source: BOOK/bootable/ppc/yaboot.xml@ e680587

<?xml version="1.0" encoding="ISO-8859-1"?>
<!DOCTYPE sect1 PUBLIC "-//OASIS//DTD DocBook XML V4.5//EN"
  "http://www.oasis-open.org/docbook/xml/4.5/docbookx.dtd" [
  <!ENTITY % general-entities SYSTEM "../../general.ent">
  %general-entities;
]>

<sect1 id="ch-bootable-yaboot" arch="ppc">
  <?dbhtml filename="yaboot.html"?>

  <title>Making the CLFS System Bootable</title>

  <indexterm zone="ch-bootable-yaboot">
    <primary sortas="a-Yaboot">Yaboot</primary>
  <secondary>configuring</secondary></indexterm>

  <para os="a">Your shiny new CLFS system is almost complete. One of the last
  things to do is to ensure that the system can be properly booted. The
  instructions below apply only to NewWorld Macintoshes.</para>

  <para os="b">Boot loading can be a complex area, so a few cautionary words
  are in order. Be familiar with the current boot loader and any other
  operating systems present on the hard drive(s) that need to be bootable.
  Make sure that an emergency CD is ready to <quote>rescue</quote> the
  computer if it becomes un-bootable.  It is also a good idea to enable booting
  from Open Firmware in case things go really wrong.</para>

  <para os="c">Earlier, we compiled and installed the yaboot boot loader software
  in preparation for this step. The procedure involves writing the bootloader
  to a bootstrap partition and blessing it so that Open Firmware will boot from
  it.  This is all handled by <command>ybin</command>, the yaboot installer.</para>

  <para os="d">Ybin writes an optional 'OS selector' menu into Open Firmware,
  then writes yaboot and <filename>yaboot.conf</filename> to the bootstrap
  partition, blesses this, and updates the boot device recorded in nvram. When
  booted, the OF provides the initial menu to choose between linux, boot from
  CD, and e.g. OSX (depending on what was in <filename>yaboot.conf</filename>).
  If you boot to 'linux', yaboot is executed and lets you select which kernel
  to use.</para>

  <para os="e">Images (kernels) are specified, together with any necessary path,
  in <filename>yaboot.conf</filename> - the details are incorporated into the
  bootloader, but no attempt is made to access or validate the paths until
  they are selected. There are many possible options that can be specified in
  <filename>yaboot.conf</filename>, see the man page for the details. Most
  people will be able to specify device=hd: (for a single hard disk), but if
  you have multiple disks, or if you wish to be pedantic, you can specify the
  full OF path to the device, obtained by running <command>ofpath /dev/hdX</command>
  .</para>

  <para os="h">Using the above information, determine the appropriate designators
  for the bootstrap partition and the root partition. For the following example,
  it is assumed that the bootstrap partition is <filename class="partition">hda2
  </filename> and the root partition is <filename class="partition">hda7</filename>.
  We will also assume that you wish to be able to boot an OSX installation on
  <filename class="partition">hda4</filename>. Change these items as necessary
  for your machine.</para>

  <para os="i">If your machine has a SATA disk, specify the partitions using
  <filename class="devicefile">/dev/sda7</filename> and so forth in the usual
  way. At least some of the distros specify a full OF path to the 'device' and
  to the image(s), such as
  <parameter>device=/ht@0,f2000000/pci@3/k2-sata-root@c/k2-sata@0/disk@0:</parameter>
  for the disk, and
  <parameter>image=/ht@0,f2000000/pci@3/k2-sata-root@c/k2-sata@0/disk@0:9,/boot/clfskernel-&linux-version;</parameter>
  which definitely works.</para>

  <para os="k">Create a <quote>yaboot.conf</quote> file defining yaboot's boot
  menu:</para>

<screen os="l" role="nodump"><?dbfo keep-together="auto"?><userinput>cat &gt; /etc/yaboot.conf &lt;&lt; "EOF"
<literal># Begin /etc/yaboot.conf

# By default, yaboot will boot the first menu entry.

# Allow 10 seconds before booting the default.
# this will also apply to the first-stage os selector
timeout=100

# These variables are global
# first, where to put the bootstrap partition
boot=/dev/hda2

# Which disk to use
device=hd:

# Default partition for the kernel images
partition=7

# default root partition
root=/dev/hda7

# where ybin is to find yaboot and ofboot
install=/usr/lib/yaboot/yaboot
magicboot=/usr/lib/yaboot/ofboot

# allow the initial menu to offer CD as an option
enablecdboot

# allow the initial menu to offer booting from Open Firmware
enableofboot

# allow the initial menu to boot from mac osx
macosx=/dev/hda4

# white on black is boring!
# note  the spellings : 'fgcolor' but 'light'
# in this context, light means 'without high intensity'
fgcolor=light-green

# The first entry is for CLFS.
# For all images, the pathname is relative to the filesystem
# on which they are situated and can include at most one
# directory
image=/boot/clfskernel-&linux-version;
    label=&version;
    read-only</literal>
EOF</userinput></screen>


  <para os="n">Add an entry for the host distribution, if you have one. It might
  look something like this if the kernel and initrd are in the host's '/'
  directory on <filename class="partition">hda6</filename>:</para>

<screen os="o" role="nodump"><userinput>cat &gt;&gt; /etc/yaboot.conf &lt;&lt; "EOF"
<literal>title Debian
image=/pci@f4000000/ata-6d/disk@0:6,/vmlinux
    label=Debian
    initrd=/pci@f4000000/ata-6d/disk@0:6,/initrd.gz
    initrd-size=10000
    append="root=/dev/hda7"
    read-only</literal>
EOF</userinput></screen>

  <warning os="r">
    <para>The following command will update the bootstrap partition and the
    boot variable in Open Firmware. Do not run the command if this is not
    desired.</para>
  </warning>

<screen os="s" role="nodump"><userinput>ybin</userinput></screen>

  <para os="t">Alternatively, if the bootstrap partition has not already been
  initialized, perhaps because you are using a Live CD, you will need to use
  a different command to install the bootloader for the first time:</para>

<screen os="u" role="nodump"><userinput>mkofboot</userinput></screen>

</sect1>