source: BOOK/introduction/common/changelog.xml@ 7ffbb9c

clfs-3.0.0-systemd clfs-3.0.0-sysvinit systemd sysvinit
Last change on this file since 7ffbb9c was c03296c, checked in by William Harrington <kb0iic@…>, 11 years ago

Add master changelog entry for adding PKG_CONFIG= to beginning of temp system make configure command.
  • Property mode set to 100644
File size: 15.0 KB
Line 
1<?xml version="1.0" encoding="ISO-8859-1"?>
2<!DOCTYPE sect1 PUBLIC "-//OASIS//DTD DocBook XML V4.5//EN"
3 "http://www.oasis-open.org/docbook/xml/4.5/docbookx.dtd" [
4 <!ENTITY % general-entities SYSTEM "../../general.ent">
5 %general-entities;
6]>
7
8<sect1 id="ch-intro-changelog" xreflabel="Master Changelog">
9 <?dbhtml filename="changelog.html"?>
10
11 <title>Master Changelog</title>
12
13 <para>This is version &version; of the Cross-Compiled Linux From Scratch
14 book, dated &releasedate;. If this book is more than six months old, a newer
15 and better version is probably already available. To find out, please check
16 one of the mirrors via <ulink url="&clfs-wiki;"/>.</para>
17
18 <para>Below is a list of detailed changes made since the previous release of
19 the book.</para>
20
21 <itemizedlist>
22 <title>Changelog Entries:</title>
23
24<!-- Changelog template
25
26 <listitem>
27 <para>Date</para>
28 <itemizedlist>
29 <listitem>
30 <para>[name] - Changelog entry.</para>
31 </listitem>
32 <listitem>
33 <para>[name] - Previous changelog entry.</para>
34 </listitem>
35 </itemizedlist>
36 </listitem>
37-->
38
39 <listitem>
40 <para>29 January 2014</para>
41 <itemizedlist>
42 <listitem>
43 <para>[William Harrington] - Add PKG_CONFIG= to temp-system make configure command.</para>
44 </listitem>
45 </itemizedlist>
46 </listitem>
47
48 <listitem>
49 <para>27 January 2014</para>
50 <itemizedlist>
51 <listitem>
52 <para>[William Harrington] - Add PERL=/usr/bin/perl to temp-system Texinfo build.</para>
53 </listitem>
54 </itemizedlist>
55 </listitem>
56
57 <listitem>
58 <para>26 January 2014</para>
59 <itemizedlist>
60 <listitem>
61 <para>[William Harrington] - Update LESS to 462.</para>
62 </listitem>
63 </itemizedlist>
64 </listitem>
65
66 <listitem>
67 <para>25 January 2014</para>
68 <itemizedlist>
69 <listitem>
70 <para>[William Harrington] - Create a link from /proc/self/mounts to /etc/mtab in boot and chroot createfiles section.</para>
71 </listitem>
72 </itemizedlist>
73 </listitem>
74
75 <listitem>
76 <para>23 January 2014</para>
77 <itemizedlist>
78 <listitem>
79 <para>[William Harrington] - Update text and redo some commands regarding Systemd in the System and Network configuration chapters.</para>
80 </listitem>
81 <listitem>
82 <para>[William Harrington] - Add a clock configuration script to system configuration chapter with regards to systemd.</para>
83 </listitem>
84 <listitem>
85 <para>[William Harrington] - Add CLFS-Network-Scripts and add commands to install them in the network configuration chapter.</para>
86 </listitem>
87 <listitem>
88 <para>[William Harrington] - Update Util-linux to 2.24.1.</para>
89 </listitem>
90 <listitem>
91 <para>[William Harrington] - Update Check to 0.9.12.</para>
92 </listitem>
93 </itemizedlist>
94 </listitem>
95
96 <listitem>
97 <para>21 January 2014</para>
98 <itemizedlist>
99 <listitem>
100 <para>[William Harrington] - Add D-Bus libraries before Systemd in final-system for a circular dependency issue.</para>
101 </listitem>
102 </itemizedlist>
103 </listitem>
104
105 <listitem>
106 <para>19 January 2014</para>
107 <itemizedlist>
108 <listitem>
109 <para>[William Harrington] - Update DHCPCD to 6.2.1.</para>
110 </listitem>
111 <listitem>
112 <para>[William Harrington] - Use readlink when creating links for dynamic libraries for zlib, xz, ncurses, and readline.</para>
113 </listitem>
114 </itemizedlist>
115 </listitem>
116
117 <listitem>
118 <para>13 January 2014</para>
119 <itemizedlist>
120 <listitem>
121 <para>[William Harrington] - Update ISL to 0.12.2.</para>
122 </listitem>
123 <listitem>
124 <para>[William Harrington] - Update Man-pages to 3.56.</para>
125 </listitem>
126 </itemizedlist>
127 </listitem>
128
129 <listitem>
130 <para>10 January 2014</para>
131 <itemizedlist>
132 <listitem>
133 <para>[William Harrington] - Migrate Procps to Procps-ng.</para>
134 </listitem>
135 </itemizedlist>
136 </listitem>
137
138 <listitem>
139 <para>09 January 2014</para>
140 <itemizedlist>
141 <listitem>
142 <para>[Chris] - Updated Linux to 3.12.7.</para>
143 </listitem>
144 <listitem>
145 <para>[Chris] - Updated Perl to 5.18.2.</para>
146 </listitem>
147 <listitem>
148 <para>[Chris] - Updated Gettext to 0.18.3.2.</para>
149 </listitem>
150 <listitem>
151 <para>[Chris] - Updated Libcap to 2.24.</para>
152 </listitem>
153 <listitem>
154 <para>[Chris] - Removed unneeded command to create a /usr/lib/terminfo
155 symlink from Ncurses instructions.</para>
156 </listitem>
157 <listitem>
158 <para>[Chris] - Removed /usr/{doc,info,man} symlinks and edited
159 instructions for packages to ensure all documentation is installed
160 to /usr/share.</para>
161 </listitem>
162 <listitem>
163 <para>[Chris] - Moved libcap so it's built just before iputils,
164 which can use libcap.</para>
165 </listitem>
166 </itemizedlist>
167 </listitem>
168
169 <listitem>
170 <para>08 January 2014</para>
171 <itemizedlist>
172 <listitem>
173 <para>[Chris] - Removed commands to create files in /var/run and
174 /var/log - systemd now used its journal for all logs.</para>
175 </listitem>
176 <listitem>
177 <para>[Chris] - Removed obsolete sed command from temp-system Coreutils.</para>
178 </listitem>
179 <listitem>
180 <para>[Chris] - Removed unneeded command to rename stubs-64.h.</para>
181 </listitem>
182 <listitem>
183 <para>[Chris] - Removed unneeded "make configure-host" commands
184 from Binutils.</para>
185 </listitem>
186 <listitem>
187 <para>[Chris] - Moved Attr and ACL to just after GCC in the final system.</para>
188 </listitem>
189 </itemizedlist>
190 </listitem>
191
192 <listitem>
193 <para>07 January 2014</para>
194 <itemizedlist>
195 <listitem>
196 <para>[Chris] - Added command, from LFS, to modify
197 /tools/lib/libstdc++.la to prevent a /tools reference in the final system.</para>
198 </listitem>
199 <listitem>
200 <para>[Chris] - Use libiberty from GCC, since Binutils no longer
201 installs it by default.</para>
202 </listitem>
203 </itemizedlist>
204 </listitem>
205
206 <listitem>
207 <para>06 January 2014</para>
208 <itemizedlist>
209 <listitem>
210 <para>[Chris] - Added msgmerge and xgettext to /tools Gettext
211 installation - needed for attr.</para>
212 </listitem>
213 <listitem>
214 <para>[William Harrington] - Update DHCPCD to 6.2.0.</para>
215 </listitem>
216 <listitem>
217 <para>[William Harrington] - Update Grep to 2.16.</para>
218 </listitem>
219 </itemizedlist>
220 </listitem>
221
222 <listitem>
223 <para>05 January 2014</para>
224 <itemizedlist>
225 <listitem>
226 <para>[Chris] - Removed rsyslog and its depedencies, libee and libestr.</para>
227 </listitem>
228 <listitem>
229 <para>[Chris] - Updated Expat to 2.1.0.</para>
230 </listitem>
231 <listitem>
232 <para>[Chris] - Updated Attr to 2.4.47.</para>
233 </listitem>
234 <listitem>
235 <para>[Chris] - Updated D-Bus to 1.6.18.</para>
236 </listitem>
237 <listitem>
238 <para>[Chris] - Updated Libcap to 2.23.</para>
239 </listitem>
240 </itemizedlist>
241 </listitem>
242
243 <listitem>
244 <para>04 January 2014</para>
245 <itemizedlist>
246 <listitem>
247 <para>[Chris] - Updated Systemd to 208.</para>
248 </listitem>
249 <listitem>
250 <para>[Chris] - Added Gperf, XML::Parser, Intltool, and ACL - needed
251 by systemd.</para>
252 </listitem>
253 </itemizedlist>
254 </listitem>
255
256 <listitem>
257 <para>01 January 2014</para>
258 <itemizedlist>
259 <listitem>
260 <para>[Chris] - Added command to EGLIBC instructions to remove
261 extraneous '.x' files from /usr/include/rpcsvc.</para>
262 </listitem>
263 </itemizedlist>
264 </listitem>
265
266 <listitem>
267 <para>23 December 2013</para>
268 <itemizedlist>
269 <listitem>
270 <para>[William Harrington] - Update E2fsprogs to 1.42.9.</para>
271 </listitem>
272 <listitem>
273 <para>[William Harrington] - Update Automake to 1.14.1.</para>
274 </listitem>
275 </itemizedlist>
276 </listitem>
277
278 <listitem>
279 <para>21 December 2013</para>
280 <itemizedlist>
281 <listitem>
282 <para>[William Harrington] - Update CLooG to 0.18.2.</para>
283 </listitem>
284 <listitem>
285 <para>[William Harrington] - Update Tzdata to 2013i.</para>
286 </listitem>
287 <listitem>
288 <para>[William Harrington] - Update EGLIBC 2.18 to revision 24829.</para>
289 </listitem>
290 <listitem>
291 <para>[William Harrington] - Update Linux to 3.12.6.</para>
292 </listitem>
293 </itemizedlist>
294 </listitem>
295
296 <listitem>
297 <para>14 December 2013</para>
298 <itemizedlist>
299 <listitem>
300 <para>[William Harrington] - Update Coreutils to 8.22.</para>
301 </listitem>
302 <listitem>
303 <para>[William Harrington] - Update Man-pages to 3.55.</para>
304 </listitem>
305 </itemizedlist>
306 </listitem>
307
308 <listitem>
309 <para>08 December 2013</para>
310 <itemizedlist>
311 <listitem>
312 <para>[William Harrington] - Update Bison to 3.0.2.</para>
313 </listitem>
314 </itemizedlist>
315 </listitem>
316
317 <listitem>
318 <para>06 December 2013</para>
319 <itemizedlist>
320 <listitem>
321 <para>[Chris] - Modified XZ instructions so that it won't install
322 liblzma.{a,la} in /lib.</para>
323 </listitem>
324 </itemizedlist>
325 </listitem>
326
327 <listitem>
328 <para>04 December 2013</para>
329 <itemizedlist>
330 <listitem>
331 <para>[William Harrington] - Updated Binutils to version 2.24.</para>
332 </listitem>
333 <listitem>
334 <para>[William Harrington] - Updated File to version 5.16.</para>
335 </listitem>
336 </itemizedlist>
337 </listitem>
338
339 <listitem>
340 <para>26 November 2013</para>
341 <itemizedlist>
342 <listitem>
343 <para>[Chris] - Updated installed program lists for several packages.</para>
344 </listitem>
345 <listitem>
346 <para>[Chris] - Removed redundant --disable-su and --disable-login
347 switches from Util-linux - they aren't built anyway if PAM isn't found.</para>
348 </listitem>
349 </itemizedlist>
350 </listitem>
351
352 <listitem>
353 <para>25 November 2013</para>
354 <itemizedlist>
355 <listitem>
356 <para>[William Harrington] - Update Iproute2 to 3.12.0.</para>
357 </listitem>
358 <listitem>
359 <para>[William Harrington] - Update Tar to 1.27.1.</para>
360 </listitem>
361 </itemizedlist>
362 </listitem>
363
364 <listitem>
365 <para>23 November 2013</para>
366 <itemizedlist>
367 <listitem>
368 <para>[Chris] - Use nologin from Util-linux instead of Shadow.</para>
369 </listitem>
370 </itemizedlist>
371 </listitem>
372
373 <listitem>
374 <para>22 November 2013</para>
375 <itemizedlist>
376 <listitem>
377 <para>[Chris] - Util-linux now installs last and mesg by
378 default, so use those instead of the versions in Sysvinit.</para>
379 </listitem>
380 </itemizedlist>
381 </listitem>
382
383 <listitem>
384 <para>18 November 2013</para>
385 <itemizedlist>
386 <listitem>
387 <para>[William Harrington] - Move creation of dummy groups and user to final-system Util-linux.</para>
388 </listitem>
389 <listitem>
390 <para>[William Harrington] - Remove SUBDIRS variable from final-system Coreutils test command.</para>
391 </listitem>
392 <listitem>
393 <para>[William Harrington] - Adjust Util-linux test commands.</para>
394 </listitem>
395 </itemizedlist>
396 </listitem>
397
398 <listitem>
399 <para>13 November 2013</para>
400 <itemizedlist>
401 <listitem>
402 <para>[William Harrington] - Adjust Util-linux check commands.</para>
403 </listitem>
404 <listitem>
405 <para>[William Harrington] - Move Shadow before Util-Linux in final-system.</para>
406 </listitem>
407 <listitem>
408 <para>[William Harrington] - Update Bison to 3.0.1.</para>
409 </listitem>
410 <listitem>
411 <para>[William Harrington] - Remove Bison 3.0 eof patch.</para>
412 </listitem>
413 </itemizedlist>
414 </listitem>
415
416 <listitem>
417 <para>11 November 2013</para>
418 <itemizedlist>
419 <listitem>
420 <para>[William Harrington] - Update TZDATA to 2013h.</para>
421 </listitem>
422 <listitem>
423 <para>[William Harrington] - Add MPFR 3.1.2 Fixes patch.</para>
424 </listitem>
425 <listitem>
426 <para>[William Harrington] - Update Grep to 2.15.</para>
427 </listitem>
428 <listitem>
429 <para>[William Harrington] - Update Linux to 3.12.</para>
430 </listitem>
431 <listitem>
432 <para>[William Harrington] - Add a sed for Texinfo 5.x to all sections of Binutils.</para>
433 </listitem>
434 <listitem>
435 <para>[William Harrington] - Update Texinfo to 5.2.</para>
436 </listitem>
437 <listitem>
438 <para>[William Harrington] - Update KBD to 2.0.1.</para>
439 </listitem>
440 <listitem>
441 <para>[William Harrington] - Update Check to 0.9.11.</para>
442 </listitem>
443 <listitem>
444 <para>[William Harrington] - Update Automake to 1.14.</para>
445 </listitem>
446 <listitem>
447 <para>[William Harrington] - Update Make to 4.0.</para>
448 </listitem>
449 <listitem>
450 <para>[William Harrington] - Add a Sed command to EGLIBC for Make-4.x.</para>
451 </listitem>
452 <listitem>
453 <para>[William Harrington] - Move Check to temp-system.</para>
454 </listitem>
455 </itemizedlist>
456 </listitem>
457
458 <listitem>
459 <para>09 November 2013</para>
460 <itemizedlist>
461 <listitem>
462 <para>[William Harrington] - Add PKG_CONFIG= in front of configure line for chroot and boot Util-linux for hosts with pkg-config installed.</para>
463 </listitem>
464 </itemizedlist>
465 </listitem>
466
467 <listitem>
468 <para>25 October 2013</para>
469 <itemizedlist>
470 <listitem>
471 <para>[William Harrington] - Updated Util-Linux to 2.24.</para>
472 </listitem>
473 <listitem>
474 <para>[William Harrington] - Updated Tar to 1.27.</para>
475 </listitem>
476 <listitem>
477 <para>[William Harrington] - Updated Linux to 3.10.17.</para>
478 </listitem>
479 <listitem>
480 <para>[William Harrington] - Updated GCC to 4.8.2.</para>
481 </listitem>
482 <listitem>
483 <para>[William Harrington] - Updated CLooG to 0.18.1.</para>
484 </listitem>
485
486 <listitem>
487 <para>[William Harrington] - Changelog restarted, see the 2.1.0 book for the old changelog.</para>
488 </listitem>
489 </itemizedlist>
490 </listitem>
491
492 </itemizedlist>
493
494</sect1>
Note: See TracBrowser for help on using the repository browser.