source: BOOK/boot/common/sysvinit.xml@ 3faa5de

<?xml version="1.0" encoding="ISO-8859-1"?>
<!DOCTYPE sect1 PUBLIC "-//OASIS//DTD DocBook XML V4.5//EN"
  "http://www.oasis-open.org/docbook/xml/4.5/docbookx.dtd" [
  <!ENTITY % general-entities SYSTEM "../../general.ent">
  %general-entities;
]>

<sect1 id="ch-boot-sysvinit" role="wrap">
  <?dbhtml filename="sysvinit.html"?>

  <title>Sysvinit-&sysvinit-version;</title>

  <indexterm zone="ch-boot-sysvinit">
    <primary sortas="a-Sysvinit">Sysvinit</primary>
    <secondary>boot</secondary>
  </indexterm>

  <xi:include xmlns:xi="http://www.w3.org/2003/XInclude"
  href="../../final-system/common/sysvinit.xml"
  xpointer="xpointer(//*[@role='package'])"/>

  <sect2 role="installation">
    <title>Installation of Sysvinit</title>

    <para os="aa">Make some modifications to allow you to boot into
    the minimal temp-system:</para>

<screen os="ab"><userinput>cp -v src/Makefile src/Makefile.orig
sed -e 's@root@0@g' \
    -e "s@/dev/initctl@${CLFS}&amp;@g" \
    -e 's@\(mknod \)-m \([0-9]* \)\(.* \)p@\1\3p; chmod \2\3@g' \
    -e "s@/usr/lib@/tools/lib@" \
    src/Makefile.orig &gt; src/Makefile</userinput></screen>

    <xi:include xmlns:xi="http://www.w3.org/2003/XInclude"
    href="../../final-system/common/sysvinit.xml"
    xpointer="xpointer(//*[@os='c'])"/>

<screen os="ac"><userinput>make -C src clobber
make -C src CC="${CC}"</userinput></screen>

    <xi:include xmlns:xi="http://www.w3.org/2003/XInclude"
    href="../../final-system/common/sysvinit.xml"
    xpointer="xpointer(//*[@os='e'])"/>

<screen os="ad"><userinput>make -C src install INSTALL=install ROOT=${CLFS}</userinput></screen>

  </sect2>

  <sect2 id="conf-tools-sysvinit" role="configuration">
    <title>Configuring Sysvinit</title>

    <indexterm zone="conf-tools-sysvinit">
      <primary sortas="a-Sysvinit">Sysvinit</primary>
      <secondary>boot, configuring</secondary>
    </indexterm>

    <indexterm zone="conf-tools-sysvinit">
      <primary sortas="e-/etc/inittab">/etc/inittab</primary>
    </indexterm>

    <para>Create a new file <filename>${CLFS}/etc/inittab</filename> by running the
    following:</para>

<screen><userinput>cat &gt; ${CLFS}/etc/inittab &lt;&lt; "EOF"
<literal># Begin /etc/inittab

id:3:initdefault:

si::sysinit:/etc/rc.d/init.d/rc sysinit

l0:0:wait:/etc/rc.d/init.d/rc 0
l1:S1:wait:/etc/rc.d/init.d/rc 1
l2:2:wait:/etc/rc.d/init.d/rc 2
l3:3:wait:/etc/rc.d/init.d/rc 3
l4:4:wait:/etc/rc.d/init.d/rc 4
l5:5:wait:/etc/rc.d/init.d/rc 5
l6:6:wait:/etc/rc.d/init.d/rc 6

ca:12345:ctrlaltdel:/sbin/shutdown -t1 -a -r now

su:S016:once:/sbin/sulogin
</literal>
EOF</userinput></screen>

    <para>The following command adds the standard virtual terminals to
    <filename>${CLFS}/etc/inittab</filename>. If your system only has a serial
    console skip the following command:</para>

<screen><userinput>cat &gt;&gt; ${CLFS}/etc/inittab &lt;&lt; "EOF"
<literal>1:2345:respawn:/sbin/agetty -I '\033(K' tty1 9600
2:2345:respawn:/sbin/agetty -I '\033(K' tty2 9600
3:2345:respawn:/sbin/agetty -I '\033(K' tty3 9600
4:2345:respawn:/sbin/agetty -I '\033(K' tty4 9600
5:2345:respawn:/sbin/agetty -I '\033(K' tty5 9600
6:2345:respawn:/sbin/agetty -I '\033(K' tty6 9600
</literal>
EOF</userinput></screen>

    <para>If your system has a serial console, run the following command to add
    the entry to <filename>${CLFS}/etc/inittab</filename>.</para>

<screen><userinput>cat &gt;&gt; ${CLFS}/etc/inittab &lt;&lt; "EOF"
<literal>c0:12345:respawn:/sbin/agetty 115200 ttyS0 vt100
</literal>
EOF</userinput></screen>

   <para>Finally, add the end line to <filename>${CLFS}/etc/inittab</filename>.</para>

<screen><userinput>cat &gt;&gt; ${CLFS}/etc/inittab &lt;&lt; "EOF"
<literal># End /etc/inittab</literal>
EOF</userinput></screen>

  </sect2>

  <sect2 role="content">
    <title/>

    <para>Details on this package are located in <xref
    linkend="contents-sysvinit" role="."/></para>

  </sect2>

</sect1>