source: BOOK/introduction/common/changelog.xml@ 480230bc

<?xml version="1.0" encoding="ISO-8859-1"?>
<!DOCTYPE sect1 PUBLIC "-//OASIS//DTD DocBook XML V4.5//EN"
  "http://www.oasis-open.org/docbook/xml/4.5/docbookx.dtd" [
  <!ENTITY % general-entities SYSTEM "../../general.ent">
  %general-entities;
]>

<sect1 id="ch-intro-changelog" xreflabel="Master Changelog">
  <?dbhtml filename="changelog.html"?>

  <title>Master Changelog</title>

  <para>This is version &version; of the Cross-Compiled Linux From Scratch
  book, dated &releasedate;. If this book is more than six months old, a newer
  and better version is probably already available. To find out, please check
  one of the mirrors via <ulink url="&clfs-wiki;"/>.</para>

  <para>Below is a list of detailed changes made since the previous release of
   the book.</para>

  <itemizedlist>
    <title>Changelog Entries:</title>

<!-- Changelog template

    <listitem>
      <para>Date</para>
      <itemizedlist>
        <listitem>
          <para>[name] - Changelog entry.</para>
        </listitem>
        <listitem>
          <para>[name] - Previous changelog entry.</para>
        </listitem>
      </itemizedlist>
    </listitem>
-->

    <listitem>
      <para>18 August 2014</para>
      <itemizedlist>
        <listitem>
          <para>[Chris] - Removed obsolete --with-tls and --with-__thread
          options from Cross-Tools Glibc builds - those options have long since
          been removed from Glibc.</para>
        </listitem>
      </itemizedlist>
    </listitem>

    <listitem>
      <para>17 August 2014</para>
      <itemizedlist>
        <listitem>
          <para>[Chris] - Combined Makefile modification commands in
          Boot section Shadow install into one command.</para>
        </listitem>
        <listitem>
          <para>[Chris] - Removed redundant command explanation from
          Less installation page.</para>
        </listitem>
      </itemizedlist>
    </listitem>

    <listitem>
      <para>14 August 2014</para>
      <itemizedlist>
        <listitem>
          <para>[Chris] - Removed obsolete command to disable test lib
          in Glibc instructions.</para>
        </listitem>
      </itemizedlist>
    </listitem>

    <listitem>
      <para>10 August 2014</para>
      <itemizedlist>
        <listitem>
          <para>[Chris] - Removed several switches from GCC builds for options
          that are enabled by default.</para>
        </listitem>
        <listitem>
          <para>[Chris] - Removed --enable-multibyte switch from Vim pages,
          since multibyte support is enabled by default.</para>
        </listitem>
        <listitem>
          <para>[Chris] - Removed --enable-shared switch from CLooG pages;
          shared libraries are built by default.</para>
        </listitem>
      </itemizedlist>
    </listitem>

    <listitem>
      <para>09 August 2014</para>
      <itemizedlist>
        <listitem>
          <para>[Chris] - Redo top index to list by arch, then 32/64/multilib
          within each arch.</para>
        </listitem>
        <listitem>
          <para>[Chris] - Removed "M4=m4" from final-system Bison and Flex
          pages, since m4 is now installed before them.</para>
        </listitem>
      </itemizedlist>
    </listitem>

    <listitem>
      <para>07 August 2014</para>
      <itemizedlist>
        <listitem>
          <para>[Chris] - Updated Linux sublevel patch to 3.14.16.</para>
        </listitem>
      </itemizedlist>
    </listitem>

    <listitem>
      <para>05 August 2014</para>
      <itemizedlist>
        <listitem>
          <para>[Chris] - Reversed change to Vim's docs location, so that
          Vim can find its help files.</para>
        </listitem>
      </itemizedlist>
    </listitem>

    <listitem>
      <para>01 August 2014</para>
      <itemizedlist>
        <listitem>
          <para>[Chris] - Updated Linux sublevel to 3.14.15.</para>
        </listitem>
        <listitem>
          <para>[Chris] - Build Pkg-config-lite before Ncurses in the final
          system, so that Ncurses will install .pc files.</para>
        </listitem>
        <listitem>
          <para>[Chris] - Move Bzip2 before Perl and modify Perl instructions
          to use system-install Bzip2. Solution borrowed from LFS.</para>
        </listitem>
      </itemizedlist>
    </listitem>

    <listitem>
      <para>28 July 2014</para>
      <itemizedlist>
        <listitem>
          <para>[Chris] - Removed unneeded notes about the importance of the
          testuites for GMP, MPFR, MPC, ISL, and CLooG.</para>
        </listitem>
      </itemizedlist>
    </listitem>

    <listitem>
      <para>24 July 2014</para>
      <itemizedlist>
        <listitem>
          <para>[Chris] - Added config flag descriptions to kernel config
          pages. Thanks to Hazel Russman for the idea.</para>
        </listitem>
        <listitem>
          <para>[Chris] - Removed commands to recreate /usr/share/info
          to reduce possible user confusion.</para>
        </listitem>
      </itemizedlist>
    </listitem>

    <listitem>
      <para>21 July 2014</para>
      <itemizedlist>
        <listitem>
          <para>[William Harrington] - Update MPFR 3.1.2 fixes patch for patch
          level 10 update.</para>
        </listitem>
        <listitem>
          <para>[William Harrington] - Update VIM 7.4 Branch Update patch to
          patch level 373.</para>
        </listitem>
        <listitem>
          <para>[William Harrington] - Update Linux to 3.14.13.</para>
        </listitem>
      </itemizedlist>
    </listitem>

    <listitem>
      <para>18 July 2014</para>
      <itemizedlist>
        <listitem>
          <para>[Chris] - Changed title on Linux Headers installation pages
          to reduce potential confusion with previous Linux-Headers package.</para>
        </listitem>
      </itemizedlist>
    </listitem>

    <listitem>
      <para>14 July 2014</para>
      <itemizedlist>
        <listitem>
          <para>[Chris] - Modified instructions for mounting file systems
          for chroot so that they are all mounted before entering chroot, and
          added a tmpfs on /run. Took solution for /dev/shm symlink from LFS.
          Fixes ticket <ulink url="&clfs-ticket-root;971">#971</ulink>.</para>
        </listitem>
        <listitem>
          <para>[Chris] - Updated Linux sublevel to 3.14.12.</para>
        </listitem>
      </itemizedlist>
    </listitem>

    <listitem>
      <para>10 July 2014</para>
      <itemizedlist>
        <listitem>
          <para>[Chris] - Removed creation of /var/run/utmp - it's created
          on boot in the bootscripts.</para>
        </listitem>
        <listitem>
          <para>[Chris] - Removed creation of pidof from Sysvinit
          installation, to use pidof from Procps-ng instead.</para>
        </listitem>
      </itemizedlist>
    </listitem>

    <listitem>
      <para>02 July 2014</para>
      <itemizedlist>
        <listitem>
          <para>[William Harrington] - Update Linux subelevel patch to 3.14.10.</para>
        </listitem>
      </itemizedlist>
    </listitem>

    <listitem>
      <para>30 June 2014</para>
      <itemizedlist>
        <listitem>
          <para>[Chris] - Added documentation installation instructions
          for Zlib.</para>
        </listitem>
      </itemizedlist>
    </listitem>

    <listitem>
      <para>27 June 2014</para>
      <itemizedlist>
        <listitem>
          <para>[William Harrington] - Updated KMOD to 18. Fixes ticket
          <ulink url="&clfs-ticket-root;965">#965</ulink>.</para>
        </listitem>
      </itemizedlist>
    </listitem>

    <listitem>
      <para>20 June 2014</para>
      <itemizedlist>
        <listitem>
          <para>[William Harrington] - Remove <command>make -C man install
          </command> from final-system KMOD as man pages are installed during
          <command>make install</command>.</para>
        </listitem>
        <listitem>
          <para>[William Harrington] - Add Linux sublevel patch.</para>
        </listitem>
        <listitem>
          <para>[Chris] - Changed GMP documentation installation instructions
          to use the Makefile to install docs instead of doing so manually.</para>
        </listitem>
      </itemizedlist>
    </listitem>

    <listitem>
      <para>17 June 2014</para>
      <itemizedlist>
        <listitem>
          <para>[William Harrington] - Use --with-isl=system for temp-system
          CLooG.</para>
        </listitem>
      </itemizedlist>
    </listitem>

    <listitem>
      <para>17 June 2014</para>
      <itemizedlist>
        <listitem>
          <para>[William Harrington] - Move Man-DB right after Libpipeline.</para>
        </listitem>
      </itemizedlist>
    </listitem>

    <listitem>
      <para>15 June 2014</para>
      <itemizedlist>
        <listitem>
          <para>[Chris] - Added commands to create and install HTML
          documentation for MPC.</para>
        </listitem>
      </itemizedlist>
    </listitem>

    <listitem>
      <para>13 June 2014</para>
      <itemizedlist>
        <listitem>
          <para>[Chris] - Text updates to kernel installation page.</para>
        </listitem>
        <listitem>
          <para>[William Harrington - Update File to 5.19.</para>
        </listitem>
      </itemizedlist>
    </listitem>

    <listitem>
      <para>11 June 2014</para>
      <itemizedlist>
        <listitem>
          <para>[Chris] - Placed file before findutils in temp-system.</para>
        </listitem>
      </itemizedlist>
    </listitem>

    <listitem>
      <para>10 June 2014</para>
      <itemizedlist>
        <listitem>
          <para>[William Harrington] - Upgraded Gettext to 0.19.1.</para>
        </listitem>
      </itemizedlist>
    </listitem>

    <listitem>
      <para>04 June 2014</para>
      <itemizedlist>
        <listitem>
          <para>[Chris] - Added Introduction page to final-preps.</para>
        </listitem>
      </itemizedlist>
    </listitem>

    <listitem>
      <para>03 June 2014</para>
      <itemizedlist>
        <listitem>
          <para>[Chris] - Moved installation of /tools/include/libiberty.h
          from Cross-Tools to Temp-System.</para>
        </listitem>
        <listitem>
          <para>[Chris] - Moved creation of /var/run symlink to a more
          appropriate location in the Creating Directories page.</para>
        </listitem>
      </itemizedlist>
    </listitem>

    <listitem>
      <para>02 June 2014</para>
      <itemizedlist>
        <listitem>
          <para>[William Harrington] - Upgraded Gettext to 0.19.</para>
        </listitem>
      </itemizedlist>
    </listitem>

    <listitem>
      <para>01 June 2014</para>
      <itemizedlist>
        <listitem>
          <para>[Chris] - Upgraded GCC to 4.8.3.</para>
        </listitem>
        <listitem>
          <para>[William Harrington] - Upgraded Eudev to 1.7.</para>
        </listitem>
      </itemizedlist>
    </listitem>

    <listitem>
      <para>31 May 2014</para>
      <itemizedlist>
        <listitem>
          <para>[William Harrington] - Update Check to 0.9.13.</para>
        </listitem>
        <listitem>
          <para>[William Harrington] - Update Linux to 3.14.5.</para>
        </listitem>
        <listitem>
          <para>[William Harrington] - Update Vim 7.4 branch update patch to
          level 316.</para>
        </listitem>
      </itemizedlist>
    </listitem>

    <listitem>
      <para>30 May 2014</para>
      <itemizedlist>
        <listitem>
          <para>[William Harrington] - Add --host=${CLFS_TARGET} during
          cross-tools Pkg-config configure.</para>
        </listitem>
      </itemizedlist>
    </listitem>

    <listitem>
      <para>29 May 2014</para>
      <itemizedlist>
        <listitem>
          <para>[William Harrington] - Update Perl to 5.20.0.</para>
        </listitem>
        <listitem>
          <para>[Chris] - Edited "how" page - removed details about
          booting/chrooting and moved them to the "choose" page for temp-system.</para>
        </listitem>
      </itemizedlist>
    </listitem>

    <listitem>
      <para>28 May 2014</para>
      <itemizedlist>
        <listitem>
          <para>[William Harrington] - Upgrade TZData to 2014d.</para>
        </listitem>
        <listitem>
          <para>[William Harrington] - Upgrade Man-pages to 3.68.</para>
        </listitem>
      </itemizedlist>
    </listitem>

    <listitem>
      <para>25 May 2014</para>
      <itemizedlist>
        <listitem>
          <para>[William Harrington] - Upgrade Grep to 2.19.</para>
        </listitem>
      </itemizedlist>
    </listitem>

    <listitem>
      <para>24 May 2014</para>
      <itemizedlist>
        <listitem>
          <para>[Chris] - Moved Bc from Cross-Tools to Boot section, as it's
          only needed to compile the kernel.</para>
        </listitem>
        <listitem>
          <para>[Chris] - Moved "About ${CLFS}" page from final-preps to
          partitioning - best to have the page explaining ${CLFS} before it's
          actually used.</para>
        </listitem>
        <listitem>
          <para>[Chris] - Added creation of log files with passwd and group.</para>
        </listitem>
      </itemizedlist>
    </listitem>

    <listitem>
      <para>22 May 2014</para>
      <itemizedlist>
        <listitem>
          <para>[Chris] - Removed xgettext and msgmerge from temp-system
          Gettext - those are only needed for ACL/Attr.</para>
        </listitem>
        <listitem>
          <para>[Chris] - Swapped build order of Linux-headers and File in
          Cross-Tools - no particular reason for File to be after
          Linux-headers, so just make them alphabetical.</para>
        </listitem>
      </itemizedlist>
    </listitem>

    <listitem>
      <para>21 May 2014</para>
      <itemizedlist>
        <listitem>
          <para>[Chris] - Renamed Bootscripts chapter back to System
          Configuration - half that section doesn't involve bootscripts, and
          this allows for more consistency between different books .</para>
        </listitem>
        <listitem>
          <para>[Chris] - Rewrote Eudev page in system-config section.</para>
        </listitem>
        <listitem>
          <para>[William Harrington] - Update Man-pages to 3.67.</para>
        </listitem>
        <listitem>
          <para>[Chris] - Moved creation of /etc/fstab to system-config.</para>
        </listitem>
      </itemizedlist>
    </listitem>

    <listitem>
      <para>19 May 2014</para>
      <itemizedlist>
        <listitem>
          <para>[Chris] - Added commands to unset CFLAGS and CXXFLAGS to the
          clfs user's default .bashrc, and removed the separate page where
          this was done.</para>
        </listitem>
        <listitem>
          <para>[Chris] - Removed separate "Build flags" pages and moved that
          info to "Build Variables" pages, and moved those from cross-tools
          to final-preps.</para>
        </listitem>
      </itemizedlist>
    </listitem>

    <listitem>
      <para>18 May 2014</para>
      <itemizedlist>
        <listitem>
          <para>[Chris] - Added Pkg-config-lite to Cross-Tools and removed
          PKG_CONFIG parameters from temp-system and boot packages.</para>
        </listitem>
      </itemizedlist>
    </listitem>

    <listitem>
      <para>17 May 2014</para>
      <itemizedlist>
         <listitem>
          <para>[William Harrington] - Upgrade TZData to 2014c.</para>
        </listitem>
        <listitem>
          <para>[William Harrington] - Add --disable-werror to cross-tools
          Bintuils instructions.</para>
        </listitem>
        <listitem>
          <para>[William Harrington] - Move <command>logger</command> to
          <filename class="directory">/bin</filename> for CLFS-Bootscripts
          requirement.</para>
        </listitem>
        <listitem>
          <para>[Chris] - Changed "systemd" reference on Kbd page to
          CLFS Bootscripts, and added dumpkeys and kbd_mode to list of
          programs moved to /bin as they're used in the bootscripts.</para>
        </listitem>
      </itemizedlist>
    </listitem>

    <listitem>
      <para>14 May 2014</para>
      <itemizedlist>
        <listitem>
          <para>[Chris] - Created Sysvinit branch - removed Attr, ACL, D-Bus,
          Expat, Gperf, Intltool, Libcap, Systemd, XML::Parser, and added
          Libee, Libestr, Rsyslog.</para>
        </listitem>
      </itemizedlist>
    </listitem>

    <listitem>
      <para>11 May 2014</para>
      <itemizedlist>
        <listitem>
          <para>[Chris] - Added explanations for Essential Symlinks.</para>
        </listitem>
      </itemizedlist>
    </listitem>

    <listitem>
      <para>08 May 2014</para>
      <itemizedlist>
        <listitem>
          <para>[William Harrington] - Update Man-pages to 3.66.</para>
        </listitem>
        <listitem>
          <para>[William Harrington] - Add GDBM 1.11 to the books.</para>
        </listitem>
        <listitem>
          <para>[William Harrington] - Add Libpipeline 1.3.0 to the books.</para>
        </listitem>
        <listitem>
          <para>[William Harrington] - Add Man-DB 2.6.7.1 to the books.</para>
        </listitem>
        <listitem>
          <para>[William Harrington] - Remove Man-1.6g from the books.</para>
        </listitem>
        <listitem>
          <para>[William Harrington] - Remove zsoelim link from Groff.</para>
        </listitem>
      </itemizedlist>
    </listitem>

    <listitem>
      <para>06 May 2014</para>
      <itemizedlist>
        <listitem>
          <para>[Chris] - Removed unneeded configure switches specifying
          GMP/MPFR/MPC/ISL/CLOOG in /tools.</para>
        </listitem>
        <listitem>
          <para>[Chris] - Removed unneeded --libexecdir switches from
          temp-system GCC.</para>
        </listitem>
      </itemizedlist>
    </listitem>

    <listitem>
      <para>02 May 2014</para>
      <itemizedlist>
        <listitem>
          <para>[Chris] - Removed command to copy gconv-modules in Glibc
          instructions, as it is no longer needed.</para>
        </listitem>
      </itemizedlist>
    </listitem>

    <listitem>
      <para>30 April 2014</para>
      <itemizedlist>
        <listitem>
          <para>[Chris] - Added "PKG_CONFIG=" to boot section kmod commands,
          otherwise it will use pkg-config to find the "bash-completion"
          package and install stuff to that prefix if found. Thanks to boloco
          in IRC for finding this.</para>
        </listitem>
        <listitem>
          <para>[William Harrington] - Uprade DBus to 1.8.2.</para>
        </listitem>
      </itemizedlist>
    </listitem>

    <listitem>
      <para>28 April 2014</para>
      <itemizedlist>
        <listitem>
          <para>[Chris] - Remove all mentions of Alpha architecture, as it has
          not been tested for a long time.</para>
        </listitem>
      </itemizedlist>
    </listitem>

    <listitem>
      <para>27 April 2014</para>
      <itemizedlist>
        <listitem>
          <para>[William Harrington] - Update IPRoute2 to 3.14.0.</para>
        </listitem>
      </itemizedlist>
    </listitem>

    <listitem>
      <para>27 April 2014</para>
      <itemizedlist>
        <listitem>
          <para>[Chris] - Updated Acknowledgements page.</para>
        </listitem>
        <listitem>
          <para>[William Harrington] - Update Linux to 3.14.2.</para>
        </listitem>
      </itemizedlist>
    </listitem>

    <listitem>
      <para>26 April 2014</para>
      <itemizedlist>
        <listitem>
          <para>[Chris] - Renamed bootscripts package to boot-scripts
          (thanks to William Harrington for the suggestion) and removed the
          patch as it is not needed for the new package.</para>
        </listitem>
        <listitem>
          <para>[Chris] - Renamed bootscripts chapter to "System Configuration".</para>
        </listitem>
        <listitem>
          <para>[William Harrington] - Update Util-linux to 2.24.2.</para>
        </listitem>
        <listitem>
          <para>[Chris] - Added new page about how to view the book from
          inside the temporary boot environment.</para>
        </listitem>
        <listitem>
          <para>[Chris] - Don't move binaries from Findutils or Psmisc to /bin,
          as they're no longer needed there.</para>
        </listitem>
        <listitem>
          <para>[William Harrington] - Update Vim 7.4 branch update patch to
          level 265.</para>
        </listitem>
      </itemizedlist>
    </listitem>

    <listitem>
      <para>24 April 2014</para>
      <itemizedlist>
        <listitem>
          <para>[William Harrington] - Update Eudev to 1.6.</para>
        </listitem>
        <listitem>
          <para>[William Harrington] - Update Man-pages to 3.65.</para>
        </listitem>
        <listitem>
          <para>[William Harrington] - Update Bash branch update patch to level           11.</para>
        </listitem>
        <listitem>
          <para>[William Harrington] - Update Readline branch update patch to
          level 5.</para>
        </listitem>
      </itemizedlist>
    </listitem>

    <listitem>
      <para>22 April 2014</para>
      <itemizedlist>
        <listitem>
          <para>[Chris] - Removed several virtual filesystems from ${CLFS}/fstab
          for the boot method, as they're already mounted by the bootscript.</para>
        </listitem>
        <listitem>
          <para>[Chris] - Removed creation of gtbl and geqn symlinks, as they
          are no longer needed.</para>
        </listitem>
      </itemizedlist>
    </listitem>

    <listitem>
      <para>21 April 2014</para>
      <itemizedlist>
        <listitem>
          <para>[Chris] - Re-added manual creation of /usr/bin/perl symlink,
          as it is not created automatically under some circumstances.</para>
        </listitem>
      </itemizedlist>
    </listitem>

    <listitem>
      <para>20 April 2014</para>
      <itemizedlist>
        <listitem>
          <para>[Chris] - Reorganized "boot" section to allow everything
          to be installed into /tools, remove the need to chown ${CLFS} to the
          clfs user, and generally make the chapter's instructions flow better.</para>
        </listitem>
      </itemizedlist>
    </listitem>

    <listitem>
      <para>18 April 2014</para>
      <itemizedlist>
        <listitem>
          <para>[Chris] - Added --disable-makeinstall-setuid to temp-system
          Util-linux, as nothing there needs to be suid.</para>
        </listitem>
      </itemizedlist>
    </listitem>

    <listitem>
      <para>16 April 2014</para>
      <itemizedlist>
        <listitem>
          <para>[Chris] - Removed creation of /usr/bin/perl symlink, as
          Perl creates a link itself when installed.</para>
        </listitem>
      </itemizedlist>
    </listitem>

    <listitem>
      <para>13 April 2014</para>
      <itemizedlist>
        <listitem>
          <para>[Chris] - Updated most packages in the Boot section to install
          into /tools instead of $CLFS. Thanks to Martin Ward and
          William Harrington for assistance.</para>
        </listitem>
      </itemizedlist>
    </listitem>

    <listitem>
      <para>12 April 2014</para>
      <itemizedlist>
        <listitem>
          <para>[Chris] - Modified sysvinit installation to allow it
          to use /tools/etc/inittab and /tools/sbin/agetty.</para>
        </listitem>
        <listitem>
          <para>[Chris] - Moved Util-linux installation out of boot/chroot
          sections into the temp-system, as it can be installed the same
          way with either method.</para>
        </listitem>
      </itemizedlist>
    </listitem>

    <listitem>
      <para>11 April 2014</para>
      <itemizedlist>
        <listitem>
          <para>[Chris] - Updated MPC to 1.0.2.</para>
        </listitem>
        <listitem>
          <para>[Chris] - Removed unneeded --disable-login and --disable-su
          switches from Util-linux configure in boot/chroot sections.</para>
        </listitem>
      </itemizedlist>
    </listitem>

    <listitem>
      <para>09 April 2014</para>
      <itemizedlist>
        <listitem>
          <para>[William Harrington] - Update Eudev to 1.5.3.</para>
        </listitem>
      </itemizedlist>
    </listitem>

    <listitem>
      <para>09 April 2014</para>
      <itemizedlist>
        <listitem>
          <para>[Chris] - Remove obsolete --enable-cloog-backend
          parameter from GCC configure.</para>
        </listitem>
        <listitem>
          <para>[William Harrington] - Remove unneeded
          --disable-isl-version-check parameter from GCC configure.</para>
        </listitem>
        <listitem>
          <para>[William Harrington] - Update Gawk to 4.1.1.</para>
        </listitem>
      </itemizedlist>
    </listitem>

    <listitem>
      <para>08 April 2014</para>
      <itemizedlist>
        <listitem>
          <para>[William Harrington] - Add versioned doc directories for
          Automake, DBus, Flex, Gawk, Gettext, GMP, IPRoute2, KBD, MPFR,
          Readline, Sed, Tar, Util-linux and XZ.</para>
        </listitem>
      </itemizedlist>
    </listitem>

    <listitem>
      <para>06 April 2014</para>
      <itemizedlist>
        <listitem>
          <para>[William Harrington] - Update KMOD to 17.</para>
        </listitem>
        <listitem>
          <para>[William Harrington] - Update Man-pages to 3.64.</para>
        </listitem>
      </itemizedlist>
    </listitem>

    <listitem>
      <para>05 April 2014</para>
      <itemizedlist>
        <listitem>
          <para>[William Harrington] - Move Flex before Bison in final system
          and remove bison and flex from temp system.</para>
        </listitem>
        <listitem>
          <para>[William Harrington] - Add M4=m4 before configure command in
          final-system Bison and Flex.</para>
        </listitem>
        <listitem>
          <para>[William Harrington] - Remove Bison and Flex from temp system.</para>
        </listitem>
        <listitem>
          <para>[William Harrington] - Move M4 before GMP in final-system and
          remove M4 from temp system.</para>
        </listitem>
      </itemizedlist>
    </listitem>

    <listitem>
      <para>02 April 2014</para>
      <itemizedlist>
        <listitem>
          <para>[William Harrington] - Add test commands to Attr and Acl.</para>
        </listitem>
      </itemizedlist>
    </listitem>

    <listitem>
      <para>30 March 2014</para>
      <itemizedlist>
        <listitem>
          <para>[Chris] - Modified network section to split systemd/sysconfig
          network configurations.</para>
        </listitem>
        <listitem>
          <para>[Chris] - Removed instructions to install systemd manpages -
          they are now automatically installed by default.</para>
        </listitem>
        <listitem>
          <para>[Chris] - Updated installed program lists for several packages.</para>
        </listitem>
        <listitem>
          <para>[William Harrington] - Remove link of libl to libfl during Flex installation.</para>
        </listitem>
        <listitem>
          <para>[William Harrington] - Update DHCPCD to 6.3.2.</para>
        </listitem>
        <listitem>
          <para>[William Harrington] - Update VIM 7.4 patch to level 229.</para>
        </listitem>
        <listitem>
          <para>[William Harrington] - Update Bash 4.3 patch to level 8.</para>
        </listitem>
        <listitem>
          <para>[William Harrington] - Update Readline 6.3 patch to level 3.</para>
        </listitem>
        <listitem>
          <para>[William Harrington] - Update GCC 4.8.2 branch update patch to
          revision 208943.</para>
        </listitem>
      </itemizedlist>
    </listitem>

    <listitem>
      <para>23 March 2014</para>
      <itemizedlist>
        <listitem>
          <para>[William Harrington] - Update Man-pages to 3.63.</para>
        </listitem>
      </itemizedlist>
    </listitem>

    <listitem>
      <para>28 March 2014</para>
      <itemizedlist>
        <listitem>
          <para>[William Harrington] - Update File to 5.18.</para>
        </listitem>
        <listitem>
          <para>[William Harrington] - Update Flex to 2.5.39.</para>
        </listitem>
        <listitem>
          <para>[William Harrington] - Update Linux to 3.12.15.</para>
        </listitem>
        <listitem>
          <para>[William Harrington] - Update Systemd to 212.</para>
        </listitem>
        <listitem>
          <para>[William Harrington] - Update Tzdata to 2014b.</para>
        </listitem>
        <listitem>
          <para>[William Harrington] - Update GMP to 6.0.0a.</para>
        </listitem>
        <listitem>
          <para>[William Harrington] - Move Bison and Flex before Binutils.</para>
        </listitem>
      </itemizedlist>
    </listitem>

    <listitem>
      <para>17 March 2014</para>
      <itemizedlist>
        <listitem>
          <para>[William Harrington] - Remove libdbus and Update Systemd to 211.</para>
        </listitem>
        <listitem>
          <para>[William Harrington] - Add Systemd compat patch to install pkg-config files.</para>
        </listitem>
      </itemizedlist>
    </listitem>

    <listitem>
      <para>12 March 2014</para>
      <itemizedlist>
        <listitem>
          <para>[Chris] - Updated documentation installation instructions
          for Readline and Bash.</para>
        </listitem>
        <listitem>
          <para>[Chris] - Deleted --remove-destination parameter when creating
          /etc/localtime - it's no longer needed.</para>
        </listitem>
        <listitem>
          <para>[William Harrington] - Update Man-pages to 3.62.</para>
        </listitem>
      </itemizedlist>
    </listitem>

    <listitem>
      <para>10 March 2014</para>
      <itemizedlist>
        <listitem>
          <para>[William Harrington] - Update TZData to 2014a.</para>
        </listitem>
        <listitem>
          <para>[William Harrington] - Update MPFR fixes patch to patch level 5.</para>
        </listitem>
      </itemizedlist>
    </listitem>

    <listitem>
      <para>09 March 2014</para>
      <itemizedlist>
        <listitem>
          <para>[William Harrington] - Add configure command descriptions and testsuite commands to Systemd.</para>
        </listitem>
        <listitem>
          <para>[William Harrington] - Update testsuite description for D-BUS.</para>
        </listitem>
        <listitem>
          <para>[William Harrington] - Add note to final-system Util-Linux regarding extra functionality with libudev.</para>
        </listitem>
        <listitem>
          <para>[William Harrington] - Add commands and descriptions for <filename>/etc/adjtime</filename>.</para>
        </listitem>
      </itemizedlist>
    </listitem>

    <listitem>
      <para>02 March 2014</para>
      <itemizedlist>
        <listitem>
          <para>[William Harrington] - Update DHCPCD to 6.3.1.</para>
        </listitem>
      </itemizedlist>
    </listitem>

    <listitem>
      <para>27 February 2014</para>
      <itemizedlist>
        <listitem>
          <para>[William Harrington] - Update Grep to 2.18.</para>
        </listitem>
        <listitem>
          <para>[William Harrington] - Update DHCPCD to 6.3.0.</para>
        </listitem>
        <listitem>
          <para>[William Harrington] - Update Man-pages to 3.61.</para>
        </listitem>
        <listitem>
          <para>[William Harrington] - Update Readline to 6.3.</para>
        </listitem>
        <listitem>
          <para>[William Harrington] - Update Bash to 4.3.</para>
        </listitem>
      </itemizedlist>
    </listitem>

    <listitem>
      <para>24 February 2014</para>
      <itemizedlist>
        <listitem>
          <para>[William Harrington] - Remove installation of nscd tmpfile and unit service file in clfs-network-scripts.</para>
        </listitem>
      </itemizedlist>
    </listitem>

    <listitem>
      <para>23 February 2014</para>
      <itemizedlist>
        <listitem>
          <para>[William Harrington] - Add commands for <command>nscd</command>  config, runtime, and Systemd unit files installation to GLIBC.</para>
        </listitem>
      </itemizedlist>
    </listitem>

    <listitem>
      <para>18 February 2014</para>
      <itemizedlist>
        <listitem>
          <para>[William Harrington] - Migrate EGLIBC to GLIBC and upgrade to version 2.19.</para>
        </listitem>
        <listitem>
          <para>[William Harrington] - Update D-Bus to stable version 1.8.0.</para>
        </listitem>
        <listitem>
          <para>[William Harrington] - Update File to version 5.17.</para>
        </listitem>
        <listitem>
          <para>[William Harrington] - Update Grep to version 2.17.</para>
        </listitem>
        <listitem>
          <para>[William Harrington] - Update Linux to version 3.12.11.</para>
        </listitem>
        <listitem>
          <para>[William Harrington] - Update Man-pages to version 3.60.</para>
        </listitem>
        <listitem>
          <para>[William Harrington] - Update Psmisc to version 22.21.</para>
        </listitem>
      </itemizedlist>
    </listitem>

    <listitem>
      <para>13 February 2014</para>
      <itemizedlist>
        <listitem>
          <para>[William Harrington] - Correct nobody gid to use nogroup gid.</para>
        </listitem>
      </itemizedlist>
    </listitem>

    <listitem>
      <para>03 February 2014</para>
      <itemizedlist>
        <listitem>
          <para>[William Harrington] - Add configure options to systemd so loadkeys and setfont is searched in /bin instead of /usr/bin.</para>
        </listitem>
      </itemizedlist>
    </listitem>

    <listitem>
      <para>02 February 2014</para>
      <itemizedlist>
        <listitem>
          <para>[William Harrington] - Remove note in Iana-etc page and update iana-etc update numbers patch for proper operation with current iana-etc format.</para>
        </listitem>
      </itemizedlist>
    </listitem>

    <listitem>
      <para>29 January 2014</para>
      <itemizedlist>
        <listitem>
          <para>[William Harrington] - Add PKG_CONFIG= to temp-system make configure command.</para>
        </listitem>
      </itemizedlist>
    </listitem>

    <listitem>
      <para>27 January 2014</para>
      <itemizedlist>
        <listitem>
          <para>[William Harrington] - Add PERL=/usr/bin/perl to temp-system Texinfo build.</para>
        </listitem>
      </itemizedlist>
    </listitem>

    <listitem>
      <para>26 January 2014</para>
      <itemizedlist>
        <listitem>
          <para>[William Harrington] - Update LESS to 462.</para>
        </listitem>
      </itemizedlist>
    </listitem>

    <listitem>
      <para>25 January 2014</para>
      <itemizedlist>
        <listitem>
          <para>[William Harrington] - Create a link from /proc/self/mounts to /etc/mtab in boot and chroot createfiles section.</para>
        </listitem>
      </itemizedlist>
    </listitem>

    <listitem>
      <para>23 January 2014</para>
      <itemizedlist>
        <listitem>
          <para>[William Harrington] - Update text and redo some commands regarding Systemd in the System and Network configuration chapters.</para>
        </listitem>
        <listitem>
          <para>[William Harrington] - Add a clock configuration script to system configuration chapter with regards to systemd.</para>
        </listitem>
        <listitem>
          <para>[William Harrington] - Add CLFS-Network-Scripts and add commands to install them in the network configuration chapter.</para>
        </listitem>
        <listitem>
          <para>[William Harrington] - Update Util-linux to 2.24.1.</para>
        </listitem>
        <listitem>
          <para>[William Harrington] - Update Check to 0.9.12.</para>
        </listitem>
      </itemizedlist>
    </listitem>

    <listitem>
      <para>21 January 2014</para>
      <itemizedlist>
        <listitem>
          <para>[William Harrington] - Add D-Bus libraries before Systemd in final-system for a circular dependency issue.</para>
        </listitem>
      </itemizedlist>
    </listitem>

    <listitem>
      <para>19 January 2014</para>
      <itemizedlist>
        <listitem>
          <para>[William Harrington] - Update DHCPCD to 6.2.1.</para>
        </listitem>
        <listitem>
          <para>[William Harrington] - Use readlink when creating links for dynamic libraries for zlib, xz, ncurses, and readline.</para>
        </listitem>
      </itemizedlist>
    </listitem>

    <listitem>
      <para>13 January 2014</para>
      <itemizedlist>
        <listitem>
          <para>[William Harrington] - Update ISL to 0.12.2.</para>
        </listitem>
        <listitem>
          <para>[William Harrington] - Update Man-pages to 3.56.</para>
        </listitem>
      </itemizedlist>
    </listitem>

    <listitem>
      <para>10 January 2014</para>
      <itemizedlist>
        <listitem>
          <para>[William Harrington] - Migrate Procps to Procps-ng.</para>
        </listitem>
      </itemizedlist>
    </listitem>

    <listitem>
      <para>09 January 2014</para>
      <itemizedlist>
        <listitem>
          <para>[Chris] - Updated Linux to 3.12.7.</para>
        </listitem>
        <listitem>
          <para>[Chris] - Updated Perl to 5.18.2.</para>
        </listitem>
        <listitem>
          <para>[Chris] - Updated Gettext to 0.18.3.2.</para>
        </listitem>
        <listitem>
          <para>[Chris] - Updated Libcap to 2.24.</para>
        </listitem>
        <listitem>
          <para>[Chris] - Removed unneeded command to create a /usr/lib/terminfo
          symlink from Ncurses instructions.</para>
        </listitem>
        <listitem>
          <para>[Chris] - Removed /usr/{doc,info,man} symlinks and edited
          instructions for packages to ensure all documentation is installed
          to /usr/share.</para>
        </listitem>
        <listitem>
          <para>[Chris] - Moved libcap so it's built just before iputils,
          which can use libcap.</para>
        </listitem>
      </itemizedlist>
    </listitem>

    <listitem>
      <para>08 January 2014</para>
      <itemizedlist>
        <listitem>
          <para>[Chris] - Removed commands to create files in /var/run and
          /var/log - systemd now used its journal for all logs.</para>
        </listitem>
        <listitem>
          <para>[Chris] - Removed obsolete sed command from temp-system Coreutils.</para>
        </listitem>
        <listitem>
          <para>[Chris] - Removed unneeded command to rename stubs-64.h.</para>
        </listitem>
        <listitem>
          <para>[Chris] - Removed unneeded "make configure-host" commands
          from Binutils.</para>
        </listitem>
        <listitem>
          <para>[Chris] - Moved Attr and ACL to just after GCC in the final system.</para>
        </listitem>
      </itemizedlist>
    </listitem>

    <listitem>
      <para>07 January 2014</para>
      <itemizedlist>
        <listitem>
          <para>[Chris] - Added command, from LFS, to modify
          /tools/lib/libstdc++.la to prevent a /tools reference in the final system.</para>
        </listitem>
        <listitem>
          <para>[Chris] - Use libiberty from GCC, since Binutils no longer
          installs it by default.</para>
        </listitem>
      </itemizedlist>
    </listitem>

    <listitem>
      <para>06 January 2014</para>
      <itemizedlist>
        <listitem>
          <para>[Chris] - Added msgmerge and xgettext to /tools Gettext
          installation - needed for attr.</para>
        </listitem>
        <listitem>
          <para>[William Harrington] - Update DHCPCD to 6.2.0.</para>
        </listitem>
        <listitem>
          <para>[William Harrington] - Update Grep to 2.16.</para>
        </listitem>
      </itemizedlist>
    </listitem>

    <listitem>
      <para>05 January 2014</para>
      <itemizedlist>
        <listitem>
          <para>[Chris] - Removed rsyslog and its depedencies, libee and libestr.</para>
        </listitem>
        <listitem>
          <para>[Chris] - Updated Expat to 2.1.0.</para>
        </listitem>
        <listitem>
          <para>[Chris] - Updated Attr to 2.4.47.</para>
        </listitem>
        <listitem>
          <para>[Chris] - Updated D-Bus to 1.6.18.</para>
        </listitem>
        <listitem>
          <para>[Chris] - Updated Libcap to 2.23.</para>
        </listitem>
      </itemizedlist>
    </listitem>

    <listitem>
      <para>04 January 2014</para>
      <itemizedlist>
        <listitem>
          <para>[Chris] - Updated Systemd to 208.</para>
        </listitem>
        <listitem>
          <para>[Chris] - Added Gperf, XML::Parser, Intltool, and ACL - needed
          by systemd.</para>
        </listitem>
      </itemizedlist>
    </listitem>

    <listitem>
      <para>01 January 2014</para>
      <itemizedlist>
        <listitem>
          <para>[Chris] - Added command to EGLIBC instructions to remove
          extraneous '.x' files from /usr/include/rpcsvc.</para>
        </listitem>
      </itemizedlist>
    </listitem>

    <listitem>
      <para>23 December 2013</para>
      <itemizedlist>
        <listitem>
          <para>[William Harrington] - Update E2fsprogs to 1.42.9.</para>
        </listitem>
        <listitem>
          <para>[William Harrington] - Update Automake to 1.14.1.</para>
        </listitem>
      </itemizedlist>
    </listitem>

    <listitem>
      <para>21 December 2013</para>
      <itemizedlist>
        <listitem>
          <para>[William Harrington] - Update CLooG to 0.18.2.</para>
        </listitem>
        <listitem>
          <para>[William Harrington] - Update Tzdata to 2013i.</para>
        </listitem>
        <listitem>
          <para>[William Harrington] - Update EGLIBC 2.18 to revision 24829.</para>
        </listitem>
        <listitem>
          <para>[William Harrington] - Update Linux to 3.12.6.</para>
        </listitem>
      </itemizedlist>
    </listitem>

    <listitem>
      <para>14 December 2013</para>
      <itemizedlist>
        <listitem>
          <para>[William Harrington] - Update Coreutils to 8.22.</para>
        </listitem>
        <listitem>
          <para>[William Harrington] - Update Man-pages to 3.55.</para>
        </listitem>
      </itemizedlist>
    </listitem>

    <listitem>
      <para>08 December 2013</para>
      <itemizedlist>
        <listitem>
          <para>[William Harrington] - Update Bison to 3.0.2.</para>
        </listitem>
      </itemizedlist>
    </listitem>

    <listitem>
      <para>06 December 2013</para>
      <itemizedlist>
        <listitem>
          <para>[Chris] - Modified XZ instructions so that it won't install
          liblzma.{a,la} in /lib.</para>
        </listitem>
      </itemizedlist>
    </listitem>

    <listitem>
      <para>04 December 2013</para>
      <itemizedlist>
        <listitem>
          <para>[William Harrington] - Updated Binutils to version 2.24.</para>
        </listitem>
        <listitem>
          <para>[William Harrington] - Updated File to version 5.16.</para>
        </listitem>
      </itemizedlist>
    </listitem>

    <listitem>
      <para>26 November 2013</para>
      <itemizedlist>
        <listitem>
          <para>[Chris] - Updated installed program lists for several packages.</para>
        </listitem>
        <listitem>
          <para>[Chris] - Removed redundant --disable-su and --disable-login
          switches from Util-linux - they aren't built anyway if PAM isn't found.</para>
        </listitem>
      </itemizedlist>
    </listitem>

    <listitem>
      <para>25 November 2013</para>
      <itemizedlist>
        <listitem>
          <para>[William Harrington] - Update Iproute2 to 3.12.0.</para>
        </listitem>
        <listitem>
          <para>[William Harrington] - Update Tar to 1.27.1.</para>
        </listitem>
      </itemizedlist>
    </listitem>

    <listitem>
      <para>23 November 2013</para>
      <itemizedlist>
        <listitem>
          <para>[Chris] - Use nologin from Util-linux instead of Shadow.</para>
        </listitem>
      </itemizedlist>
    </listitem>

    <listitem>
      <para>22 November 2013</para>
      <itemizedlist>
        <listitem>
          <para>[Chris] - Util-linux now installs last and mesg by
          default, so use those instead of the versions in Sysvinit.</para>
        </listitem>
      </itemizedlist>
    </listitem>

    <listitem>
      <para>18 November 2013</para>
      <itemizedlist>
        <listitem>
          <para>[William Harrington] - Move creation of dummy groups and user to final-system Util-linux.</para>
        </listitem>
        <listitem>
          <para>[William Harrington] - Remove SUBDIRS variable from final-system Coreutils test command.</para>
        </listitem>
        <listitem>
          <para>[William Harrington] - Adjust Util-linux test commands.</para>
        </listitem>
      </itemizedlist>
    </listitem>

    <listitem>
      <para>13 November 2013</para>
      <itemizedlist>
        <listitem>
          <para>[William Harrington] - Adjust Util-linux check commands.</para>
        </listitem>
        <listitem>
          <para>[William Harrington] - Move Shadow before Util-Linux in final-system.</para>
        </listitem>
        <listitem>
          <para>[William Harrington] - Update Bison to 3.0.1.</para>
        </listitem>
        <listitem>
          <para>[William Harrington] - Remove Bison 3.0 eof patch.</para>
        </listitem>
      </itemizedlist>
    </listitem>

    <listitem>
      <para>11 November 2013</para>
      <itemizedlist>
        <listitem>
          <para>[William Harrington] - Update TZDATA to 2013h.</para>
        </listitem>
        <listitem>
          <para>[William Harrington] - Add MPFR 3.1.2 Fixes patch.</para>
        </listitem>
        <listitem>
          <para>[William Harrington] - Update Grep to 2.15.</para>
        </listitem>
        <listitem>
          <para>[William Harrington] - Update Linux to 3.12.</para>
        </listitem>
        <listitem>
          <para>[William Harrington] - Add a sed for Texinfo 5.x to all sections of Binutils.</para>
        </listitem>
        <listitem>
          <para>[William Harrington] - Update Texinfo to 5.2.</para>
        </listitem>
        <listitem>
          <para>[William Harrington] - Update KBD to 2.0.1.</para>
        </listitem>
        <listitem>
          <para>[William Harrington] - Update Check to 0.9.11.</para>
        </listitem>
        <listitem>
          <para>[William Harrington] - Update Automake to 1.14.</para>
        </listitem>
        <listitem>
          <para>[William Harrington] - Update Make to 4.0.</para>
        </listitem>
        <listitem>
          <para>[William Harrington] - Add a Sed command to EGLIBC for Make-4.x.</para>
        </listitem>
        <listitem>
          <para>[William Harrington] - Move Check to temp-system.</para>
        </listitem>
      </itemizedlist>
    </listitem>

    <listitem>
      <para>09 November 2013</para>
      <itemizedlist>
        <listitem>
          <para>[William Harrington] - Add PKG_CONFIG= in front of configure line for chroot and boot Util-linux for hosts with pkg-config installed.</para>
        </listitem>
      </itemizedlist>
    </listitem>

    <listitem>
      <para>25 October 2013</para>
      <itemizedlist>
       <listitem>
          <para>[William Harrington] - Updated Util-Linux to 2.24.</para>
        </listitem>
       <listitem>
          <para>[William Harrington] - Updated Tar to 1.27.</para>
        </listitem>
       <listitem>
          <para>[William Harrington] - Updated Linux to 3.10.17.</para>
        </listitem>
       <listitem>
          <para>[William Harrington] - Updated GCC to 4.8.2.</para>
        </listitem>
        <listitem>
          <para>[William Harrington] - Updated CLooG to 0.18.1.</para>
        </listitem>

        <listitem>
          <para>[William Harrington] - Changelog restarted, see the 2.1.0 book for the old changelog.</para>
        </listitem>
      </itemizedlist>
    </listitem>

  </itemizedlist>

</sect1>