source: BOOK/introduction/common/changelog.xml @ c30e40f1

clfs-3.0.0-systemdclfs-3.0.0-sysvinitsystemdsysvinit
Last change on this file since c30e40f1 was c30e40f1, checked in by William Harrington <kb0iic@…>, 10 years ago

Add master changelog entry regarding nobdoy being a member of group nogroup.
  • Property mode set to 100644
File size: 15.9 KB
Line 
1<?xml version="1.0" encoding="ISO-8859-1"?>
2<!DOCTYPE sect1 PUBLIC "-//OASIS//DTD DocBook XML V4.5//EN"
3  "http://www.oasis-open.org/docbook/xml/4.5/docbookx.dtd" [
4  <!ENTITY % general-entities SYSTEM "../../general.ent">
5  %general-entities;
6]>
7
8<sect1 id="ch-intro-changelog" xreflabel="Master Changelog">
9  <?dbhtml filename="changelog.html"?>
10
11  <title>Master Changelog</title>
12
13  <para>This is version &version; of the Cross-Compiled Linux From Scratch
14  book, dated &releasedate;. If this book is more than six months old, a newer
15  and better version is probably already available. To find out, please check
16  one of the mirrors via <ulink url="&clfs-wiki;"/>.</para>
17
18  <para>Below is a list of detailed changes made since the previous release of
19   the book.</para>
20
21  <itemizedlist>
22    <title>Changelog Entries:</title>
23
24<!-- Changelog template
25
26    <listitem>
27      <para>Date</para>
28      <itemizedlist>
29        <listitem>
30          <para>[name] - Changelog entry.</para>
31        </listitem>
32        <listitem>
33          <para>[name] - Previous changelog entry.</para>
34        </listitem>
35      </itemizedlist>
36    </listitem>
37-->
38
39    <listitem>
40      <para>13 February 2014</para>
41      <itemizedlist>
42        <listitem>
43          <para>[William Harrington] - Correct nobody gid to use nogroup gid.</para>
44        </listitem>
45      </itemizedlist>
46    </listitem>
47
48    <listitem>
49      <para>03 February 2014</para>
50      <itemizedlist>
51        <listitem>
52          <para>[William Harrington] - Add configure options to systemd so loadkeys and setfont is searched in /bin instead of /usr/bin.</para>
53        </listitem>
54      </itemizedlist>
55    </listitem>
56
57    <listitem>
58      <para>02 February 2014</para>
59      <itemizedlist>
60        <listitem>
61          <para>[William Harrington] - Remove note in Iana-etc page and update iana-etc update numbers patch for proper operation with current iana-etc format.</para>
62        </listitem>
63      </itemizedlist>
64    </listitem>
65
66    <listitem>
67      <para>29 January 2014</para>
68      <itemizedlist>
69        <listitem>
70          <para>[William Harrington] - Add PKG_CONFIG= to temp-system make configure command.</para>
71        </listitem>
72      </itemizedlist>
73    </listitem>
74
75    <listitem>
76      <para>27 January 2014</para>
77      <itemizedlist>
78        <listitem>
79          <para>[William Harrington] - Add PERL=/usr/bin/perl to temp-system Texinfo build.</para>
80        </listitem>
81      </itemizedlist>
82    </listitem>
83
84    <listitem>
85      <para>26 January 2014</para>
86      <itemizedlist>
87        <listitem>
88          <para>[William Harrington] - Update LESS to 462.</para>
89        </listitem>
90      </itemizedlist>
91    </listitem>
92
93    <listitem>
94      <para>25 January 2014</para>
95      <itemizedlist>
96        <listitem>
97          <para>[William Harrington] - Create a link from /proc/self/mounts to /etc/mtab in boot and chroot createfiles section.</para>
98        </listitem>
99      </itemizedlist>
100    </listitem>
101
102    <listitem>
103      <para>23 January 2014</para>
104      <itemizedlist>
105        <listitem>
106          <para>[William Harrington] - Update text and redo some commands regarding Systemd in the System and Network configuration chapters.</para>
107        </listitem>
108        <listitem>
109          <para>[William Harrington] - Add a clock configuration script to system configuration chapter with regards to systemd.</para>
110        </listitem>
111        <listitem>
112          <para>[William Harrington] - Add CLFS-Network-Scripts and add commands to install them in the network configuration chapter.</para>
113        </listitem>
114        <listitem>
115          <para>[William Harrington] - Update Util-linux to 2.24.1.</para>
116        </listitem>
117        <listitem>
118          <para>[William Harrington] - Update Check to 0.9.12.</para>
119        </listitem>
120      </itemizedlist>
121    </listitem>
122
123    <listitem>
124      <para>21 January 2014</para>
125      <itemizedlist>
126        <listitem>
127          <para>[William Harrington] - Add D-Bus libraries before Systemd in final-system for a circular dependency issue.</para>
128        </listitem>
129      </itemizedlist>
130    </listitem>
131
132    <listitem>
133      <para>19 January 2014</para>
134      <itemizedlist>
135        <listitem>
136          <para>[William Harrington] - Update DHCPCD to 6.2.1.</para>
137        </listitem>
138        <listitem>
139          <para>[William Harrington] - Use readlink when creating links for dynamic libraries for zlib, xz, ncurses, and readline.</para>
140        </listitem>
141      </itemizedlist>
142    </listitem>
143
144    <listitem>
145      <para>13 January 2014</para>
146      <itemizedlist>
147        <listitem>
148          <para>[William Harrington] - Update ISL to 0.12.2.</para>
149        </listitem>
150        <listitem>
151          <para>[William Harrington] - Update Man-pages to 3.56.</para>
152        </listitem>
153      </itemizedlist>
154    </listitem>
155
156    <listitem>
157      <para>10 January 2014</para>
158      <itemizedlist>
159        <listitem>
160          <para>[William Harrington] - Migrate Procps to Procps-ng.</para>
161        </listitem>
162      </itemizedlist>
163    </listitem>
164
165    <listitem>
166      <para>09 January 2014</para>
167      <itemizedlist>
168        <listitem>
169          <para>[Chris] - Updated Linux to 3.12.7.</para>
170        </listitem>
171        <listitem>
172          <para>[Chris] - Updated Perl to 5.18.2.</para>
173        </listitem>
174        <listitem>
175          <para>[Chris] - Updated Gettext to 0.18.3.2.</para>
176        </listitem>
177        <listitem>
178          <para>[Chris] - Updated Libcap to 2.24.</para>
179        </listitem>
180        <listitem>
181          <para>[Chris] - Removed unneeded command to create a /usr/lib/terminfo
182          symlink from Ncurses instructions.</para>
183        </listitem>
184        <listitem>
185          <para>[Chris] - Removed /usr/{doc,info,man} symlinks and edited
186          instructions for packages to ensure all documentation is installed
187          to /usr/share.</para>
188        </listitem>
189        <listitem>
190          <para>[Chris] - Moved libcap so it's built just before iputils,
191          which can use libcap.</para>
192        </listitem>
193      </itemizedlist>
194    </listitem>
195
196    <listitem>
197      <para>08 January 2014</para>
198      <itemizedlist>
199        <listitem>
200          <para>[Chris] - Removed commands to create files in /var/run and
201          /var/log - systemd now used its journal for all logs.</para>
202        </listitem>
203        <listitem>
204          <para>[Chris] - Removed obsolete sed command from temp-system Coreutils.</para>
205        </listitem>
206        <listitem>
207          <para>[Chris] - Removed unneeded command to rename stubs-64.h.</para>
208        </listitem>
209        <listitem>
210          <para>[Chris] - Removed unneeded "make configure-host" commands
211          from Binutils.</para>
212        </listitem>
213        <listitem>
214          <para>[Chris] - Moved Attr and ACL to just after GCC in the final system.</para>
215        </listitem>
216      </itemizedlist>
217    </listitem>
218
219    <listitem>
220      <para>07 January 2014</para>
221      <itemizedlist>
222        <listitem>
223          <para>[Chris] - Added command, from LFS, to modify
224          /tools/lib/libstdc++.la to prevent a /tools reference in the final system.</para>
225        </listitem>
226        <listitem>
227          <para>[Chris] - Use libiberty from GCC, since Binutils no longer
228          installs it by default.</para>
229        </listitem>
230      </itemizedlist>
231    </listitem>
232
233    <listitem>
234      <para>06 January 2014</para>
235      <itemizedlist>
236        <listitem>
237          <para>[Chris] - Added msgmerge and xgettext to /tools Gettext
238          installation - needed for attr.</para>
239        </listitem>
240        <listitem>
241          <para>[William Harrington] - Update DHCPCD to 6.2.0.</para>
242        </listitem>
243        <listitem>
244          <para>[William Harrington] - Update Grep to 2.16.</para>
245        </listitem>
246      </itemizedlist>
247    </listitem>
248
249    <listitem>
250      <para>05 January 2014</para>
251      <itemizedlist>
252        <listitem>
253          <para>[Chris] - Removed rsyslog and its depedencies, libee and libestr.</para>
254        </listitem>
255        <listitem>
256          <para>[Chris] - Updated Expat to 2.1.0.</para>
257        </listitem>
258        <listitem>
259          <para>[Chris] - Updated Attr to 2.4.47.</para>
260        </listitem>
261        <listitem>
262          <para>[Chris] - Updated D-Bus to 1.6.18.</para>
263        </listitem>
264        <listitem>
265          <para>[Chris] - Updated Libcap to 2.23.</para>
266        </listitem>
267      </itemizedlist>
268    </listitem>
269
270    <listitem>
271      <para>04 January 2014</para>
272      <itemizedlist>
273        <listitem>
274          <para>[Chris] - Updated Systemd to 208.</para>
275        </listitem>
276        <listitem>
277          <para>[Chris] - Added Gperf, XML::Parser, Intltool, and ACL - needed
278          by systemd.</para>
279        </listitem>
280      </itemizedlist>
281    </listitem>
282
283    <listitem>
284      <para>01 January 2014</para>
285      <itemizedlist>
286        <listitem>
287          <para>[Chris] - Added command to EGLIBC instructions to remove
288          extraneous '.x' files from /usr/include/rpcsvc.</para>
289        </listitem>
290      </itemizedlist>
291    </listitem>
292
293    <listitem>
294      <para>23 December 2013</para>
295      <itemizedlist>
296        <listitem>
297          <para>[William Harrington] - Update E2fsprogs to 1.42.9.</para>
298        </listitem>
299        <listitem>
300          <para>[William Harrington] - Update Automake to 1.14.1.</para>
301        </listitem>
302      </itemizedlist>
303    </listitem>
304
305    <listitem>
306      <para>21 December 2013</para>
307      <itemizedlist>
308        <listitem>
309          <para>[William Harrington] - Update CLooG to 0.18.2.</para>
310        </listitem>
311        <listitem>
312          <para>[William Harrington] - Update Tzdata to 2013i.</para>
313        </listitem>
314        <listitem>
315          <para>[William Harrington] - Update EGLIBC 2.18 to revision 24829.</para>
316        </listitem>
317        <listitem>
318          <para>[William Harrington] - Update Linux to 3.12.6.</para>
319        </listitem>
320      </itemizedlist>
321    </listitem>
322
323    <listitem>
324      <para>14 December 2013</para>
325      <itemizedlist>
326        <listitem>
327          <para>[William Harrington] - Update Coreutils to 8.22.</para>
328        </listitem>
329        <listitem>
330          <para>[William Harrington] - Update Man-pages to 3.55.</para>
331        </listitem>
332      </itemizedlist>
333    </listitem>
334
335    <listitem>
336      <para>08 December 2013</para>
337      <itemizedlist>
338        <listitem>
339          <para>[William Harrington] - Update Bison to 3.0.2.</para>
340        </listitem>
341      </itemizedlist>
342    </listitem>
343
344    <listitem>
345      <para>06 December 2013</para>
346      <itemizedlist>
347        <listitem>
348          <para>[Chris] - Modified XZ instructions so that it won't install
349          liblzma.{a,la} in /lib.</para>
350        </listitem>
351      </itemizedlist>
352    </listitem>
353
354    <listitem>
355      <para>04 December 2013</para>
356      <itemizedlist>
357        <listitem>
358          <para>[William Harrington] - Updated Binutils to version 2.24.</para>
359        </listitem>
360        <listitem>
361          <para>[William Harrington] - Updated File to version 5.16.</para>
362        </listitem>
363      </itemizedlist>
364    </listitem>
365
366    <listitem>
367      <para>26 November 2013</para>
368      <itemizedlist>
369        <listitem>
370          <para>[Chris] - Updated installed program lists for several packages.</para>
371        </listitem>
372        <listitem>
373          <para>[Chris] - Removed redundant --disable-su and --disable-login
374          switches from Util-linux - they aren't built anyway if PAM isn't found.</para>
375        </listitem>
376      </itemizedlist>
377    </listitem>
378
379    <listitem>
380      <para>25 November 2013</para>
381      <itemizedlist>
382        <listitem>
383          <para>[William Harrington] - Update Iproute2 to 3.12.0.</para>
384        </listitem>
385        <listitem>
386          <para>[William Harrington] - Update Tar to 1.27.1.</para>
387        </listitem>
388      </itemizedlist>
389    </listitem>
390
391    <listitem>
392      <para>23 November 2013</para>
393      <itemizedlist>
394        <listitem>
395          <para>[Chris] - Use nologin from Util-linux instead of Shadow.</para>
396        </listitem>
397      </itemizedlist>
398    </listitem>
399
400    <listitem>
401      <para>22 November 2013</para>
402      <itemizedlist>
403        <listitem>
404          <para>[Chris] - Util-linux now installs last and mesg by
405          default, so use those instead of the versions in Sysvinit.</para>
406        </listitem>
407      </itemizedlist>
408    </listitem>
409
410    <listitem>
411      <para>18 November 2013</para>
412      <itemizedlist>
413        <listitem>
414          <para>[William Harrington] - Move creation of dummy groups and user to final-system Util-linux.</para>
415        </listitem>
416        <listitem>
417          <para>[William Harrington] - Remove SUBDIRS variable from final-system Coreutils test command.</para>
418        </listitem>
419        <listitem>
420          <para>[William Harrington] - Adjust Util-linux test commands.</para>
421        </listitem>
422      </itemizedlist>
423    </listitem>
424
425    <listitem>
426      <para>13 November 2013</para>
427      <itemizedlist>
428        <listitem>
429          <para>[William Harrington] - Adjust Util-linux check commands.</para>
430        </listitem>
431        <listitem>
432          <para>[William Harrington] - Move Shadow before Util-Linux in final-system.</para>
433        </listitem>
434        <listitem>
435          <para>[William Harrington] - Update Bison to 3.0.1.</para>
436        </listitem>
437        <listitem>
438          <para>[William Harrington] - Remove Bison 3.0 eof patch.</para>
439        </listitem>
440      </itemizedlist>
441    </listitem>
442
443    <listitem>
444      <para>11 November 2013</para>
445      <itemizedlist>
446        <listitem>
447          <para>[William Harrington] - Update TZDATA to 2013h.</para>
448        </listitem>
449        <listitem>
450          <para>[William Harrington] - Add MPFR 3.1.2 Fixes patch.</para>
451        </listitem>
452        <listitem>
453          <para>[William Harrington] - Update Grep to 2.15.</para>
454        </listitem>
455        <listitem>
456          <para>[William Harrington] - Update Linux to 3.12.</para>
457        </listitem>
458        <listitem>
459          <para>[William Harrington] - Add a sed for Texinfo 5.x to all sections of Binutils.</para>
460        </listitem>
461        <listitem>
462          <para>[William Harrington] - Update Texinfo to 5.2.</para>
463        </listitem>
464        <listitem>
465          <para>[William Harrington] - Update KBD to 2.0.1.</para>
466        </listitem>
467        <listitem>
468          <para>[William Harrington] - Update Check to 0.9.11.</para>
469        </listitem>
470        <listitem>
471          <para>[William Harrington] - Update Automake to 1.14.</para>
472        </listitem>
473        <listitem>
474          <para>[William Harrington] - Update Make to 4.0.</para>
475        </listitem>
476        <listitem>
477          <para>[William Harrington] - Add a Sed command to EGLIBC for Make-4.x.</para>
478        </listitem>
479        <listitem>
480          <para>[William Harrington] - Move Check to temp-system.</para>
481        </listitem>
482      </itemizedlist>
483    </listitem>
484
485    <listitem>
486      <para>09 November 2013</para>
487      <itemizedlist>
488        <listitem>
489          <para>[William Harrington] - Add PKG_CONFIG= in front of configure line for chroot and boot Util-linux for hosts with pkg-config installed.</para>
490        </listitem>
491      </itemizedlist>
492    </listitem>
493
494    <listitem>
495      <para>25 October 2013</para>
496      <itemizedlist>
497       <listitem>
498          <para>[William Harrington] - Updated Util-Linux to 2.24.</para>
499        </listitem>
500       <listitem>
501          <para>[William Harrington] - Updated Tar to 1.27.</para>
502        </listitem>
503       <listitem>
504          <para>[William Harrington] - Updated Linux to 3.10.17.</para>
505        </listitem>
506       <listitem>
507          <para>[William Harrington] - Updated GCC to 4.8.2.</para>
508        </listitem>
509        <listitem>
510          <para>[William Harrington] - Updated CLooG to 0.18.1.</para>
511        </listitem>
512
513        <listitem>
514          <para>[William Harrington] - Changelog restarted, see the 2.1.0 book for the old changelog.</para>
515        </listitem>
516      </itemizedlist>
517    </listitem>
518
519  </itemizedlist>
520
521</sect1>
Note: See TracBrowser for help on using the repository browser.