - log_success_msg "message"
290#
291# Purpose: Print a success message
292#
293# Inputs:
294#
295# Outputs:
296#
297# Dependencies: echo
298#
299# Todo: logging
300#
301#*******************************************************************************
302log_success_msg()
303{
304 echo -n -e "${BOOTMESG_PREFIX}${@}"
305 echo -e "${SET_COL}""${BRACKET}""[""${SUCCESS}"" OK ""${BRACKET}""]""${NORMAL}"
306 return 0
307}
308
309#*******************************************************************************
310# Function - log_failure_msg "message"
311#
312# Purpose: Print a failure message
313#
314# Inputs: $@ - Message
315#
316# Outputs: Text output to screen
317#
318# Dependencies: echo
319#
320# Todo: logging
321#
322#*******************************************************************************
323log_failure_msg() {
324 echo -n -e "${BOOTMESG_PREFIX}${@}"
325 echo -e "${SET_COL}""${BRACKET}""[""${FAILURE}"" FAIL ""${BRACKET}""]""${NORMAL}"
326 return 0
327}
328
329#*******************************************************************************
330# Function - log_warning_msg "message"
331#
332# Purpose: print a warning message
333#
334# Inputs: $@ - Message
335#
336# Outputs: Text output to screen
337#
338# Dependencies: echo
339#
340# Todo: logging
341#
342#*******************************************************************************
343log_warning_msg() {
344 echo -n -e "${BOOTMESG_PREFIX}${@}"
345 echo -e "${SET_COL}""${BRACKET}""[""${WARNING}"" WARN ""${BRACKET}""]""${NORMAL}"
346 return 0
347}
348
Note: See TracBrowser for help on using the repository browser.