source: BOOK/final-system/common/perl.xml@ 68b366a

clfs-1.2 clfs-2.1 clfs-3.0.0-systemd clfs-3.0.0-sysvinit systemd sysvinit
Last change on this file since 68b366a was 1da2a84, checked in by Joe Ciccone <jciccone@…>, 16 years ago

Checked and Updated Download Locations.
Updated Tree to 1.5.2.1.
Updated Util-Linux-NG to 2.14.1.
Updated TCL to 8.5.4.
Updated E2fsprogs to 1.41.1.
Updated M4 to 1.4.11.
Updated Kbd to 1.14.
Updated Bzip2 to 1.0.5.
Updated Autoconf to 2.63.
Updated Findutils to 4.4.0.
Updated Man-Pages to 3.09.
Updated Man to 1.6f.
Updated Shadow to 4.1.2.1.
Updated IPRoute2 to 2.6.26.
Updated Libtool to 2.2.6a.
Updated Module-Init-Tools to 3.4.1.
Updated Texinfo to 4.12.
Updated Vim to 7.2.
Updated MPFR to 2.3.2.
Updated Udev to 128.
Updated Linux to 2.6.26.5.
Applied fixes to Expect to make it compatible with TCL 8.5.
Add -Duseshrplib to the perl configure command. This causes perl to build a shared libperl.
Formatting fixes on multiple pages.
Use a Common inittab across all architectures.
Updated Bootscripts to 1.2-pre1.
  • Property mode set to 100644
File size: 15.8 KB
Line 
1<?xml version="1.0" encoding="ISO-8859-1"?>
2<!DOCTYPE sect1 PUBLIC "-//OASIS//DTD DocBook XML V4.5//EN"
3 "http://www.oasis-open.org/docbook/xml/4.5/docbookx.dtd" [
4 <!ENTITY % general-entities SYSTEM "../../general.ent">
5 %general-entities;
6]>
7
8<sect1 id="ch-system-perl" role="wrap">
9 <?dbhtml filename="perl.html"?>
10
11 <title>Perl-&perl-version;</title>
12
13 <indexterm zone="ch-system-perl">
14 <primary sortas="a-Perl">Perl</primary>
15 </indexterm>
16
17 <sect2 role="package">
18 <title/>
19
20 <para>The Perl package contains the Practical Extraction and Report
21 Language.</para>
22
23 </sect2>
24
25 <sect2 role="installation">
26 <title>Installation of Perl</title>
27
28 <para os="s1">The following sed causes <filename>DynaLoader.a</filename>
29 to be built with -fPIC so it can be linked into a shared library
30 later:</para>
31
32<screen os="s2"><userinput>sed -i -e "s@pldlflags=''@pldlflags=\"\$cccdlflags\"@g" \
33 -e "s@static_target='static'@static_target='static_pic'@g" Makefile.SH</userinput></screen>
34
35 <note os="a00">
36 <para>If you are following the boot method you will need to enable the
37 loopback device as well as set a hostname for some of the tests:</para>
38
39 <screen><userinput>ip link set lo up
40hostname clfs</userinput></screen>
41 </note>
42
43 <para os="a01">Before starting to configure, create a basic
44 <filename>/etc/hosts</filename> file which will be referenced by one
45 of Perl's configuration files as well as used by the testsuite:</para>
46
47<screen os="a02"><userinput>echo "127.0.0.1 localhost $(hostname)" &gt; /etc/hosts</userinput></screen>
48
49 <para os="a">To have full control over the way Perl is set up, you can
50 run the interactive <command>Configure</command> script and hand-pick
51 the way this package is built. If you prefer instead to use the defaults
52 that Perl auto-detects, prepare Perl for compilation with:</para>
53
54<screen os="b"><userinput>CC=gcc ./configure.gnu --prefix=/usr \
55 -Dman1dir=/usr/share/man/man1 \
56 -Dman3dir=/usr/share/man/man3 \
57 -Dpager="/bin/less -isR" \
58 -Dusethreads -Duseshrplib</userinput></screen>
59
60 <variablelist os="c">
61 <title>The meaning of the configure option:</title>
62
63 <varlistentry os="c1">
64 <term><parameter>-Dpager="/bin/less -isR"</parameter></term>
65 <listitem>
66 <para>This corrects an error in the way that <command>perldoc</command>
67 invokes the <command>less</command> program.</para>
68 </listitem>
69 </varlistentry>
70
71 <varlistentry os="c2">
72 <term><parameter>-Dman1dir=/usr/share/man/man1 -Dman3dir=/usr/share/man/man3</parameter></term>
73 <listitem>
74 <para>Since Groff is not installed yet,
75 <command>configure.gnu</command> thinks that we do not want
76 man pages for Perl. Issuing these parameters overrides this decision.</para>
77 </listitem>
78 </varlistentry>
79
80 <varlistentry os="c3">
81 <term><parameter>-Dusethreads</parameter></term>
82 <listitem>
83 <para>This tells Perl to use threads.</para>
84 </listitem>
85 </varlistentry>
86
87 <varlistentry os="c4">
88 <term><parameter>-Duseshrplib</parameter></term>
89 <listitem>
90 <para>This tells Perl to build a shared libperl.</para>
91 </listitem>
92 </varlistentry>
93
94 </variablelist>
95
96 <para os="d">Compile the package:</para>
97
98<screen os="e"><userinput>make</userinput></screen>
99
100 <para os="h">To test the results, issue:
101 <userinput>make test</userinput>.</para>
102
103 <para os="j">Install the package:</para>
104
105<screen os="k"><userinput>make install</userinput></screen>
106
107 </sect2>
108
109 <sect2 id="contents-perl" role="content">
110 <title>Contents of Perl</title>
111
112 <segmentedlist>
113 <segtitle>Installed programs</segtitle>
114 <segtitle>Installed libraries</segtitle>
115
116 <seglistitem>
117 <seg>a2p, c2ph, cpan, dprofpp, enc2xs, find2perl, h2ph, h2xs, instmodsh, libnetcfg,
118 perl, perl&perl-version; (link to perl), perlbug, perlcc, perldoc,
119 perlivp, piconv, pl2pm, pod2html, pod2latex, pod2man, pod2text,
120 pod2usage, podchecker, podselect, prove, psed (link to s2p), pstruct (link
121 to c2ph), s2p, splain, and xsubpp</seg>
122 <seg>Several hundred which cannot all be listed here</seg>
123 </seglistitem>
124 </segmentedlist>
125
126 <variablelist>
127 <bridgehead renderas="sect3">Short Descriptions</bridgehead>
128 <?dbfo list-presentation="list"?>
129 <?dbhtml list-presentation="table"?>
130
131 <varlistentry id="a2p">
132 <term><command>a2p</command></term>
133 <listitem>
134 <para>Translates awk to Perl</para>
135 <indexterm zone="ch-system-perl a2p">
136 <primary sortas="b-a2p">a2p</primary>
137 </indexterm>
138 </listitem>
139 </varlistentry>
140
141 <varlistentry id="c2ph">
142 <term><command>c2ph</command></term>
143 <listitem>
144 <para>Dumps C structures as generated from
145 <command>cc -g -S</command></para>
146 <indexterm zone="ch-system-perl c2ph">
147 <primary sortas="b-c2ph">c2ph</primary>
148 </indexterm>
149 </listitem>
150 </varlistentry>
151
152 <varlistentry id="cpan">
153 <term><command>cpan</command></term>
154 <listitem>
155 <para>Shell script that provides a command interface to CPAN.pm</para>
156 <indexterm zone="ch-system-perl cpan">
157 <primary sortas="b-cpan">cpan</primary>
158 </indexterm>
159 </listitem>
160 </varlistentry>
161
162 <varlistentry id="dprofpp">
163 <term><command>dprofpp</command></term>
164 <listitem>
165 <para>Displays Perl profile data</para>
166 <indexterm zone="ch-system-perl dprofpp">
167 <primary sortas="b-dprofpp">dprofpp</primary>
168 </indexterm>
169 </listitem>
170 </varlistentry>
171
172 <varlistentry id="enc2xs">
173 <term><command>enc2xs</command></term>
174 <listitem>
175 <para>Builds a Perl extension for the Encode module from either
176 Unicode Character Mappings or Tcl Encoding Files</para>
177 <indexterm zone="ch-system-perl enc2xs">
178 <primary sortas="b-enc2xs">enc2xs</primary>
179 </indexterm>
180 </listitem>
181 </varlistentry>
182
183 <varlistentry id="find2perl">
184 <term><command>find2perl</command></term>
185 <listitem>
186 <para>Translates <command>find</command> commands to Perl</para>
187 <indexterm zone="ch-system-perl find2perl">
188 <primary sortas="b-find2perl">find2perl</primary>
189 </indexterm>
190 </listitem>
191 </varlistentry>
192
193 <varlistentry id="h2ph">
194 <term><command>h2ph</command></term>
195 <listitem>
196 <para>Converts <filename class="extension">.h</filename> C header
197 files to <filename class="extension">.ph</filename> Perl header
198 files</para>
199 <indexterm zone="ch-system-perl h2ph">
200 <primary sortas="b-h2ph">h2ph</primary>
201 </indexterm>
202 </listitem>
203 </varlistentry>
204
205 <varlistentry id="h2xs">
206 <term><command>h2xs</command></term>
207 <listitem>
208 <para>Converts <filename class="extension">.h</filename> C header
209 files to Perl extensions</para>
210 <indexterm zone="ch-system-perl h2xs">
211 <primary sortas="b-h2xs">h2xs</primary>
212 </indexterm>
213 </listitem>
214 </varlistentry>
215
216 <varlistentry id="libnetcfg">
217 <term><command>libnetcfg</command></term>
218 <listitem>
219 <para>Can be used to configure the
220 <filename class="libraryfile">libnet</filename></para>
221 <indexterm zone="ch-system-perl libnetcfg">
222 <primary sortas="b-libnetcfg">libnetcfg</primary>
223 </indexterm>
224 </listitem>
225 </varlistentry>
226
227 <varlistentry id="instmodsh">
228 <term><command>instmodsh</command></term>
229 <listitem>
230 <para>A shell script for examining installed Perl modules,
231 and can even create a tarball from an installed module</para>
232 <indexterm zone="ch-system-perl instmodsh">
233 <primary sortas="b-instmodsh">instmodsh</primary>
234 </indexterm>
235 </listitem>
236 </varlistentry>
237
238 <varlistentry id="perl">
239 <term><command>perl</command></term>
240 <listitem>
241 <para>Combines some of the best features of C, <command>sed</command>,
242 <command>awk</command> and <command>sh</command> into a single
243 swiss-army-knife language</para>
244 <indexterm zone="ch-system-perl perl">
245 <primary sortas="b-perl">perl</primary>
246 </indexterm>
247 </listitem>
248 </varlistentry>
249
250 <varlistentry id="perl-version">
251 <term><command>perl&perl-version;</command></term>
252 <listitem>
253 <para>A hard link to <command>perl</command></para>
254 <indexterm zone="ch-system-perl perl-version">
255 <primary sortas="b-perl&perl-version;">perl&perl-version;</primary>
256 </indexterm>
257 </listitem>
258 </varlistentry>
259
260 <varlistentry id="perlbug">
261 <term><command>perlbug</command></term>
262 <listitem>
263 <para>Used to generate bug reports about Perl, or the modules that come
264 with it, and mail them</para>
265 <indexterm zone="ch-system-perl perlbug">
266 <primary sortas="b-perlbug">perlbug</primary>
267 </indexterm>
268 </listitem>
269 </varlistentry>
270
271 <varlistentry id="perlcc">
272 <term><command>perlcc</command></term>
273 <listitem>
274 <para>Generates executables from Perl programs</para>
275 <indexterm zone="ch-system-perl perlcc">
276 <primary sortas="b-perlcc">perlcc</primary>
277 </indexterm>
278 </listitem>
279 </varlistentry>
280
281 <varlistentry id="perldoc">
282 <term><command>perldoc</command></term>
283 <listitem>
284 <para>Displays a piece of documentation in pod format that is embedded
285 in the Perl installation tree or in a Perl script</para>
286 <indexterm zone="ch-system-perl perldoc">
287 <primary sortas="b-perldoc">perldoc</primary>
288 </indexterm>
289 </listitem>
290 </varlistentry>
291
292 <varlistentry id="perlivp">
293 <term><command>perlivp</command></term>
294 <listitem>
295 <para>The Perl Installation Verification Procedure; it can be used to
296 verify that Perl and its libraries have been installed
297 correctly</para>
298 <indexterm zone="ch-system-perl perlivp">
299 <primary sortas="b-perlivp">perlivp</primary>
300 </indexterm>
301 </listitem>
302 </varlistentry>
303
304 <varlistentry id="piconv">
305 <term><command>piconv</command></term>
306 <listitem>
307 <para>A Perl version of the character encoding converter
308 <command>iconv</command></para>
309 <indexterm zone="ch-system-perl piconv">
310 <primary sortas="b-piconv">piconv</primary>
311 </indexterm>
312 </listitem>
313 </varlistentry>
314
315 <varlistentry id="pl2pm">
316 <term><command>pl2pm</command></term>
317 <listitem>
318 <para>A rough tool for converting Perl4
319 <filename class="extension">.pl</filename> files to Perl5
320 <filename class="extension">.pm</filename> modules</para>
321 <indexterm zone="ch-system-perl pl2pm">
322 <primary sortas="b-pl2pm">pl2pm</primary>
323 </indexterm>
324 </listitem>
325 </varlistentry>
326
327 <varlistentry id="pod2html">
328 <term><command>pod2html</command></term>
329 <listitem>
330 <para>Converts files from pod format to HTML format</para>
331 <indexterm zone="ch-system-perl pod2html">
332 <primary sortas="b-pod2html">pod2html</primary>
333 </indexterm>
334 </listitem>
335 </varlistentry>
336
337 <varlistentry id="pod2latex">
338 <term><command>pod2latex</command></term>
339 <listitem>
340 <para>Converts files from pod format to LaTeX format</para>
341 <indexterm zone="ch-system-perl pod2latex">
342 <primary sortas="b-pod2latex">pod2latex</primary>
343 </indexterm>
344 </listitem>
345 </varlistentry>
346
347 <varlistentry id="pod2man">
348 <term><command>pod2man</command></term>
349 <listitem>
350 <para>Converts pod data to formatted *roff input</para>
351 <indexterm zone="ch-system-perl pod2man">
352 <primary sortas="b-pod2man">pod2man</primary>
353 </indexterm>
354 </listitem>
355 </varlistentry>
356
357 <varlistentry id="pod2text">
358 <term><command>pod2text</command></term>
359 <listitem>
360 <para>Converts pod data to formatted ASCII text</para>
361 <indexterm zone="ch-system-perl pod2text">
362 <primary sortas="b-pod2text">pod2text</primary>
363 </indexterm>
364 </listitem>
365 </varlistentry>
366
367 <varlistentry id="pod2usage">
368 <term><command>pod2usage</command></term>
369 <listitem>
370 <para>Prints usage messages from embedded pod docs in files</para>
371 <indexterm zone="ch-system-perl pod2usage">
372 <primary sortas="b-pod2usage">pod2usage</primary>
373 </indexterm>
374 </listitem>
375 </varlistentry>
376
377 <varlistentry id="podchecker">
378 <term><command>podchecker</command></term>
379 <listitem>
380 <para>Checks the syntax of pod format documentation files</para>
381 <indexterm zone="ch-system-perl podchecker">
382 <primary sortas="b-podchecker">podchecker</primary>
383 </indexterm>
384 </listitem>
385 </varlistentry>
386
387 <varlistentry id="podselect">
388 <term><command>podselect</command></term>
389 <listitem>
390 <para>Displays selected sections of pod documentation</para>
391 <indexterm zone="ch-system-perl podselect">
392 <primary sortas="b-podselect">podselect</primary>
393 </indexterm>
394 </listitem>
395 </varlistentry>
396
397 <varlistentry id="prove">
398 <term><command>prove</command></term>
399 <listitem>
400 <para>A command-line tool for running tests against Test::Harness</para>
401 <indexterm zone="ch-system-perl prove">
402 <primary sortas="b-prove">prove</primary>
403 </indexterm>
404 </listitem>
405 </varlistentry>
406
407 <varlistentry id="psed">
408 <term><command>psed</command></term>
409 <listitem>
410 <para>A Perl version of the stream editor <command>sed</command></para>
411 <indexterm zone="ch-system-perl psed">
412 <primary sortas="b-psed">psed</primary>
413 </indexterm>
414 </listitem>
415 </varlistentry>
416
417 <varlistentry id="pstruct">
418 <term><command>pstruct</command></term>
419 <listitem>
420 <para>Dumps C structures as generated from <command>cc -g -S</command>
421 stabs</para>
422 <indexterm zone="ch-system-perl pstruct">
423 <primary sortas="b-pstruct">pstruct</primary>
424 </indexterm>
425 </listitem>
426 </varlistentry>
427
428 <varlistentry id="s2p">
429 <term><command>s2p</command></term>
430 <listitem>
431 <para>Translates <command>sed</command> to Perl</para>
432 <indexterm zone="ch-system-perl s2p">
433 <primary sortas="b-s2p">s2p</primary>
434 </indexterm>
435 </listitem>
436 </varlistentry>
437
438 <varlistentry id="splain">
439 <term><command>splain</command></term>
440 <listitem>
441 <para>Is used to force verbose warning diagnostics in Perl</para>
442 <indexterm zone="ch-system-perl splain">
443 <primary sortas="b-splain">splain</primary>
444 </indexterm>
445 </listitem>
446 </varlistentry>
447
448 <varlistentry id="xsubpp">
449 <term><command>xsubpp</command></term>
450 <listitem>
451 <para>Converts Perl XS code into C code</para>
452 <indexterm zone="ch-system-perl xsubpp">
453 <primary sortas="b-xsubpp">xsubpp</primary>
454 </indexterm>
455 </listitem>
456 </varlistentry>
457
458 </variablelist>
459
460 </sect2>
461
462</sect1>
Note: See TracBrowser for help on using the repository browser.