source: BOOK/partitioning/common/creatingpartition.xml@ e9f5e6e

clfs-1.2 clfs-2.1 clfs-3.0.0-systemd clfs-3.0.0-sysvinit systemd sysvinit
Last change on this file since e9f5e6e was 040521bc, checked in by Jim Gifford <clfs@…>, 18 years ago

Sync up with 1.0 Book

  • Property mode set to 100644
File size: 2.6 KB
RevLine 
[3f8be484]1<?xml version="1.0" encoding="ISO-8859-1"?>
2<!DOCTYPE sect1 PUBLIC "-//OASIS//DTD DocBook XML V4.4//EN"
3 "http://www.oasis-open.org/docbook/xml/4.4/docbookx.dtd" [
4 <!ENTITY % general-entities SYSTEM "../../general.ent">
5 %general-entities;
6]>
7
8<sect1 id="ch-partitioning-creatingpartition">
9 <?dbhtml filename="creatingpartition.html"?>
10
11 <title>Creating a New Partition</title>
12
[a266616]13 <para os="a">Like most other operating systems, CLFS is usually installed
14 on a dedicated partition. The recommended approach to building a CLFS
[3f8be484]15 system is to use an available empty partition or, if you have enough
[a266616]16 unpartitioned space, to create one. However, if your building for a different
[040521bc]17 architecture you can simply build everything in <quote>/mnt/clfs</quote>
[a266616]18 and transfer it to your target machine.</para>
[3f8be484]19
[a266616]20 <para os="b">A minimal system requires around 1.5 gigabytes (GB).
[3f8be484]21 This is enough to store all the source tarballs and compile the packages.
[a8f30b25]22 However, if the CLFS system is intended to be the primary Linux system,
[3f8be484]23 additional software will probably be installed which will require
[fb40919]24 additional space (2-3 GB). The CLFS system itself will not take up this
[3f8be484]25 much room. A large portion of this requirement is to provide sufficient
26 free temporary storage. Compiling packages can require a lot of disk space
27 which will be reclaimed after the package is installed.</para>
28
29 <para os="c">Because there is not always enough Random Access Memory (RAM)
30 available for compilation processes, it is a good idea to use a small disk
31 partition as swap space. This is used by the kernel to store seldom-used
32 data and leave more memory available for active processes. The swap
[fb40919]33 partition for an CLFS system can be the same as the one used by the host
[3f8be484]34 system, in which case it is not necessary to create another one.</para>
35
36 <para os="d">Start a disk partitioning program such as <command>cfdisk</command>
37 or <command>fdisk</command> with a command line option naming the hard
38 disk on which the new partition will be created&mdash;for example
39 <filename class="devicefile">/dev/hda</filename> for the primary
40 Integrated Drive Electronics (IDE) disk. Create a Linux native partition
41 and a swap partition, if needed. Please refer to
42 <filename>cfdisk(8)</filename> or <filename>fdisk(8)</filename> if you
43 do not yet know how to use the programs.</para>
44
45 <para os="e">Remember the designation of the new partition (e.g.,
46 <filename class="devicefile">hda5</filename>). This book will refer to
[a8f30b25]47 this as the CLFS partition. Also remember the designation of the swap
[3f8be484]48 partition. These names will be needed later for the
49 <filename>/etc/fstab</filename> file.</para>
50
51</sect1>
Note: See TracBrowser for help on using the repository browser.